ASTM Volume 08.04, January 2014

    Plastic Piping Systems

    Table of Contents

    D1598-02(2009) Standard Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure

    D1599-99(2011) Standard Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings

    D1785-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120

    D2122-98(2010) Standard Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings

    D2152-13 Standard Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion

    D2235-04(2011) Standard Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings

    D2239-12a Standard Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter

    D2241-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)

    D2290-12 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

    D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

    D2412-11 Standard Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading

    D2444-99(2010) Standard Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)

    D2464-13 Standard Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2466-13 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40

    D2467-13a Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80

    D2513-13 Standard Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings

    D2564-12 Standard Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems

    D2609-02(2008) Standard Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe

    D2657-07 Standard Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings

    D2661-11 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings

    D2665-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D2672-96a(2009) Standard Specification for Joints for IPS PVC Pipe Using Solvent Cement

    D2680-01(2009) Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping

    D2683-10e1 Standard Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing

    D2729-11 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D2737-12a Standard Specification for Polyethylene (PE) Plastic Tubing

    D2749-13 Standard Symbols for Dimensions of Plastic Pipe Fittings

    D2751-05 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings

    D2774-12 Standard Practice for Underground Installation of Thermoplastic Pressure Piping

    D2837-13 Standard Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products

    D2846/D2846M-09be1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems

    D2852-95(2008) Standard Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings

    D2855-96(2010) Standard Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings

    D2949-10 Standard Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings

    D3034-08 Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings

    D3035-12e2 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter

    D3122-95(2009) Standard Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings

    D3138-04(2011) Standard Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components

    D3139-98(2011) Standard Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals

    D3212-07(2013) Standard Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals

    D3261-12 Standard Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing

    D3311-11 Standard Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns

    D6070-02(2010) Standard Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable

    F402-05(2012) Standard Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings

    F405-13 Standard Specification for Corrugated Polyethylene (PE) Pipe and Fittings

    F409-12 Standard Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings

    F412-13 Standard Terminology Relating to Plastic Piping Systems

    F437-09 Standard Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

    F438-09 Standard Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40

    F439-13 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80

    F441/F441M-13e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80

    F442/F442M-13e1 Standard Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR–PR)

    F449-02(2008) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control

    F477-10 Standard Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F480-12 Standard Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80

    F481-97(2008) Standard Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields

    F493-10 Standard Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings

    F512-12 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation

    F585-13 Standard Guide for Insertion of Flexible Polyethylene Pipe Into Existing Sewers

    F610/F610M-10 Standard Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique

    F628-12e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core

    F645-13 Standard Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems

    F656-10 Standard Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings

    F667-12 Standard Specification for 3 through 24 in. Corrugated Polyethylene Pipe and Fittings

    F679-13a Standard Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings

    F689-97(2011) Standard Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings

    F714-13 Standard Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Outside Diameter

    F725-03(2013) Standard Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards

    F758-95(2007)e1 Standard Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage

    F794-03(2009) Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter

    F810-12 Standard Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields

    F876-13a Standard Specification for Crosslinked Polyethylene (PEX) Tubing

    F877-11a Standard Specification for Crosslinked Polyethylene (PEX) Hot- and Cold-Water Distribution Systems

    F891-10 Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core

    F894-13 Standard Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe

    F905-04(2011) Standard Practice for Qualification of Polyethylene Saddle-Fused Joints

    F913-02(2008) Standard Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe

    F948-94(2011) Standard Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow

    F949-10 Standard Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings

    F1025-94(2011) Standard Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe

    F1041-02(2008) Standard Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing

    F1055-13 Standard Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene and Crosslinked Polyethylene (PEX) Pipe and Tubing

    F1056-04(2011) Standard Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings

    F1057-10 Standard Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique

    F1216-09 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube

    F1281-11 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe

    F1282-10 Standard Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe

    F1290-98a(2011) Standard Practice for Electrofusion Joining Polyolefin Pipe and Fittings

    F1336-07 Standard Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings

    F1365-91(2013) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals

    F1412-09 Standard Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems

    F1417-11a Standard Practice for Installation Acceptance of Plastic Non-pressure Sewer Lines Using Low-Pressure Air

    F1429-99(2009) Standard Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell

    F1473-13 Standard Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins

    F1483-12 Standard Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe

    F1488-09e1 Standard Specification for Coextruded Composite Pipe

    F1498-08(2012)e1 Standard Specification for Taper Pipe Threads 60° for Thermoplastic Pipe and Fittings

