Check the Contents

ASTM Standards for BUILDING LIME AND LIME-BASED CONSTRUCTION APPLICATIONS
Stock #: LIME05

TABLE OF CONTENTS

C 5-03 Specifications for Quicklime for Structural Purposes

C 11-04 Terminology Relating to Gypsum and Related Building Materials and Systems

C 25-99 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime

C 28/C 28M-00E1 Specification for Gypsum Plasters

C 35-01 Specification for Inorganic Aggregates for Use In Gypsum Plaster

C 50-00 Practice for Sampling, Inspection, Packing, and Marking of Lime and Limestone Products

C 51-02 Terminology Relating to Lime and Limestone (as used by the Industry)

C 55-03 Specification for Concrete Brick

C 59/C 59M-00 Specification for Gypsum Casting and Molding Plaster

C 61/C 61M-00 Specification for Gypsum Keene's Cement

C 73-99a Specification for Calcium Silicate Face Brick (Sand-Lime Brick)

C 109/C 109M-02 Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or ( 50-mm) Cube Specimens

C 110-04 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone

C 117-04 Test Method for Material Finer than 75-µm (No. 200) Sieve in Mineral Aggregates by Washing

C 129-03 Specification for Nonload Bearing Concrete Masonry Units

C 136-04 Test Method for Sieve Analysis of Fine and Coarse Aggregates

C 141-97 Specification for Hydraulic Hydrated Lime for Structural Purposes

C 144-03 Specification for Aggregate for Masonry Mortar

C 150-04aE1 Specification for Portland Cement

C 185-02 Air Content of Hydraulic Cement Mortar

C 188-95 ( 2003 ) Test Method for Density of Hydraulic Cement

C 204-00 Test Method for Fineness of Hydraulic Cement by Air Permeability Apparatus

C 206-03 Specification for Finishing Hydrated Lime

C 207-04 Specification for Hydrated Lime for Masonry Purposes

C 226-02 Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement

C 230/C 230M-03 Specification for Flow Table for Use in Tests of Hydraulic Cement

C 231-04 Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

C 260-01 Specification for Air-Entraining Admixtures for Concrete

C 270-04a Specification for Mortar for Unit Masonry

C 305-99E1 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency

C 387-04 Standard Specification for Packaged, Dry, Combined Materials for Mortar and Concrete

C 430-96 ( 2003 ) Test Method for Fineness of Hydraulic Cement by the 45-µm (No. 325 ) Sieve

C 471M-01 Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)

C 472-99 ( 2004 ) Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete

C 476-02 Specification for Grout for Masonry

C 511-03 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

C 593-95 ( 2000 ) Specification for Fly Ash and Other Pozzolans for Use with Lime

C 595-03 Specification for Blended Hydraulic Cement

C 631-95a ( 2004 ) Specification for Bonding Compounds for Interior Gypsum Plastering

C 670-03 Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

C 702-98 ( 2003 ) Practice for Reducing Field Samples of Aggregate to Testing Size

C 744-99 Specification for Prefaced Concrete and Calcium Silicate Masonry Units

C 778-02 Specification for Standard Sand

C 780-02 Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

C 821-78 ( 2000 ) Specification for Lime for Use with Pozzolans

C 840-04a Specification for Application and Finishing of Gypsum Board

C 841-03 Specification for Installation of Interior Lathing and Furring

C 842-99 Specification for Application of Interior Gypsum Plaster

C 847-04 Specification for Metal Lath

C 897-00 Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters

C 926-98a Specification for Application of Portland Cement-Based Plaster

C 932-03 Specification for Bonding Compounds for Exterior Plastering

C 933-04 Specification for Welded Wire Lath

C 952-02E1 Test Method for Bond Strength of Mortar to Masonry Units

C 977-03 Specification for Quicklime and Hydrated Lime for Soil Stabilization

C 1005-00 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements

C 1019-03 Test Method for Sampling and Testing Grout

C 1063-03 Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster

C 1072-00a Test Method for Measurement of Masonry Flexural Bond Strength

C 1097-95 ( 2001 ) Specification for Hydrated Lime for Use in Asphaltic-Concrete Mixtures

C 1107-02 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

C 1142-95 ( 2001 ) Specification for Extended Life Mortar for Unit Masonry

C 1157-03 Performance Specification for Hydraulic Cement

C 1164-92 ( 2003 ) Practice for Evaluation of Limestone or Lime Uniformity from a Single Source

C 1180-03a?1 Terminology of Mortar and Grout for Unit Masonry

C 1271-99 Test Method for X-Ray Spectrometric Analysis of Lime and Limestone

C 1301-95 ( 2001 ) Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)

C 1329-04 Specification for Mortar Cement

C 1357-04 Test Methods for Evaluating Masonry Bond Strength

C 1384-03 Specification for Admixtures for Masonry Mortars

C 1396/C 1396M-04 Specification for Gypsum Board

C 1452-00 Specification for Reinforced Autoclaved Aerated Concrete Elements

C 1489-01 Specification for Lime Putty for Structural Purposes

C 1506-03 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters

D 75-03 Practice for Sampling Aggregates

D 242-04 Specification for Mineral Filler For Bituminous Paving Mixtures

D 698-00a?1 Test Methods for Laboratory Compaction Characteristics of Soil Using Standard Effort

D 3155-98 Test Method For Lime Content of Uncured Soil-Lime Mixtures

D 3551-02 Practice for Lab Preparation of Soil-Lime Mixtures Using a Mechanical Mixer

D 3877-02 Test Methods for One-Dimensional Expansion, Shrinkage, and Uplift Pressure of Soil-Lime Mixtures

D 4303-03 Test Methods for Lightfastness of Colorants Used in Artists Materials

D 4318-00 Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils

D 4546-03 Test Methods for One-Dimensional Swell or Settlement Potential of Cohesive Soils

D 4609-01 Guide for Evaluating Effectiveness of Chemicals for Soil Stabilization

D 4829-03 Test Method for Expansion Index of Soils

D 4867/D4867M-04 Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

D 5050-96 ( 2002 ) Guide for Commercial Use of Lime Kiln Dusts and Portland Cement Kiln Dusts

D 5093-02 Test Method for Field Measurement of Infiltration Rate Using a Double-Ring Infiltrometer with a Sealed-Inner Ring

D 5102-04 Test Method for Unconfined Compressive Strength of Compacted Soil-Lime Mixtures

D 5239-04 Standard Practice for Characterizing Fly Ash for Use in Soil Stabilization

D 5370-96 ( 2002 ) Specification for Pozzolanic Blended Materials in Construction Applications

D 6236-98 ( 2004 ) Guide for Coring and Logging Cement- or Lime-Stabilized Soil

D 6276-99a Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

E 11-04 Specification for Wire Cloth and Sieves for Testing Purposes

E 29-02E1 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications

E 96-00E1 Test Method for Water Vapor Transmission of Materials

E 200-97 ( 2001) E1 Practice for Preparation, Standardization and Storage of Standard and Reagent Solutions for Chemical Analysis

E 514-04 Test Method For Water Penetration and Leakage Through Masonry

E 518-03 Test Methods for Flexural Bond Strength of Masonry

E 691-99 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method

E 832-81 ( 2003 ) Specification for Laboratory Filter Papers

E 1266-88( 1999 ) Practice for Processing Mixtures of Lime, Fly Ash, and Heavy Metal Wastes in Structural Fills and Other Construction Applications

E 2260-03 Guide for Repointing (Tuckpointing) Historic Masonry