ASTM Volume 15.10, June 2014

    Packaging; Flexible Barrier Packaging

    Table of Contents

    D642-00(2010) Standard Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads

    D685-12 Standard Practice for Conditioning Paper and Paper Products for Testing

    D880-92(2008) Standard Test Method for Impact Testing for Shipping Containers and Systems

    D951-99(2010) Standard Test Method for Water Resistance of Shipping Containers by Spray Method

    D996-10a Standard Terminology of Packaging and Distribution Environments

    D999-08 Standard Test Methods for Vibration Testing of Shipping Containers

    D1185-98a(2009) Standard Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping

    D1434-82(2009)e1 Standard Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting

    D1596-14 Standard Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material

    D1974/D1974M-10 Standard Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes

    D1975-95(2010) Standard Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails

    D2063/D2063M-10(2012) Standard Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment

    D2221-01(2010) Standard Test Method for Creep Properties of Package Cushioning Materials

    D2658-04(2013) Standard Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)

    D2860/D2860M-04(2010) Standard Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90° Angle and Constant Stress

    D3060-94(2013) Standard Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products

    D3061-97(2013) Standard Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans

    D3064-97(2013) Standard Terminology Relating To Aerosol Products

    D3065-01(2013) Standard Test Methods for Flammability of Aerosol Products

    D3069-94(2013) Standard Test Method for Delivery Rate of Aerosol Products

    D3070-00(2010) Standard Test Method of Rapid Pressure Determination of Pressurized Products

    D3076-00(2010) Standard Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers

    D3078-02(2013) Standard Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission

    D3079-94(2009)e1 Standard Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products

    D3089-97(2008) Standard Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes

    D3090-72(2008) Standard Practice for Storage Testing of Aerosol Products

    D3091-72(2008) Standard Practice for Safe Filling of Low-Pressure Pressurized Products

    D3094-00(2010) Standard Test Method for Seepage Rate of Aerosol Products

    D3103-07e1 Standard Test Method for Thermal Insulation Performance of Distribution Packages

    D3198-97(2007) Standard Test Method for Application and Removal Torque of Threaded or Lug-Style Closures

    D3330/D3330M-04(2010) Standard Test Method for Peel Adhesion of Pressure-Sensitive Tape

    D3332-99(2010) Standard Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines

    D3469-97(2007) Standard Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures

    D3470-97(2007) Standard Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures

    D3472-97(2007) Standard Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures

    D3474-90(2012) Standard Practice for Calibration and Use of Torque Meters Used in Packaging Applications

    D3475-14 Standard Classification of Child-Resistant Packages

    D3481-06(2011) Standard Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

    D3580-95(2010) Standard Test Methods for Vibration (Vertical Linear Motion) Test of Products

    D3611-06(2011) Standard Practice for Accelerated Aging of Pressure-Sensitive Tapes

    D3652/D3652M-01(2012) Standard Test Method for Thickness of Pressure-Sensitive Tapes

    D3654/D3654M-06(2011) Standard Test Methods for Shear Adhesion of Pressure-Sensitive Tapes

    D3715/D3715M-98(2011) Standard Practice for Quality Assurance of Pressure-Sensitive Tapes

    D3759/D3759M-05(2011) Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape

    D3810-97(2007) Standard Test Method for Minimum Application Torque of Type IA Child-Resistant Closures

    D3811/D3811M-96(2011) Standard Test Method for Unwind Force of Pressure-Sensitive Tapes

    D3813/D3813M-98(2012)e1 Standard Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes

    D3815/D3815M-05(2011) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus

    D3816/D3816M-96(2012) Standard Test Method for Water Penetration Rate of Pressure-Sensitive Tapes

    D3833/D3833M-96(2011) Standard Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes

    D3889/D3889M-96(2012) Standard Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature

    D3890-05(2010) Standard Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser

    D3950-12a Standard Specification for Strapping, Nonmetallic (and Joining Methods)

    D3951-10 Standard Practice for Commercial Packaging

    D3953-13 Standard Specification for Strapping, Flat Steel and Seals

    D3968-97(2007) Standard Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures

    D3985-05(2010)e1 Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor

    D4003-98(2009) Standard Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems

    D4041/D4041M-05(2010)e1 Standard Practice for Determining Spray Patterns of Mechanical Pump Dispensers

    D4168-95(2008)e1 Standard Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials

    D4169-09 Standard Practice for Performance Testing of Shipping Containers and Systems

    D4267-07 Standard Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers

    D4279-95(2009) Standard Test Methods for Water Vapor Transmission of Shipping Containers-Constant and Cycle Methods

    D4332-13 Standard Practice for Conditioning Containers, Packages, or Packaging Components for Testing

    D4333/D4333M-05(2010)e1 Test Method for the Compatibility of Mechanical Pump Dispenser Components

    D4334-05(2010) Standard Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser

    D4335-99(2010) Standard Test Method for Determination of Component Retention of a Mechanical Pump Dispenser

