ASTM Standards Source (Online and DVD-ROM):
Building Codes/Construction Combo Collection

Return to Previous Page

TABLE OF CONTENTS
(Standards will be added, revised or withdrawn on an ongoing basis.)

A1 Standard Specification for Carbon Steel Tee Rails
A6/A6M Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
A27/A27M Standard Specification for Steel Castings, Carbon, for General Application
A29/A29M Standard Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
A36/A36M Standard Specification for Carbon Structural Steel
A47/A47M Standard Specification for Ferritic Malleable Iron Castings
A48/A48M Standard Specification for Gray Iron Castings
A53/A53M Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless
A74 Standard Specification for Cast Iron Soil Pipe and Fittings
A82/A82M Standard Specification for Steel Wire, Plain, for Concrete Reinforcement
A90/A90M Standard Test Method for Weight [Mass] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
A105/A105M Standard Specification for Carbon Steel Forgings for Piping Applications
A106/A106M Standard Specification for Seamless Carbon Steel Pipe for High-Temperature Service
A108 Standard Specification for Steel Bar, Carbon and Alloy, Cold-Finished
A109/A109M Standard Specification for Steel, Strip, Carbon (0.25 Maximum Percent), Cold-Rolled
A116 Standard Specification for Metallic-Coated, Steel Woven Wire Fence Fabric
A121 Standard Specification for Metallic-Coated Carbon Steel Barbed Wire
A123/A123M Standard Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
A126 Standard Specification for Gray Iron Castings for Valves, Flanges, and Pipe Fittings
A131/A131M Standard Specification for Structural Steel for Ships
A135/A135M Standard Specification for Electric-Resistance-Welded Steel Pipe
A139/A139M Standard Specification for Electric-Fusion (Arc)-Welded Steel Pipe (NPS 4 and Over)
A148/A148M Standard Specification for Steel Castings, High Strength, for Structural Purposes
A153/A153M Standard Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
A167 Standard Specification for Stainless and Heat-Resisting Chromium-Nickel Steel Plate, Sheet, and Strip
A176 Standard Specification for Stainless and Heat-Resisting Chromium Steel Plate, Sheet, and Strip
A178/A178M Standard Specification for Electric-Resistance-Welded Carbon Steel and Carbon-Manganese Steel Boiler and Superheater Tubes
A182/A182M Standard Specification for Forged or Rolled Alloy and Stainless Steel Pipe Flanges, Forged Fittings, and Valves and Parts for High-Temperature Service
A183 Standard Specification for Carbon Steel Track Bolts and Nuts
A184/A184M Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
A185/A185M Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
A193/A193M Standard Specification for Alloy-Steel and Stainless Steel Bolting for High Temperature or High Pressure Service and Other Special Purpose Applications
A194/A194M Standard Specification for Carbon and Alloy Steel Nuts for Bolts for High Pressure or High Temperature Service, or Both
A197/A197M Standard Specification for Cupola Malleable Iron
A213/A213M Standard Specification for Seamless Ferritic and Austenitic Alloy-Steel Boiler, Superheater, and Heat-Exchanger Tubes
A216/A216M Standard Specification for Steel Castings, Carbon, Suitable for Fusion Welding, for High-Temperature Service
A229/A229M Standard Specification for Steel Wire, Quenched and Tempered for Mechanical Springs
A234/A234M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Moderate and High Temperature Service
A239 Standard Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles
A240/A240M Standard Specification for Chromium and Chromium-Nickel Stainless Steel Plate, Sheet, and Strip for Pressure Vessels and for General Applications
A242/A242M Standard Specification for High-Strength Low-Alloy Structural Steel
A249/A249M Standard Specification for Welded Austenitic Steel Boiler, Superheater, Heat-Exchanger, and Condenser Tubes
A252 Standard Specification for Welded and Seamless Steel Pipe Piles
A254 Standard Specification for Copper-Brazed Steel Tubing
A262 Standard Practices for Detecting Susceptibility to Intergranular Attack in Austenitic Stainless Steels
A264 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate
A269 Standard Specification for Seamless and Welded Austenitic Stainless Steel Tubing for General Service
A270/A270M Standard Specification for Seamless and Welded Austenitic Stainless Steel Sanitary Tubing
A276 Standard Specification for Stainless Steel Bars and Shapes
A278/A278M Standard Specification for Gray Iron Castings for Pressure-Containing Parts for Temperatures Up to 650°F (350°C)
A283/A283M Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
A307 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
A308/A308M Standard Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
A309 Standard Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
A312/A312M Standard Specification for Seamless, Welded, and Heavily Cold Worked Austenitic Stainless Steel Pipes
A313/A313M Standard Specification for Stainless Steel Spring Wire
A320/A320M Standard Specification for Alloy-Steel and Stainless Steel Bolting for Low-Temperature Service
A325M Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]
A325 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
A328/A328M Standard Specification for Steel Sheet Piling
A333/A333M Standard Specification for Seamless and Welded Steel Pipe for Low-Temperature Service
A334/A334M Standard Specification for Seamless and Welded Carbon and Alloy-Steel Tubes for Low-Temperature Service
A342/A342M Standard Test Methods for Permeability of Feebly Magnetic Materials
A351/A351M Standard Specification for Castings, Austenitic, for Pressure-Containing Parts
A354 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
A370 Standard Test Methods and Definitions for Mechanical Testing of Steel Products
A376/A376M Standard Specification for Seamless Austenitic Steel Pipe for High-Temperature Central-Station Service
A377 Standard Index of Specifications for Ductile-Iron Pressure Pipe
A381 Standard Specification for Metal-Arc-Welded Steel Pipe for Use With High-Pressure Transmission Systems
A390 Standard Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
A391/A391M Standard Specification for Grade 80 Alloy Steel Chain
A392 Standard Specification for Zinc-Coated Steel Chain-Link Fence Fabric
A395/A395M Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures
A403/A403M Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
A413/A413M Standard Specification for Carbon Steel Chain
A416/A416M Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
A420/A420M Standard Specification for Piping Fittings of Wrought Carbon Steel and Alloy Steel for Low-Temperature Service
A421/A421M Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
A424/A424M Standard Specification for Steel, Sheet, for Porcelain Enameling
A428/A428M Standard Test Method for Weight [Mass] of Coating on Aluminum-Coated Iron or Steel Articles
A435/A435M Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates
A449 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
A463/A463M Standard Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
A466/A466M Standard Specification for Weldless Chain
A467/A467M Standard Specification for Machine and Coil Chain
A475 Standard Specification for Zinc-Coated Steel Wire Strand
A478 Standard Specification for Chromium-Nickel Stainless Steel Weaving and Knitting Wire
A479/A479M Standard Specification for Stainless Steel Bars and Shapes for Use in Boilers and Other Pressure Vessels
A480/A480M Standard Specification for General Requirements for Flat-Rolled Stainless and Heat-Resisting Steel Plate, Sheet, and Strip
A489 Standard Specification for Carbon Steel Lifting Eyes
A490 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
A490M Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
A491 Standard Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
A492 Standard Specification for Stainless Steel Rope Wire
A496/A496M Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement
A497/A497M Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
A499 Standard Specification for Steel Bars and Shapes, Carbon Rolled from “T” Rails
A500/A500M Standard Specification for Cold-Formed Welded and Seamless Carbon Steel Structural Tubing in Rounds and Shapes
A501 Standard Specification for Hot-Formed Welded and Seamless Carbon Steel Structural Tubing
A510/A510M Standard Specification for General Requirements for Wire Rods and Coarse Round Wire, Carbon Steel
A513 Standard Specification for Electric-Resistance-Welded Carbon and Alloy Steel Mechanical Tubing
A514/A514M Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
A516/A516M Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
A517/A517M Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
A518/A518M Standard Specification for Corrosion-Resistant High-Silicon Iron Castings
A524 Standard Specification for Seamless Carbon Steel Pipe for Atmospheric and Lower Temperatures
A529/A529M Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality
A532/A532M Standard Specification for Abrasion-Resistant Cast Irons
A536 Standard Specification for Ductile Iron Castings
A537/A537M Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
A554 Standard Specification for Welded Stainless Steel Mechanical Tubing
A555/A555M Standard Specification for General Requirements for Stainless Steel Wire and Wire Rods
A563 Standard Specification for Carbon and Alloy Steel Nuts
A563M Standard Specification for Carbon and Alloy Steel Nuts [Metric]
A568/A568M Standard Specification for Steel, Sheet, Carbon, Structural, and High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, General Requirements for
A572/A572M Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
A573/A573M Standard Specification for Structural Carbon Steel Plates of Improved Toughness
A574 Standard Specification for Alloy Steel Socket-Head Cap Screws
A574M Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)
A575 Standard Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
A578/A578M Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
A580/A580M Standard Specification for Stainless Steel Wire
A582/A582M Standard Specification for Free-Machining Stainless Steel Bars
A586 Standard Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
A588/A588M Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance
A595/A595M Standard Specification for Steel Tubes, Low-Carbon or High-Strength Low-Alloy, Tapered for Structural Use
A603 Standard Specification for Zinc-Coated Steel Structural Wire Rope
A606/A606M Standard Specification for Steel, Sheet and Strip, High-Strength, Low-Alloy, Hot-Rolled and Cold-Rolled, with Improved Atmospheric Corrosion Resistance
A615/A615M Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
A618/A618M Standard Specification for Hot-Formed Welded and Seamless High-Strength Low-Alloy Structural Tubing
A625/A625M Standard Specification for Tin Mill Products, Black Plate, Single-Reduced
A627 Standard Test Methods for Tool-Resisting Steel Bars, Flats, and Shapes for Detention and Correctional Facilities
A633/A633M Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
A635/A635M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Alloy, Carbon, Structural, High-Strength Low-Alloy, and High-Strength Low-Alloy with Improved Formability, General Requirements for
A641/A641M Standard Specification for Zinc-Coated (Galvanized) Carbon Steel Wire
A645/A645M Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated
A653/A653M Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
A656/A656M Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
A666 Standard Specification for Annealed or Cold-Worked Austenitic Stainless Steel Sheet, Strip, Plate, and Flat Bar
A668/A668M Standard Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
A671/A671M Standard Specification for Electric-Fusion-Welded Steel Pipe for Atmospheric and Lower Temperatures
A673/A673M Standard Specification for Sampling Procedure for Impact Testing of Structural Steel
A674 Standard Practice for Polyethylene Encasement for Ductile Iron Pipe for Water or Other Liquids
A675/A675M Standard Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
A690/A690M Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
A703/A703M Standard Specification for Steel Castings, General Requirements, for Pressure-Containing Parts
A704/A704M Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
A706/A706M Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
A709/A709M Standard Specification for Structural Steel for Bridges
A710/A710M Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
A716 Standard Specification for Ductile Iron Culvert Pipe
A722/A722M Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
A727/A727M Standard Specification for Carbon Steel Forgings for Piping Components with Inherent Notch Toughness
A733 Standard Specification for Welded and Seamless Carbon Steel and Austenitic Stainless Steel Pipe Nipples
A741 Standard Specification for Metallic-Coated Steel Wire Rope and Fittings for Highway Guardrail
A743/A743M Standard Specification for Castings, Iron-Chromium, Iron-Chromium-Nickel, Corrosion Resistant, for General Application
A746 Standard Specification for Ductile Iron Gravity Sewer Pipe
A755/A755M Standard Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
A759 Standard Specification for Carbon Steel Crane Rails
A760/A760M Standard Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
A764 Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs
A767/A767M Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
A770/A770M Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
A775/A775M Standard Specification for Epoxy-Coated Steel Reinforcing Bars
A778 Standard Specification for Welded, Unannealed Austenitic Stainless Steel Tubular Products
A780/A780M Standard Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
A786/A786M Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
A792/A792M Standard Specification for Steel Sheet, 55 % Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
A793 Standard Specification for Rolled Floor Plate, Stainless Steel
A794/A794M Standard Specification for Commercial Steel (CS), Sheet, Carbon (0.16 % Maximum to 0.25 % Maximum), Cold-Rolled
A795/A795M Standard Specification for Black and Hot-Dipped Zinc-Coated (Galvanized) Welded and Seamless Steel Pipe for Fire Protection Use
A798/A798M Standard Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
A809 Standard Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
A815/A815M Standard Specification for Wrought Ferritic, Ferritic/Austenitic, and Martensitic Stainless Steel Piping Fittings
A817 Standard Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
A820/A820M Standard Specification for Steel Fibers for Fiber-Reinforced Concrete
A824 Standard Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
A847/A847M Standard Specification for Cold-Formed Welded and Seamless High-Strength, Low-Alloy Structural Tubing with Improved Atmospheric Corrosion Resistance
A857/A857M Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage
A861 Standard Specification for High-Silicon Iron Pipe and Fittings
A865/A865M Standard Specification for Threaded Couplings, Steel, Black or Zinc-Coated (Galvanized) Welded or Seamless, for Use in Steel Pipe Joints
A871/A871M Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
A875/A875M Standard Specification for Steel Sheet, Zinc-5 % Aluminum Alloy-Coated by the Hot-Dip Process
A879/A879M Standard Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
A884/A884M Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
A886/A886M Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
A888 Standard Specification for Hubless Cast Iron Soil Pipe and Fittings for Sanitary and Storm Drain, Waste, and Vent Piping Applications
A898/A898M Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
A899 Standard Specification for Steel Wire, Epoxy-Coated
A913/A913M Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process
A924/A924M Standard Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
A929/A929M Standard Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
A934/A934M Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
A951/A951M Standard Specification for Steel Wire for Masonry Joint Reinforcement
A955/A955M Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
A959 Standard Guide for Specifying Harmonized Standard Grade Compositions for Wrought Stainless Steels
A992/A992M Standard Specification for Structural Steel Shapes
A996/A996M Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
A1003/A1003M Standard Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
A1008/A1008M Standard Specification for Steel, Sheet, Cold-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, Solution Hardened, and Bake Hardenable
A1011/A1011M Standard Specification for Steel, Sheet and Strip, Hot-Rolled, Carbon, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1016/A1016M Standard Specification for General Requirements for Ferritic Alloy Steel, Austenitic Alloy Steel, and Stainless Steel Tubes
A1018/A1018M Standard Specification for Steel, Sheet and Strip, Heavy-Thickness Coils, Hot-Rolled, Carbon, Commercial, Drawing, Structural, High-Strength Low-Alloy, High-Strength Low-Alloy with Improved Formability, and Ultra-High Strength
A1023/A1023M Standard Specification for Stranded Carbon Steel Wire Ropes for General Purposes
A1043/A1043M Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
A1045 Standard Specification for Flexible Poly (Vinyl Chloride) (PVC) Gaskets used in Connection of Vitreous China Plumbing Fixtures to Sanitary Drainage Systems
A1054 Standard Specification for Sintered Ceramic Ferrite Permanent Magnets
A1056 Standard Specification for Cast Iron Couplings Used for Joining Hubless Cast Iron Soil Pipe and Fittings
A1064/A1064M Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete
B1 Standard Specification for Hard-Drawn Copper Wire
B2 Standard Specification for Medium-Hard-Drawn Copper Wire
B3 Standard Specification for Soft or Annealed Copper Wire
B8 Standard Specification for Concentric-Lay-Stranded Copper Conductors, Hard, Medium-Hard, or Soft
B16/B16M Standard Specification for Free-Cutting Brass Rod, Bar and Shapes for Use in Screw Machines
B19 Standard Specification for Cartridge Brass Sheet, Strip, Plate, Bar, and Disks
B26/B26M Standard Specification for Aluminum-Alloy Sand Castings
B29 Standard Specification for Refined Lead
B30 Standard Specification for Copper Alloys in Ingot Form
B32 Standard Specification for Solder Metal
B33 Standard Specification for Tin-Coated Soft or Annealed Copper Wire for Electrical Purposes
B36/B36M Standard Specification for Brass Plate, Sheet, Strip, And Rolled Bar
B42 Standard Specification for Seamless Copper Pipe, Standard Sizes
B43 Standard Specification for Seamless Red Brass Pipe, Standard Sizes
B61 Standard Specification for Steam or Valve Bronze Castings
B62 Standard Specification for Composition Bronze or Ounce Metal Castings
B68/B68M Standard Specification for Seamless Copper Tube, Bright Annealed
B69 Standard Specification for Rolled Zinc
B75/B75M Standard Specification for Seamless Copper Tube
B85/B85M Standard Specification for Aluminum-Alloy Die Castings
B86 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloy Foundry and Die Castings
B88 Standard Specification for Seamless Copper Water Tube
B88M Standard Specification for Seamless Copper Water Tube (Metric)
B96/B96M Standard Specification for Copper-Silicon Alloy Plate, Sheet, Strip, and Rolled Bar for General Purposes and Pressure Vessels
B101 Standard Specification for Lead-Coated Copper Sheet and Strip for Building Construction
B105 Standard Specification for Hard-Drawn Copper Alloy Wires for Electric Conductors
B108/B108M Standard Specification for Aluminum-Alloy Permanent Mold Castings
B111/B111M Standard Specification for Copper and Copper-Alloy Seamless Condenser Tubes and Ferrule Stock
B117 Standard Practice for Operating Salt Spray (Fog) Apparatus
B122/B122M Standard Specification for Copper-Nickel-Tin Alloy, Copper-Nickel-Zinc Alloy (Nickel Silver), and Copper-Nickel Alloy Plate, Sheet, Strip, and Rolled Bar
B124/B124M Standard Specification for Copper and Copper Alloy Forging Rod, Bar, and Shapes
B127 Standard Specification for Nickel-Copper Alloy (UNS N04400) Plate, Sheet, and Strip
B134/B134M Standard Specification for Brass Wire
B135 Standard Specification for Seamless Brass Tube
B135M Standard Specification for Seamless Brass Tube [Metric]
B138/B138M Standard Specification for Manganese Bronze Rod, Bar, and Shapes
B148 Standard Specification for Aluminum-Bronze Sand Castings
B151/B151M Standard Specification for Copper-Nickel-Zinc Alloy (Nickel Silver) and Copper-Nickel Rod and Bar
B152/B152M Standard Specification for Copper Sheet, Strip, Plate, and Rolled Bar
B154 Standard Test Method for Mercurous Nitrate Test for Copper Alloys
B160 Standard Specification for Nickel Rod and Bar
B164 Standard Specification for Nickel-Copper Alloy Rod, Bar, and Wire
B165 Standard Specification for Nickel-Copper Alloy (UNS N04400)* Seamless Pipe and Tube
B169/B169M Standard Specification for Aluminum Bronze Sheet, Strip, and Rolled Bar
B172 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Bunch-Stranded Members, for Electrical Conductors
B173 Standard Specification for Rope-Lay-Stranded Copper Conductors Having Concentric-Stranded Members, for Electrical Conductors
B174 Standard Specification for Bunch-Stranded Copper Conductors for Electrical Conductors
B176 Standard Specification for Copper-Alloy Die Castings
B177/B177M Standard Guide for Engineering Chromium Electroplating
B179 Standard Specification for Aluminum Alloys in Ingot and Molten Forms for Castings from All Casting Processes
B187/B187M Standard Specification for Copper, Bus Bar, Rod, and Shapes and General Purpose Rod, Bar, and Shapes
B189 Standard Specification for Lead-Coated and Lead-Alloy-Coated Soft Copper Wire for Electrical Purposes
B194 Standard Specification for Copper-Beryllium Alloy Plate, Sheet, Strip, and Rolled Bar
B209 Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate
B209M Standard Specification for Aluminum and Aluminum-Alloy Sheet and Plate (Metric)
B210 Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes
B210M Standard Specification for Aluminum and Aluminum-Alloy Drawn Seamless Tubes [Metric]
B211 Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold Finished Bar, Rod, and Wire
B211M Standard Specification for Aluminum and Aluminum-Alloy Rolled or Cold-Finished Bar, Rod, and Wire (Metric)
B221M Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes (Metric)
B221 Standard Specification for Aluminum and Aluminum-Alloy Extruded Bars, Rods, Wire, Profiles, and Tubes
B227 Standard Specification for Hard-Drawn Copper-Clad Steel Wire
B228 Standard Specification for Concentric-Lay-Stranded Copper-Clad Steel Conductors
B230/B230M Standard Specification for Aluminum 1350-H19 Wire for Electrical Purposes
B231/B231M Standard Specification for Concentric-Lay-Stranded Aluminum 1350 Conductors
B232/B232M Standard Specification for Concentric-Lay-Stranded Aluminum Conductors, Coated-Steel Reinforced (ACSR)
B240 Standard Specification for Zinc and Zinc-Aluminum (ZA) Alloys in Ingot Form for Foundry and Die Castings
B241/B241M Standard Specification for Aluminum and Aluminum-Alloy Seamless Pipe and Seamless Extruded Tube
B244 Standard Test Method for Measurement of Thickness of Anodic Coatings on Aluminum and of Other Nonconductive Coatings on Nonmagnetic Basis Metals with Eddy-Current Instruments
B247 Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings
B247M Standard Specification for Aluminum and Aluminum-Alloy Die Forgings, Hand Forgings, and Rolled Ring Forgings [Metric]
B248 Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar
B248M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Plate, Sheet, Strip, and Rolled Bar (Metric)
B249/B249M Standard Specification for General Requirements for Wrought Copper and Copper-Alloy Rod, Bar, Shapes and Forgings
B251 Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube
B251M Standard Specification for General Requirements for Wrought Seamless Copper and Copper-Alloy Tube [Metric]
B265 Standard Specification for Titanium and Titanium Alloy Strip, Sheet, and Plate
B280 Standard Specification for Seamless Copper Tube for Air Conditioning and Refrigeration Field Service
B283/B283M Standard Specification for Copper and Copper-Alloy Die Forgings (Hot-Pressed)
B286 Standard Specification for Copper Conductors for Use in Hookup Wire for Electronic Equipment
B298 Standard Specification for Silver-Coated Soft or Annealed Copper Wire
B302 Standard Specification for Threadless Copper Pipe, Standard Sizes
B306 Standard Specification for Copper Drainage Tube (DWV)
B308/B308M Standard Specification for Aluminum-Alloy 6061-T6 Standard Structural Profiles
B316/B316M Standard Specification for Aluminum and Aluminum-Alloy Rivet and Cold-Heading Wire and Rods
B348 Standard Specification for Titanium and Titanium Alloy Bars and Billets
B355 Standard Specification for Nickel-Coated Soft or Annealed Copper Wire
B370 Standard Specification for Copper Sheet and Strip for Building Construction
B398/B398M Standard Specification for Aluminum-Alloy 6201-T81 Wire for Electrical Purposes
B399/B399M Standard Specification for Concentric-Lay-Stranded Aluminum-Alloy 6201-T81 Conductors
B400 Standard Specification for Compact Round Concentric-Lay-Stranded Aluminum 1350 Conductors
B416 Standard Specification for Concentric-Lay-Stranded Aluminum-Clad Steel Conductors
B418 Standard Specification for Cast and Wrought Galvanic Zinc Anodes
B429/B429M Standard Specification for Aluminum-Alloy Extruded Structural Pipe and Tube
B447 Standard Specification for Welded Copper Tube
B449 Standard Specification for Chromates on Aluminum
B452 Standard Specification for Copper-Clad Steel Wire for Electronic Application
B455 Standard Specification for Copper-Zinc-Lead Alloy (Leaded-Brass) Extruded Shapes
B456 Standard Specification for Electrodeposited Coatings of Copper Plus Nickel Plus Chromium and Nickel Plus Chromium
B496 Standard Specification for Compact Round Concentric-Lay-Stranded Copper Conductors
B501 Standard Specification for Silver-Coated, Copper-Clad Steel Wire for Electronic Application
B506 Specification for Copper-Clad Stainless Steel Sheet and Strip for Building Construction
B539 Standard Test Methods for Measuring Resistance of Electrical Connections (Static Contacts)
B555 Standard Guide for Measurement of Electrodeposited Metallic Coating Thicknesses by Dropping Test
B557 Standard Test Methods for Tension Testing Wrought and Cast Aluminum- and Magnesium-Alloy Products
B564 Standard Specification for Nickel Alloy Forgings
B566 Standard Specification for Copper-Clad Aluminum Wire
B568 Standard Test Method for Measurement of Coating Thickness by X-Ray Spectrometry
B571 Standard Practice for Qualitative Adhesion Testing of Metallic Coatings
B584 Standard Specification for Copper Alloy Sand Castings for General Applications
B587 Standard Specification for Welded Brass Tube
B609/B609M Standard Specification for Aluminum 1350 Round Wire, Annealed and Intermediate Tempers, for Electrical Purposes
B624 Standard Specification for High-Strength, High-Conductivity Copper-Alloy Wire for Electronic Application
B632/B632M Standard Specification for Aluminum-Alloy Rolled Tread Plate
B633 Standard Specification for Electrodeposited Coatings of Zinc on Iron and Steel
B660 Standard Practices for Packaging/Packing of Aluminum and Magnesium Products
B687 Standard Specification for Brass, Copper, and Chromium-Plated Pipe Nipples
B689 Standard Specification for Electroplated Engineering Nickel Coatings
B695 Standard Specification for Coatings of Zinc Mechanically Deposited on Iron and Steel
B738 Standard Specification for Fine-Wire Bunch-Stranded and Rope-Lay Bunch-Stranded Copper Conductors for Use as Electrical Conductors
B743 Standard Specification for Seamless Copper Tube in Coils
B745/B745M Standard Specification for Corrugated Aluminum Pipe for Sewers and Drains
B749 Standard Specification for Lead and Lead Alloy Strip, Sheet, and Plate Products
B766 Standard Specification for Electrodeposited Coatings of Cadmium
B787/B787M Standard Specification for 19 Wire Combination Unilay-Stranded Copper Conductors for Subsequent Insulation
B788/B788M Standard Practice for Installing Factory-Made Corrugated Aluminum Culverts and Storm Sewer Pipe
B800 Standard Specification for 8000 Series Aluminum Alloy Wire for Electrical Purposes - Annealed and Intermediate Tempers
B801 Standard Specification for Concentric-Lay-Stranded Conductors of 8000 Series Aluminum Alloy for Subsequent Covering or Insulation
B813 Standard Specification for Liquid and Paste Fluxes for Soldering of Copper and Copper Alloy Tube
B819 Standard Specification for Seamless Copper Tube for Medical Gas Systems
B824 Standard Specification for General Requirements for Copper Alloy Castings
B828 Standard Practice for Making Capillary Joints by Soldering of Copper and Copper Alloy Tube and Fittings
B835 Standard Specification for Compact Round Stranded Copper Conductors Using Single Input Wire Construction
B836 Standard Specification for Compact Round Stranded Aluminum Conductors Using Single Input Wire Construction
B837 Standard Specification for Seamless Copper Tube for Natural Gas and Liquefied Petroleum (LP) Gas Fuel Distribution Systems
B843 Standard Specification for Magnesium Alloy Anodes for Cathodic Protection
B858 Standard Test Method for Ammonia Vapor Test for Determining Susceptibility to Stress Corrosion Cracking in Copper Alloys
B869 Standard Specification for Copper-Clad Steel Electrical Conductor for CATV Drop Wire
B882 Specification for Pre-Patinated Copper for Architectural Applications
B901 Standard Specification for Compressed Round Stranded Aluminum Conductors Using Single Input Wire Construction
B902 Standard Specification for Compressed Round Stranded Copper Conductors, Hard, Medium-Hard, or Soft Using Single Input Wire Construction
C4 Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile
C5 Standard Specification for Quicklime for Structural Purposes
C10/C10M Standard Specification for Natural Cement
C11 Standard Terminology Relating to Gypsum and Related Building Materials and Systems
C12 Standard Practice for Installing Vitrified Clay Pipe Lines
C14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
C14M Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
C22/C22M Standard Specification for Gypsum
C25 Standard Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
C27 Standard Classification of Fireclay and High-Alumina Refractory Brick
C28/C28M Standard Specification for Gypsum Plasters
C29/C29M Standard Test Method for Bulk Density (Unit Weight) and Voids in Aggregate
C31/C31M Standard Practice for Making and Curing Concrete Test Specimens in the Field
C32 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)
C33/C33M Standard Specification for Concrete Aggregates
C34 Standard Specification for Structural Clay Load-Bearing Wall Tile
C35 Standard Specification for Inorganic Aggregates for Use in Gypsum Plaster
C39/C39M Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens
C40/C40M Standard Test Method for Organic Impurities in Fine Aggregates for Concrete
C42/C42M Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
C50 Standard Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
C51 Standard Terminology Relating to Lime and Limestone (as used by the Industry)
C55 Standard Specification for Concrete Building Brick
C56 Standard Specification for Structural Clay Nonloadbearing Tile
C59/C59M Standard Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
C61/C61M Standard Specification for Gypsum Keene's Cement
C62 Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
C67 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
C70 Standard Test Method for Surface Moisture in Fine Aggregate
C73 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)
C76 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
C76M Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
C78/C78M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)
C87/C87M Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar
C88 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate
C90 Standard Specification for Loadbearing Concrete Masonry Units
C91/C91M Standard Specification for Masonry Cement
C94/C94M Standard Specification for Ready-Mixed Concrete
C97/C97M Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C99/C99M Standard Test Method for Modulus of Rupture of Dimension Stone
C109/C109M Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens)
C110 Standard Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
C114 Standard Test Methods for Chemical Analysis of Hydraulic Cement
C115 Standard Test Method for Fineness of Portland Cement by the Turbidimeter
C117 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing
C118 Standard Specification for Concrete Pipe for Irrigation or Drainage
C118M Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)
C119 Standard Terminology Relating to Dimension Stone
C120/C120M Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
C121/C121M Standard Test Method for Water Absorption of Slate
C123/C123M Standard Test Method for Lightweight Particles in Aggregate
C125 Standard Terminology Relating to Concrete and Concrete Aggregates
C126 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
C127 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate
C128 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate
C129 Standard Specification for Nonloadbearing Concrete Masonry Units
C131 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C136 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates
C138/C138M Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete
C139 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
C140 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
C141/C141M Standard Specification for Hydrated Hydraulic Lime for Structural Purposes
C142/C142M Standard Test Method for Clay Lumps and Friable Particles in Aggregates
C143/C143M Standard Test Method for Slump of Hydraulic-Cement Concrete
C144 Standard Specification for Aggregate for Masonry Mortar
C150/C150M Standard Specification for Portland Cement
C151/C151M Standard Test Method for Autoclave Expansion of Hydraulic Cement
C156 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete
C157/C157M Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete
C159 Standard Specification for Vitrified Clay Filter Blocks
C163 Standard Practice for Mixing Thermal Insulating Cement Samples
C165 Standard Test Method for Measuring Compressive Properties of Thermal Insulations
C166 Standard Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
C167 Standard Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
C168 Standard Terminology Relating to Thermal Insulation
C170/C170M Standard Test Method for Compressive Strength of Dimension Stone
C171 Standard Specification for Sheet Materials for Curing Concrete
C172/C172M Standard Practice for Sampling Freshly Mixed Concrete
C173/C173M Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method
C174/C174M Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores
C177 Standard Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
C183 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
C185 Standard Test Method for Air Content of Hydraulic Cement Mortar
C186 Standard Test Method for Heat of Hydration of Hydraulic Cement
C187 Standard Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
C188 Standard Test Method for Density of Hydraulic Cement
C191 Standard Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
C192/C192M Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory
C195 Standard Specification for Mineral Fiber Thermal Insulating Cement
C196 Standard Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
C199 Standard Test Method for Pier Test for Refractory Mortars
C203 Standard Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
C204 Standard Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
C206 Standard Specification for Finishing Hydrated Lime
C207 Standard Specification for Hydrated Lime for Masonry Purposes
C208 Standard Specification for Cellulosic Fiber Insulating Board
C209 Standard Test Methods for Cellulosic Fiber Insulating Board
C212 Standard Specification for Structural Clay Facing Tile
C215 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens
C216 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
C217/C217M Standard Test Method for Weather Resistance of Slate
C219 Standard Terminology Relating to Hydraulic Cement
C220 Standard Specification for Flat Asbestos-Cement Sheets
C221 Standard Specification for Corrugated Asbestos-Cement Sheets
C222 Standard Specification for Asbestos-Cement Roofing Shingles
C223 Standard Specification for Asbestos-Cement Siding
C226 Standard Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
C227 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)
C230/C230M Standard Specification for Flow Table for Use in Tests of Hydraulic Cement
C231/C231M Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method
C232/C232M Standard Test Methods for Bleeding of Concrete
C233/C233M Standard Test Method for Air-Entraining Admixtures for Concrete
C240 Standard Test Methods of Testing Cellular Glass Insulation Block
C241/C241M Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C242 Standard Terminology of Ceramic Whitewares and Related Products
C260/C260M Standard Specification for Air-Entraining Admixtures for Concrete
C265 Standard Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
C266 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
C267 Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C270 Standard Specification for Mortar for Unit Masonry
C272/C272M Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
C273/C273M Standard Test Method for Shear Properties of Sandwich Core Materials
C279 Standard Specification for Chemical-Resistant Masonry Units
C287 Standard Specification for Chemical-Resistant Sulfur Mortar
C289 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)
C293/C293M Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)
C294 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates
C295/C295M Standard Guide for Petrographic Examination of Aggregates for Concrete
C296/C296M Standard Specification for Asbestos-Cement Pressure Pipe
C297/C297M Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C301 Standard Test Methods for Vitrified Clay Pipe
C302 Standard Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
C303 Standard Test Method for Dimensions and Density of Preformed Block and Board-Type Thermal Insulation
C305 Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
C307 Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C309 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete
C311 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete
C315 Standard Specification for Clay Flue Liners and Chimney Pots
C317/C317M Standard Specification for Gypsum Concrete
C318/C318M Standard Specification for Gypsum Formboard