    F1499-12 Standard Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)

    F1504-10 Standard Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation

    F1533-01(2009) Standard Specification for Deformed Polyethylene (PE) Liner

    F1545-97(2009) Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges

    F1563-01(2011) Standard Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing

    F1588-96(2011) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)

    F1606-05 Standard Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner

    F1668-08 Standard Guide for Construction Procedures for Buried Plastic Pipe

    F1673-10 Standard Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems

    F1674-11 Standard Test Method for Joint Restraint Products for Use with PVC Pipe

    F1675-13 Standard Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits

    F1697-09 Standard Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit

    F1698-02(2008) Standard Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits

    F1732-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material

    F1733-13 Standard Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing

    F1734-03(2009) Standard Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe

    F1735-09 Standard Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits

    F1741-08 Standard Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits

    F1743-08 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)

    F1759-97(2010) Standard Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications

    F1760-01(2011) Standard Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content

    F1802-04(2010) Standard Test Method for Performance Testing of Excess Flow Valves

    F1803-06 Standard Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter

    F1804-08(2012) Standard Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation

    F1807-13a Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

    F1865-09 Standard Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing

    F1866-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings

    F1867-06(2012) Standard Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation

    F1871-11 Standard Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation

    F1901-10 Standard Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems

    F1924-12 Standard Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F1947-10 Standard Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits

    F1948-12 Standard Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing

    F1960-12 Standard Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing

    F1961-09 Standard Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing

    F1962-11 Standard Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings

    F1970-12e1 Standard Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems

    F1973-13e1 Standard Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems

    F1974-09 Standard Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe

    F1986-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems

    F1987-01(2011) Standard Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems

    F2018-00(2010) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens

    F2019-11 Standard Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)

    F2021-11 Standard Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems

    F2023-13 Standard Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water

    F2080-12 Standard Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe

    F2098-08 Standard Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings

    F2135-01(2012) Standard Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings

    F2136-08 Standard Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe

    F2138-12 Standard Specification for Excess Flow Valves for Natural Gas Service

    F2145-13 Standard Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing

    F2159-11 Standard Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing

    F2160-10 Standard Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)

    F2164-13 Standard Practice for Field Leak Testing of Polyethylene (PE) and Crosslinked Polyethylene (PEX) Pressure Piping Systems Using Hydrostatic Pressure

    F2165-13 Standard Specification for Flexible Pre-Insulated Piping

    F2176-02(2009) Standard Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct

    F2206-11 Standard Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock

    F2207-06(2013) Standard Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe

    F2231-02(2013) Standard Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes

    F2261-06(2011) Standard Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type

    F2262-09 Standard Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9

    F2263-07(2011) Standard Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water

    F2306/F2306M-13 Standard Specification for 12 to 60 in. [300 to 1500 mm] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications

    F2331-11 Standard Test Method for Determining Chemical Compatibility of Substances in Contact with Thermoplastic Pipe and Fittings Materials

    F2389-10 Standard Specification for Pressure-rated Polypropylene (PP) Piping Systems

    F2390-12 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content

    F2418-13 Standard Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers

    F2433-05(2013) Standard Test Method for Determining Thermoplastic Pipe Wall Stiffness

    F2434-09 Standard Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing

    F2435-12 Standard Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe

    F2487-13 Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene and Polypropylene Pipelines

    F2509-12 Standard Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing

    F2510/F2510M-07(2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes

    F2536-06b(2011) Standard Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs

    F2561-11 Standard Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner

    F2562/F2562M-08 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage

    F2599-11 Standard Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner

    F2600-09 Standard Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing

    F2618-09 Standard Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems

    F2619/F2619M-11 Standard Specification for High-Density Polyethylene (PE) Line Pipe

    F2620-12 Standard Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings

    F2623-08 Standard Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing

    F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method

    F2648/F2648M-13 Standard Specification for 2 to 60 inch [50 to 1500 mm] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications

    F2649-08a Standard Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks

    F2657-07(2012) Standard Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing

    F2658-07(2013) Standard Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings

    F2686-10 Standard Specification for Glass Fiber Reinforced Thermoplastic Pipe

    F2718-09 Standard Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines

    F2719-09 Standard Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines

    F2720/F2720M-09 Standard Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe

    F2735-09 Standard Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing

    F2736-13 Standard Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe

    F2737-11 Standard Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units

    F2762-11e1 Standard Specification for 12 to 30 in. (300 to 750 mm) Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2763-11 Standard Specification for 30 to 60 in. [750 to 1500 mm] Triple Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2764/F2764M-11ae1 Standard Specification for 30 to 60 in. [750 to 1500 mm] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications

    F2767-12 Standard Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution

    F2768-09 Standard Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components

    F2769-10 Standard Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems

    F2785-12 Standard Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings

    F2786-10 Standard Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)

    F2787-13 Standard Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers

    F2788/F2788M-13 Standard Specification for Metric-sized Crosslinked Polyethylene (PEX) Pipe

    F2805-11 Standard Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections

    F2806-10e1 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)

    F2807-13 Standard Specification for Multilayer Polyethylene-Polyamide (PE-PA) Pipe for Pressure Piping Applications

    F2817-13 Standard Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair

    F2818-10 Standard Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

    F2829-10 Standard Specification for Metric-Sized Crosslinked Polyethylene (PEX) Pipe Systems

    F2830-11 Standard Specification for Manufacture and Joining of Polyethylene (PE) Gas Pressure Pipe With a Peelable Polypropylene (PP) Outer Layer

    F2831-12 Standard Practice for Internal Non Structural Epoxy Barrier Coating Material Used In Rehabilitation of Metallic Pressurized Piping Systems

    F2854-10 Standard Specification for Push-Fit Crosslinked Polyethylene (PEX) Mechanical Fittings for Crosslinked Polyethylene (PEX) Tubing

    F2855-12 Standard Specification for Chlorinated Poly(Vinyl Chloride)/Aluminum/Chlorinated Poly(Vinyl Chloride) (CPVC-AL-CPVC) Composite Pressure Tubing

    F2880-11a Standard Specification for Lap-Joint Type Flange Adapters for Polyethylene Pressure Pipe in Nominal Pipe Sizes ¾ in. to 65 in.

    F2881-11 Standard Specification for 12 to 60 in. [300 to 1500 mm] Polypropylene (PP) Dual Wall Pipe and Fittings for Non-Pressure Storm Sewer Applications

    F2896-11 Standard Specification for Reinforced Polyethylene Composite Pipe For The Transport Of Oil And Gas And Hazardous Liquids

    F2897-11ae1 Standard Specification for Tracking and Traceability Encoding System of Natural Gas Distribution Components (Pipe, Tubing, Fittings, Valves, and Appurtenances)

    F2905/F2905M-13 Standard Specification for Black Crosslinked Polyethylene (PEX) Line Pipe, Fittings and Joints For Oil and Gas Producing Applications

    F2922-13e1 Standard Specification for Polyethylene (PE) Corrugated Wall Stormwater Collection Chambers

    F2928-13 Standard Practice for Specimens and Testing Conditions for Testing Polyethylene (PE) Pipe Butt Fusions Using Tensile and Hydrostatic Test Methods

    F2929-13 Standard Specification for Crosslinked Polyethylene (PEX) Tubing of 0.070 in. Wall and Fittings for Radiant Heating Systems up to 75 psig

    F2945-12a Standard Specification for Polyamide 11 Gas Pressure Pipe, Tubing, and Fittings

    F2946-12 Standard Specification for PVC Hub and Elastomeric Seal (Gasket) Tee Connection for Joining Plastic Pipe to Insitu Pipelines and Manholes

    F2947-12e1 Standard Specification for 150 to 1500 mm [6 to 60 in.] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Sanitary Sewer Applications

    F2969-12 Standard Specification for Acrylonitrile-Butadiene-Styrene (ABS) IPS Dimensioned Pressure Pipe

    F2986-12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Leachate Applications

    F2987-12 Standard Specification for Corrugated Polyethylene Pipe and Fittings for Mine Heap Leach Aeration Applications

    F2994-13 Standard Practice for Utilization of Mobile, Automated Cured-In-Place Pipe (CIPP) Impregnation Systems

    F3034-13 Standard Specification for Billets made by Winding Molten Extruded Stress-Rated High Density Polyethylene (HDPE)

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2014
       Standards: 226
       Pages: 1708

    - 2013
       Standards: 225
       Pages: 1660