    D4336-05(2010) Standard Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser

    D4504-94(2011) Standard Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods

    D4577-05(2010) Standard Test Method for Compression Resistance of a Container Under Constant Load

    D4649-03(2009) Standard Guide for Selection and Use of Stretch Wrap Films

    D4675-14 Standard Guide for Selection and Use of Flat Strapping Materials

    D4727/D4727M-12 Standard Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes

    D4728-06(2012) Standard Test Method for Random Vibration Testing of Shipping Containers

    D4774-11e1 Standard Specification for User Applied Drug Labels in Anesthesiology

    D4775/D4775M-09 Standard Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)

    D4919-03(2008) Standard Specification for Testing of Hazardous Materials Packagings

    D4991-07 Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method

    D5077-90(2009) Standard Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials

    D5094/D5094M-09 Standard Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures

    D5105-05(2011) Standard Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight

    D5112-98(2009) Standard Test Method for Vibration (Horizontal Linear Sinusoidal Motion) Test of Products

    D5118/D5118M-12 Standard Practice for Fabrication of Fiberboard Shipping Boxes

    D5168-12 Standard Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers

    D5264-98(2011) Standard Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester

    D5265-09 Standard Test Method for Bridge Impact Testing

    D5276-98(2009) Standard Test Method for Drop Test of Loaded Containers by Free Fall

    D5277-92(2008) Standard Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester

    D5330/D5330M-06(2012) Standard Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced

    D5331-03(2009)e1 Standard Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films

    D5375/D5375M-98(2011) Standard Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock

    D5414-95(2012) Standard Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films

    D5415-95(2012) Standard Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing

    D5416-95(2012) Standard Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing

    D5445-11a Standard Practice for Pictorial Markings for Handling of Goods

    D5458-95(2012) Standard Test Method for Peel Cling of Stretch Wrap Film

    D5459-95(2012) Standard Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film

    D5486/D5486M-06(2012) Standard Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing

    D5487-98(2008) Standard Test Method for Simulated Drop of Loaded Containers by Shock Machines

    D5570/D5570M-10 Standard Test Method for Water Resistance of Tape and Adhesives Used as Box Closure

    D5571-94(2010) Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity

    D5639/D5639M-11 Standard Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements

    D5663-97(2011) Standard Guide for Validating Recycled Content in Packaging Paper and Paperboard

    D5728-12 Standard Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport

    D5748-95(2012) Standard Test Method for Protrusion Puncture Resistance of Stretch Wrap Film

    D5749-01(2012) Standard Specification for Reinforced and Plain Gummed Tape for Sealing and Securing

    D5750/D5750M-95(2012) Standard Guide for Width and Length of Pressure-Sensitive Tape

    D5833-12 Standard Guide for Source Reduction Reuse, Recycling, or Disposal of Steel Cans

    D6039/D6039M-11 Standard Specification for Open and Covered Wood Crates

    D6055-96(2014) Standard Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates

    D6123/D6123M-97(2012) Standard Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking

    D6179-07(2014) Standard Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates

    D6198-12 Standard Guide for Transport Packaging Design

    D6199-07(2012) Standard Practice for Quality of Wood Members of Containers and Pallets

    D6251/D6251M-11 Standard Specification for Wood-Cleated Panelboard Shipping Boxes

    D6252/D6252M-98(2011) Standard Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90° Angle

    D6253-10 Standard Practice for Treatment and/or Marking of Wood Packaging Materials

    D6254/D6254M-13 Standard Specification for Wirebound Pallet-Type Wood Boxes

    D6255/D6255M-05(2011) Standard Specification for Steel or Aluminum Slotted Angle Crates

    D6256/D6256M-10 Standard Specification for Wood-Cleated Shipping Boxes and Skidded, Load-Bearing Bases

    D6295/D6295M-98(2011) Standard Test Method for Dispensability of Light-Duty Pressure-Sensitive Film Tape

    D6344-04(2009) Standard Test Method for Concentrated Impacts to Transport Packages

    D6398-08(2014) Standard Practice to Enhance Identification of Drug Names on Labels

    D6534-05(2010) Standard Test Method for Determining the Peak Force-to-Actuate a Mechanical Pump Dispenser

    D6535/D6535M-05(2010)e1 Standard Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser

    D6536/D6536M-00(2010)e1 Standard Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser

    D6537-00(2014) Standard Practice for Instrumented Package Shock Testing For Determination of Package Performance

    D6551/D6551M-05(2011) Standard Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus

    D6573/D6573M-13 Standard Specification for General Purpose Wirebound Shipping Boxes

    D6590/D6590M-00(2012) Standard Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans

    D6633-05(2010) Standard Test Method for Basic Functional Stability of a Mechanical Pump Dispenser

    D6653/D6653M-13 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method

    D6654-05(2010) Standard Test Method for Basic Storage Stability of a Mechanical Pump Dispenser