C321 Standard Test Method for Bond Strength of Chemical-Resistant Mortars
C330/C330M Standard Specification for Lightweight Aggregates for Structural Concrete
C331/C331M Standard Specification for Lightweight Aggregates for Concrete Masonry Units
C332 Standard Specification for Lightweight Aggregates for Insulating Concrete
C335/C335M Standard Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
C341/C341M Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete
C348 Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars
C349 Standard Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
C356 Standard Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
C359 Standard Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
C361M Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
C361 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe
C365/C365M Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C367/C367M Standard Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
C373 Standard Test Method for Water Absorption, Bulk Density, Apparent Porosity, and Apparent Specific Gravity of Fired Whiteware Products
C384 Standard Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
C386 Standard Practice for Use of Chemical-Resistant Sulfur Mortar
C387/C387M Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar
C390 Standard Practice for Sampling and Acceptance of Thermal Insulation Lots
C393/C393M Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
C395 Standard Specification for Chemical-Resistant Resin Mortars
C397 Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C398 Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
C399 Standard Practice for Use of Chemical-Resistant Resin Mortars
C400 Standard Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
C401 Standard Classification of Alumina and Alumina-Silicate Castable Refractories
C403/C403M Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance
C404 Standard Specification for Aggregates for Masonry Grout
C406/C406M Standard Specification for Roofing Slate
C410 Standard Specification for Industrial Floor Brick
C411 Standard Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
C412 Standard Specification for Concrete Drain Tile
C412M Standard Specification for Concrete Drain Tile (Metric)
C413 Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C414 Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
C418 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting
C419 Standard Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
C421 Standard Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
C423 Standard Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
C425 Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings
C426 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units
C428/C428M Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe
C430 Standard Test Method for Fineness of Hydraulic Cement by the 45-μm (No. 325) Sieve
C441/C441M Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction
C443 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
C443M Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
C444M Standard Specification for Perforated Concrete Pipe (Metric)
C444 Standard Specification for Perforated Concrete Pipe
C447 Standard Practice for Estimating the Maximum Use Temperature of Thermal Insulations
C449 Standard Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
C450 Standard Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
C451 Standard Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
C452/C452M Standard Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
C457/C457M Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete
C458/C458M Standard Test Method for Organic Fiber Content of Asbestos-Cement Products
C459/C459M Standard Test Methods for Asbestos-Cement Flat Products
C461 Standard Test Methods for Mastics and Coatings Used With Thermal Insulation
C465 Standard Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
C466 Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
C469/C469M Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression
C470/C470M Standard Specification for Molds for Forming Concrete Test Cylinders Vertically
C471M Standard Test Methods for Chemical Analysis of Gypsum and Gypsum Products [Metric]
C472 Standard Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
C473 Standard Test Methods for Physical Testing of Gypsum Panel Products
C474 Standard Test Methods for Joint Treatment Materials for Gypsum Board Construction
C475/C475M Standard Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
C476 Standard Specification for Grout for Masonry
C478 Standard Specification for Precast Reinforced Concrete Manhole Sections
C478M Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)
C479 Standard Specification for Vitrified Clay Liner Plates
C481 Standard Test Method for Laboratory Aging of Sandwich Constructions
C482 Standard Test Method for Bond Strength of Ceramic Tile to Portland Cement Paste
C485 Standard Test Method for Measuring Warpage of Ceramic Tile
C488 Standard Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
C490/C490M Standard Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
C494/C494M Standard Specification for Chemical Admixtures for Concrete
C495/C495M Standard Test Method for Compressive Strength of Lightweight Insulating Concrete
C496/C496M Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
C497 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile
C497M Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile [Metric]
C499 Standard Test Method for Facial Dimensions and Thickness of Flat, Rectangular Ceramic Wall and Floor Tile
C500/C500M Standard Test Methods for Asbestos-Cement Pipe
C501 Standard Test Method for Relative Resistance to Wear of Unglazed Ceramic Tile by the Taber Abraser
C502 Standard Test Method for Wedging of Flat, Rectangular Ceramic Wall and Floor Tile
C503/C503M Standard Specification for Marble Dimension Stone
C505 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
C505M Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
C506 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
C506M Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
C507 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
C507M Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
C508/C508M Standard Specification for Asbestos-Cement Underdrain Pipe
C509 Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C510 Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C511 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
C512/C512M Standard Test Method for Creep of Concrete in Compression
C513 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength
C514 Standard Specification for Nails for the Application of Gypsum Board
C516 Standard Specification for Vermiculite Loose Fill Thermal Insulation
C518 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
C520 Standard Test Methods for Density of Granular Loose Fill Insulations
C522 Standard Test Method for Airflow Resistance of Acoustical Materials
C530 Standard Specification for Structural Clay Nonloadbearing Screen Tile
C531 Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C533 Standard Specification for Calcium Silicate Block and Pipe Thermal Insulation
C534/C534M Standard Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
C535 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine
C541/C541M Standard Specification for Linings for Asbestos-Cement Pipe
C542 Standard Specification for Lock-Strip Gaskets
C547 Standard Specification for Mineral Fiber Pipe Insulation
C549 Standard Specification for Perlite Loose Fill Insulation
C550 Standard Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
C551/C551M Standard Specification for Asbestos-Cement Fiberboard Insulating Panels
C552 Standard Specification for Cellular Glass Thermal Insulation
C553 Standard Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
C557 Standard Specification for Adhesives for Fastening Gypsum Wallboard to Wood Framing
C563 Standard Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
C564 Standard Specification for Rubber Gaskets for Cast Iron Soil Pipe and Fittings
C566 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying
C567/C567M Standard Test Method for Determining Density of Structural Lightweight Concrete
C568/C568M Standard Specification for Limestone Dimension Stone
C578 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
C579 Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C580 Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C581 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C585 Standard Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
C586 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)
C587 Standard Specification for Gypsum Veneer Plaster
C591 Standard Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
C592 Standard Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
C593 Standard Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
C595/C595M Standard Specification for Blended Hydraulic Cements
C596 Standard Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
C597 Standard Test Method for Pulse Velocity Through Concrete
C602 Standard Specification for Agricultural Liming Materials
C603 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C610 Standard Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
C612 Standard Specification for Mineral Fiber Block and Board Thermal Insulation
C615/C615M Standard Specification for Granite Dimension Stone
C616/C616M Standard Specification for Quartz-Based Dimension Stone
C617/C617M Standard Practice for Capping Cylindrical Concrete Specimens
C618 Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete
C627 Standard Test Method for Evaluating Ceramic Floor Tile Installation Systems Using the Robinson-Type Floor Tester
C629/C629M Standard Specification for Slate Dimension Stone
C631 Standard Specification for Bonding Compounds for Interior Gypsum Plastering
C634 Standard Terminology Relating to Building and Environmental Acoustics
C635/C635M Standard Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
C636/C636M Standard Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
C637 Standard Specification for Aggregates for Radiation-Shielding Concrete
C638 Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete
C639 Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C641 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates
C642 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete
C645 Standard Specification for Nonstructural Steel Framing Members
C647 Standard Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
C648 Standard Test Method for Breaking Strength of Ceramic Tile
C650 Standard Test Method for Resistance of Ceramic Tile to Chemical Substances
C652 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
C653 Standard Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
C654 Standard Specification for Porous Concrete Pipe
C654M Standard Specification for Porous Concrete Pipe (Metric)
C655 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
C655M Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
C656 Standard Specification for Structural Insulating Board, Calcium Silicate
C658 Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile
C659 Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
C661 Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C663 Standard Specification for Asbestos-Cement Storm Drain Pipe
C665 Standard Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
C666/C666M Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing
C667 Standard Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
C668 Standard Specification for Asbestos-Cement Transmission Pipe
C670 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials
C672/C672M Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals
C679 Standard Test Method for Tack-Free Time of Elastomeric Sealants
C680 Standard Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
C681 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C685/C685M Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing
C686 Standard Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
C687 Standard Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
C688 Standard Specification for Functional Additions for Use in Hydraulic Cements
C692 Standard Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
C695 Standard Test Method for Compressive Strength of Carbon and Graphite
C700 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
C702/C702M Standard Practice for Reducing Samples of Aggregate to Testing Size
C706 Standard Specification for Limestone for Animal Feed Use
C711 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C712 Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C716 Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C717 Standard Terminology of Building Seals and Sealants
C719 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C723 Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile
C725 Standard Specification for Semidense Mineral Fiber Siding
C726 Standard Specification for Mineral Wool Roof Insulation Board
C727 Standard Practice for Installation and Use of Reflective Insulation in Building Constructions
C728 Standard Specification for Perlite Thermal Insulation Board
C731 Standard Test Method for Extrudability, After Package Aging, of Latex Sealants
C732 Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C734 Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C736 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants
C737 Standard Specification for Limestone for Dusting of Coal Mines
C739 Standard Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
C740/C740M Standard Practice for Evacuated Reflective Insulation In Cryogenic Service
C744 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units
C746 Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
C754 Standard Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
C755 Standard Practice for Selection of Water Vapor Retarders for Thermal Insulation
C764 Standard Specification for Mineral Fiber Loose-Fill Thermal Insulation
C765 Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C771 Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes
C772 Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C778 Standard Specification for Standard Sand
C779/C779M Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces
C780 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
C782 Standard Test Method for Softness of Preformed Tape Sealants
C786/C786M Standard Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-μm (No. 50), 150-μm (No. 100), and 75-μm (No. 200) Sieves by Wet Methods
C792 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C793 Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C794 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C795 Standard Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
C796/C796M Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam
C800 Standard Specification for Glass Fiber Blanket Insulation (Aircraft Type)
C802 Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials
C803/C803M Standard Test Method for Penetration Resistance of Hardened Concrete
C805/C805M Standard Test Method for Rebound Number of Hardened Concrete
C806 Standard Test Method for Restrained Expansion of Expansive Cement Mortar
C807 Standard Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
C811 Standard Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
C821 Standard Specification for Lime for Use with Pozzolans
C822 Standard Terminology Relating to Concrete Pipe and Related Products
C823/C823M Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
C825 Standard Specification for Precast Concrete Barriers
C827/C827M Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures
C828 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
C834 Standard Specification for Latex Sealants
C835 Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C
C836/C836M Standard Specification for High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane for Use with Separate Wearing Course
C840 Standard Specification for Application and Finishing of Gypsum Board
C841 Standard Specification for Installation of Interior Lathing and Furring
C842 Standard Specification for Application of Interior Gypsum Plaster
C843 Standard Specification for Application of Gypsum Veneer Plaster
C844 Standard Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
C845 Standard Specification for Expansive Hydraulic Cement
C846 Standard Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
C847 Standard Specification for Metal Lath
C856 Standard Practice for Petrographic Examination of Hardened Concrete
C857 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
C858 Standard Specification for Underground Precast Concrete Utility Structures
C864 Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C868 Standard Test Method for Chemical Resistance of Protective Linings
C869/C869M Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete
C870 Standard Practice for Conditioning of Thermal Insulating Materials
C871 Standard Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
C873/C873M Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds
C875 Standard Specification for Asbestos-Cement Conduit
C877 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
C877M Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
C878/C878M Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete
C879 Standard Test Methods for Release Papers Used With Preformed Tape Sealants
C880/C880M Standard Test Method for Flexural Strength of Dimension Stone
C881/C881M Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete
C882/C882M Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear
C884/C884M Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay
C887 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
C890 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
C891 Standard Practice for Installation of Underground Precast Concrete Utility Structures
C892 Standard Specification for High-Temperature Fiber Blanket Thermal Insulation
C896 Standard Terminology Relating to Clay Products
C897 Standard Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
C898/C898M Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Separate Wearing Course
C900 Standard Test Method for Pullout Strength of Hardened Concrete
C901 Standard Specification for Prefabricated Masonry Panels
C902 Standard Specification for Pedestrian and Light Traffic Paving Brick
C904 Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials
C905 Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C907 Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C908 Standard Test Method for Yield Strength of Preformed Tape Sealants
C910 Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C911 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
C913 Standard Specification for Precast Concrete Water and Wastewater Structures
C915 Standard Specification for Precast Reinforced Concrete Crib Wall Members
C916 Standard Specification for Adhesives for Duct Thermal Insulation
C917 Standard Test Method for Evaluation of Cement Strength Uniformity From a Single Source
C918/C918M Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength
C919 Standard Practice for Use of Sealants in Acoustical Applications
C920 Standard Specification for Elastomeric Joint Sealants
C921 Standard Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
C923 Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
C923M Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
C924 Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
C924M Standard Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
C926 Standard Specification for Application of Portland Cement-Based Plaster
C928/C928M Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs
C929 Standard Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
C930 Standard Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
C932 Standard Specification for Surface-Applied Bonding Compounds for Exterior Plastering
C933 Standard Specification for Welded Wire Lath
C936/C936M Standard Specification for Solid Concrete Interlocking Paving Units
C937 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete
C938 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete
C939 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)
C940 Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory
C941 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory
C942 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C943 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory
C944/C944M Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method
C945 Standard Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C946 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls
C947 Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
C948 Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
C950/C950M Standard Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
C952 Standard Test Method for Bond Strength of Mortar to Masonry Units
C953 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory
C954 Standard Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
C955 Standard Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
C956 Standard Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
C957/C957M Standard Specification for High-Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane With Integral Wearing Surface
C961 Standard Test Method for Lap Shear Strength of Sealants
C963 Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C964 Standard Guide for Lock-Strip Gasket Glazing
C966 Standard Guide for Installing Asbestos-Cement Nonpressure Pipe
C969 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C969M Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C972 Standard Test Method for Compression-Recovery of Tape Sealant
C977 Standard Specification for Quicklime and Hydrated Lime for Soil Stabilization
C979/C979M Standard Specification for Pigments for Integrally Colored Concrete
C980 Standard Specification for Industrial Chimney Lining Brick
C981 Standard Guide for Design of Built-Up Bituminous Membrane Waterproofing Systems for Building Decks
C985 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
C985M Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
C989/C989M Standard Specification for Slag Cement for Use in Concrete and Mortars
C990 Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
C990M Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
C991 Standard Specification for Flexible Fibrous Glass Insulation for Metal Buildings
C1002 Standard Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
C1005 Standard Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
C1006 Standard Test Method for Splitting Tensile Strength of Masonry Units
C1007 Standard Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
C1012/C1012M Standard Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
C1014 Standard Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
C1015 Standard Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
C1016 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1017/C1017M Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete
C1019 Standard Test Method for Sampling and Testing Grout
C1021 Standard Practice for Laboratories Engaged in Testing of Building Sealants
C1028 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
C1029 Standard Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
C1032 Standard Specification for Woven Wire Plaster Base
C1036 Standard Specification for Flat Glass
C1037 Standard Practice for Inspection of Underground Precast Concrete Utility Structures
C1038/C1038M Standard Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
C1040/C1040M Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods
C1041 Standard Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
C1043 Standard Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
C1044 Standard Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
C1045 Standard Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
C1046 Standard Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
C1047 Standard Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
C1048 Standard Specification for Heat-Strengthened and Fully Tempered Flat Glass
C1053 Standard Specification for Borosilicate Glass Pipe and Fittings for Drain, Waste, and Vent (DWV) Applications
C1055 Standard Guide for Heated System Surface Conditions That Produce Contact Burn Injuries
C1057 Standard Practice for Determination of Skin Contact Temperature from Heated Surfaces Using A Mathematical Model and Thermesthesiometer
C1058/C1058M Standard Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
C1059/C1059M Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete
C1060 Standard Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
C1063 Standard Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
C1064/C1064M Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete
C1067 Standard Practice for Conducting A Ruggedness or Screening Program for Test Methods for Construction Materials
C1071 Standard Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
C1072 Standard Test Methods for Measurement of Masonry Flexural Bond Strength
C1073 Standard Test Method for Hydraulic Activity of Ground Slag by Reaction with Alkali
C1074 Standard Practice for Estimating Concrete Strength by the Maturity Method
C1077 Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation
C1080 Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
C1081 Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
C1082 Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
C1083 Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1084 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete
C1086 Standard Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
C1087 Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1088 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale
C1089 Standard Specification for Spun Cast Prestressed Concrete Poles
C1090 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout
C1091 Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
C1093 Standard Practice for Accreditation of Testing Agencies for Masonry
C1096/C1096M Standard Test Method for Determination of Wood Fiber in Asbestos Cement
C1097 Standard Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
C1101/C1101M Standard Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
C1103 Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
C1103M Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
C1104/C1104M Standard Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
C1105 Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction
C1106 Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
C1107/C1107M Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)
C1114 Standard Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
C1115 Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1116/C1116M Standard Specification for Fiber-Reinforced Concrete
C1119/C1119M Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes
C1120/C1120M Standard Test Method for Wash Test of Asbestos
C1121/C1121M Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
C1122/C1122M Standard Test Method for Wet Volume of Asbestos
C1123/C1123M Standard Test Method for Compressibility and Recovery of Asbestos
C1124/C1124M Standard Test Method for Kerosene Retention of Asbestos
C1125 Standard Test Method for Penetration Index of Asbestos
C1126 Standard Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
C1127 Standard Guide for Use of High Solids Content, Cold Liquid-Applied Elastomeric Waterproofing Membrane with an Integral Wearing Surface
C1129 Standard Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
C1130 Standard Practice for Calibrating Thin Heat Flux Transducers
C1131 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
C1134 Standard Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
C1135 Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1136 Standard Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
C1138M Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)
C1139 Standard Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
C1140/C1140M Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels
C1141/C1141M Standard Specification for Admixtures for Shotcrete
C1142 Standard Specification for Extended Life Mortar for Unit Masonry
C1146 Standard Guide for Prefabricated Panel and H–bar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
C1147 Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
C1148 Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar
C1149 Standard Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
C1152/C1152M Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete
C1153 Standard Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
C1154 Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products
C1155 Standard Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
C1157/C1157M Standard Performance Specification for Hydraulic Cement
C1159 Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
C1160 Standard Specification for Chemical-Resistant Carbon Brick
C1162/C1162M Standard Test Method for Loose Density of Asbestos
C1164 Standard Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
C1166 Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1167 Standard Specification for Clay Roof Tiles
C1170/C1170M Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table
C1172 Standard Specification for Laminated Architectural Flat Glass
C1173 Standard Specification for Flexible Transition Couplings for Underground Piping Systems
C1176/C1176M Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table
C1177/C1177M Standard Specification for Glass Mat Gypsum Substrate for Use as Sheathing
C1178/C1178M Standard Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
C1180 Standard Terminology of Mortar and Grout for Unit Masonry
C1181 Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
C1183 Standard Test Method for Extrusion Rate of Elastomeric Sealants
C1184 Standard Specification for Structural Silicone Sealants
C1185 Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
C1186 Standard Specification for Flat Fiber-Cement Sheets
C1193 Standard Guide for Use of Joint Sealants
C1194 Standard Test Method for Compressive Strength of Architectural Cast Stone
C1195 Standard Test Method for Absorption of Architectural Cast Stone
C1196 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
C1197 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
C1199 Standard Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
C1201/C1201M Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1202 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration
C1208/C1208M Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
C1214 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
C1214M Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
C1216 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1218/C1218M Standard Test Method for Water-Soluble Chloride in Mortar and Concrete
C1222 Standard Practice for Evaluation of Laboratories Testing Hydraulic Cement
C1224 Standard Specification for Reflective Insulation for Building Applications
C1225 Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
C1227 Standard Specification for Precast Concrete Septic Tanks
C1228 Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
C1229 Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
C1230 Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
C1231/C1231M Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders
C1232 Standard Terminology of Masonry
C1240 Standard Specification for Silica Fume Used in Cementitious Mixtures
C1241 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
C1244 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1244M Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
C1245/C1245M Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)
C1246 Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248 Standard Test Method for Staining of Porous Substrate by Joint Sealants
C1249 Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1250 Standard Test Method for Nonvolatile Content of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1252 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)
C1253 Standard Test Method for Determining the Outgassing Potential of Sealant Backing
C1257 Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1258 Standard Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
C1260 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)
C1261 Standard Specification for Firebox Brick for Residential Fireplaces
C1262 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
C1263 Standard Test Method for Thermal Integrity of Flexible Water Vapor Retarders
C1264 Standard Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
C1265 Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266 Standard Test Method for Flow Characteristics of Preformed Tape Sealants
C1271 Standard Test Method for X-ray Spectrometric Analysis of Lime and Limestone
C1272 Standard Specification for Heavy Vehicular Paving Brick
C1277 Standard Specification for Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1278/C1278M Standard Specification for Fiber-Reinforced Gypsum Panel
C1280 Standard Specification for Application of Gypsum Sheathing
C1281 Standard Specification for Preformed Tape Sealants for Glazing Applications
C1283 Standard Practice for Installing Clay Flue Lining
C1288 Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
C1289 Standard Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
C1290 Standard Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
C1293 Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction
C1294 Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1298 Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys
C1301 Standard Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
C1302 Standard Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
C1303/C1303M Standard Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
C1304 Standard Test Method for Assessing the Odor Emission of Thermal Insulation Materials
C1305 Standard Test Method for Crack Bridging Ability of Liquid-Applied Waterproofing Membrane
C1306 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
C1311 Standard Specification for Solvent Release Sealants
C1312 Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
C1313/C1313M Standard Specification for Sheet Radiant Barriers for Building Construction Applications
C1314 Standard Test Method for Compressive Strength of Masonry Prisms
C1315 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete
C1318 Standard Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
C1319 Standard Specification for Concrete Grid Paving Units
C1320 Standard Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
C1321 Standard Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
C1324 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar
C1325 Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
C1328/C1328M Standard Specification for Plastic (Stucco) Cement
C1329/C1329M Standard Specification for Mortar Cement
C1330 Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants
C1335 Standard Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
C1338 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
C1339 Standard Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
C1340/C1340M Standard Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
C1349 Standard Specification for Architectural Flat Glass Clad Polycarbonate
C1352/C1352M Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser
C1354/C1354M Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1355/C1355M Standard Specification for Glass Fiber Reinforced Gypsum Composites
C1356 Standard Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
C1357 Standard Test Methods for Evaluating Masonry Bond Strength
C1362 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete
C1363 Standard Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
C1364 Standard Specification for Architectural Cast Stone
C1365 Standard Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
C1367 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1369 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1370 Standard Test Method for Determining the Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
C1371 Standard Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
C1372 Standard Specification for Dry-Cast Segmental Retaining Wall Units
C1373/C1373M Standard Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
C1374 Standard Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
C1375 Standard Guide for Substrates Used in Testing Building Seals and Sealants
C1376 Standard Specification for Pyrolytic and Vacuum Deposition Coatings on Flat Glass
C1381/C1381M Standard Specification for Molded Glass Fiber Reinforced Gypsum Parts
C1382 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1383 Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method
C1384 Standard Specification for Admixtures for Masonry Mortars
C1385/C1385M Standard Practice for Sampling Materials for Shotcrete
C1386 Standard Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
C1392 Standard Guide for Evaluating Failure of Structural Sealant Glazing
C1393 Standard Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
C1394 Standard Guide for In-Situ Structural Silicone Glazing Evaluation
C1396/C1396M Standard Specification for Gypsum Board
C1397 Standard Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
C1399/C1399M Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete
C1400 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls
C1401 Standard Guide for Structural Sealant Glazing
C1403 Standard Test Method for Rate of Water Absorption of Masonry Mortars
C1405 Standard Specification for Glazed Brick (Single Fired, Brick Units)
C1409 Standard Guide for Measuring and Estimating Quantities of Insulated Piping and Components
C1410 Standard Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
C1417 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
C1417M Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
C1422/C1422M Standard Specification for Chemically Strengthened Flat Glass
C1423 Standard Guide for Selecting Jacketing Materials for Thermal Insulation
C1427 Standard Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
C1433 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1433M Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
C1435/C1435M Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer
C1436 Standard Specification for Materials for Shotcrete
C1437 Standard Test Method for Flow of Hydraulic Cement Mortar
C1438 Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar
C1439 Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete
C1440 Standard Specification for Thermoplastic Elastomeric (TPE) Gasket Materials for Drain, Waste, and Vent (DWV), Sewer, Sanitary and Storm Plumbing Systems
C1442 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1447/C1447M Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
C1448/C1448M Standard Specification for Non-Asbestos Fiber-Cement Conduit
C1449/C1449M Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
C1450/C1450M Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
C1451 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source
C1452 Standard Specification for Reinforced Autoclaved Aerated Concrete Elements
C1459 Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
C1460 Standard Specification for Shielded Transition Couplings for Use With Dissimilar DWV Pipe and Fittings Above Ground
C1461 Standard Specification for Mechanical Couplings Using Thermoplastic Elastomeric (TPE) Gaskets for Joining Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems for Above and Below Ground Use
C1464 Standard Specification for Bent Glass
C1467/C1467M Standard Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
C1471 Standard Guide for the Use of High Solids Content Cold Liquid-Applied Elastomeric Waterproofing Membrane on Vertical Surfaces
C1472 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1478 Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
C1478M Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)
C1479 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
C1479M Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
C1480/C1480M Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application
C1481 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1482 Standard Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
C1483/C1483M Standard Specification for Exterior Solar Radiation Control Coatings on Buildings
C1484 Standard Specification for Vacuum Insulation Panels
C1485 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
C1486 Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
C1487 Standard Guide for Remedying Structural Silicone Glazing
C1488 Standard Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
C1489 Standard Specification for Lime Putty for Structural Purposes
C1491 Standard Specification for Concrete Roof Pavers
C1492 Standard Specification for Concrete Roof Tile
C1496 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
C1497 Standard Specification for Cellulosic Fiber Stabilized Thermal Insulation
C1498 Standard Test Method for Hygroscopic Sorption Isotherms of Building Materials
C1501 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1503 Standard Specification for Silvered Flat Glass Mirror
C1504 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
C1504M Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
C1506 Standard Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
C1511 Standard Test Method for Determining the Water Retention (Repellency) Characteristics of Glass Fiber Insulation (Aircraft Type)
C1512 Standard Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
C1513 Standard Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
C1515 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
C1516 Standard Practice for Application of Direct-Applied Exterior Finish Systems
C1518 Standard Specification for Precured Elastomeric Silicone Joint Sealants
C1519 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520 Standard Guide for Paintability of Latex Sealants
C1521 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1522 Standard Test Method for Extensibility After Heat Aging of Cold Liquid-Applied Elastomeric Waterproofing Membranes
C1523 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1524 Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)
C1526 Standard Specification for Serpentine Dimension Stone
C1527/C1527M Standard Specification for Travertine Dimension Stone
C1528 Standard Guide for Selection of Dimension Stone
C1529 Standard Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
C1530/C1530M Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
C1531 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
C1532 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
C1534 Standard Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
C1535 Standard Practice for Application of Exterior Insulation and Finish Systems Class PI
C1536 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants
C1540 Standard Specification for Heavy Duty Shielded Couplings Joining Hubless Cast Iron Soil Pipe and Fittings
C1541 Standard Specification for Shielded Transition Couplings Using Flexible Poly Vinyl Chloride (PVC) Gaskets to Connect Dissimilar DWV Pipe and Fittings
C1542/C1542M Standard Test Method for Measuring Length of Concrete Cores
C1543 Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding
C1546 Standard Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
C1549 Standard Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
C1550 Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)
C1552 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
C1556 Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion
C1558 Standard Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
C1559 Standard Test Method for Determining Wicking of Glass Fiber Blanket Insulation (Aircraft Type)
C1560 Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
C1563 Standard Test Method for Gaskets for Use in Connection with Hub and Spigot Cast Iron Soil Pipe and Fittings for Sanitary Drain, Waste, Vent, and Storm Piping Applications
C1564 Standard Guide for Use of Silicone Sealants for Protective Glazing Systems
C1565 Standard Test Method for Determination of Pack-Set Index of Portland Cement
C1567 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)
C1568 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
C1569 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
C1570 Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)
C1574 Standard Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
C1577 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
C1579 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)
C1580 Standard Test Method for Water-Soluble Sulfate in Soil
C1581/C1581M Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage
C1582/C1582M Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete
C1583/C1583M Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)
C1585 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes
C1586 Standard Guide for Quality Assurance of Mortars
C1587 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
C1589 Standard Practice for Outdoor Weathering of Construction Seals and Sealants
C1591 Standard Test Method for Determination of the Modulus of Elasticity of AAC
C1594 Standard Specification for Polyimide Rigid Cellular Thermal Insulation
C1597M Standard Specification for Gypsum Wallboard (Hard Metric Sizes)
C1600/C1600M Standard Specification for Rapid Hardening Hydraulic Cement
C1601 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
C1602/C1602M Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete
C1603 Standard Test Method for Measurement of Solids in Water
C1604/C1604M Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete
C1608 Standard Test Method for Chemical Shrinkage of Hydraulic Cement Paste
C1609/C1609M Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)
C1610/C1610M Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique
C1611/C1611M Standard Test Method for Slump Flow of Self-Consolidating Concrete
C1613 Standard Specification for Precast Concrete Grease Interceptor Tanks
C1616 Standard Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
C1617 Standard Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
C1618 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
C1618M Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
C1619 Standard Specification for Elastomeric Seals for Joining Concrete Structures
C1620 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1621/C1621M Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring
C1622/C1622M Standard Specification for Cold-Weather Admixture Systems
C1623 Standard Specification for Manufactured Concrete Masonry Lintels
C1628 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
C1629/C1629M Standard Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
C1630 Standard Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
C1634 Standard Specification for Concrete Facing Brick
C1635 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1639 Standard Specification for Fabrication of Cellular Glass Pipe and Tubing Insulation
C1642 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
C1644 Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
C1645/C1645M Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
C1646/C1646M Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete
C1658/C1658M Standard Specification for Glass Mat Gypsum Panels
C1660 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
C1666/C1666M Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
C1667 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
C1668 Standard Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
C1675 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
C1676 Standard Specification for Microporous Thermal Insulation
C1677 Standard Specification for Joints for Concrete Box, Using Rubber Gaskets
C1679 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry
C1681 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
C1685 Standard Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
C1686 Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
C1688/C1688M Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete
C1691 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
C1692 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
C1693 Standard Specification for Autoclaved Aerated Concrete (AAC)
C1694 Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
C1695 Standard Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
C1696 Standard Guide for Industrial Thermal Insulation Systems
C1697 Standard Specification for Blended Supplementary Cementitious Materials
C1698 Standard Test Method for Autogenous Strain of Cement Paste and Mortar
C1699 Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
C1701/C1701M Standard Test Method for Infiltration Rate of In Place Pervious Concrete
C1702 Standard Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
C1704/C1704M Standard Test Method for Sampling and Testing Structural Cementitious Panels
C1705/C1705M Standard Specification for Structural Cementitious Panels
C1707 Standard Specification for Pozzolanic Hydraulic Lime for Structural Purposes
C1708 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements
C1709 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete
C1710 Standard Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
C1712 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test
C1713 Standard Specification for Mortars for the Repair of Historic Masonry
C1714/C1714M Standard Specification for Preblended Dry Mortar Mix for Unit Masonry
C1715 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
C1716/C1716M Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms
C1717 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels
C1719 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill
C1721 Standard Guide for Petrographic Examination of Dimension Stone
C1722 Standard Guide for Repair and Restoration of Dimension Stone
C1723 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy
C1728 Standard Specification for Flexible Aerogel Insulation
C1729 Standard Specification for Aluminum Jacketing for Insulation
C1735 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation
C1736 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device
C1737 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
C1738 Standard Practice for High-Shear Mixing of Hydraulic Cement Paste
C1740 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method
C1741 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout
C1743 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Residential Building Construction
C1744 Standard Practice for Installation and Use of Radiant Barrier Systems (RBS) in Commercial/Industrial Building Construction
C1745/C1745M Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices
C1747/C1747M Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion
C1749 Standard Guide for Measurement of the Rheological Properties of Hydraulic Cementious Paste Using a Rotational Rheometer
C1756 Standard Guide for Comparing Sealant Behavior to Reference Photographs
C1758/C1758M Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
C1760 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete
D4 Standard Test Method for Bitumen Content
D5 Standard Test Method for Penetration of Bituminous Materials
D6/D6M Standard Test Method for Loss on Heating of Oil and Asphaltic Compounds
D8 Standard Terminology Relating to Materials for Roads and Pavements
D9 Standard Terminology Relating to Wood and Wood-Based Products
D16 Standard Terminology for Paint, Related Coatings, Materials, and Applications
D20 Standard Test Method for Distillation of Road Tars
D25 Standard Specification for Round Timber Piles
D36/D36M Standard Test Method for Softening Point of Bitumen (Ring-and-Ball Apparatus)
D41/D41M Standard Specification for Asphalt Primer Used in Roofing, Dampproofing, and Waterproofing
D43 Standard Specification for Coal Tar Primer Used in Roofing, Dampproofing, and Waterproofing
D56 Standard Test Method for Flash Point by Tag Closed Cup Tester
D61 Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)
D70 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
D71 Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)
D75/D75M Standard Practice for Sampling Aggregates
D76/D76M Standard Specification for Tensile Testing Machines for Textiles
D86 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure
D87 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
D88 Standard Test Method for Saybolt Viscosity
D92 Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester
D93 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester
D97 Standard Test Method for Pour Point of Petroleum Products
D98 Standard Specification for Calcium Chloride
D113 Standard Test Method for Ductility of Bituminous Materials
D117 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Oils of Petroleum Origin
D130 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test
D139 Standard Test Method for Float Test for Bituminous Materials
D140/D140M Standard Practice for Sampling Bituminous Materials
D143 Standard Test Methods for Small Clear Specimens of Timber
D146 Standard Test Methods for Sampling and Testing Bitumen-Saturated Felts and Woven Fabrics for Roofing and Waterproofing
D149 Standard Test Method for Dielectric Breakdown Voltage and Dielectric Strength of Solid Electrical Insulating Materials at Commercial Power Frequencies
D156 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)
D173/D173M Standard Specification for Bitumen-Saturated Cotton Fabrics Used in Roofing and Waterproofing
D187 Standard Test Method for Burning Quality of Kerosine
D198 Standard Test Methods of Static Tests of Lumber in Structural Sizes
D204 Standard Test Methods for Sewing Threads
D217 Standard Test Methods for Cone Penetration of Lubricating Grease
D225 Standard Specification for Asphalt Shingles (Organic Felt) Surfaced With Mineral Granules
D226/D226M Standard Specification for Asphalt-Saturated Organic Felt Used in Roofing and Waterproofing
D227/D227M Standard Specification for Coal-Tar-Saturated Organic Felt Used in Roofing and Waterproofing
D228/D228M Standard Test Methods for Sampling, Testing, and Analysis of Asphalt Roll Roofing, Cap Sheets, and Shingles Used in Roofing and Waterproofing
D242/D242M Standard Specification for Mineral Filler For Bituminous Paving Mixtures
D243 Standard Test Method for Residue of Specified Penetration
D244 Standard Test Methods and Practices for Emulsified Asphalts
D245 Standard Practice for Establishing Structural Grades and Related Allowable Properties for Visually Graded Lumber
D256 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
D257 Standard Test Methods for DC Resistance or Conductance of Insulating Materials
D297 Standard Test Methods for Rubber Products-Chemical Analysis
D299/D299M Standard Specification for Asbestos Yarns
D312 Standard Specification for Asphalt Used in Roofing
D315/D315M Standard Specification for Woven Asbestos Tape
D323 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)
D345 Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
D348 Standard Test Methods for Rigid Tubes Used for Electrical Insulation
D350 Standard Test Methods for Flexible Treated Sleeving Used for Electrical Insulation
D374 Standard Test Methods for Thickness of Solid Electrical Insulation
D375/D375M Standard Specification for Asbestos Roving
D380 Standard Test Methods for Rubber Hose
D395 Standard Test Methods for Rubber Property—Compression Set
D396 Standard Specification for Fuel Oils
D402 Standard Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
D412 Standard Test Methods for Vulcanized Rubber and Thermoplastic Elastomers—Tension
D413 Standard Test Methods for Rubber Property—Adhesion to Flexible Substrate
D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D421 Standard Practice for Dry Preparation of Soil Samples for Particle-Size Analysis and Determination of Soil Constants
D422 Standard Test Method for Particle-Size Analysis of Soils
D422 Standard Test Method for Particle-Size Analysis of Soils
D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils
D425 Standard Test Method for Centrifuge Moisture Equivalent of Soils
D429 Standard Test Methods for Rubber Property—Adhesion to Rigid Substrates
D445 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)
D448 Standard Classification for Sizes of Aggregate for Road and Bridge Construction
D449 Standard Specification for Asphalt Used in Dampproofing and Waterproofing
D450 Standard Specification for Coal-Tar Pitch Used in Roofing, Dampproofing, and Waterproofing
D451 Standard Test Method for Sieve Analysis of Granular Mineral Surfacing For Asphalt Roofing Products
D452 Standard Test Method for Sieve Analysis of Surfacing for Asphalt Roofing Products
D470 Standard Test Methods for Crosslinked Insulations and Jackets for Wire and Cable
D471 Standard Test Method for Rubber Property—Effect of Liquids
D490 Standard Specification for Road Tar
D495 Standard Test Method for High-Voltage, Low-Current, Dry Arc Resistance of Solid Electrical Insulation
D517 Standard Specification for Asphalt Plank
D522 Standard Test Methods for Mandrel Bend Test of Attached Organic Coatings
D523 Standard Test Method for Specular Gloss
D529 Standard Practice for Enclosed Carbon-Arc Exposures of Bituminous Materials
D543 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents
D545 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
D546 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
D558 Standard Test Methods for Moisture-Density (Unit Weight) Relations of Soil-Cement Mixtures
D559 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
D559 Standard Test Methods for Wetting and Drying Compacted Soil-Cement Mixtures
D560 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
D560 Standard Test Methods for Freezing and Thawing Compacted Soil-Cement Mixtures
D570 Standard Test Method for Water Absorption of Plastics
D572 Standard Test Method for Rubber-Deterioration by Heat and Oxygen
D573 Standard Test Method for Rubber—Deterioration in an Air Oven
D578/D578M Standard Specification for Glass Fiber Strands
D596 Standard Guide for Reporting Results of Analysis of Water
D610 Standard Practice for Evaluating Degree of Rusting on Painted Steel Surfaces
D611 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents
D618 Standard Practice for Conditioning Plastics for Testing
D619 Standard Test Methods for Vulcanized Fibre Used for Electrical Insulation
D622 Standard Test Methods for Rubber Hose for Automotive Air and Vacuum Brake System
D624 Standard Test Method for Tear Strength of Conventional Vulcanized Rubber and Thermoplastic Elastomers
D628/D628M Standard Specification for Asbestos Tubular Sleeving
D632 Standard Specification for Sodium Chloride
D633 Standard Volume Correction Table for Road Tar
D635 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
D638 Standard Test Method for Tensile Properties of Plastics
D648 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids
D653 Standard Terminology Relating to Soil, Rock, and Contained Fluids
D664 Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration
D668 Standard Test Methods of Measuring Dimensions of Rigid Rods and Tubes Used for Electrical Insulation
D692/D692M Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures
D695 Standard Test Method for Compressive Properties of Rigid Plastics
D696 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between -30°C and 30°C With a Vitreous Silica Dilatometer
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
D698 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort (12 400 ft-lbf/ft3 (600 kN-m/m3))
D709 Standard Specification for Laminated Thermosetting Materials
D714 Standard Test Method for Evaluating Degree of Blistering of Paints
D732 Standard Test Method for Shear Strength of Plastics by Punch Tool
D737 Standard Test Method for Air Permeability of Textile Fabrics
D746 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
D747 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
D751 Standard Test Methods for Coated Fabrics
D769 Standard Specification for Black Synthetic Iron Oxide
D785 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
D789 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)
D790 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
D792 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
D806 Standard Test Method for Cement Content of Hardened Soil-Cement Mixtures
D816 Standard Test Methods for Rubber Cements
D822 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Paint and Related Coatings
D832 Standard Practice for Rubber Conditioning For Low Temperature Testing
D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D854 Standard Test Methods for Specific Gravity of Soil Solids by Water Pycnometer
D858 Standard Test Methods for Manganese in Water
D859 Standard Test Method for Silica in Water
D870 Standard Practice for Testing Water Resistance of Coatings Using Water Immersion
D876 Standard Test Methods for Nonrigid Vinyl Chloride Polymer Tubing Used for Electrical Insulation
D877 Standard Test Method for Dielectric Breakdown Voltage of Insulating Liquids Using Disk Electrodes
D882 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
D903 Standard Test Method for Peel or Stripping Strength of Adhesive Bonds
D905 Standard Test Method for Strength Properties of Adhesive Bonds in Shear by Compression Loading
D923 Standard Practices for Sampling Electrical Insulating Liquids
D946/D946M Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
D950 Standard Test Method for Impact Strength of Adhesive Bonds
D952 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
D968 Standard Test Methods for Abrasion Resistance of Organic Coatings by Falling Abrasive
D975 Standard Specification for Diesel Fuel Oils
D977 Standard Specification for Emulsified Asphalt
D979/D979M Standard Practice for Sampling Bituminous Paving Mixtures
D994/D994M Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
D1000 Standard Test Methods for Pressure-Sensitive Adhesive-Coated Tapes Used for Electrical and Electronic Applications
D1002 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
D1003 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
D1004 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
D1014 Standard Practice for Conducting Exterior Exposure Tests of Paints and Coatings on Metal Substrates
D1036 Standard Test Methods of Static Tests of Wood Poles
D1037 Standard Test Methods for Evaluating Properties of Wood-Base Fiber and Particle Panel Materials
D1038 Standard Terminology Relating to Veneer and Plywood
D1042 Standard Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
D1044 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion
D1056 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber
D1061/D1061M Standard Specification for Asbestos Lap
D1066 Standard Practice for Sampling Steam
D1067 Standard Test Methods for Acidity or Alkalinity of Water
D1068 Standard Test Methods for Iron in Water
D1073 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures
D1074 Standard Test Method for Compressive Strength of Bituminous Mixtures
D1075 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
D1079 Standard Terminology Relating to Roofing and Waterproofing
D1102 Standard Test Method for Ash in Wood
D1105 Standard Test Method for Preparation of Extractive-Free Wood
D1106 Standard Test Method for Acid-Insoluble Lignin in Wood
D1107 Standard Test Method for Ethanol-Toluene Solubility of Wood
D1108 Standard Test Method for Dichloromethane Solubles in Wood
D1109 Standard Test Method for 1% Sodium Hydroxide Solubility of Wood
D1110 Standard Test Methods for Water Solubility of Wood
D1118/D1118M Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
D1126 Standard Test Method for Hardness in Water
D1129 Standard Terminology Relating to Water
D1139/D1139M Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
D1140 Standard Test Methods for Amount of Material in Soils Finer than No. 200 (75-μm) Sieve
D1141 Standard Practice for the Preparation of Substitute Ocean Water
D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
D1143/D1143M Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
D1149 Standard Test Methods for Rubber Deterioration—Cracking in an Ozone Controlled Environment
D1165 Standard Nomenclature of Commercial Hardwoods and Softwoods
D1166 Standard Test Method for Methoxyl Groups in Wood and Related Materials
D1171 Standard Test Method for Rubber Deterioration—Surface Ozone Cracking Outdoors or Chamber (Triangular Specimens)
D1177 Standard Test Method for Freezing Point of Aqueous Engine Coolants
D1183 Standard Practices for Resistance of Adhesives to Cyclic Laboratory Aging Conditions
D1187/D1187M Standard Specification for Asphalt-Base Emulsions for Use as Protective Coatings for Metal
D1188 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
D1193 Standard Specification for Reagent Water
D1195/D1195M Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1196/D1196M Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1203 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
D1204 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
D1227 Standard Specification for Emulsified Asphalt Used as a Protective Coating for Roofing
D1238 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
D1241 Standard Specification for Materials for Soil-Aggregate Subbase, Base, and Surface Courses
D1248 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
D1266 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)
D1308 Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
D1327 Standard Specification for Bitumen-Saturated Woven Burlap Fabrics Used in Roofing and Waterproofing
D1331 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
D1335 Standard Test Method for Tuft Bind of Pile Yarn Floor Coverings
D1360 Standard Test Method for Fire Retardancy of Paints (Cabinet Method)
D1369 Standard Practice for Quantities of Materials for Bituminous Surface Treatments
D1370 Standard Test Method for Contact Compatibility Between Asphaltic Materials (Oliensis Test)
D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
D1411 Standard Test Methods for Water-Soluble Chlorides Present as Admixtures in Graded Aggregate Road Mixes
D1413 Standard Test Method for Wood Preservatives by Laboratory Soil-Block Cultures
D1414 Standard Test Methods for Rubber O-Rings
D1417 Standard Test Methods for Rubber Latices-Synthetic
D1429 Standard Test Methods for Specific Gravity of Water and Brine
D1434 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
D1435 Standard Practice for Outdoor Weathering of Plastics
D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings
D1452 Standard Practice for Soil Exploration and Sampling by Auger Borings
D1461 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
D1475 Standard Test Method For Density of Liquid Coatings, Inks, and Related Products
D1494 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
D1499 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
D1500 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)
D1505 Standard Test Method for Density of Plastics by the Density-Gradient Technique
D1524 Standard Test Method for Visual Examination of Used Electrical Insulating Oils of Petroleum Origin in the Field
D1525 Standard Test Method for Vicat Softening Temperature of Plastics
D1527 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D1554 Standard Terminology Relating to Wood-Base Fiber and Particle Panel Materials
D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1556 Standard Test Method for Density and Unit Weight of Soil in Place by the Sand-Cone Method
D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1557 Standard Test Methods for Laboratory Compaction Characteristics of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3))
D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1558 Standard Test Method for Moisture Content Penetration Resistance Relationships of Fine-Grained Soils
D1560 Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
D1561 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
D1571/D1571M Standard Specification for Woven Asbestos Cloth
D1573/D1573M Standard Test Method for Heat Aging of Asbestos Textiles
D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
D1586 Standard Test Method for Standard Penetration Test (SPT) and Split-Barrel Sampling of Soils
D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
D1587 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
D1593 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
D1598 Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1599 Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1600 Standard Terminology for Abbreviated Terms Relating to Plastics
D1603 Standard Test Method for Carbon Black Content in Olefin Plastics
D1621 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics
D1622 Standard Test Method for Apparent Density of Rigid Cellular Plastics
D1623 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
D1632 Standard Practice for Making and Curing Soil-Cement Compression and Flexure Test Specimens in the Laboratory
D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
D1633 Standard Test Methods for Compressive Strength of Molded Soil-Cement Cylinders
D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
D1634 Standard Test Method for Compressive Strength of Soil-Cement Using Portions of Beams Broken in Flexure (Modified Cube Method)
D1635 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
D1635 Standard Test Method for Flexural Strength of Soil-Cement Using Simple Beam with Third-Point Loading
D1644 Standard Test Methods for Nonvolatile Content of Varnishes
D1653 Standard Test Methods for Water Vapor Transmission of Organic Coating Films
D1654 Standard Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments
D1665 Standard Test Method for Engler Specific Viscosity of Tar Products
D1666 Standard Test Methods for Conducting Machining Tests of Wood and Wood-Base Materials
D1667 Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)
D1668 Standard Specification for Glass Fabrics (Woven and Treated) for Roofing and Waterproofing
D1669 Standard Practice for Preparation of Test Panels for Accelerated and Outdoor Weathering of Bituminous Coatings
D1670/D1670M Standard Test Method for Failure End Point in Accelerated and Outdoor Weathering of Bituminous Materials
D1676 Standard Test Methods for Film-Insulated Magnet Wire
D1683/D1683M Standard Test Method for Failure in Sewn Seams of Woven Apparel Fabrics
D1693 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics
D1708 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
D1709 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
D1730 Standard Practices for Preparation of Aluminum and Aluminum-Alloy Surfaces for Painting
D1735 Standard Practice for Testing Water Resistance of Coatings Using Water Fog Apparatus
D1743 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases
D1751 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
D1752 Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
D1754/D1754M Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
D1758 Standard Test Method of Evaluating Wood Preservatives by Field Tests with Stakes
D1761 Standard Test Methods for Mechanical Fasteners in Wood
D1762 Standard Test Method for Chemical Analysis of Wood Charcoal
D1777 Standard Test Method for Thickness of Textile Materials
D1781 Standard Test Method for Climbing Drum Peel for Adhesives
D1784 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D1785 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D1790 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact
D1822 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
D1830 Standard Test Method for Thermal Endurance of Flexible Sheet Materials Used for Electrical Insulation by the Curved Electrode Method
D1835 Standard Specification for Liquefied Petroleum (LP) Gases
D1856 Standard Test Method for Recovery of Asphalt From Solution by Abson Method
D1863/D1863M Standard Specification for Mineral Aggregate Used on Built-Up Roofs
D1864/D1864M Standard Test Method for Moisture in Mineral Aggregate Used on Built-Up Roofs
D1865/D1865M Standard Test Method for Hardness of Mineral Aggregate Used on Built-Up Roofs
D1869 Standard Specification for Rubber Rings for Asbestos-Cement Pipe
D1876 Standard Test Method for Peel Resistance of Adhesives (T-Peel Test)
D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
D1883 Standard Test Method for CBR (California Bearing Ratio) of Laboratory-Compacted Soils
D1918/D1918M Standard Test Method for Asbestos Content of Asbestos Textiles
D1929 Standard Test Method for Determining Ignition Temperature of Plastics
D1932 Standard Test Method for Thermal Endurance of Flexible Electrical Insulating Varnishes
D1970/D1970M Standard Specification for Self-Adhering Polymer Modified Bituminous Sheet Materials Used as Steep Roofing Underlayment for Ice Dam Protection
D1972 Standard Practice for Generic Marking of Plastic Products
D1985 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
D1987 Standard Test Method for Biological Clogging of Geotextile or Soil/Geotextile Filters
D1990 Standard Practice for Establishing Allowable Properties for Visually-Graded Dimension Lumber from In-Grade Tests of Full-Size Specimens
D1997 Standard Test Method for Laboratory Determination of the Fiber Content of Peat Samples by Dry Mass
D1998 Standard Specification for Polyethylene Upright Storage Tanks
D2000 Standard Classification System for Rubber Products in Automotive Applications
D2017 Standard Test Method of Accelerated Laboratory Test of Natural Decay Resistance of Woods
D2026/D2026M Standard Specification for Cutback Asphalt (Slow-Curing Type)
D2027/D2027M Standard Specification for Cutback Asphalt (Medium-Curing Type)
D2028/D2028M Standard Specification for Cutback Asphalt (Rapid-Curing Type)
D2041/D2041M Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
D2042 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene
D2047 Standard Test Method for Static Coefficient of Friction of Polish-Coated Flooring Surfaces as Measured by the James Machine
D2050 Standard Terminology Relating to Fasteners and Closures Used with Textiles
D2061 Standard Test Methods for Strength Tests for Zippers
D2062 Standard Test Methods for Operability of Zippers
D2095 Standard Test Method for Tensile Strength of Adhesives by Means of Bar and Rod Specimens
D2100/D2100M Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes
D2103 Standard Specification for Polyethylene Film and Sheeting
D2105 Standard Test Method for Longitudinal Tensile Properties of Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
D2113 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
D2122 Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2126 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
D2132 Standard Test Method for Dust-and-Fog Tracking and Erosion Resistance of Electrical Insulating Materials
D2136 Standard Test Method for Coated Fabrics-Low-Temperature Bend Test
D2137 Standard Test Methods for Rubber Property - Brittleness Point of Flexible Polymers and Coated Fabrics
D2143 Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2152 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2166 Standard Test Method for Unconfined Compressive Strength of Cohesive Soil
D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
D2167 Standard Test Method for Density and Unit Weight of Soil in Place by the Rubber Balloon Method
D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2168 Standard Test Methods for Calibration of Laboratory Mechanical-Rammer Soil Compactors
D2170/D2170M Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)
D2171/D2171M Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
D2172/D2172M Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
D2178 Standard Specification for Asphalt Glass Felt Used in Roofing and Waterproofing
D2202 Standard Test Method for Slump of Sealants
D2203 Standard Test Method for Staining from Sealants
D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2216 Standard Test Methods for Laboratory Determination of Water (Moisture) Content of Soil and Rock by Mass
D2235 Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
D2239 Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2240 Standard Test Method for Rubber Property—Durometer Hardness
D2241 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D2243 Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2244 Standard Practice for Calculation of Color Tolerances and Color Differences from Instrumentally Measured Color Coordinates
D2247 Standard Practice for Testing Water Resistance of Coatings in 100% Relative Humidity
D2248 Standard Practice for Detergent Resistance of Organic Finishes
D2261 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
D2275 Standard Test Method for Voltage Endurance of Solid Electrical Insulating Materials Subjected to Partial Discharges (Corona) on the Surface
D2278 Standard Test Method for Field Evaluation of Wood Preservatives in Round Post-Size Specimens
D2287 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
D2290 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
D2303 Standard Test Methods for Liquid-Contaminant, Inclined-Plane Tracking and Erosion of Insulating Materials
D2310 Standard Classification for Machine-Made Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2321 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
D2344/D2344M Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
D2369 Standard Test Method for Volatile Content of Coatings
D2370 Standard Test Method for Tensile Properties of Organic Coatings
D2377 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2386 Standard Test Method for Freezing Point of Aviation Fuels
D2394 Standard Test Methods for Simulated Service Testing of Wood and Wood-Base Finish Flooring
D2395 Standard Test Methods for Specific Gravity of Wood and Wood-Based Materials