    D6655-01(2007) Standard Terminology Relating to Mechanical Pump Dispensers

    D6787/D6787M-02(2012)e1 Standard Specification for Repositionable Note Pad

    D6788-02(2012) Standard Specification for Repositionable Pressure-Sensitive Flags

    D6804-02(2011) Standard Guide for Hand Hole Design in Corrugated Boxes

    D6834-02(2008) Standard Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser

    D6880/D6880M-11 Standard Specification for Wood Boxes

    D6881/D6881M-03(2013) Standard Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density

    D7030-04(2009) Standard Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine

    D7257-06(2011) Standard Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions

    D7298-06(2011)e1 Standard Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation

    D7386-12 Standard Practice for Performance Testing of Packages for Single Parcel Delivery Systems

    D7387-13 Standard Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)

    D7434-08 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads

    D7435-08 Standard Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers

    D7478/D7478M-11 Standard Specification for Heavy Duty Sheathed Wood Crates

    D7580/D7580M-09 Standard Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads

    D7660-10 Standard Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings

    D7709-12 Standard Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters

    D7790-12 Standard Guide for Preparation of Plastic Packagings Containing Liquids for United Nations (UN) Drop Testing

    D7887-13 Standard Guide for Selection of Substitute, Non-hazardous, Liquid Filling Substances for Packagings Subjected to the United Nations Performance Tests

    E171/E171M-11 Standard Practice for Conditioning and Testing Flexible Barrier Packaging

    E398-13 Standard Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement

    F17-13a Standard Terminology Relating to Flexible Barrier Packaging

    F34-13 Standard Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials

    F88/F88M-09 Standard Test Method for Seal Strength of Flexible Barrier Materials

    F99-07(2011) Standard Guide for Writing a Specification for Flexible Barrier Rollstock Materials

    F119-82(2008) Standard Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)

    F392/F392M-11 Standard Practice for Conditioning Flexible Barrier Materials for Flex Durability

    F874-98(2014) Standard Test Method for Temperature Measurement and Profiling for Microwave Susceptors

    F904-98(2008) Standard Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials

    F1115-95(2008)e1 Standard Test Method for Determining the Carbon Dioxide Loss of Beverage Containers

    F1140/F1140M-13 Standard Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages

    F1249-13 Standard Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor

    F1278-96(2008) Standard Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment

    F1306-90(2008)e1 Standard Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates

    F1307-14 Standard Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor

    F1308-98(2014) Standard Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products

    F1317-98(2012) Standard Test Method for Calibration of Microwave Ovens

    F1349-08(2014) Standard Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors

    F1416-96(2014) Standard Guide for Selection of Time-Temperature Indicators

    F1500-98(2014) Standard Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants

    F1519-98(2014) Standard Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products

    F1608-00(2009) Standard Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)

    F1884-04(2011) Standard Test Method for Determining Residual Solvents in Packaging Materials

    F1886/F1886M-09(2013) Standard Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection

    F1921/F1921M-12e1 Standard Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs

    F1927-14 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector

    F1929-12 Standard Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration

    F1980-07(2011) Standard Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices

    F2013-10 Standard Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector

    F2029-08 Standard Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength

    F2054/F2054M-13 Standard Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates

    F2095-07(2013) Standard Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates

    F2096-11 Standard Test Method for Detecting Gross Leaks in Packaging by Internal Pressurization (Bubble Test)

    F2097-14 Standard Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products

    F2203-13 Standard Test Method for Linear Measurement Using Precision Steel Rule

    F2217/F2217M-13 Standard Practice for Coating/Adhesive Weight Determination

    F2227-13 Standard Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Packaging Trays by CO2 Tracer Gas Method

    F2228-13 Standard Test Method for Non-Destructive Detection of Leaks in Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method

    F2250-13 Standard Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials

    F2251-13 Standard Test Method for Thickness Measurement of Flexible Packaging Material

    F2252/F2252M-13e1 Standard Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape

    F2338-09(2013) Standard Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method

    F2391-05(2011) Standard Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas

    F2475-11 Standard Guide for Biocompatibility Evaluation of Medical Device Packaging Materials

    F2476-13 Standard Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (CO2TR) Through Barrier Materials Using An Infrared Detector

    F2559/F2559M-06(2010)e1 Standard Guide for Writing a Specification for Sterilizable Peel Pouches

    F2622-08(2013) Standard Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors

    F2638-12 Standard Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier

    F2714-08(2013) Standard Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay

    F2824-10e1 Standard Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids

    F2825-10e1 Standard Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery

    F3004-13e1 Standard Test Method for Evaluation of Seal Quality and Integrity Using Airborne Ultrasound

    F3039-13 Standard Test Method for Detecting Leaks in Nonporous Packaging or Flexible Barrier Materials by Dye Penetration

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2014
       Standards: 205
       Pages: 1236

    - 2013
       Standards: 202
       Pages: 1212