D2397 Standard Specification for Cationic Emulsified Asphalt
D2399 Standard Practice for Selection of Cutback Asphalts
D2412 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D2419 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate
D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)
D2434 Standard Test Method for Permeability of Granular Soils (Constant Head)
D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2435/D2435M Standard Test Methods for One-Dimensional Consolidation Properties of Soils Using Incremental Loading
D2444 Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2452 Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453 Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2464 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2466 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2467 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2481 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
D2486 Standard Test Methods for Scrub Resistance of Wall Paints
D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2487 Standard Practice for Classification of Soils for Engineering Purposes (Unified Soil Classification System)
D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2488 Standard Practice for Description and Identification of Soils (Visual-Manual Procedure)
D2489/D2489M Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
D2493/D2493M Standard Viscosity-Temperature Chart for Asphalts
D2513 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
D2517 Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
D2519 Standard Test Method for Bond Strength of Electrical Insulating Varnishes by the Helical Coil Test
D2521 Standard Specification for Asphalt Used in Canal, Ditch, and Pond Lining
D2523 Standard Practice for Testing Load-Strain Properties of Roofing Membranes
D2555 Standard Practice for Establishing Clear Wood Strength Values
D2559 Standard Specification for Adhesives for Bonded Structural Wood Products for Use Under Exterior Exposure Conditions
D2561 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
D2564 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
D2565 Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil
D2573 Standard Test Method for Field Vane Shear Test in Cohesive Soil
D2581 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials
D2582 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
D2583 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
D2589/D2589M Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber
D2590/D2590M Standard Test Method for Sampling Chrysotile Asbestos
D2609 Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
D2626 Standard Specification for Asphalt-Saturated and Coated Organic Felt Base Sheet Used in Roofing
D2628 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
D2632 Standard Test Method for Rubber Property—Resilience by Vertical Rebound
D2643 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
D2643 Standard Specification for Prefabricated Bituminous Geomembrane Used as Canal and Ditch Liner (Exposed Type)
D2646 Standard Test Methods for Backing Fabric Characteristics of Pile Yarn Floor Coverings
D2657 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
D2661 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
D2665 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2671 Standard Test Methods for Heat-Shrinkable Tubing for Electrical Use
D2672 Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement
D2680 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
D2683 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
D2697 Standard Test Method for Volume Nonvolatile Matter in Clear or Pigmented Coatings
D2710 Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration
D2718 Standard Test Methods for Structural Panels in Planar Shear (Rolling Shear)
D2719 Standard Test Methods for Structural Panels in Shear Through-the-Thickness
D2726 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
D2728 Standard Practice for Paving Uses and Application Temperatures for Road Tars
D2729 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D2737 Standard Specification for Polyethylene (PE) Plastic Tubing
D2746 Standard Test Method for Staining Tendency of Asphalt (Stain Index)
D2751 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
D2752/D2752M Standard Test Methods for Air Permeability of Asbestos Fibers
D2765 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
D2774 Standard Practice for Underground Installation of Thermoplastic Pressure Piping
D2777 Standard Practice for Determination of Precision and Bias of Applicable Test Methods of Committee D19 on Water
D2794 Standard Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact)
D2805 Standard Test Method for Hiding Power of Paints by Reflectometry
D2822/D2822M Standard Specification for Asphalt Roof Cement, Asbestos Containing
D2823/D2823M Standard Specification for Asphalt Roof Coatings, Asbestos Containing
D2824 Standard Specification for Aluminum-Pigmented Asphalt Roof Coatings, Nonfibered, Asbestos Fibered, and Fibered without Asbestos
D2829 Standard Practice for Sampling and Analysis of Existing Built-Up Roof Systems
D2835 Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
D2837 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D2842 Standard Test Method for Water Absorption of Rigid Cellular Plastics
D2843 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics
D2844 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D2844 Standard Test Method for Resistance R-Value and Expansion Pressure of Compacted Soils
D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2845 Standard Test Method for Laboratory Determination of Pulse Velocities and Ultrasonic Elastic Constants of Rock
D2846/D2846M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
D2850 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
D2855 Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
D2859 Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
D2860/D2860M Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90 Angle and Constant Stress
D2863 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
D2872 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
D2898 Standard Practice for Accelerated Weathering of Fire-Retardant-Treated Wood for Fire Testing
D2899 Standard Practice for Establishing Allowable Stresses for Round Timber Piles
D2915 Practice for Sampling and Data-Analysis for Structural Wood and Wood-Based Products
D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2936 Standard Test Method for Direct Tensile Strength of Intact Rock Core Specimens
D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
D2937 Standard Test Method for Density of Soil in Place by the Drive-Cylinder Method
D2939 Standard Test Methods for Emulsified Bitumens Used as Protective Coatings
D2940/D2940M Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
D2944 Standard Test Method of Sampling Processed Peat Materials
D2946 Standard Terminology for Asbestos and Asbestos-Cement Products
D2947/D2947M Standard Test Method for Screen Analysis of Asbestos Fibers
D2949 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2950/D2950M Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
D2973 Standard Test Method for Total Nitrogen in Peat Materials
D2974 Standard Test Methods for Moisture, Ash, and Organic Matter of Peat and Other Organic Soils
D2976 Standard Test Method for pH of Peat Materials
D2978 Standard Test Method for Volume of Processed Peat Materials
D2980 Standard Test Method for Volume Weights, Water-Holding Capacity, and Air Capacity of Water-Saturated Peat Materials
D2985/D2985M Standard Test Method for Color of Asbestos
D2987/D2987M Standard Test Method for Moisture Content of Asbestos Fiber
D2992 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2995 Standard Practice for Estimating Application Rate of Bituminous Distributors
D2996 Standard Specification for Filament-Wound Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997 Standard Specification for Centrifugally Cast Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D3005 Standard Specification for Low-Temperature Resistant Vinyl Chloride Plastic Pressure-Sensitive Electrical Insulating Tape
D3018/D3018M Standard Specification for Class A Asphalt Shingles Surfaced with Mineral Granules
D3019 Standard Specification for Lap Cement Used with Asphalt Roll Roofing, Non-Fibered, Asbestos-Fibered, and Non-Asbestos-Fibered
D3034 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D3035 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
D3042 Standard Test Method for Insoluble Residue in Carbonate Aggregates
D3043 Standard Test Methods for Structural Panels in Flexure
D3044 Standard Test Method for Shear Modulus of Wood-Based Structural Panels
D3045 Standard Practice for Heat Aging of Plastics Without Load
D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3080/D3080M Standard Test Method for Direct Shear Test of Soils Under Consolidated Drained Conditions
D3105 Standard Index of Methods for Testing Elastomeric and Plastomeric Roofing and Waterproofing Materials
D3122 Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
D3138 Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
D3139 Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
D3141/D3141M Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
D3142/D3142M Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
D3143 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
D3145 Standard Test Method for Thermal Endurance of Electrical Insulating Varnishes by the Helical Coil Method
D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
D3155 Standard Test Method for Lime Content of Uncured Soil-Lime Mixtures
D3161/D3161M Standard Test Method for Wind-Resistance of Asphalt Shingles (Fan-Induced Method)
D3164 Standard Test Method for Strength Properties of Adhesively Bonded Plastic Lap-Shear Sandwich Joints in Shear by Tension Loading (Withdrawn 2012)
D3170 Standard Test Method for Chipping Resistance of Coatings
D3183 Standard Practice for Rubber—Preparation of Pieces for Test Purposes from Products
D3195/D3195M Standard Practice for Rotameter Calibration
D3200 Standard Specification and Test Method for Establishing Recommended Design Stresses for Round Timber Construction Poles
D3201 Standard Test Method for Hygroscopic Properties of Fire-Retardant Wood and Wood-Based Products
D3203/D3203M Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
D3212 Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
D3213 Standard Practices for Handling, Storing, and Preparing Soft Intact Marine Soil
D3222 Standard Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
D3227 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)
D3244 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
D3251 Standard Test Method for Thermal Endurance Characteristics of Electrical Insulating Varnishes Applied Over Film-Insulated Magnet Wire
D3261 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
D3262 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3273 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
D3274 Standard Test Method for Evaluating Degree of Surface Disfigurement of Paint Films by Fungal or Algal Growth, or Soil and Dirt Accumulation
D3278 Standard Test Methods for Flash Point of Liquids by Small Scale Closed-Cup Apparatus
D3279 Standard Test Method for n-Heptane Insolubles
D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3282 Standard Practice for Classification of Soils and Soil-Aggregate Mixtures for Highway Construction Purposes
D3289 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
D3299 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3311 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
D3319 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel
D3320 Standard Specification for Emulsified Coal-Tar Pitch (Mineral Colloid Type)
D3330/D3330M Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape
D3345 Standard Test Method for Laboratory Evaluation of Wood and Other Cellulosic Materials for Resistance to Termites
D3350 Standard Specification for Polyethylene Plastics Pipe and Fittings Materials
D3359 Standard Test Methods for Measuring Adhesion by Tape Test
D3363 Standard Test Method for Film Hardness by Pencil Test
D3370 Standard Practices for Sampling Water from Closed Conduits
D3381/D3381M Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3385 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
D3387 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
D3389 Standard Test Method for Coated Fabrics Abrasion Resistance (Rotary Platform Abrader)
D3398 Standard Test Method for Index of Aggregate Particle Shape and Texture
D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
D3404 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
D3406 Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
D3409 Standard Test Method for Adhesion of Asphalt-Roof Cement to Damp, Wet, or Underwater Surfaces
D3418 Standard Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
D3423/D3423M Standard Practice for Application of Emulsified Coal-Tar Pitch (Mineral Colloid Type)
D3441 Standard Test Method for Mechanical Cone Penetration Tests of Soil
D3441 Standard Test Method for Mechanical Cone Penetration Tests of Soil
D3462/D3462M Standard Specification for Asphalt Shingles Made from Glass Felt and Surfaced with Mineral Granules
D3467 Standard Test Method for Carbon Tetrachloride Activity of Activated Carbon
D3468 Standard Specification for Liquid-Applied Neoprene and Chlorosulfonated Polyethylene Used in Roofing and Waterproofing
D3487 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
D3498 Standard Specification for Adhesives for Field-Gluing Plywood to Lumber Framing for Floor Systems
D3499 Standard Test Method for Toughness of Wood-Based Structural Panels
D3500 Standard Test Methods for Structural Panels in Tension
D3501 Standard Test Methods for Wood-Based Structural Panels in Compression
D3517 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3542 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
D3549/D3549M Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
D3550 Standard Practice for Thick Wall, Ring-Lined, Split Barrel, Drive Sampling of Soils
D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
D3551 Standard Practice for Laboratory Preparation of Soil-Lime Mixtures Using Mechanical Mixer
D3567 Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
D3574 Standard Test Methods for Flexible Cellular Materials—Slab, Bonded, and Molded Urethane Foams
D3575 Standard Test Methods for Flexible Cellular Materials Made From Olefin Polymers
D3597 Standard Specification for Woven Upholstery Fabrics-Plain, Tufted, or Flocked
D3617 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
D3625 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
D3628 Standard Practice for Selection and Use of Emulsified Asphalts
D3633 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems
D3638 Standard Test Method for Comparative Tracking Index of Electrical Insulating Materials
D3639/D3639M Standard Test Method for Classification of Asbestos by Quebec Standard Test
D3654/D3654M Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
D3656 Standard Specification for Insect Screening and Louver Cloth Woven from Vinyl-Coated Glass Yarns
D3665 Standard Practice for Random Sampling of Construction Materials
D3666 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
D3670 Standard Guide for Determination of Precision and Bias of Methods of Committee D22
D3676 Standard Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
D3679 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3689 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
D3689 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
D3690 Standard Performance Specification for Vinyl-Coated and Urethane-Coated Upholstery Fabrics-Indoor
D3699 Standard Specification for Kerosine
D3737 Standard Practice for Establishing Allowable Properties for Structural Glued Laminated Timber (Glulam)
D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D3740 Standard Practice for Minimum Requirements for Agencies Engaged in Testing and/or Inspection of Soil and Rock as Used in Engineering Design and Construction
D3744/D3744M Standard Test Method for Aggregate Durability Index
D3745 Standard Practice for Installation of Prefabricated Asphalt Reservoir, Pond, Canal, and Ditch Liner (Exposed Type)
D3746 Standard Test Method for Impact Resistance of Bituminous Roofing Systems
D3747 Standard Specification for Emulsified Asphalt Adhesive for Adhering Roof Insulation
D3752 Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
D3753 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
D3754 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3759/D3759M Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
D3763 Standard Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
D3767 Standard Practice for Rubber—Measurement of Dimensions
D3776/D3776M Standard Test Methods for Mass Per Unit Area (Weight) of Fabric
D3786/D3786M Standard Test Method for Bursting Strength of Textile Fabrics—Diaphragm Bursting Strength Tester Method
D3787 Standard Test Method for Bursting Strength of Textiles-Constant-Rate-of-Traverse (CRT) Ball Burst Test
D3791/D3791M Standard Practice for Evaluating the Effects of Heat on Asphalts
D3792 Standard Test Method for Water Content of Coatings by Direct Injection Into a Gas Chromatograph
D3801 Standard Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
D3802 Standard Test Method for Ball-Pan Hardness of Activated Carbon
D3805/D3805M Standard Guide for Application of Aluminum-Pigmented Asphalt Roof Coatings
D3828 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester
D3839 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe
D3840 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
D3841 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
D3850 Standard Test Method for Rapid Thermal Degradation of Solid Electrical Insulating Materials By Thermogravimetric Method (TGA)
D3856 Standard Guide for Management Systems in Laboratories Engaged in Analysis of Water
D3864 Standard Guide for Continual On-Line Monitoring Systems for Water Analysis
D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
D3877 Standard Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures
D3880/D3880M Standard Test Method for Asbestos Strength Units
D3884 Standard Guide for Abrasion Resistance of Textile Fabrics (Rotary Platform, Double-Head Method)
D3895 Standard Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
D3902 Standard Test Method for Rubber Hose for Gas Diffusion of Liquefied Petroleum Gas
D3909 Standard Specification for Asphalt Roll Roofing (Glass Felt) Surfaced With Mineral Granules
D3910 Standard Practices for Design, Testing, and Construction of Slurry Seal
D3921 Standard Test Method for Oil and Grease and Petroleum Hydrocarbons in Water
D3936 Standard Test Method for Resistance to Delamination of the Secondary Backing of Pile Yarn Floor Covering
D3957 Standard Practices for Establishing Stress Grades for Structural Members Used in Log Buildings
D3960 Standard Practice for Determining Volatile Organic Compound (VOC) Content of Paints and Related Coatings
D3963/D3963M Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
D3965 Standard Classification System and Basis for Specifications for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
D3966 Standard Test Methods for Deep Foundations Under Lateral Load
D3966 Standard Test Methods for Deep Foundations Under Lateral Load
D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3967 Standard Test Method for Splitting Tensile Strength of Intact Rock Core Specimens
D3975 Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D3999 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
D4013 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
D4014 Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
D4015 Standard Test Methods for Modulus and Damping of Soils by Resonant-Column Method
D4016 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
D4016 Standard Test Method for Viscosity of Chemical Grouts by Brookfield Viscometer (Laboratory Method)
D4017 Standard Test Method for Water in Paints and Paint Materials by Karl Fischer Method
D4022 Standard Specification for Coal Tar Roof Cement, Asbestos Containing
D4024 Standard Specification for Machine Made “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4043 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
D4043 Standard Guide for Selection of Aquifer Test Method in Determining Hydraulic Properties by Well Techniques
D4044 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
D4044 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
D4045 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
D4050 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems
D4050 Standard Test Method for (Field Procedure) for Withdrawal and Injection Well Tests for Determining Hydraulic Properties of Aquifer Systems
D4060 Standard Test Method for Abrasion Resistance of Organic Coatings by the Taber Abraser
D4065 Standard Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
D4068 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4070 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
D4071 Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
D4073 Standard Test Method for Tensile-Tear Strength of Bituminuous Roofing Membranes
D4074/D4074M Standard Test Method for Bitumen and Aggregate Content of Bitumen-Aggregate Mixtures From Roofing Samples
D4078 Standard Specification for Water Emulsion Floor Polish
D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4083 Standard Practice for Description of Frozen Soils (Visual-Manual Procedure)
D4097 Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4101 Standard Specification for Polypropylene Injection and Extrusion Materials
D4104 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
D4104 Standard Test Method (Analytical Procedure) for Determining Transmissivity of Nonleaky Confined Aquifers by Overdamped Well Response to Instantaneous Change in Head (Slug Tests)
D4105 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4105 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Modified Theis Nonequilibrium Method
D4106 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4106 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Nonleaky Confined Aquifers by the Theis Nonequilibrium Method
D4124 Standard Test Method for Separation of Asphalt into Four Fractions
D4125/D4125M Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
D4145 Standard Test Method for Coating Flexibility of Prepainted Sheet
D4157 Standard Test Method for Abrasion Resistance of Textile Fabrics (Oscillatory Cylinder Method)
D4161 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
D4186 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D4186 Standard Test Method for One-Dimensional Consolidation Properties of Saturated Cohesive Soils Using Controlled-Strain Loading
D4204 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
D4214 Standard Test Methods for Evaluating the Degree of Chalking of Exterior Paint Films
D4215 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
D4216 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
D4218 Standard Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils
D4219 Standard Test Method for Unconfined Compressive Strength Index of Chemical- Grouted Soils
D4220 Standard Practices for Preserving and Transporting Soil Samples
D4220 Standard Practices for Preserving and Transporting Soil Samples
D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4221 Standard Test Method for Dispersive Characteristics of Clay Soil by Double Hydrometer
D4223/D4223M Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
D4223/D4223M Standard Practice for Preparation of Test Specimens of Asphalt-Stabilized Soils
D4226 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4253 Standard Test Methods for Maximum Index Density and Unit Weight of Soils Using a Vibratory Table
D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4254 Standard Test Methods for Minimum Index Density and Unit Weight of Soils and Calculation of Relative Density
D4258 Standard Practice for Surface Cleaning Concrete for Coating
D4259 Standard Practice for Abrading Concrete
D4260 Standard Practice for Liquid and Gelled Acid Etching of Concrete
D4261 Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
D4263 Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4272 Standard Test Method for Total Energy Impact of Plastic Films By Dart Drop
D4280 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
D4311/D4311M Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils
D4320/D4320M Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters
D4320/D4320M Standard Practice for Laboratory Preparation of Chemically Grouted Soil Specimens for Obtaining Engineering Parameters
D4329 Standard Practice for Fluorescent UV Exposure of Plastics
D4354 Standard Practice for Sampling of Geosynthetics for Testing
D4354 Standard Practice for Sampling of Geosynthetics for Testing
D4355 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
D4355 Standard Test Method for Deterioration of Geotextiles by Exposure to Light, Moisture and Heat in a Xenon Arc Type Apparatus
D4359 Standard Test Method for Determining Whether a Material Is a Liquid or a Solid
D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils
D4373 Standard Test Method for Rapid Determination of Carbonate Content of Soils
D4375 Standard Practice for Basic Statistics in Committee D-19 on Water
D4380 Standard Test Method for Density of Bentonitic Slurries
D4380 Standard Test Method for Density of Bentonitic Slurries
D4381 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
D4381 Standard Test Method for Sand Content by Volume of Bentonitic Slurries
D4383 Standard Specification for Plowable, Raised Retroreflective Pavement Markers
D4385 Standard Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
D4388 Standard Specification for Nonmetallic Semi-Conducting and Electrically Insulating Rubber Tapes
D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
D4394 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Rigid Plate Loading Method
D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
D4395 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Flexible Plate Loading Method
D4397 Standard Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
D4398 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
D4402 Standard Test Method for Viscosity Determination of Asphalt at Elevated Temperatures Using a Rotational Viscometer
D4403 Standard Practice for Extensometers Used in Rock
D4403 Standard Practice for Extensometers Used in Rock
D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
D4404 Standard Test Method for Determination of Pore Volume and Pore Volume Distribution of Soil and Rock by Mercury Intrusion Porosimetry
D4427 Standard Classification of Peat Samples by Laboratory Testing
D4427 Standard Classification of Peat Samples by Laboratory Testing
D4428/D4428M Standard Test Methods for Crosshole Seismic Testing
D4428/D4428M Standard Test Methods for Crosshole Seismic Testing
D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
D4429 Standard Test Method for CBR (California Bearing Ratio) of Soils in Place
D4434/D4434M Standard Specification for Poly(Vinyl Chloride) Sheet Roofing
D4435 Standard Test Method for Rock Bolt Anchor Pull Test
D4435 Standard Test Method for Rock Bolt Anchor Pull Test
D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test
D4436 Standard Test Method for Rock Bolt Long-Term Load Retention Test
D4437 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
D4437 Standard Practice for Non-destructive Testing (NDT) for Determining the Integrity of Seams Used in Joining Flexible Polymeric Sheet Geomembranes
D4439 Standard Terminology for Geosynthetics
D4439 Standard Terminology for Geosynthetics
D4442 Standard Test Methods for Direct Moisture Content Measurement of Wood and Wood-Base Materials
D4443 Standard Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
D4444 Standard Test Method for Laboratory Standardization and Calibration of Hand-Held Moisture Meters
D4445 Standard Test Method for Fungicides for Controlling Sapstain and Mold on Unseasoned Lumber (Laboratory Method)
D4446 Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
D4452 Standard Practice for X-Ray Radiography of Soil Samples
D4452 Standard Practice for X-Ray Radiography of Soil Samples
D4460 Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
D4469 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
D4477 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
D4479 Standard Specification for Asphalt Roof Coatings—Asbestos-Free
D4483 Standard Practice for Evaluating Precision for Test Method Standards in the Rubber and Carbon Black Manufacturing Industries
D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
D4491 Standard Test Methods for Water Permeability of Geotextiles by Permittivity
D4496 Standard Test Method for D-C Resistance or Conductance of Moderately Conductive Materials
D4505 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
D4506 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Mass Using Radial Jacking Test
D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
D4511 Standard Test Method for Hydraulic Conductivity of Essentially Saturated Peat
D4525 Standard Test Method for Permeability of Rocks by Flowing Air
D4525 Standard Test Method for Permeability of Rocks by Flowing Air
D4531 Standard Test Methods for Bulk Density of Peat and Peat Products
D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
D4533 Standard Test Method for Trapezoid Tearing Strength of Geotextiles
D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
D4535 Standard Test Methods for Measurement of Thermal Expansion of Rock Using Dilatometer
D4541 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
D4542 Standard Test Method for Pore Water Extraction and Determination of the Soluble Salt Content of Soils by Refractometer
D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
D4543 Standard Practices for Preparing Rock Core as Cylindrical Test Specimens and Verifying Conformance to Dimensional and Shape Tolerances
D4544 Standard Practice for Estimating Peat Deposit Thickness
D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils
D4546 Standard Test Methods for One-Dimensional Swell or Collapse of Cohesive Soils
D4551 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
D4552/D4552M Standard Practice for Classifying Hot-Mix Recycling Agents
D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock
D4553 Standard Test Method for Determining In Situ Creep Characteristics of Rock
D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
D4554 Standard Test Method for In Situ Determination of Direct Shear Strength of Rock Discontinuities
D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
D4555 Standard Test Method for Determining Deformability and Strength of Weak Rock by an In Situ Uniaxial Compressive Test
D4561 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
D4564 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
D4564 Standard Test Method for Density and Unit Weight of Soil in Place by the Sleeve Method
D4580 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
D4585 Standard Practice for Testing Water Resistance of Coatings Using Controlled Condensation
D4586 Standard Specification for Asphalt Roof Cement, Asbestos-Free
D4587 Standard Practice for Fluorescent UV-Condensation Exposures of Paint and Related Coatings
D4592 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles
D4594 Standard Test Method for Effects of Temperature on Stability of Geotextiles
D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
D4595 Standard Test Method for Tensile Properties of Geotextiles by the Wide-Width Strip Method
D4601 Standard Specification for Asphalt-Coated Glass Fiber Base Sheet Used in Roofing
D4602 Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
D4609 Standard Guide for Evaluating Effectiveness of Admixtures for Soil Stabilization
D4611 Standard Test Method for Specific Heat of Rock and Soil
D4611 Standard Test Method for Specific Heat of Rock and Soil
D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4612 Standard Practice for Calculating Thermal Diffusivity of Rocks
D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge
D4623 Standard Test Method for Determination of In Situ Stress in Rock Mass by Overcoring Method—USBM Borehole Deformation Gauge
D4630 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
D4630 Standard Test Method for Determining Transmissivity and Storage Coefficient of Low-Permeability Rocks by In Situ Measurements Using the Constant Head Injection Test
D4631 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
D4631 Standard Test Method for Determining Transmissivity and Storativity of Low Permeability Rocks by In Situ Measurements Using Pressure Pulse Technique
D4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
D4632 Standard Test Method for Grab Breaking Load and Elongation of Geotextiles
D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers
D4633 Standard Test Method for Energy Measurement for Dynamic Penetrometers
D4637/D4637M Standard Specification for EPDM Sheet Used In Single-Ply Roof Membrane
D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
D4643 Standard Test Method for Determination of Water (Moisture) Content of Soil by Microwave Oven Heating
D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
D4644 Standard Test Method for Slake Durability of Shales and Similar Weak Rocks
D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
D4645 Standard Test Method for Determination of In-Situ Stress in Rock Using Hydraulic Fracturing Method
D4647 Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
D4647 Standard Test Method for Identification and Classification of Dispersive Clay Soils by the Pinhole Test
D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
D4648/D4648M Standard Test Method for Laboratory Miniature Vane Shear Test for SaturatedFine-Grained Clayey Soil
D4674 Standard Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
D4694 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
D4695 Standard Guide for General Pavement Deflection Measurements
D4696 Standard Guide for Pore-Liquid Sampling from the Vadose Zone
D4696 Standard Guide for Pore-Liquid Sampling from the Vadose Zone
D4700 Standard Guide for Soil Sampling from the Vadose Zone
D4700 Standard Guide for Soil Sampling from the Vadose Zone
D4716 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
D4716 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
D4718 Standard Practice for Correction of Unit Weight and Water Content for Soils Containing Oversize Particles
D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils
D4719 Standard Test Methods for Prebored Pressuremeter Testing in Soils
D4726 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
D4729 Standard Test Method for In Situ Stress and Modulus of Deformation Using Flatjack Method
D4747 Standard Test Method for Determining Unreacted Monomer Content of Latexes Using Gas-Liquid Chromatography
D4748 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile
D4751 Standard Test Method for Determining Apparent Opening Size of a Geotextile
D4753 Standard Guide for Evaluating, Selecting, and Specifying Balances and Standard Masses for Use in Soil, Rock, and Construction Materials Testing
D4756 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics
D4759 Standard Practice for Determining the Specification Conformance of Geosynthetics
D4761 Standard Test Methods for Mechanical Properties of Lumber and Wood-Base Structural Material
D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D4767 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
D4788 Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
D4791 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
D4792 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions
D4798/D4798M Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Xenon-Arc Method)
D4799 Standard Practice for Accelerated Weathering Test Conditions and Procedures for Bituminous Materials (Fluorescent UV, Water Spray, and Condensation Method)
D4802 Standard Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
D4803 Standard Test Method for Predicting Heat Buildup in PVC Building Products
D4804 Standard Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
D4806 Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
D4811 Standard Specification for Nonvulcanized (Uncured) Rubber Sheet Used as Roof Flashing
D4814 Standard Specification for Automotive Spark-Ignition Engine Fuel
D4821 Standard Guide for Carbon Black - Validation of Test Method Precision and Bias
D4829 Standard Test Method for Expansion Index of Soils
D4829 Standard Test Method for Expansion Index of Soils
D4830 Standard Test Methods for Characterizing Thermoplastic Fabrics Used in Roofing and Waterproofing
D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
D4832 Standard Test Method for Preparation and Testing of Controlled Low Strength Material (CLSM) Test Cylinders
D4833 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
D4833 Standard Test Method for Index Puncture Resistance of Geomembranes and Related Products
D4840 Standard Guide for Sampling Chain-of-Custody Procedures
D4851 Standard Test Methods for Coated and Laminated Fabrics for Architectural Use
D4866/D4866M Standard Performance Specification for Coal Tar Pitch Emulsion Pavement Sealer Mix Formulations Containing Mineral Aggregates and Optional Polymeric Admixtures
D4867/D4867M Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
D4869/D4869M Standard Specification for Asphalt-Saturated Organic Felt Underlayment Used in Steep Slope Roofing
D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
D4873 Standard Guide for Identification, Storage, and Handling of Geosynthetic Rolls and Samples
D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
D4879 Standard Guide for Geotechnical Mapping of Large Underground Openings in Rock
D4884 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
D4884 Standard Test Method for Strength of Sewn or Thermally Bonded Seams of Geotextiles
D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
D4885 Standard Test Method for Determining Performance Strength of Geomembranes by the Wide Strip Tensile Method
D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
D4886 Standard Test Method for Abrasion Resistance of Geotextiles (Sand Paper/Sliding Block Method)
D4887/D4887M Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
D4897/D4897M Standard Specification for Asphalt-Coated Glass-Fiber Venting Base Sheet Used in Roofing
D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
D4914 Standard Test Methods for Density and Unit Weight of Soil and Rock in Place by the Sand Replacement Method in a Test Pit
D4932 Standard Test Method for Fastener Rupture and Tear Resistance of Roofing and Waterproofing Sheets, Roll Roofing, and Shingles
D4933 Standard Guide for Moisture Conditioning of Wood and Wood-Base Materials
D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4943 Standard Test Method for Shrinkage Factors of Soils by the Wax Method
D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D4944 Standard Test Method for Field Determination of Water (Moisture) Content of Soil by the Calcium Carbide Gas Pressure Tester
D4945 Standard Test Method for High-Strain Dynamic Testing of Piles
D4945 Standard Test Method for High-Strain Dynamic Testing of Piles
D4956 Standard Specification for Retroreflective Sheeting for Traffic Control
D4957 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
D4959 Standard Test Method for Determination of Water (Moisture) Content of Soil By Direct Heating
D4968 Standard Guide for Annual Review of Test Methods and Specifications for Plastics
D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
D4971 Standard Test Method for Determining In Situ Modulus of Deformation of Rock Using Diametrically Loaded 76-mm (3-in.) Borehole Jack
D4972 Standard Test Method for pH of Soils
D4976 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials
D4977 Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
D4986 Standard Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
D4989 Standard Test Method for Apparent Viscosity (Flow) of Roofing Bitumens Using the Parallel Plate Plastometer
D4990 Standard Specification for Coal Tar Glass Felt Used in Roofing and Waterproofing
D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control
D4992 Standard Practice for Evaluation of Rock to be Used for Erosion Control
D5025 Standard Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
D5030 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
D5030 Standard Test Method for Density of Soil and Rock in Place by the Water Replacement Method in a Test Pit
D5034 Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)
D5035 Standard Test Method for Breaking Force and Elongation of Textile Fabrics (Strip Method)
D5036 Standard Practice for Application of Adhered Poly(Vinyl Chloride) Sheet Roofing
D5048 Standard Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using 125-mm Flame
D5055 Standard Specification for Establishing and Monitoring Structural Capacities of Prefabricated Wood I-Joists
D5076 Standard Test Method for Measuring Voids in Roofing and Waterproofing Membranes
D5078/D5078M Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
D5079 Standard Practices for Preserving and Transporting Rock Core Samples
D5079 Standard Practices for Preserving and Transporting Rock Core Samples
D5080 Standard Test Method for Rapid Determination of Percent Compaction
D5080 Standard Test Method for Rapid Determination of Percent Compaction
D5081/D5081M Standard Test Method for Aggregate Layer Hiding Power
D5082 Standard Practice for Application of Mechanically Attached Poly(Vinyl Chloride) Sheet Roofing
D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5084 Standard Test Methods for Measurement of Hydraulic Conductivity of Saturated Porous Materials Using a Flexible Wall Permeameter
D5088 Standard Practice for Decontamination of Field Equipment Used at Waste Sites
D5088 Standard Practice for Decontamination of Field Equipment Used at Waste Sites
D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells
D5092 Standard Practice for Design and Installation of Groundwater Monitoring Wells
D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
D5093 Standard Test Method for Field Measurement of Infiltration Rate Using Double-Ring Infiltrometer with Sealed-Inner Ring
D5095 Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
D5100/D5100M Standard Test Method for Adhesion of Mineral Aggregate to Hot Bitumen
D5101 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
D5101 Standard Test Method for Measuring the Soil-Geotextile System Clogging Potential by the Gradient Ratio
D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
D5102 Standard Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures
D5106 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
D5107 Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
D5116 Standard Guide for Small-Scale Environmental Chamber Determinations of Organic Emissions From Indoor Materials/Products
D5121 Standard Practice for Preparation of Rock Slabs for Durability Testing
D5121 Standard Practice for Preparation of Rock Slabs for Durability Testing
D5124 Standard Practice for Testing and Use of a Random Number Generator in Lumber and Wood Products Simulation
D5126/D5126M Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
D5126/D5126M Standard Guide for Comparison of Field Methods for Determining Hydraulic Conductivity in Vadose Zone
D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
D5141 Standard Test Method for Determining Filtering Efficiency and Flow Rate of the Filtration Component of a Sediment Retention Device
D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
D5143 Standard Test Method for Analysis of Nitroaromatic and Nitramine Explosive in Soil by High Performance Liquid Chromatography
D5147/D5147M Standard Test Methods for Sampling and Testing Modified Bituminous Sheet Material
D5148 Standard Test Method for Centrifuge Kerosine Equivalent
D5161 Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
D5167 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
D5172 Standard Guide for Documenting the Standard Operating Procedures Used for the Analysis of Water
D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
D5195 Standard Test Method for Density of Soil and Rock In-Place at Depths Below Surface by Nuclear Methods
D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
D5199 Standard Test Method for Measuring the Nominal Thickness of Geosynthetics
D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
D5202 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
D5206 Standard Test Method for Windload Resistance of Rigid Plastic Siding
D5207 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials
D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
D5220 Standard Test Method for Water Mass per Unit Volume of Soil and Rock In-Place by the Neutron Depth Probe Method
D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
D5239 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization
D5240 Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate
D5240 Standard Test Method for Testing Rock Slabs to Evaluate Soundness of Riprap by Use of Sodium Sulfate or Magnesium Sulfate
D5249 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
D5254/D5254M Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site
D5254/D5254M Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site
D5255 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
D5255 Standard Practice for Certification of Personnel Engaged in the Testing of Soil and Rock
D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
D5261 Standard Test Method for Measuring Mass per Unit Area of Geotextiles
D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
D5262 Standard Test Method for Evaluating the Unconfined Tension Creep and Creep Rupture Behavior of Geosynthetics
D5268 Standard Specification for Topsoil Used for Landscaping Purposes
D5269 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
D5269 Standard Test Method for Determining Transmissivity of Nonleaky Confined Aquifers by the Theis Recovery Method
D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
D5270 Standard Test Method for Determining Transmissivity and Storage Coefficient of Bounded, Nonleaky, Confined Aquifers
D5295 Standard Guide for Preparation of Concrete Surfaces for Adhered (Bonded) Membrane Waterproofing Systems
D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
D5298 Standard Test Method for Measurement of Soil Potential (Suction) Using Filter Paper
D5299 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
D5299 Standard Guide for Decommissioning of Groundwater Wells, Vadose Zone Monitoring Devices, Boreholes, and Other Devices for Environmental Activities
D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5311 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
D5312 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
D5312 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Freezing and Thawing Conditions
D5313 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
D5313 Standard Test Method for Evaluation of Durability of Rock for Erosion Control Under Wetting and Drying Conditions
D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone
D5314 Standard Guide for Soil Gas Monitoring in the Vadose Zone
D5319 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
D5321 Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
D5321 Standard Test Method for Determining the Coefficient of Soil and Geosynthetic or Geosynthetic and Geosynthetic Friction by the Direct Shear Method
D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
D5322 Standard Practice for Immersion Procedures for Evaluating the Chemical Resistance of Geosynthetics to Liquids
D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
D5323 Standard Practice for Determination of 2 % Secant Modulus for Polyethylene Geomembranes
D5329 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
D5333 Standard Test Method for Measurement of Collapse Potential of Soils
D5333 Standard Test Method for Measurement of Collapse Potential of Soils
D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
D5334 Standard Test Method for Determination of Thermal Conductivity of Soil and Soft Rock by Thermal Needle Probe Procedure
D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
D5335 Standard Test Method for Linear Coefficient of Thermal Expansion of Rock Using Bonded Electric Resistance Strain Gauges
D5340 Standard Test Method for Airport Pavement Condition Index Surveys
D5359 Standard Specification for Glass Cullet Recovered from Waste for Use in Manufacture of Glass Fiber
D5360 Standard Practice for Design and Construction of Bituminous Surface Treatments
D5361/D5361M Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
D5374 Standard Test Methods for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5385 Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
D5391 Standard Test Method for Electrical Conductivity and Resistivity of a Flowing High Purity Water Sample
D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
D5397 Standard Test Method for Evaluation of Stress Crack Resistance of Polyolefin Geomembranes Using Notched Constant Tensile Load Test
D5404/D5404M Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
D5405/D5405M Standard Test Method for Conducting Time-to-Failure (Creep-Rupture) Tests of Joints Fabricated from Nonbituminous Organic Roof Membrane Material
D5408 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors
D5408 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part One - Additional Identification Descriptors
D5409/D5409M Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical Descriptors
D5409/D5409M Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Two - Physical Descriptors
D5410 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage Descriptors
D5410 Standard Guide for Set of Data Elements to Describe a Groundwater Site; Part Three - Usage Descriptors
D5420 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
D5421 Standard Specification for Contact Molded Fiberglass (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D5423 Standard Specification for Forced-Convection Laboratory Ovens for Evaluation of Electrical Insulation
D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
D5434 Standard Guide for Field Logging of Subsurface Explorations of Soil and Rock
D5435 Standard Test Method for Diagnostic Soil Test for Plant Growth and Food Chain Protection
D5444 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate
D5447 Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem
D5447 Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem
D5456 Standard Specification for Evaluation of Structural Composite Lumber Products
D5457 Standard Specification for Computing Reference Resistance of Wood-Based Materials and Structural Connections for Load and Resistance Factor Design
D5469 Standard Guide for Application of New Spray Applied Polyurethane Foam and Coated Roofing Systems
D5472 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
D5472 Standard Test Method for Determining Specific Capacity and Estimating Transmissivity at the Control Well
D5473 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
D5473 Standard Test Method for (Analytical Procedure for) Analyzing the Effects of Partial Penetration of Control Well and Determining the Horizontal and Vertical Hydraulic Conductivity in a Nonleaky Confined Aquifer
D5474 Standard Guide for Selection of Data Elements for Groundwater Investigations
D5474 Standard Guide for Selection of Data Elements for Groundwater Investigations
D5490 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
D5490 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
D5493 Standard Test Method for Permittivity of Geotextiles Under Load
D5493 Standard Test Method for Permittivity of Geotextiles Under Load
D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
D5494 Standard Test Method for the Determination of Pyramid Puncture Resistance of Unprotected and Protected Geomembranes
D5496 Standard Practice for In Field Immersion Testing of Geosynthetics
D5496 Standard Practice for In Field Immersion Testing of Geosynthetics
D5504 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Chemiluminescence
D5505 Standard Practice for Classifying Emulsified Recycling Agents
D5506 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
D5514 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
D5514 Standard Test Method for Large Scale Hydrostatic Puncture Testing of Geosynthetics
D5516 Standard Test Method for Evaluating the Flexural Properties of Fire-Retardant Treated Softwood Plywood Exposed to Elevated Temperatures
D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
D5519 Standard Test Methods for Particle Size Analysis of Natural and Man-Made Riprap Materials
D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
D5520 Standard Test Method for Laboratory Determination of Creep Properties of Frozen Soil Samples by Uniaxial Compression
D5521 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
D5521 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
D5536 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
D5539 Standard Specification for Seed Starter Mix
D5546 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5550 Standard Test Method for Specific Gravity of Soil Solids by Gas Pycnometer
D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
D5567 Standard Test Method for Hydraulic Conductivity Ratio (HCR) Testing of Soil/Geotextile Systems
D5572 Standard Specification for Adhesives Used for Finger Joints in Nonstructural Lumber Products
D5581 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
D5582 Standard Test Method for Determining Formaldehyde Levels from Wood Products Using a Desiccator
D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
D5596 Standard Test Method for Microscopic Evaluation of the Dispersion of Carbon Black in Polyolefin Geosynthetics
D5602/D5602M Standard Test Method for Static Puncture Resistance of Roofing Membrane Specimens
D5603 Standard Classification for Rubber Compounding Materials—Recycled Vulcanizate Particulate Rubber
D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5607 Standard Test Method for Performing Laboratory Direct Shear Strength Tests of Rock Specimens Under Constant Normal Force
D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5608 Standard Practices for Decontamination of Field Equipment Used at Low Level Radioactive Waste Sites
D5609 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
D5609 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
D5610 Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
D5610 Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
D5611 Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
D5611 Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
D5617 Standard Test Method for Multi-Axial Tension Test for Geosynthetics
D5617 Standard Test Method for Multi-Axial Tension Test for Geosynthetics
D5624 Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
D5635/D5635M Standard Test Method for Dynamic Puncture Resistance of Roofing Membrane Specimens
D5636/D5636M Standard Test Method for Low Temperature Unrolling of Felt or Sheet Roofing and Waterproofing Materials
D5641 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
D5641 Standard Practice for Geomembrane Seam Evaluation by Vacuum Chamber
D5642 Standard Test Method for Sealed Tube Chemical Compatibility Test
D5643 Standard Specification for Coal Tar Roof Cement, Asbestos Free
D5651 Standard Test Method for Surface Bond Strength of Wood-Base Fiber and Particle Panel Materials
D5652 Standard Test Methods for Bolted Connections in Wood and Wood-Base Products
D5663 Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard
D5664 Standard Test Method for Evaluating the Effects of Fire-Retardant Treatments and Elevated Temperatures on Strength Properties of Fire-Retardant Treated Lumber
D5665 Standard Specification for Thermoplastic Fabrics Used in Cold-Applied Roofing and Waterproofing
D5683/D5683M Standard Test Method for Flexibility of Roofing and Waterproofing Materials and Membranes
D5685 Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
D5703 Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry
D5710 Standard Specification for Trinidad Lake Modified Asphalt
D5715 Standard Test Method for Estimating the Degree of Humification of Peat and Other Organic Soils (Visual/Manual Method)
D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
D5716 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
D5718 Standard Guide for Documenting a Groundwater Flow Model Application
D5718 Standard Guide for Documenting a Groundwater Flow Model Application
D5719 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
D5719 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
D5720 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
D5720 Standard Practice for Static Calibration of Electronic Transducer-Based Pressure Measurement Systems for Geotechnical Purposes
D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
D5721 Standard Practice for Air-Oven Aging of Polyolefin Geomembranes
D5726 Standard Specification for Thermoplastic Fabrics Used in Hot-Applied Roofing and Waterproofing
D5727/D5727M Standard Specification for Emulsified Refined Coal Tar (Mineral Colloid Type)
D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater
D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater
D5730 Standard Guide for Site Characterization for Environmental Purposes With Emphasis on Soil, Rock, the Vadose Zone and Groundwater
D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
D5731 Standard Test Method for Determination of the Point Load Strength Index of Rock and Application to Rock Strength Classifications
D5737 Standard Guide for Methods for Measuring Well Discharge
D5737 Standard Guide for Methods for Measuring Well Discharge
D5738 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses
D5738 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams for Single Analyses
D5747 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
D5747 Standard Practice for Tests to Evaluate the Chemical Resistance of Geomembranes to Liquids
D5751 Standard Specification for Adhesives Used for Laminate Joints in Nonstructural Lumber Products
D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging
D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging
D5753 Standard Guide for Planning and Conducting Borehole Geophysical Logging
D5754 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses
D5754 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Trilinear Diagrams for Two or More Analyses
D5759 Standard Guide for Characterization of Coal Fly Ash and Clean Coal Combustion Fly Ash for Potential Uses
D5764 Standard Test Method for Evaluating Dowel-Bearing Strength of Wood and Wood-Based Products
D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
D5777 Standard Guide for Using the Seismic Refraction Method for Subsurface Investigation
D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
D5778 Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils
D5779 Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control
D5779 Standard Test Method for Field Determination of Apparent Specific Gravity of Rock and Manmade Materials for Erosion Control
D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
D5780 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
D5781 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5781 Standard Guide for Use of Dual-Wall Reverse-Circulation Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5782 Standard Guide for Use of Direct Air-Rotary Drilling for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5783 Standard Guide for Use of Direct Rotary Drilling with Water-Based Drilling Fluid for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5784 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5784 Standard Guide for Use of Hollow-Stem Augers for Geoenvironmental Exploration and the Installation of Subsurface Water-Quality Monitoring Devices
D5785 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
D5785 Standard Test Method for (Analytical Procedure) for Determining Transmissivity of Confined Nonleaky Aquifers by Underdamped Well Response to Instantaneous Change in Head (Slug Test)
D5786 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
D5786 Standard Practice for (Field Procedure) for Constant Drawdown Tests in Flowing Wells for Determining Hydraulic Properties of Aquifer Systems
D5787 Standard Practice for Monitoring Well Protection
D5787 Standard Practice for Monitoring Well Protection
D5792 Standard Practice for Generation of Environmental Data Related to Waste Management Activities: Development of Data Quality Objectives
D5798 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines
D5801 Standard Test Method for Toughness and Tenacity of Bituminous Materials
D5818 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
D5818 Standard Practice for Exposure and Retrieval of Samples to Evaluate Installation Damage of Geosynthetics
D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
D5819 Standard Guide for Selecting Test Methods for Experimental Evaluation of Geosynthetic Durability
D5820 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
D5820 Standard Practice for Pressurized Air Channel Evaluation of Dual Seamed Geomembranes
D5821 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
D5843 Standard Guide for Application of Fully Adhered Vulcanized Rubber Sheets Used in Waterproofing
D5847 Standard Practice for Writing Quality Control Specifications for Standard Test Methods for Water Analysis
D5849 Standard Test Method for Evaluating Resistance of Modified Bituminous Roofing Membrane to Cyclic Fatigue (Joint Displacement)
D5850 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
D5850 Standard Test Method for (Analytical Procedure) Determining Transmissivity, Storage Coefficient, and Anisotropy Ratio from a Network of Partially Penetrating Wells
D5851 Standard Guide for Planning and Implementing a Water Monitoring Program
D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
D5852 Standard Test Method for Erodibility Determination of Soil in the Field or in the Laboratory by the Jet Index Method
D5855 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
D5855 Standard Test Method for (Analytical Procedure) for Determining Transmissivity and Storage Coefficient of Confined Nonleaky or Leaky Aquifer by Constant Drawdown Method in Flowing Well
D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
D5856 Standard Test Method for Measurement of Hydraulic Conductivity of Porous Material Using a Rigid-Wall, Compaction-Mold Permeameter
D5858 Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
D5865 Standard Test Method for Gross Calorific Value of Coal and Coke
D5869 Standard Practice for Dark Oven Heat Exposure of Roofing and Waterproofing Materials
D5872 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5872 Standard Guide for Use of Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
D5873 Standard Test Method for Determination of Rock Hardness by Rebound Hammer Method
D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil
D5874 Standard Test Method for Determination of the Impact Value (IV) of a Soil
D5875 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5875 Standard Guide for Use of Cable-Tool Drilling and Sampling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5876 Standard Guide for Use of Direct Rotary Wireline Casing Advancement Drilling Methods for Geoenvironmental Exploration and Installation of Subsurface Water-Quality Monitoring Devices
D5877 Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams Based on Data Analytical Calculations
D5877 Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams Based on Data Analytical Calculations
D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D5878 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems
D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems
D5879 Standard Practice for Surface Site Characterization for On-Site Septic Systems
D5880 Standard Guide for Subsurface Flow and Transport Modeling
D5880 Standard Guide for Subsurface Flow and Transport Modeling
D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5881 Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
D5882 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations
D5883 Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
D5884 Standard Test Method for Determining Tearing Strength of Internally Reinforced Geomembranes
D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
D5885 Standard Test Method for Oxidative Induction Time of Polyolefin Geosynthetics by High-Pressure Differential Scanning Calorimetry
D5886 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
D5886 Standard Guide for Selection of Test Methods to Determine Rate of Fluid Permeation Through Geomembranes for Specific Applications
D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
D5887 Standard Test Method for Measurement of Index Flux Through Saturated Geosynthetic Clay Liner Specimens Using a Flexible Wall Permeameter
D5888 Standard Guide for Storage and Handling of Geosynthetic Clay Liners
D5888 Standard Guide for Storage and Handling of Geosynthetic Clay Liners
D5889 Standard Practice for Quality Control of Geosynthetic Clay Liners
D5889 Standard Practice for Quality Control of Geosynthetic Clay Liners
D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
D5890 Standard Test Method for Swell Index of Clay Mineral Component of Geosynthetic Clay Liners
D5891 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
D5891 Standard Test Method for Fluid Loss of Clay Component of Geosynthetic Clay Liners
D5893/D5893M Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
D5898 Standard Guide for Standard Details for Adhered Sheet Waterproofing
D5903 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
D5903 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
D5910 Standard Test Method for Determination of Free Formaldehyde in Emulsion Polymers by Liquid Chromatography
D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
D5911/D5911M Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
D5912 Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
D5912 Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5918 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5920 Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5920 Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
D5921 Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
D5922 Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5923 Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5924 Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5926 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
D5933 Standard Specification for 2 5/8-in. and 4-in. Diameter Metal Shear Plates for Use in Wood Constructions
D5950 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
D5957 Standard Guide for Flood Testing Horizontal Waterproofing Installations
D5970 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure
D5970 Standard Test Method for Deterioration of Geotextiles from Outdoor Exposure
D5971 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
D5971 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material
D5973 Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
D5977 Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures
D5978 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
D5978 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
D5979 Standard Guide for Conceptualization and Characterization of Groundwater Systems
D5979 Standard Guide for Conceptualization and Characterization of Groundwater Systems
D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
D5980 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
D5981 Standard Guide for Calibrating a Groundwater Flow Model Application
D5981 Standard Guide for Calibrating a Groundwater Flow Model Application
D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
D5982 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners
D5993 Standard Test Method for Measuring Mass Per Unit of Geosynthetic Clay Liners
D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
D5994 Standard Test Method for Measuring Core Thickness of Textured Geomembrane
D5995 Standard Guide for Environmental Site Characterization in Cold Regions
D5995 Standard Guide for Environmental Site Characterization in Cold Regions
D5995 Standard Guide for Environmental Site Characterization in Cold Regions
D6000 Standard Guide for Presentation of Water-Level Information from Groundwater Sites
D6000 Standard Guide for Presentation of Water-Level Information from Groundwater Sites
D6001 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
D6001 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
D6006 Standard Guide for Assessing Biodegradability of Hydraulic Fluids
D6007 Standard Test Method for Determining Formaldehyde Concentration in Air from Wood Products Using a Small Scale Chamber
D6023 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
D6023 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
D6024 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
D6025 Standard Guide for Developing and Evaluating Groundwater Modeling Codes
D6025 Standard Guide for Developing and Evaluating Groundwater Modeling Codes
D6026 Standard Practice for Using Significant Digits in Geotechnical Data
D6027 Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6027 Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6028 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6029 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6030 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
D6030 Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability
D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6031/D6031M Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6032 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6033 Standard Guide for Describing the Functionality of a Groundwater Modeling Code
D6033 Standard Guide for Describing the Functionality of a Groundwater Modeling Code
D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6034 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
D6035 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
D6036 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps
D6036 Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps
D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6066 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6067 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
D6067 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
D6072/D6072M Standard Practice for Obtaining Samples of Geosynthetic Clay Liners
D6072/D6072M Standard Practice for Obtaining Samples of Geosynthetic Clay Liners
D6083 Standard Specification for Liquid Applied Acrylic Coating Used in Roofing
D6084 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
D6087 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
D6088 Standard Practice for Installation of Geocomposite Pavement Drains
D6088 Standard Practice for Installation of Geocomposite Pavement Drains
D6089 Standard Guide for Documenting a Groundwater Sampling Event
D6089 Standard Guide for Documenting a Groundwater Sampling Event
D6091 Standard Practice for 99 %/95 % Interlaboratory Detection Estimate (IDE) for Analytical Methods with Negligible Calibration Error
D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
D6092 Standard Practice for Specifying Standard Sizes of Stone for Erosion Control
D6098 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
D6102 Standard Guide for Installation of Geosynthetic Clay Liners
D6102 Standard Guide for Installation of Geosynthetic Clay Liners
D6103 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
D6103 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
D6104 Standard Practice for Determining the Performance of Oil/Water Separators Subjected to Surface Run-Off
D6106 Standard Guide for Establishing Nomenclature of Groundwater Aquifers
D6106 Standard Guide for Establishing Nomenclature of Groundwater Aquifers
D6108 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes
D6109 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
D6110 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
D6111 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement
D6112 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
D6114/D6114M Standard Specification for Asphalt-Rubber Binder
D6117 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes
D6128 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
D6134 Standard Specification for Vulcanized Rubber Sheets Used in Waterproofing Systems
D6135 Standard Practice for Application of Self-Adhering Modified Bituminous Waterproofing
D6136 Standard Test Method for Kerosene Number of Unsaturated (Dry) Felt by the Vacuum Method
D6140 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
D6140 Standard Test Method to Determine Asphalt Retention of Paving Fabrics Used in Asphalt Paving for Full-Width Applications
D6141 Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
D6141 Standard Guide for Screening Clay Portion of Geosynthetic Clay Liner (GCL) for Chemical Compatibility to Liquids
D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6151 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6152/D6152M Standard Specification for SEBS-Modified Mopping Asphalt Used in Roofing
D6153 Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems
D6154 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
D6155 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
D6162 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
D6163 Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Glass Fiber Reinforcements
D6164/D6164M Standard Specification for Styrene Butadiene Styrene (SBS) Modified Bituminous Sheet Materials Using Polyester Reinforcements
D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6167 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
D6168 Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
D6169 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
D6169 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
D6170 Standard Guide for Selecting a Groundwater Modeling Code
D6170 Standard Guide for Selecting a Groundwater Modeling Code
D6171 Standard Guide for Documenting a Groundwater Modeling Code
D6171 Standard Guide for Documenting a Groundwater Modeling Code
D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
D6187 Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
D6213 Standard Practice for Tests to Evaluate the Chemical Resistance of Geogrids to Liquids
D6214 Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
D6214 Standard Test Method for Determining the Integrity of Field Seams Used in Joining Geomembranes by Chemical Fusion Methods
D6221 Standard Specification for Reinforced Bituminous Flashing Sheets for Roofing and Waterproofing
D6222/D6222M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using Polyester Reinforcements
D6223/D6223M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Sheet Materials Using a Combination of Polyester and Glass Fiber Reinforcements
D6225 Standard Test Method for Granule Cover of Mineral Surfaced Roofing
D6226 Standard Test Method for Open Cell Content of Rigid Cellular Plastics
D6228 Standard Test Method for Determination of Sulfur Compounds in Natural Gas and Gaseous Fuels by Gas Chromatography and Flame Photometric Detection
D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6230 Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
D6235 Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites
D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil
D6236 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil
D6237 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
D6241 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
D6241 Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
D6243 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
D6243 Standard Test Method for Determining the Internal and Interface Shear Resistance of Geosynthetic Clay Liner by the Direct Shear Method
D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
D6244 Standard Test Method for Vertical Compression of Geocomposite Pavement Panel Drains
D6245 Standard Guide for Using Indoor Carbon Dioxide Concentrations to Evaluate Indoor Air Quality and Ventilation
D6249 Standard Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals
D6259 Standard Practice for Determination of a Pooled Limit of Quantitation
D6261 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
D6270 Standard Practice for Use of Scrap Tires in Civil Engineering Applications
D6274 Standard Guide for Conducting Borehole Geophysical Logging - Gamma
D6274 Standard Guide for Conducting Borehole Geophysical Logging - Gamma
D6274 Standard Guide for Conducting Borehole Geophysical Logging - Gamma
D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
D6276 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
D6282 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
D6282 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
D6285 Standard Guide for Locating Abandoned Wells
D6285 Standard Guide for Locating Abandoned Wells
D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
D6286 Standard Guide for Selection of Drilling Methods for Environmental Site Characterization
D6294/D6294M Standard Test Method for Corrosion Resistance of Ferrous Metal Fastener Assemblies Used in Roofing and Waterproofing
D6297 Standard Specification for Asphaltic Plug Joints for Bridges
D6298 Standard Specification for Fiberglass Reinforced Styrene-Butadiene-Styrene (SBS) Modified Bituminous Sheets with a Factory Applied Metal Surface
D6299 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance
D6300 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants
D6305 Standard Practice for Calculating Bending Strength Design Adjustment Factors for Fire-Retardant-Treated Plywood Roof Sheathing
D6307 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
D6312 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
D6312 Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs
D6329 Standard Guide for Developing Methodology for Evaluating the Ability of Indoor Materials to Support Microbial Growth Using Static Environmental Chambers
D6330 Standard Practice for Determination of Volatile Organic Compounds (Excluding Formaldehyde) Emissions from Wood-Based Panels Using Small Environmental Chambers Under Defined Test Conditions
D6345 Standard Guide for Selection of Methods for Active, Integrative Sampling of Volatile Organic Compounds in Air
D6356/D6356M Standard Test Method for Hydrogen Gas Generation of Aluminum Emulsified Asphalt Used as a Protective Coating for Roofing
D6364 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
D6364 Standard Test Method for Determining Short-Term Compression Behavior of Geosynthetics
D6365 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
D6365 Standard Practice for the Nondestructive Testing of Geomembrane Seams using the Spark Test
D6369 Standard Guide for Design of Standard Flashing Details for EPDM Roof Membranes
D6370 Standard Test Method for Rubber-Compositional Analysis by Thermogravimetry (TGA)
D6372 Standard Practice for Design, Testing, and Construction of Micro-Surfacing
D6373 Standard Specification for Performance Graded Asphalt Binder
D6380 Standard Specification for Asphalt Roll Roofing (Organic Felt)
D6381 Standard Test Method for Measurement of Asphalt Shingle Mechanical Uplift Resistance
D6382/D6382M Standard Practice for Dynamic Mechanical Analysis and Thermogravimetry of Roofing and Waterproofing Membrane Material
D6383/D6383M Standard Practice for Time-to-Failure (Creep-Rupture) of Adhesive Joints Fabricated from EPDM Roof Membrane Material
D6388 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
D6388 Standard Practice for Tests to Evaluate the Chemical Resistance of Geonets to Liquids
D6389 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
D6389 Standard Practice for Tests to Evaluate the Chemical Resistance of Geotextiles to Liquids
D6390 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
D6391 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration
D6392 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
D6392 Standard Test Method for Determining the Integrity of Nonreinforced Geomembrane Seams Produced Using Thermo-Fusion Methods
D6393 Standard Test Method for Bulk Solids Characterization by Carr Indices
D6400 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities
D6429 Standard Guide for Selecting Surface Geophysical Methods
D6429 Standard Guide for Selecting Surface Geophysical Methods
D6429 Standard Guide for Selecting Surface Geophysical Methods
D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation
D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation
D6430 Standard Guide for Using the Gravity Method for Subsurface Investigation
D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
D6431 Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6432 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6433 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys
D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
D6434 Standard Guide for the Selection of Test Methods for Flexible Polypropylene (fPP) Geomembranes
D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6449 Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6451 Standard Guide for Application of Asphalt Based Protection Board
D6452 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
D6452 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
D6454 Standard Test Method for Determining the Short-Term Compression Behavior of Turf Reinforcement Mats (TRMs)
D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
D6455 Standard Guide for the Selection of Test Methods for Prefabricated Bituminous Geomembranes (PBGM)
D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6459 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6460 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6461 Standard Specification for Silt Fence Materials
D6461 Standard Specification for Silt Fence Materials
D6462 Standard Practice for Silt Fence Installation
D6462 Standard Practice for Silt Fence Installation
D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6467 Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control
D6473 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control
D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
D6475 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
D6495 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
D6495 Standard Guide for Acceptance Testing Requirements for Geosynthetic Clay Liners
D6496 Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
D6496 Standard Test Method for Determining Average Bonding Peel Strength Between the Top and Bottom Layers of Needle-Punched Geosynthetic Clay Liners
D6497 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
D6497 Standard Guide for Mechanical Attachment of Geomembrane to Penetrations or Structures
D6506 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing
D6509/D6509M Standard Specification for Atactic Polypropylene (APP) Modified Bituminous Base Sheet Materials Using Glass Fiber Reinforcements
D6510 Standard Guide for Selection of Asphalt Used in Built-Up Roofing Systems
D6511/D6511M Standard Test Methods for Solvent Bearing Bituminous Compounds
D6512 Standard Practice for Interlaboratory Quantitation Estimate
D6513 Standard Practice for Calculating the Superimposed Load on Wood-frame Walls for Standard Fire-Resistance Tests
D6517 Standard Guide for Field Preservation of Groundwater Samples
D6517 Standard Guide for Field Preservation of Groundwater Samples
D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6519 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6521 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
D6523 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
D6523 Standard Guide for Evaluation and Selection of Alternative Daily Covers (ADCs) for Sanitary Landfills
D6524 Standard Test Method for Measuring the Resiliency of Turf Reinforcement Mats (TRMs)
D6525 Standard Test Method for Measuring Nominal Thickness of Permanent Rolled Erosion Control Products
D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
D6527 Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
D6528 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
D6532 Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
D6539 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
D6555 Standard Guide for Evaluating System Effects in Repetitive-Member Wood Assemblies
D6564 Standard Guide for Field Filtration of Groundwater Samples
D6564 Standard Guide for Field Filtration of Groundwater Samples
D6565 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
D6565 Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
D6566 Standard Test Method for Measuring Mass per Unit Area of Turf Reinforcement Mats
D6567 Standard Test Method for Measuring the Light Penetration of a Turf Reinforcement Mat (TRM)
D6570 Standard Practice for Assigning Allowable Properties for Mechanically Graded Lumber
D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
D6572 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
D6574 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
D6574 Standard Test Method for Determining the (In-Plane) Hydraulic Transmissivity of a Geosynthetic by Radial Flow
D6575 Standard Test Method for Determining Stiffness of Geosynthetics Used as Turf Reinforcement Mats (TRMs)
D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
D6598 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
D6599 Standard Practice for Construction of Live Fascines on Slopes
D6599 Standard Practice for Construction of Live Fascines on Slopes
D6600 Standard Practice for Evaluating Test Sensitivity for Rubber Test Methods
D6607 Standard Practice for Inclusion of Precision Statement Variation in Specification Limits
D6608 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
D6617 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material
D6622 Standard Guide for Application of Fully Adhered Hot-Applied Reinforced Waterproofing Systems
D6626 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
D6627/D6627M Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
D6628 Standard Specification for Color of Pavement Marking Materials
D6629 Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion
D6630 Standard Guide for Low Slope Insulated Roof Membrane Assembly Performance
D6631 Standard Guide for Committee D01 for Conducting an Interlaboratory Study for the Purpose of Determining the Precision of a Test Method
D6634 Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
D6634 Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells
D6635 Standard Test Method for Performing the Flat Plate Dilatometer
D6635 Standard Test Method for Performing the Flat Plate Dilatometer
D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
D6636 Standard Test Method for Determination of Ply Adhesion Strength of Reinforced Geomembranes
D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
D6637 Standard Test Method for Determining Tensile Properties of Geogrids by the Single or Multi-Rib Tensile Method
D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
D6638 Standard Test Method for Determining Connection Strength Between Geosynthetic Reinforcement and Segmental Concrete Units (Modular Concrete Blocks)
D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
D6639 Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
D6642 Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
D6643 Standard Test Method for Testing Wood-Base Panel Corner Impact Resistance
D6648 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
D6662 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards
D6670 Standard Practice for Full-Scale Chamber Determination of Volatile Organic Emissions from Indoor Materials/Products
D6674 Standard Guide for Proficiency Test Program for Fabrics
D6682 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
D6683 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
D6684 Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6685 Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6689 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
D6690 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
D6693 Standard Test Method for Determining Tensile Properties of Nonreinforced Polyethylene and Nonreinforced Flexible Polypropylene Geomembranes
D6694 Standard Specification for Liquid-Applied Silicone Coating Used in Spray Polyurethane Foam Roofing Systems
D6703 Standard Test Method for Automated Heithaus Titrimetry
D6704 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
D6705/D6705M Standard Guide for the Repair and Recoat of Sprayed Polyurethane Foam Roofing Systems
D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
D6706 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
D6707 Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
D6708 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material
D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6711 Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6712 Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
D6723 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
D6724 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
D6724 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6725 Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6726 Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction
D6726 Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction
D6726 Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction
D6727 Standard Guide for Conducting Borehole Geophysical Logging - Neutron
D6727 Standard Guide for Conducting Borehole Geophysical Logging - Neutron
D6727 Standard Guide for Conducting Borehole Geophysical Logging - Neutron
D6747 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes
D6747 Standard Guide for Selection of Techniques for Electrical Detection of Leaks in Geomembranes
D6751 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels
D6752/D6752M Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
D6753/D6753M Standard Specification for Coal Tar Adhesive
D6754/D6754M Standard Specification for Ketone Ethylene Ester Based Sheet Roofing
D6757 Standard Specification for Underlayment Felt Containing Inorganic Fibers Used in Steep-Slope Roofing
D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
D6758 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6760 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6765 Standard Practice for Live Staking
D6765 Standard Practice for Live Staking
D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
D6766 Standard Test Method for Evaluation of Hydraulic Properties of Geosynthetic Clay Liners Permeated with Potentially Incompatible Liquids
D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
D6767 Standard Test Method for Pore Size Characteristics of Geotextiles by Capillary Flow Test
D6768 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
D6768 Standard Test Method for Tensile Strength of Geosynthetic Clay Liners
D6769/D6769M Standard Guide for Application of Fully Adhered, Cold-Applied, Prefabricated Reinforced Modified Bituminous Membrane Waterproofing Systems
D6773 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester
D6780 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
D6780 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
D6782 Standard Test Methods for Standardization and Calibration of In-Line Dry Lumber Moisture Meters
D6792 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories
D6796 Standard Practice for Production of Coal, Coke and Coal Combustion Samples for Interlaboratory Studies
D6805 Standard Practice for Infrared (IR) Procedure for Determination of Aromatic/Aliphatic Ratio of Bituminous Emulsions
D6815 Standard Specification for Evaluation of Duration of Load and Creep Effects of Wood and Wood-Based Products
D6816 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
D6817 Standard Specification for Rigid Cellular Polystyrene Geofoam
D6817 Standard Specification for Rigid Cellular Polystyrene Geofoam
D6818 Standard Test Method for Ultimate Tensile Properties of Turf Reinforcement Mats
D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
D6820 Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
D6825 Standard Guide for Placement of Riprap Revetments
D6825 Standard Guide for Placement of Riprap Revetments
D6826 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
D6826 Standard Specification for Sprayed Slurries, Foams and Indigenous Materials Used As Alternative Daily Cover for Municipal Solid Waste Landfills
D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
D6836 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge
D6841 Standard Practice for Calculating Design Value Treatment Adjustment Factors for Fire-Retardant-Treated Lumber
D6857/D6857M Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
D6859 Standard Test Method for Pile Thickness of Finished Level Pile Yarn Floor Coverings
D6866 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
D6874 Standard Test Methods for Nondestructive Evaluation of Wood-Based Flexural Members Using Transverse Vibration
D6878/D6878M Standard Specification for Thermoplastic Polyolefin Based Sheet Roofing
D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6884 Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6886 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography
D6904 Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
D6910/D6910M Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6911 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6913 Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6914 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D6914 Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
D6916 Standard Test Method for Determining the Shear Strength Between Segmental Concrete Units (Modular Concrete Blocks)
D6917 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
D6917 Standard Guide for Selection of Test Methods for Prefabricated Vertical Drains (PVD)
D6918 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
D6918 Standard Test Method for Testing Vertical Strip Drains in the Crimped Condition
D6924 Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
D6925 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
D6926 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
D6927 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures
D6928 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
D6929 Standard Practice for Freezing of Emulsified Asphalts
D6930 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts
D6931 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
D6932/D6932M Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
D6933 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
D6934 Standard Test Method for Residue by Evaporation of Emulsified Asphalt
D6935 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt
D6936 Standard Test Method for Determining Demulsibility of Emulsified Asphalt
D6937 Standard Test Method for Determining Density of Emulsified Asphalt
D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D6938 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D6939 Standard Practice for Brushmattressing
D6939 Standard Practice for Brushmattressing
D6940 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
D6941 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders
D6945/D6945M Standard Specification for Emulsified Refined Coal-Tar (Ready to Use, Commercial Grade)
D6946 Standard Specification for Emulsified Refined Coal-Tar (Driveway Sealer, Ready to Use, Primarily Residential Grade)
D6947 Standard Specification for Liquid Applied Moisture Cured Polyurethane Coating Used in Spray Polyurethane Foam Roofing System
D6948/D6948M Standard Practice for Application of Refined Coal Tar (Ready to Use, Commercial Grade)
D6950 Standard Practice for Application of Heat Weldable Atactic Polypropylene (APP) Modified Bituminous Waterproofing Membranes Systems for New Building Decks
D6951/D6951M Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
D6958 Standard Test Methods for Evaluating Side-Bonding Potential of Wood Coatings
D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
D6992 Standard Test Method for Accelerated Tensile Creep and Creep-Rupture of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
D6995 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
D6997 Standard Test Method for Distillation of Emulsified Asphalt
D6998 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts
D6999 Standard Practice for Miscibility of Emulsified Asphalts
D7000 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
D7001 Standard Specification for Geocomposites for Pavement Edge Drains and Other High-Flow Applications
D7002 Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System
D7002 Standard Practice for Leak Location on Exposed Geomembranes Using the Water Puddle System
D7003 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
D7003 Standard Test Method for Strip Tensile Properties of Reinforced Geomembranes
D7004 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
D7004 Standard Test Method for Grab Tensile Properties of Reinforced Geomembranes
D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
D7005 Standard Test Method for Determining the Bond Strength (Ply Adhesion) of Geocomposites
D7006 Standard Practice for Ultrasonic Testing of Geomembranes
D7006 Standard Practice for Ultrasonic Testing of Geomembranes
D7007 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
D7007 Standard Practices for Electrical Methods for Locating Leaks in Geomembranes Covered with Water or Earth Materials
D7008 Standard Specification for Geosynthetic Alternate Daily Covers
D7008 Standard Specification for Geosynthetic Alternate Daily Covers
D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7012 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
D7013/D7013M Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges
D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7014 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
D7015 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
D7031 Standard Guide for Evaluating Mechanical and Physical Properties of Wood-Plastic Composite Products
D7032 Standard Specification for Establishing Performance Ratings for Wood-Plastic Composite Deck Boards and Guardrail Systems (Guards or Handrails)
D7033 Standard Practice for Establishing Design Capacities for Oriented Strand Board (OSB) Wood-Based Structural-Use Panels
D7045 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
D7045 Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
D7046 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration
D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier
D7047 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier
D7048 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7048 Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7051 Standard Test Method for Cyclic Thermal Shock of SBS-Modified Bituminous Roofing Sheets with Factory-Applied Metal Surface
D7053/D7053M Standard Guide for Determining and Evaluating Causes of Water Leakage of Low-Sloped Roofs
D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
D7056 Standard Test Method for Determining the Tensile Shear Strength of Pre-Fabricated Bituminous Geomembrane Seams
D7063/D7063M Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
D7064/D7064M Standard Practice for Open-Graded Friction Course (OGFC) Mix Design
D7067 Standard Specification for Reinforced White PIB Sheet Used in Roofing Membrane
D7069 Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
D7069 Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
D7070 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature
D7091 Standard Practice for Nondestructive Measurement of Dry Film Thickness of Nonmagnetic Coatings Applied to Ferrous Metals and Nonmagnetic, Nonconductive Coatings Applied to Non-Ferrous Metals
D7099 Standard Terminology Relating to Frozen Soil and Rock
D7099 Standard Terminology Relating to Frozen Soil and Rock
D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7100 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
D7101 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
D7105 Standard Test Method for Determining the Adhesive and Cohesive Strength Between Materials in Roofing or Waterproofing Membranes and Systems
D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
D7106 Standard Guide for Selection of Test Methods for Ethylene Propylene Diene Terpolymer (EPDM) Geomembranes
D7113/D7113M Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
D7115 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
D7116 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
D7119 Standard Guide for Sampling Spray Polyurethane Foam and Coating in Roofing
D7120/D7120M Standard Guide for Evaluation and Preparation of Roof Membranes for Coating Application
D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
D7128 Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
D7147 Standard Specification for Testing and Establishing Allowable Loads of Joist Hangers
D7158/D7158M Standard Test Method for Wind Resistance of Asphalt Shingles (Uplift Force/Uplift Resistance Method)
D7172 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
D7173 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
D7174 Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
D7175 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
D7176 Standard Specification for Non-Reinforced Polyvinyl Chloride (PVC) Geomembranes Used in Buried Applications
D7177 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
D7177 Standard Specification for Air Channel Evaluation of Polyvinyl Chloride (PVC) Dual Track Seamed Geomembranes
D7178 Standard Practice for Determining the Number of Constrictions m of Non-Woven Geotextiles as a Complementary Filtration Property
D7178 Standard Practice for Determining the Number of Constrictions m of Non-Woven Geotextiles as a Complementary Filtration Property
D7179 Standard Test Method for Determining Geonet Breaking Force
D7179 Standard Test Method for Determining Geonet Breaking Force
D7180 Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
D7180 Standard Guide for Use of Expanded Polystyrene (EPS) Geofoam in Geotechnical Projects
D7181 Method for Consolidated Drained Triaxial Compression Test for Soils
D7181 Method for Consolidated Drained Triaxial Compression Test for Soils
D7186 Standard Practice for Quality Assurance Observation of Roof Construction and Repair
D7196 Standard Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
D7199 Standard Practice for Establishing Characteristic Values for Reinforced Glued Laminated Timber (Glulam) Beams Using Mechanics-Based Models
D7207 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
D7207 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D7208 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D7226 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
D7227/D7227M Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
D7228 Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
D7229 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor
D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
D7238 Standard Test Method for Effect of Exposure of Unreinforced Polyolefin Geomembrane Using Fluorescent UV Condensation Apparatus
D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
D7239 Standard Specification for Hybrid Geosynthetic Paving Mat for Highway Applications
D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
D7240 Standard Practice for Leak Location using Geomembranes with an Insulating Layer in Intimate Contact with a Conductive Layer via Electrical Capacitance Technique (Conductive Geomembrane Spark Test)
D7242 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
D7242 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers
D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
D7243 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
D7254 Standard Specification for Polypropylene (PP) Siding
D7262 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
D7262 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
D7263 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
D7272 Standard Test Method for Determining the Integrity of Seams Used in Joining Geomembranes by Pre-manufactured Taped Methods
D7273 Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
D7273 Standard Guide for for Acceptance Testing Requirements for Geonets and Geonet Drainage Geocomposites
D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
D7274 Standard Test Method for Mineral Stabilizer Content of Prefabricated Bituminous Geomembranes (BGM)
D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)
D7275 Standard Test Method for Tensile Properties of Bituminous Geomembranes (BGM)
D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
D7276 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
D7277 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
D7281 Standard Test Method for Determining Water Migration Resistance Through Roof Membranes
D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
D7299 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe
D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
D7300 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
D7311/D7311M Standard Specification for Liquid-Applied, Single-Pack, Moisture-Triggered, Aliphatic Polyurethane Roofing Membrane
D7312 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
D7313 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
D7322 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
D7330 Standard Test Method for Assessment of Surface Appearance Change in Pile Floor Coverings Using Standard Reference Scales
D7341 Standard Practice for Establishing Characteristic Values for Flexural Properties of Structural Glued Laminated Timber by Full-Scale Testing
D7349/D7349M Standard Test Method for Determining the Capability of Roofing and Waterproofing Materials to Seal around Fasteners
D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
D7351 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
D7352 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
D7352 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
D7361 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
D7361 Standard Test Method for Accelerated Compressive Creep of Geosynthetic Materials Based on Time-Temperature Superposition Using the Stepped Isothermal Method
D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
D7367 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
D7369 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
D7370 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
D7372 Standard Guide for Analysis and Interpretation of Proficiency Test Program Results
D7374 Standard Practice for Evaluating Elevated Temperature Performance of Adhesives Used in End-Jointed Lumber
D7379 Standard Test Methods for Strength of Modified Bitumen Sheet Material Laps Using Cold Process Adhesive
D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
D7380 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
D7381 Standard Practice for Establishing Allowable Stresses for Round Timbers for Piles from Tests of Full-Size Material
D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
D7382 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
D7383 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
D7384 Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary
D7384 Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary
D7384 Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary
D7400 Standard Test Methods for Downhole Seismic Testing
D7400 Standard Test Methods for Downhole Seismic Testing
D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
D7401 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
D7402 Standard Practice for Identifying Cationic Emulsified Asphalts
D7403 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
D7404 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
D7405 Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
D7406 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
D7406 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
D7407 Standard Guide for Determining The Transmission of Gases Through Geomembranes
D7407 Standard Guide for Determining The Transmission of Gases Through Geomembranes
D7408 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
D7408 Standard Specification for Non Reinforced PVC (Polyvinyl Chloride) Geomembrane Seams
D7409 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
D7409 Standard Test Method for Carboxyl End Group Content of Polyethylene Terephthalate (PET) Yarns
D7425/D7425M Standard Specification for Spray Polyurethane Foam Used for Roofing Applications
D7428 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
D7433 Standard Test Method for Measuring Surface Water Absorption of Overlaid Wood-Based Panels
D7438 Standard Practice for Field Calibration and Application of Hand-Held Moisture Meters
D7443 Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents
D7443 Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents
D7443 Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents
D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
D7458 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
D7460 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
D7465 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
D7465 Standard Specification for Ethylene Propylene Diene Terpolymer (EPDM) Sheet Used In Geomembrane Applications
D7466 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
D7466 Standard Test Method for Measuring the Asperity Height of Textured Geomembrane
D7467 Standard Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
D7469 Standard Test Methods for End-Joints in Structural Wood Products
D7470 Standard Practice for Evaluating Elevated Temperature Performance of End-Jointed Lumber Studs
D7480 Standard Guide for Evaluating the Attributes of a Forest Management Plan
D7481 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
D7492/D7492M Standard Guide for Use of Drainage System Media with Waterproofing Systems
D7496 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
D7497 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique
D7498 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test
D7498 Standard Test Method for Vertical Strip Drains Using a Large Scale Consolidation Test
D7499/D7499M Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
D7499/D7499M Standard Test Method for Measuring Geosynthetic-Soil Resilient Interface Shear Stiffness
D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
D7503 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
D7505/D7505M Standard Specification for Self-Adhesive Polyester Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
D7519 Standard Test Method for Internal Bond Strength and Thickness Swell of Cellulosic-Based Fiber and Particle Panels After Repeated Wetting
D7530/D7530M Standard Specification for Self-Adhesive Glass Fiber Fabric Reinforced Polymer Modified Asphalt Steep Slope Roll Roofing Surfaced with Mineral Granules
D7533/D7533M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area
D7533/D7533M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area
D7533/D7533M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area
D7534/D7534M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit
D7534/D7534M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit
D7534/D7534M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit
D7552 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
D7553 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
D7556 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
D7556 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
D7557 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
D7557 Standard Practice for Sampling of Expanded Polystyrene Geofoam Specimens
D7564/D7564M Standard Practice for Construction of Asphalt-Rubber Cape Seal
D7585/D7585M Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
D7586/D7586M Standard Test Method for Quantification of Air Intrusion in Low-Sloped Mechanically Attached Membrane Roof Assemblies
D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
D7608 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
D7609/D7609M Standard Practice for Minimum Geospatial Data for an Abandoned Mine Land Project Site
D7610/D7610M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Keyword Feature
D7612 Standard Practice for Categorizing Wood and Wood-Based Products According to Their Fiber Sources
D7613 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
D7613 Standard Specification for Flexible Polypropylene Reinforced (fPP-R) and Nonreinforced (fPP) Geomembranes
D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
D7625 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
D7626 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
D7626 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay
D7627 Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine
D7627 Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine
D7627 Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine
D7628 Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas
D7628 Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas
D7628 Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas
D7629/D7629M Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features
D7629/D7629M Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features
D7629/D7629M Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features
D7630/D7630M Standard Practice for Minimum Geospatial Data for Postmining Land Uses
D7630/D7630M Standard Practice for Minimum Geospatial Data for Postmining Land Uses
D7630/D7630M Standard Practice for Minimum Geospatial Data for Postmining Land Uses
D7631 Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location
D7631 Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location
D7631 Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location
D7635/D7635M Standard Test Method for Measurement of Thickness of Coatings Over Fabric Reinforcement
D7636/D7636M Standard Practice for Sampling and Analysis of Modified Bitumen Roof Systems
D7643 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
D7648 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
D7648 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
D7654/D7654M Standard Specification for Asphalt Used in Roofing Measured by Dynamic Shear Rheometer
D7655/D7655M Standard Classification for Size of Aggregate Used as Ballast for Membrane Roof Systems
D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
D7663 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations
D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
D7664 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils
D7672 Standard Specification for Evaluating Structural Capacities of Rim Board Products and Assemblies
D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
D7698 Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method
D7699/D7699M Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites
D7700 Standard Guide for Selecting Test Methods for Geomembrane Seams
D7700 Standard Guide for Selecting Test Methods for Geomembrane Seams
D7701 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
D7701 Standard Test Method for Determining the Flow Rate of Water and Suspended Solids from a Geotextile Bag
D7702 Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
D7702 Standard Guide for Considerations When Evaluating Direct Shear Results Involving Geosynthetics
D7703 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System
D7703 Standard Practice for Electrical Leak Location on Exposed Geomembranes Using the Water Lance System
D7737 Standard Test Method for Individual Geogrid Junction Strength
D7737 Standard Test Method for Individual Geogrid Junction Strength
D7741/D7741M Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer
D7746 Standard Practice for Calculating the Superimposed Load on Wood-frame Floor-Ceiling Assemblies for Standard Fire-Resistance Tests
D7747 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
D7747 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Strip Tensile Method
D7748 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
D7748 Standard Test Method for Flexural Rigidity of Geogrids, Geotextiles and Related Products
D7749 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
D7749 Standard Test Method for Determining Integrity of Seams Produced Using Thermo-Fusion Methods for Reinforced Geomembranes by the Grab Method
D7758 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
D7758 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations
D7759 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
D7759 Standard Guide for Nuclear Surface Moisture and Density Gauge Calibration
D7762 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
D7762 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash
D7780 Standard Practice for Geospatial Data for Representing Coal Mining Features
D7780 Standard Practice for Geospatial Data for Representing Coal Mining Features
D7780 Standard Practice for Geospatial Data for Representing Coal Mining Features
E1 Standard Specification for ASTM Liquid-in-Glass Thermometers
E3 Standard Guide for Preparation of Metallographic Specimens
E4 Standard Practices for Force Verification of Testing Machines
E11 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
E23 Standard Test Methods for Notched Bar Impact Testing of Metallic Materials
E28 Standard Test Methods for Softening Point of Resins Derived from Naval Stores by Ring-and-Ball Apparatus
E29 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
E69 Standard Test Method for Combustible Properties of Treated Wood by the Fire-Tube Apparatus
E70 Standard Test Method for pH of Aqueous Solutions With the Glass Electrode
E72 Standard Test Methods of Conducting Strength Tests of Panels for Building Construction
E73 Standard Practice for Static Load Testing of Truss Assemblies
E77 Standard Test Method for Inspection and Verification of Thermometers
E84 Standard Test Method for Surface Burning Characteristics of Building Materials
E90 Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
E94 Standard Guide for Radiographic Examination
E96/E96M Standard Test Methods for Water Vapor Transmission of Materials
E102/E102M Standard Test Method for Saybolt Furol Viscosity of Bituminous Materials at High Temperatures
E105 Standard Practice for Probability Sampling Of Materials
E108 Standard Test Methods for Fire Tests of Roof Coverings
E110 Standard Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
E111 Standard Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
E119 Standard Test Methods for Fire Tests of Building Construction and Materials
E122 Standard Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
E136 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C
E140 Standard Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
E141 Standard Practice for Acceptance of Evidence Based on the Results of Probability Sampling
E145 Standard Specification for Gravity-Convection and Forced-Ventilation Ovens
E154 Standard Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E162 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E164 Standard Practice for Contact Ultrasonic Testing of Weldments
E165 Standard Practice for Liquid Penetrant Examination for General Industry
E176 Standard Terminology of Fire Standards
E177 Standard Practice for Use of the Terms Precision and Bias in ASTM Test Methods
E178 Standard Practice for Dealing With Outlying Observations
E186 Standard Reference Radiographs for Heavy-Walled (2 to 4½-in. (50.8 to 114-mm)) Steel Castings
E196 Standard Practice for Gravity Load Testing of Floors and Low Slope Roofs
E230/E230M Standard Specification and Temperature-Electromotive Force (emf) Tables for Standardized Thermocouples
E241 Standard Guide for Limiting Water-Induced Damage to Buildings
E274/E274M Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
E283 Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E303 Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
E308 Standard Practice for Computing the Colors of Objects by Using the CIE System
E309 Standard Practice for Eddy-Current Examination of Steel Tubular Products Using Magnetic Saturation
E313 Standard Practice for Calculating Yellowness and Whiteness Indices from Instrumentally Measured Color Coordinates
E328 Standard Test Methods for Stress Relaxation Tests for Materials and Structures
E329 Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection
E330 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E331 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E336 Standard Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
E405 Standard Test Methods for Wear Testing Rotary Operators for Windows
E408 Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E413 Classification for Rating Sound Insulation
E445/E445M Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
E455 Standard Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E456 Standard Terminology Relating to Quality and Statistics
E477 Standard Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
E478 Standard Test Methods for Chemical Analysis of Copper Alloys
E488/E488M Standard Test Methods for Strength of Anchors in Concrete Elements
E492 Standard Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
E501 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
E514/E514M Standard Test Method for Water Penetration and Leakage Through Masonry
E518/E518M Standard Test Methods for Flexural Bond Strength of Masonry
E519/E519M Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
E524 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
E529 Standard Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E535 Standard Practice for Preparation of Fire-Test-Response Standards
E543 Standard Specification for Agencies Performing Nondestructive Testing
E546 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units
E547 Standard Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E556/E556M Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
E557 Standard Guide for Architectural Design and Installation Practices for Sound Isolation between Spaces Separated by Operable Partitions
E564 Standard Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E575 Standard Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E576 Standard Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
E580/E580M Standard Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
E595 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
E596 Standard Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
E603 Standard Guide for Room Fire Experiments
E605 Standard Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E631 Standard Terminology of Building Constructions
E648 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E659 Standard Test Method for Autoignition Temperature of Liquid Chemicals
E660 Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
E661 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E662 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E670 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter
E681 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
E683 Standard Practice for Installation and Service of Solar Space Heating Systems for One- and Two-Family Dwellings
E691 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
E695 Standard Method for Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E699 Standard Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
E709 Standard Guide for Magnetic Particle Testing
E736 Standard Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E739 Standard Practice for Statistical Analysis of Linear or Linearized Stress-Life (S-N) and Strain-Life (ε-N) Fatigue Data
E741 Standard Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E747 Standard Practice for Design, Manufacture and Material Grouping Classification of Wire Image Quality Indicators (IQI) Used for Radiology
E754 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E756 Standard Test Method for Measuring Vibration-Damping Properties of Materials
E759 Standard Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E760 Standard Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E761 Standard Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E779 Standard Test Method for Determining Air Leakage Rate by Fan Pressurization
E781 Standard Practice for Evaluating Absorptive Solar Receiver Materials When Exposed to Conditions Simulating Stagnation in Solar Collectors With Cover Plates
E782 Standard Practice for Exposure of Cover Materials for Solar Collectors to Natural Weathering Under Conditions Simulating Operational Mode
E783 Standard Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E795 Standard Practices for Mounting Test Specimens During Sound Absorption Tests
E799 Standard Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
E800 Standard Guide for Measurement of Gases Present or Generated During Fires
E814 Standard Test Method for Fire Tests of Penetration Firestop Systems
E831 Standard Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
E833 Standard Terminology of Building Economics
E859 Standard Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E864 Standard Practice for Surface Preparation of Aluminum Alloys to be Adhesively Bonded in Honeycomb Shelter Panels
E865 Standard Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E866 Standard Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E867 Standard Terminology Relating to Vehicle-Pavement Systems
E873 Standard Test Method for Bulk Density of Densified Particulate Biomass Fuels
E874 Standard Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E881 Standard Practice for Exposure of Solar Collector Cover Materials to Natural Weathering Under Conditions Simulating Stagnation Mode
E882 Standard Guide for Accountability and Quality Control in the Chemical Analysis Laboratory
E894 Standard Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E906/E906M Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
E907 Standard Test Method for Field Testing Uplift Resistance of Adhered Membrane Roofing Systems
E917 Standard Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E927 Standard Specification for Solar Simulation for Terrestrial Photovoltaic Testing
E935 Standard Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E936 Standard Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
E937 Standard Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E948 Standard Test Method for Electrical Performance of Photovoltaic Cells Using Reference Cells Under Simulated Sunlight
E950/E950M Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
E964 Standard Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E965 Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
E966 Standard Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
E970 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
E985 Standard Specification for Permanent Metal Railing Systems and Rails for Buildings
E987 Standard Test Methods for Deglazing Force of Fenestration Products
E989 Standard Classification for Determination of Impact Insulation Class (IIC)
E990 Standard Specification for Core-Splice Adhesive for Honeycomb Sandwich Shelter Panels
E997 Standard Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E998 Standard Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
E1007 Standard Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
E1014 Standard Guide for Measurement of Outdoor A-Weighted Sound Levels
E1021 Standard Test Method for Spectral Responsivity Measurements of Photovoltaic Devices
E1025 Standard Practice for Design, Manufacture, and Material Grouping Classification of Hole-Type Image Quality Indicators (IQI) Used for Radiology
E1032 Standard Test Method for Radiographic Examination of Weldments
E1036 Standard Test Methods for Electrical Performance of Nonconcentrator Terrestrial Photovoltaic Modules and Arrays Using Reference Cells
E1038 Standard Test Method for Determining Resistance of Photovoltaic Modules to Hail by Impact with Propelled Ice Balls
E1040 Standard Specification for Physical Characteristics of Nonconcentrator Terrestrial Photovoltaic Reference Cells
E1042 Standard Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
E1050 Standard Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
E1057 Standard Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074 Standard Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1082 Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
E1091 Standard Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1105 Standard Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1110 Standard Classification for Determination of Articulation Class
E1111 Standard Test Method for Measuring the Interzone Attenuation of Open Office Components
E1121 Standard Practice for Measuring Payback for Investments in Buildings and Building Systems
E1123 Standard Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
E1124 Standard Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
E1130 Standard Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
E1131 Standard Test Method for Compositional Analysis by Thermogravimetry
E1136 Standard Specification for P195/75R14 Radial Standard Reference Test Tire
E1142 Standard Terminology Relating to Thermophysical Properties
E1155 Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers
E1155M Standard Test Method for Determining FF Floor Flatness and FL Floor Levelness Numbers [Metric]
E1166 Standard Guide for Network Level Pavement Management
E1169 Standard Practice for Conducting Ruggedness Tests
E1170 Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
E1171 Standard Test Methods for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
E1179 Standard Specification for Sound Sources Used for Testing Open Office Components and Systems
E1185 Standard Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186 Standard Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1190 Standard Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1215 Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
E1222 Standard Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
E1233 Standard Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1252 Standard Practice for General Techniques for Obtaining Infrared Spectra for Qualitative Analysis
E1258 Standard Test Method for Airflow Calibration of Fan Pressurization Devices
E1264 Standard Classification for Acoustical Ceiling Products
E1265 Standard Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
E1274 Standard Test Method for Measuring Pavement Roughness Using a Profilograph
E1289 Standard Specification for Reference Specimen for Sound Transmission Loss
E1300 Standard Practice for Determining Load Resistance of Glass in Buildings
E1307 Standard Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1317 Standard Test Method for Flammability of Marine Surface Finishes
E1318 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods
E1321 Standard Test Method for Determining Material Ignition and Flame Spread Properties
E1323 Standard Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
E1325 Standard Terminology Relating to Design of Experiments
E1329 Standard Practice for Verification and Use of Control Charts in Spectrochemical Analysis
E1332 Standard Classification for Rating Outdoor-Indoor Sound Attenuation
E1333 Standard Test Method for Determining Formaldehyde Concentrations in Air and Emission Rates from Wood Products Using a Large Chamber
E1334 Standard Practice for Rating the Serviceability of a Building or Building-Related Facility
E1337 Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
E1345 Standard Practice for Reducing the Effect of Variability of Color Measurement by Use of Multiple Measurements
E1349 Standard Test Method for Reflectance Factor and Color by Spectrophotometry Using Bidirectional (45:0 or 0:45) Geometry
E1352 Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
E1353 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
E1354 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E1355 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E1356 Standard Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
E1362 Standard Test Method for Calibration of Non-Concentrator Photovoltaic Secondary Reference Cells
E1364 Standard Test Method for Measuring Road Roughness by Static Level Method
E1368 Standard Practice for Visual Inspection of Asbestos Abatement Projects
E1369 Standard Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1374 Standard Guide for Open Office Acoustics and Applicable ASTM Standards
E1399 Standard Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1402 Standard Terminology Relating to Sampling
E1410 Standard Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1414/E1414M Standard Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
E1423 Standard Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424 Standard Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425 Standard Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
E1444/E1444M Standard Practice for Magnetic Particle Testing
E1448/E1448M Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
E1462 Standard Test Methods for Insulation Integrity and Ground Path Continuity of Photovoltaic Modules
E1464 Standard Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
E1465 Standard Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
E1474 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1477 Standard Test Method for Luminous Reflectance Factor of Acoustical Materials by Use of Integrating-Sphere Reflectometers
E1480 Standard Terminology of Facility Management (Building-Related)
E1481 Standard Terminology of Railing Systems and Rails for Buildings
E1486 Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M Standard Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria [Metric]
E1488 Standard Guide for Statistical Procedures to Use in Developing and Applying Test Methods
E1489 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
E1494 Standard Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
E1503 Standard Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
E1509 Standard Specification for Room Heaters, Pellet Fuel-Burning Type
E1512 Standard Test Methods for Testing Bond Performance of Bonded Anchors
E1513 Standard Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514 Standard Specification for Structural Standing Seam Steel Roof Panel Systems
E1527 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
E1527 Standard Practice for Environmental Site Assessments: Phase I Environmental Site Assessment Process
E1529 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
E1537 Standard Test Method for Fire Testing of Upholstered Furniture
E1546 Standard Guide for Development of Fire-Hazard-Assessment Standards
E1551 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
E1554 Standard Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
E1555 Standard Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556 Standard Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557 Standard Classification for Building Elements and Related Sitework-UNIFORMAT II
E1573 Standard Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
E1574 Standard Test Method for Measurement of Sound in Residential Spaces
E1590 Standard Test Method for Fire Testing of Mattresses
E1591 Standard Guide for Obtaining Data for Deterministic Fire Models
E1592 Standard Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1597 Standard Test Method for Saltwater Pressure Immersion and Temperature Testing of Photovoltaic Modules for Marine Environments
E1602 Standard Guide for Construction of Solid Fuel Burning Masonry Heaters
E1605 Standard Terminology Relating to Lead in Buildings
E1612 Standard Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1613 Standard Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1623 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
E1637 Standard Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1643 Standard Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1644 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645 Standard Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1646 Standard Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1656/E1656M Standard Guide for Classification of Automated Pavement Condition Survey Equipment
E1660 Standard Classification for Serviceability of an Office Facility for Support for Office Work
E1661 Standard Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662 Standard Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663 Standard Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664 Standard Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665 Standard Classification for Serviceability of an Office Facility for Facility Protection
E1666 Standard Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667 Standard Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668 Standard Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669 Standard Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670 Standard Classification for Serviceability of an Office Facility for Management of Operations and Maintenance
E1671 Standard Classification for Serviceability of an Office Facility for Cleanliness
E1677 Standard Specification for Air Barrier (AB) Material or System for Low-Rise Framed Building Walls
E1678 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
E1679 Standard Practice for Setting the Requirements for the Serviceability of a Building or Building-Related Facility
E1680 Standard Test Method for Rate of Air Leakage Through Exterior Metal Roof Panel Systems
E1686 Standard Guide for Applying Environmental Noise Measurement Methods and Criteria
E1690 Standard Test Method for Determination of Ethanol Extractives in Biomass
E1692 Standard Classification for Serviceability of an Office Facility for Change and Churn by Occupants
E1693 Standard Classification for Serviceability of an Office Facility for Protection of Occupant Assets
E1694 Standard Classification for Serviceability of an Office Facility for Special Facilities and Technologies
E1699 Standard Practice for Performing Value Analysis (VA) of Buildings and Building Systems and Other Constructed Projects
E1700 Standard Classification for Serviceability of an Office Facility for Structure and Building Envelope
E1701 Standard Classification for Serviceability of an Office Facility for Manageability
E1703/E1703M Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
E1704 Standard Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
E1721 Standard Test Method for Determination of Acid-Insoluble Residue in Biomass
E1725 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
E1726 Standard Practice for Preparation of Soil Samples by Hotplate Digestion for Subsequent Lead Analysis
E1727 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
E1728 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
E1729 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
E1730 Standard Specification for Rigid Foam for Use in Structural Sandwich Panel Cores
E1740 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
E1745 Standard Specification for Plastic Water Vapor Retarders Used in Contact with Soil or Granular Fill under Concrete Slabs
E1748 Standard Test Method for Evaluating the Engagement Between Windows and Insect Screens as an Integral System
E1749 Standard Terminology Relating to Rigid Wall Relocatable Shelters
E1753 Standard Practice for Use of Qualitative Chemical Spot Test Kits for Detection of Lead in Dry Paint Films
E1755 Standard Test Method for Ash in Biomass
E1758 Standard Test Method for Determination of Carbohydrates in Biomass by High Performance Liquid Chromatography
E1763 Standard Guide for Interpretation and Use of Results from Interlaboratory Testing of Chemical Analysis Methods
E1765 Standard Practice for Applying Analytical Hierarchy Process (AHP) to Multiattribute Decision Analysis of Investments Related to Buildings and Building Systems
E1773 Standard Practice for Sealing Rigid Wall Tactical Shelters with Polysulfide Based Sealants
E1775 Standard Guide for Evaluating Performance of On-Site Extraction and Field-Portable Electrochemical or Spectrophotometric Analysis for Lead
E1776 Standard Guide for Development of Fire-Risk-Assessment Standards
E1777 Standard Guide for Prioritization of Data Needs for Pavement Management
E1778 Standard Terminology Relating to Pavement Distress
E1779 Standard Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
E1780 Standard Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
E1783 Standard Specification for Preformed Architectural Strip Seals for Buildings and Parking Structures
E1792 Standard Specification for Wipe Sampling Materials for Lead in Surface Dust
E1793 Standard Practice for Preparation of Aluminum Alloy for Bonding in Foam and Beam Type Transportable Shelters
E1794 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (200°F Elevated Humidity Service), Type II Panels
E1795 Standard Specification for Non-Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1796 Standard Guide for Selection and Use of Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1797 Standard Specification for Reinforced Liquid Coating Encapsulation Products for Leaded Paint in Buildings
E1799 Standard Practice for Visual Inspections of Photovoltaic Modules
E1800 Standard Specification for Adhesive for Bonding Foam Cored Sandwich Panels (160°F Elevated Humidity Service), Type I Panels
E1801 Standard Practice for Adhesive Bonding of Aluminum Facings in Foam and Beam Type Shelters
E1802 Standard Test Methods for Wet Insulation Integrity Testing of Photovoltaic Modules
E1803 Standard Test Methods for Determining Structural Capacities of Insulated Panels
E1804 Standard Practice for Performing and Reporting Cost Analysis During the Design Phase of a Project
E1821 Standard Test Method for Determination of Carbohydrates in Biomass by Gas Chromatography
E1822 Standard Test Method for Fire Testing of Stacked Chairs
E1825 Standard Guide for Evaluation of Exterior Building Wall Materials, Products, and Systems
E1826 Standard Specification for Low Volatile Organic Compound (VOC) Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded
E1827 Standard Test Methods for Determining Airtightness of Buildings Using an Orifice Blower Door
E1830 Standard Test Methods for Determining Mechanical Integrity of Photovoltaic Modules
E1836/E1836M Standard Practice for Building Floor Area Measurements for Facility Management
E1844 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire
E1845 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth
E1851 Standard Test Method for Electromagnetic Shielding Effectiveness of Durable Rigid Wall Relocatable Structures
E1857 Standard Guide for Selection of Cleaning Techniques for Masonry, Concrete, and Stucco Surfaces
E1859/E1859M Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
E1886 Standard Test Method for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Missile(s) and Exposed to Cyclic Pressure Differentials
E1889 Standard Guide for Pavement Management Implementation
E1890 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment
E1903 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
E1903 Standard Practice for Environmental Site Assessments: Phase II Environmental Site Assessment Process
E1908 Standard Guide for Sample Selection of Debris Waste from a Building Renovation or Lead Abatement Project for Toxicity Characteristic Leaching Procedure (TCLP) Testing for Leachable Lead (Pb)
E1911 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
E1914 Standard Practice for Use of Terms Relating to the Development and Evaluation of Methods for Chemical Analysis
E1918 Standard Test Method for Measuring Solar Reflectance of Horizontal and Low-Sloped Surfaces in the Field
E1925 Specifiction for Engineering and Design Criteria for Rigid Wall Relocatable Structures
E1926 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
E1927 Standard Guide for Conducting Subjective Pavement Ride Quality Ratings
E1946 Standard Practice for Measuring Cost Risk of Buildings and Building Systems and Other Constructed Projects
E1950 Standard Practice for Reporting Results from Methods of Chemical Analysis
E1957 Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
E1960 Standard Practice for Calculating International Friction Index of a Pavement Surface
E1966 Standard Test Method for Fire-Resistive Joint Systems
E1971 Standard Guide for Stewardship for the Cleaning of Commercial and Institutional Buildings
E1974 Standard Specification for Shelter, Electrical Equipment S-250/G
E1975 Standard Specification for Shelter, Electrical, Equipment S-280/G
E1976 Standard Specification for Shelter, Tactical, Nonexpandable
E1977 Standard Specification for Shelter, Tactical, Expandable, One-Side
E1978 Standard Specification for Shelter, Tactical, Expandable, Two-Side
E1979 Standard Practice for Ultrasonic Extraction of Paint, Dust, Soil, and Air Samples for Subsequent Determination of Lead
E1980 Standard Practice for Calculating Solar Reflectance Index of Horizontal and Low-Sloped Opaque Surfaces
E1991 Standard Guide for Environmental Life Cycle Assessment (LCA) of Building Materials/Products
E1993 Standard Specification for Bituminous Water Vapor Retarders Used in Contact with Soil or Granular Fill Under Concrete Slabs
E1995 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
E1996 Standard Specification for Performance of Exterior Windows, Curtain Walls, Doors, and Impact Protective Systems Impacted by Windborne Debris in Hurricanes
E1998 Standard Guide for Assessing Depressurization-Induced Backdrafting and Spillage from Vented Combustion Appliances
E2004 Standard Test Method for Facing Cleavage of Sandwich Panels
E2013 Standard Practice for Constructing FAST Diagrams and Performing Function Analysis During Value Analysis Study
E2016 Standard Specification for Industrial Woven Wire Cloth
E2025 Standard Test Method for Evaluating Fenestration Components and Assemblies for Resistance to Impact Energies
E2026 Standard Guide for Seismic Risk Assessment of Buildings
E2027 Standard Practice for Conducting Proficiency Tests in the Chemical Analysis of Metals, Ores, and Related Materials
E2029 Standard Test Method for Volumetric and Mass Flow Rate Measurement in a Duct Using Tracer Gas Dilution
E2030 Standard Guide for Recommended Uses of Photoluminescent (Phosphorescent) Safety Markings
E2032 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
E2034 Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
E2047 Standard Test Method for Wet Insulation Integrity Testing of Photovoltaic Arrays
E2058 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
E2061 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles
E2067 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
E2068 Standard Test Method for Determination of Operating Force of Sliding Windows and Doors
E2083 Standard Classification for Building Construction Field Requirements, and Office Overhead Profit
E2093 Standard Guide for Optimizing, Controlling and Reporting Test Method Uncertainties from Multiple Workstations in the Same Laboratory Organization
E2098 Standard Test Method for Determining Tensile Breaking Strength of Glass Fiber Reinforcing Mesh for Use in Class PB Exterior Insulation and Finish Systems (EIFS), after Exposure to a Sodium Hydroxide Solution
E2099 Standard Practice for the Specification and Evaluation of Pre-Construction Laboratory Mockups of Exterior Wall Systems
E2100 Standard Practice for Calculating the International Runway Friction Index
E2101 Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
E2102 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
E2103 Standard Classification for Bridge Elements—UNIFORMAT II
E2110 Standard Terminology for Exterior Insulation and Finish Systems (EIFS)
E2112 Standard Practice for Installation of Exterior Windows, Doors and Skylights
E2114 Standard Terminology for Sustainability Relative to the Performance of Buildings
E2115 Standard Guide for Conducting Lead Hazard Assessments of Dwellings and of Other Child-Occupied Facilities
E2120 Standard Practice for Performance Evaluation of the Portable X-Ray Fluorescence Spectrometer for the Measurement of Lead in Paint Films
E2121 Standard Practice for Installing Radon Mitigation Systems in Existing Low-Rise Residential Buildings
E2126 Standard Test Methods for Cyclic (Reversed) Load Test for Shear Resistance of Vertical Elements of the Lateral Force Resisting Systems for Buildings
E2127 Standard Methods of Static Load Test for Combined Tensile and Transverse Load Resistance of Paneled Wall Systems in Building Construction
E2128 Standard Guide for Evaluating Water Leakage of Building Walls
E2129 Standard Practice for Data Collection for Sustainability Assessment of Building Products
E2131 Standard Practice For Addressing and Reporting Loss, Damage, or Destruction of Tangible Property
E2132 Standard Practice for Inventory Verification: Electronic and Physical Inventory of Assets
E2133 Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
E2134 Standard Test Method for Evaluating the Tensile-Adhesion Performance of an Exterior Insulation and Finish System (EIFS)
E2135 Standard Terminology for Property and Asset Management
E2136 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Durability
E2140 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
E2141 Standard Test Methods for Assessing the Durability of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2150 Standard Classification for Life-Cycle Environmental Work Elements—Environmental Cost Element Structure
E2151 Standard Terminology of Guides for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings
E2156 Standard Guide for Evaluating Economic Performance of Alternative Designs, Systems, and Materials in Compliance with Performance Standard Guides for Single-Family Attached and Detached Dwellings
E2157 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
E2166 Standard Practice for Organizing and Managing Building Data
E2167 Standard Guide for Selection and Use of Stone Consolidants
E2168 Standard Classification for Allowance, Contingency and Reserve Sums in Building Construction Estimating
E2173 Standard Guide for Disclosure of Environmental Liabilities
E2174 Standard Practice for On-Site Inspection of Installed Fire Stops
E2178 Standard Test Method for Air Permeance of Building Materials
E2179 Standard Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
E2187 Standard Test Method for Measuring the Ignition Strength of Cigarettes
E2188 Standard Test Method for Insulating Glass Unit Performance
E2189 Standard Test Method for Testing Resistance to Fogging in Insulating Glass Units
E2190 Standard Specification for Insulating Glass Unit Performance and Evaluation
E2202 Standard Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
E2203 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
E2204 Standard Guide for Summarizing the Economic Impacts of Building-Related Projects
E2213 Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
E2226 Standard Practice for Application of Hose Stream
E2230 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material
E2231 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
E2235 Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
E2239 Standard Practice for Record Keeping and Record Preservation for Lead Hazard Activities
E2240 Standard Test Method for Assessing the Current-Voltage Cycling Stability at 90°C (194°F) of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2241 Standard Test Method for Assessing the Current-Voltage Cycling Stability at Room Temperature of Absorptive Electrochromic Coatings on Sealed Insulating Glass Units
E2249 Standard Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
E2252 Standard Practice for Selection of Lead Hazard Reduction Methods for Identified Risks in Residential Housing or Child Occupied Facilities
E2255 Standard Practice for Conducting Visual Assessments for Lead Hazards in Buildings
E2257 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
E2259 Standard Guide for Archiving and Retrieving ITS-Generated Data
E2260 Standard Guide for Repointing (Tuckpointing) Historic Masonry
E2264 Standard Practice for Determining the Effects of Temperature Cycling on Fenestration Products
E2265 Standard Terminology for Anchors and Fasteners in Concrete and Masonry
E2266 Standard Guide for Design and Construction of Low-Rise Frame Building Wall Systems to Resist Water Intrusion
E2267 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Indoor Air Quality
E2268 Standard Test Method for Water Penetration of Exterior Windows, Skylights, and Doors by Rapid Pulsed Air Pressure Difference
E2269 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units using Gas Chromatography
E2270 Standard Practice for Periodic Inspection of Building Facades for Unsafe Conditions
E2271 Standard Practice for Clearance Examinations Following Lead Hazard Reduction Activities in Dwellings, and in Other Child-Occupied Facilities
E2273 Standard Test Method for Determining the Drainage Efficiency of Exterior Insulation and Finish Systems (EIFS) Clad Wall Assemblies
E2279 Standard Practice for Establishing the Guiding Principles of Property Management
E2280 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
E2281 Standard Practice for Process and Measurement Capability Indices
E2282 Standard Guide for Defining the Test Result of a Test Method
E2300 Standard Specification for Highway Traffic Monitoring Devices
E2306 Standard Practice for Disposal of Personal Property
E2307 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus
E2319 Standard Test Method for Determining Air Flow Through the Face and Sides of Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E2320 Standard Classification for Serviceability of an Office Facility for Thermal Environment and Indoor Air Conditions
E2321 Standard Practice for Use of Test Methods for Determining the Water Vapor Transmission (WVT) of Exterior Insulation and Finish Systems (EIFS)
E2322 Standard Test Method for Conducting Traverse and Concentrated Load Tests on Panels used in Floor and Roof Construction
E2335 Standard Guide for Laboratory Monitors
E2336 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems
E2340/E2340M Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
E2341/E2341M Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
E2342 Standard Test Method for Durability Testing of Duct Sealants
E2351 Standard Guide for Specifying and Evaluating Performance of Single Family Attached and Detached Dwellings-Functionality
E2353 Standard Test Methods for Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2354 Standard Guide for Assessing the Durability of Absorptive Electrochromic Coatings within Sealed Insulating Glass Units
E2355 Standard Test Method for Measuring the Uniformity of an Absorptive Electrochromic Coating on a Glazing Surface
E2356 Standard Practice for Comprehensive Building Asbestos Surveys
E2357 Standard Test Method for Determining Air Leakage of Air Barrier Assemblies
E2358 Standard Specification for the Performance of Glass in Permanent Glass Railing Systems, Guards, and Balustrades
E2359 Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
E2377 Standard Specification for Shelter, Electrical Equipment, Lightweight
E2378 Standard Practice for the Recognition of Impaired or Retired Personal Property
E2379 Standard Practice for Property Management for Career Development and Training
E2380/E2380M Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
E2392/E2392M Standard Guide for Design of Earthen Wall Building Systems
E2393 Standard Practice for On-Site Inspection of Installed Fire Resistive Joint Systems and Perimeter Fire Barriers
E2394 Standard Practice for Maintenance, Renovation and Repair of Installed Asbestos Cement Products
E2395 Standard Specification for Voluntary Security Performance of Window and Door Assemblies with and without Glazing Impact.
E2396 Standard Test Method for Saturated Water Permeability of Granular Drainage Media [Falling-Head Method] for Vegetative (Green) Roof Systems
E2397 Standard Practice for Determination of Dead Loads and Live Loads Associated with Vegetative (Green) Roof Systems
E2398 Standard Test Method for Water Capture and Media Retention of Geocomposite Drain Layers for Vegetative (Green) Roof Systems
E2399 Standard Test Method for Maximum Media Density for Dead Load Analysis of Vegitative (Green) Roof Systems
E2400 Standard Guide for Selection, Installation, and Maintenance of Plants for Green Roof Systems
E2404 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
E2415 Standard Practice for Installing Piezoelectric Highway Traffic Sensors
E2430 Standard Specification For Expanded Polystyrene (EPS) Thermal Insulation Boards For Use In Exterior Insulation and Finish Systems (EIFS)
E2431 Standard Practice for Determining the Resistance of Single Glazed Annealed Architectural Flat Glass to Thermal Loadings
E2432 Standard Guide for General Principles of Sustainability Relative to Buildings
E2437 Standard Practice for Designing and Validating Performance-Based Test Methods for the Analysis of Metals, Ores, and Related Materials
E2438 Standard Practice for Implementing Standard Performance Based Test Methods for the Analysis of Metals, Ores, and Related Materials
E2452 Standard Practice for Equipment Management Process Maturity (EMPM) Model
E2453 Standard Practice for Determining the Life-Cycle Cost of Ownership of Personal Property
E2459 Standard Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
E2461 Standard Practice for Determining the Thickness of Glass in Airport Traffic Control Tower Cabs
E2462 Standard Performance Specification for Cargo Bed Cover (CBC) HMMWV, Type I
E2463 Standard Performance Specification for Cargo Bed Cover (CBC) M105A2 Trailer, Type II
E2467 Standard Practice for Developing Axle Count Adjustment Factors
E2468 Standard Practice for Metadata to Support Archived Data Management Systems
E2484 Standard Specification for Multi-Story Building External Evacuation Controlled Descent Devices
E2485 Standard Test Method for Freeze/Thaw Resistance of Exterior Insulation and Finish Systems (EIFS) and Water Resistive Barrier Coatings
E2486 Standard Test Method for Impact Resistance of Class PB and PI Exterior Insulation and Finish Systems (EIFS)
E2489 Standard Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
E2495 Standard Practice for Prioritizing Asset Resources in Acquisition, Utilization, and Disposition
E2497 Standard Practice for Calculation of Asset Movement Velocity (AMV)
E2499 Standard Practice for Classification of Asset Physical Location Information
E2505 Standard Practice for Industrial Rope Access
E2506 Standard Guide for Developing a Cost-Effective Risk Mitigation Plan for New and Existing Constructed Facilities
E2511 Standard Guide for Detailing of EIFS-Clad Wall Assemblies
E2513 Standard Specification for Multi-Story Building External Evacuation Platform Rescue Systems
E2514 Standard Practice for Presentation Format of Elemental Cost Estimates, Summaries, and Analyses
E2515 Standard Test Method for Determination of Particulate Matter Emissions Collected by a Dilution Tunnel
E2516 Standard Classification for Cost Estimate Classification System
E2517 Standard Specification for Cargo Bed Cover, Type III (M35A2, 2 1/2 Ton Cargo Truck/M1078, 2 1/2 Ton Lightweight Medium Tactical Vehicle (LMTV)/ M1082, 2 1/2 Ton LMTV Trailer)
E2518 Standard Specification for Cargo Bed Cover, Type IV (M923, 5 Ton Cargo Truck/M1083, 5 Ton Medium Tactical Vehicle (MTV)/ M1082, 5 Ton MTV Trailer)
E2527 Standard Test Method for Electrical Performance of Concentrator Terrestrial Photovoltaic Modules and Systems Under Natural Sunlight
E2532 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
E2536 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests
E2554 Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
E2556/E2556M Standard Specification for Vapor Permeable Flexible Sheet Water-Resistive Barriers Intended for Mechanical Attachment
E2557 Standard Practice for Probable Maximum Loss (PML) Evaluations for Earthquake Due-Diligence Assessments
E2558 Standard Test Method for Determining Particulate Matter Emissions from Fires in Low Mass Wood-Burning Fireplaces
E2560 Standard Specification for Data Format for Pavement Profile
E2561 Standard Practice for the Installation of Inductive Loop Detectors
E2568 Standard Specification for PB Exterior Insulation and Finish Systems
E2570 Standard Test Methods for Evaluating Water-Resistive Barrier (WRB) Coatings Used under Exterior Insulation and Finish Systems (EIFS) or EIFS with Drainage
E2573 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
E2574/E2574M Standard Test Method for Fire Testing of School Bus Seat Assemblies
E2579 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
E2583 Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
E2586 Standard Practice for Calculating and Using Basic Statistics
E2587 Standard Practice for Use of Control Charts in Statistical Process Control
E2599 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
E2604 Standard Practice for Data Characteristics of Equipment Records
E2605 Standard Practice for Receiving Property
E2606 Standard Practice for Receipt Notification as a Result of Tangible Property Movement
E2607 Standard Practice for Cannibalization/Reclamation of Serviceable Equipment Components to Support Demand Requirements
E2608 Standard Practice for Equipment Control Matrix (ECM)
E2611 Standard Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
E2618 Standard Test Method for Measurement of Particulate Emissions and Heating Efficiency of Outdoor Solid Fuel-Fired Hydronic Heating Appliances
E2619/E2619M Standard Practice for Measuring and Calculating Building Loss Features That Take Up Floor Area in Buildings
E2620 Standard Classification for Program and Project Estimate Summaries
E2631 Standard Practice for Physical Placement of an Entity-Controlled Supplemental Identification Label
E2634 Standard Specification for Flat Wall Insulating Concrete Form (ICF) Systems
E2635 Standard Practice for Water Conservation in Buildings Through In-Situ Water Reclamation
E2637 Standard Guide for Utilizing the Environmental Cost Element Structure Presented by Classification E 2150
E2638 Standard Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room
E2649 Standard Test Method for Determining Argon Concentration in Sealed Insulating Glass Units Using Spark Emission Spectroscopy
E2652 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C
E2653 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories
E2665 Standard Specification for Archiving ITS-Generated Traffic Monitoring Data
E2666 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
E2667 Standard Practice for Acquiring Intersection Turning Movement Traffic Data
E2671 Standard Practice for Defining Movements, Shipments, and Transfers of Tangible Property
E2672 Standard Practice for Identification and Categorization of Tooling
E2674 Standard Practice for Assessment of Impact of Mobile Data Storage Device (MDSD) Loss
E2675 Standard Practice for Property Management System Outcomes
E2676 Standard Practice for Tangible Property Mobility Index (MI)
E2688 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
E2690 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
E2691 Standard Practice for Job Productivity Measurement
E2692 Standard Test Method for Structural Performance of Thermal Barriers in Fenestration Products ,
E2707 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
E2715 Standard Practice for Moveable Property Storage
E2717 Standard Practice for Estimating the Environmental Load of Residential Wastewater
E2726/E2726M Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands
E2727 Standard Practice for Assessment of Rainwater Quality
E2728 Standard Guide for Water Stewardship in the Design, Construction, and Operation of Buildings
E2741 Standard Specification for Evaluation and Selection of Destinations for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2742 Standard Specification for Evaluation and Selection of Exhibits for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2743 Standard Specification for Evaluation and Selection of Transportation for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2745 Standard Specification for Evaluation and Selection of Audio Visual (AV) and Production for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2746 Standard Specification for Evaluation and Selection of Communication and Marketing Materials for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2747 Standard Specification for Evaluation and Selection of Onsite Offices for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2748 Standard Guide for Fire-Resistance Experiments
E2749 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
E2750 Standard Guide for Extension of Data For Penetrations Seals
E2751 Standard Practice for Design and Performance of Supported Glass Walkways
E2759 Standard Practice for Highway Traffic Monitoring Truth-in-Data
E2768 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
E2773 Standard Specification for Evaluation and Selection of Food and Beverage for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2774 Standard Specification for Evaluation and Selection of Venues for Environmentally Sustainable Meetings, Events, Trade Shows, and Conferences
E2779 Standard Test Method for Determining Particulate Matter Emissions from Pellet Heaters
E2780 Standard Test Method for Determining Particulate Matter Emissions from Wood Heaters
E2785 Standard Test Method for Exposure of Firestop Materials to Severe Environmental Conditions
E2786 Standard Test Methods for Measuring Expansion of Intumescent Materials Used in Firestop and Joint Systems
E2788 Standard Specification for Use of Expanded Shale, Clay and Slate (ESCS) as a Mineral Component in the Growing Media and the Drainage Layer for Vegetative (Green) Roof Systems
E2793 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment
E2811 Standard Practice for Management of Low Risk Property (LRP)
E2812 Standard Practice for Uniform Data Management in Asset Management Records Systems
E2813 Standard Practice for Building Enclosure Commissioning
E2816 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems
E2817 Standard Test Method for Test Fueling Masonry Heaters
E2835 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device
E2837 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies
E2840 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots
E2841 Standard Guide for Conducting Inspections of Building Facades for Unsafe Conditions
F36 Standard Test Method for Compressibility and Recovery of Gasket Materials
F37 Standard Test Methods for Sealability of Gasket Materials
F88/F88M Standard Test Method for Seal Strength of Flexible Barrier Materials
F146 Standard Test Methods for Fluid Resistance of Gasket Materials
F150 Standard Test Method for Electrical Resistance of Conductive and Static Dissipative Resilient Flooring
F386 Standard Test Method for Thickness of Resilient Flooring Materials Having Flat Surfaces
F402 Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
F405 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings
F409 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
F436 Standard Specification for Hardened Steel Washers
F436M Standard Specification for Hardened Steel Washers [Metric]
F437 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F438 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
F439 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F441/F441M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F442/F442M Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)
F444 Standard Consumer Safety Specification for Scald-Preventing Devices and Systems in Bathing Areas
F445 Consumer Safety Specification for Thermal-Shock-Preventing Devices and Systems in Showering Areas
F446 Standard Consumer Safety Specification for Grab Bars and Accessories Installed in the Bathing Area
F449 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
F462 Standard Consumer Safety Specification for Slip-Resistant Bathing Facilities
F477 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F480 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
F481 Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
F493 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
F510 Standard Test Method for Resistance to Abrasion of Resilient Floor Coverings Using an Abrader with a Grit Feed Method
F512 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
F547 Standard Terminology of Nails for Use with Wood and Wood-Base Materials
F567 Standard Practice for Installation of Chain-Link Fence
F588 Standard Test Methods for Measuring the Forced Entry Resistance of Window Assemblies, Excluding Glazing Impact
F593 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
F594 Standard Specification for Stainless Steel Nuts
F626 Standard Specification for Fence Fittings
F628 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
F645 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
F654 Standard Specification for Residential Chain Link Fence Gates
F656 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
F667 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings
F668 Standard Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
F679 Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
F693 Standard Practice for Sealing Seams of Resilient Sheet Flooring Products by Use of Liquid Seam Sealers
F708 Standard Practice for Design and Installation of Rigid Pipe Hangers
F710 Standard Practice for Preparing Concrete Floors to Receive Resilient Flooring
F714 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter
F738M Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs
F771 Standard Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
F793 Standard Classification of Wall Covering by Use Characteristics
F794 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
F810 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
F834 Standard Consumer Safety Specification for Toy Chests
F835M Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F835 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
F836M Standard Specification for Style 1 Stainless Steel Metric Nuts
F837 Standard Specification for Stainless Steel Socket Head Cap Screws
F837M Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]
F842 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
F844 Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
F851 Standard Test Method for Self-Rising Seat Mechanisms
F876 Standard Specification for Crosslinked Polyethylene (PEX) Tubing
F877 Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems
F879M Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
F879 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
F883 Standard Performance Specification for Padlocks
F891 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
F894 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
F900 Standard Specification for Industrial and Commercial Swing Gates
F903 Standard Test Method for Resistance of Materials Used in Protective Clothing to Penetration by Liquids
F904 Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
F925 Standard Test Method for Resistance to Chemicals of Resilient Flooring
F934 Standard Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
F949 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
F959M Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]
F959 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
F963 Standard Consumer Safety Specification for Toy Safety
F969 Standard Practice for Construction of Chain-Link Tennis Court Fence
F970 Standard Test Method for Static Load Limit
F976 Standard Specification for Portable Kerosene and Diesel Containers for Consumer Use
F1007 Standard Specification for Pipeline Expansion Joints of the Packed Slip Type for Marine Application
F1043 Standard Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
F1055 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing
F1060 Standard Test Method for Thermal Protective Performance of Materials for Protective Clothing for Hot Surface Contact
F1066 Standard Specification for Vinyl Composition Floor Tile
F1083 Standard Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
F1090 Standard Classification for Bank and Mercantile Vault Construction
F1105 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
F1120 Standard Specification for Circular Metallic Bellows Type Expansion Joints for Piping Applications
F1123 Standard Specification for Non-Metallic Expansion Joints
F1136/F1136M Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
F1137 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
F1141 Standard Specification for Wallcovering
F1182 Standard Specification for Anodes, Sacrificial Zinc Alloy
F1183 Standard Specification for Aluminum Alloy Chain Link Fence Fabric
F1184 Standard Specification for Industrial and Commercial Horizontal Slide Gates
F1216 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
F1233 Standard Test Method for Security Glazing Materials And Systems
F1249 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
F1267 Standard Specification for Metal, Expanded, Steel
F1281 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F1282 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
F1290 Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings
F1292 Standard Specification for Impact Attenuation of Surfacing Materials within the Use Zone of Playground Equipment
F1303 Standard Specification for Sheet Vinyl Floor Covering with Backing
F1336 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
F1342 Standard Test Method for Protective Clothing Material Resistance to Puncture
F1344 Standard Specification for Rubber Floor Tile
F1345 Standard Specification for Zinc-5 % Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
F1346 Standard Performance Specification for Safety Covers and Labeling Requirements for All Covers for Swimming Pools, Spas and Hot Tubs
F1379 Standard Terminology Relating to Barbed Tape
F1412 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
F1417 Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air
F1427 Standard Consumer Safety Specification for Bunk Beds
F1450 Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention and Correctional Facilities
F1459 Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
F1469 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
F1476 Standard Specification for Performance of Gasketed Mechanical Couplings for Use in Piping Applications
F1487 Standard Consumer Safety Performance Specification for Playground Equipment for Public Use
F1488 Standard Specification for Coextruded Composite Pipe
F1499 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
F1516 Standard Practice for Sealing Seams of Resilient Flooring Products by the Heat Weld Method (when Recommended)
F1553 Standard Guide for Specifying Chain Link Fence
F1554 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
F1577 Standard Test Methods for Detention Locks for Swinging Doors
F1578 Standard Test Method for Contact Closure Cycling of a Membrane Switch
F1592 Standard Test Methods for Detention Hollow Metal Vision Systems
F1595 Standard Practice for Viewing Conditions for Visual Inspection of Membrane Switches
F1596 Standard Test Method for Exposure of Membrane Switches to Temperature and Relative Humidity
F1598 Standard Test Method for Determining the Effects of Chemical/Solvent Exposure to a Membrane Switch/Graphic Overlay (Spot Test Method)
F1642 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
F1643 Standard Test Methods for Detention Sliding Door Locking Device Assembly
F1647 Standard Test Methods for Organic Matter Content of Athletic Field Rootzone Mixes
F1661 Standard Test Method for Determining the Contact Bounce Time of a Membrane Switch
F1662 Standard Test Method for Verifying the Specified Dielectric Withstand Voltage and Determining the Dielectric Breakdown Voltage of a Membrane Switch
F1663 Standard Test Method for Determining the Capacitance of a Membrane Switch
F1664 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
F1665 Standard Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
F1667 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples
F1668 Standard Guide for Construction Procedures for Buried Plastic Pipe
F1673 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
F1680 Standard Test Method for Determining Circuit Resistance of a Membrane Switch
F1683 Standard Practice for Creasing or Bending a Membrane Switch, Membrane Switch Flex Tail Assembly or Membrane Switch Component
F1689 Standard Test Method for Determining the Insulation Resistance of a Membrane Switch
F1700 Standard Specification for Solid Vinyl Floor Tile
F1743 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
F1758 Standard Test Methods for Detention Hinges Used on Detention-Grade Swinging Doors
F1759 Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
F1760 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
F1762 Standard Practice for Exposing a Membrane Switch to Variation in Atmospheric Pressure
F1807 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
F1812 Standard Test Method for Determining the Effectiveness of Membrane Switch ESD Shielding
F1852 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
F1859 Standard Specification for Rubber Sheet Floor Covering Without Backing
F1860 Standard Specification for Rubber Sheet Floor Covering With Backing
F1861 Standard Specification for Resilient Wall Base
F1866 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
F1869 Standard Test Method for Measuring Moisture Vapor Emission Rate of Concrete Subfloor Using Anhydrous Calcium Chloride
F1895 Practice for Submersion of a Membrane Switch
F1910 Standard Specification for Long Barbed Tape Obstacles
F1911 Standard Practice for Installation of Barbed Tape
F1913 Standard Specification for Vinyl Sheet Floor Covering Without Backing
F1915 Standard Test Methods for Glazing for Detention Facilities
F1924 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F1941M Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]
F1941 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
F1948 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
F1951 Standard Specification for Determination of Accessibility of Surface Systems Under and Around Playground Equipment
F1960 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
F1961 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
F1970 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
F1973 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
F1974 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F1986 Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
F1995 Standard Test Method for Determining the Shear Force of a Surface Mount Device (SMD) in a Membrane Switch
F1996 Standard Test Method for Silver Migration for Membrane Switch Circuitry
F2006 Standard Safety Specification for Window Fall Prevention Devices for Non-Emergency Escape (Egress) and Rescue (Ingress) Windows
F2014 Standard Specification for Non-Reinforced Extruded Tee Connections for Piping Applications
F2034 Standard Specification for Sheet Linoleum Floor Covering
F2055 Standard Test Method for Size and Squareness of Resilient Floor Tile by Dial Gage Method
F2072 Standard Practice for Hosedown of a Membrane Switch
F2075 Standard Specification for Engineered Wood Fiber for Use as a Playground Safety Surface Under and Around Playground Equipment
F2080 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
F2090 Standard Specification for Window Fall Prevention Devices With Emergency Escape (Egress) Release Mechanisms
F2098 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
F2130 Standard Test Method for Measuring Repellency, Retention, and Penetration of Liquid Pesticide Formulation Through Protective Clothing Materials
F2158 Standard Specification for Residential Central-Vacuum Tube and Fittings
F2159 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
F2165 Standard Specification for Flexible Pre-Insulated Piping
F2169 Standard Specification for Resilient Stair Treads
F2170 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
F2195 Standard Specification for Linoleum Floor Tile
F2200 Standard Specification for Automated Vehicular Gate Construction
F2206 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
F2233 Standard Guide for Safety, Access Rights, Construction, Liability, and Risk Management for Optical Fiber Networks in Existing Sewers
F2262 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
F2285 Standard Consumer Safety Performance Specification for Diaper Changing Tables for Commercial Use
F2303 Standard Practice for Selection of Gravity Sewers Suitable for Installation of Optical Fiber Cable and Conduits
F2304 Standard Practice for Sealing of Sewers Using Chemical Grouting
F2306/F2306M Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
F2329 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
F2349 Standard Practice for Operation and Maintenance of Integrated Natural Gas Pipelines and Optical Fiber Systems
F2350 Standard Practice for Selection of Natural Gas Pipelines Suitable for Installation of Optical Fiber Systems
F2389 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems
F2408 Standard Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
F2414 Standard Practice for Sealing Sewer Manholes Using Chemical Grouting
F2434 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
F2454 Standard Practice for Sealing Lateral Connections and lines from the mainline Sewer Systems by the Lateral Packer Method, Using Chemical Grouting
F2462 Standard Practice for Operation and Maintenance of Sewers with Optical Fiber Systems
F2509 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F2519 Standard Test Method for Grease Particle Capture Efficiency of Commercial Kitchen Filters and Extractors
F2550 Standard Practice for Locating Leaks in Sewer Pipes Using Electro-Scan--the Variation of Electric Current Flow Through the Pipe Wall
F2551 Standard Practice for Installing a Protective Cementitious Liner System in Sanitary Sewer Manholes
F2592 Standard Test Method for Measuring the Force-Displacement of a Membrane Switch
F2611 Standard Guide for Design and Construction of Chain Link Security Fencing
F2623 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
F2656 Standard Test Method for Vehicle Crash Testing of Perimeter Barriers
F2735 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
F2769 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
G8 Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
G21 Standard Practice for Determining Resistance of Synthetic Polymeric Materials to Fungi
G37 Standard Practice for Use of Mattsson's Solution of pH 7.2 to Evaluate the Stress- Corrosion Cracking Susceptibility of Copper-Zinc Alloys
G62 Standard Test Methods for Holiday Detection in Pipeline Coatings
G87 Standard Practice for Conducting Moist SO2 Tests
G90 Standard Practice for Performing Accelerated Outdoor Weathering of Nonmetallic Materials Using Concentrated Natural Sunlight
G142 Standard Test Method for Determination of Susceptibility of Metals to Embrittlement in Hydrogen Containing Environments at High Pressure, High Temperature, or Both
G151 Standard Practice for Exposing Nonmetallic Materials in Accelerated Test Devices that Use Laboratory Light Sources
G152 Standard Practice for Operating Open Flame Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G153 Standard Practice for Operating Enclosed Carbon Arc Light Apparatus for Exposure of Nonmetallic Materials
G154 Standard Practice for Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials
G155 Standard Practice for Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials
G162 Standard Practice for Conducting and Evaluating Laboratory Corrosions Tests in Soils
G173 Standard Tables for Reference Solar Spectral Irradiances: Direct Normal and Hemispherical on 37° Tilted Surface
G190 Standard Guide for Developing and Selecting Wear Tests
R0009 Abbreviated Metric Practice Guide for the Roofing Industry (This is not an ASTM standard)
R0028 Manual of Cement Testing ( This is not an ASTM standard; available as PDF, only)
R0029 Metric Practice Guide for Cement (This is not an ASTM standard; available as PDF, only)
R0030 Manual of Aggregate and Concrete Testing (This is not an ASTM standard; available as PDF, only)
R0031 Metric Practice Guide for Concrete and Concrete Aggregates