ASTM Volume 05.01, February 2014

    Petroleum Products and Lubricants (I): C1234-D3710

    Table of Contents

    C1234-11 Standard Practice for Preparation of Oils and Oily Waste Samples by High-Pressure, High-Temperature Digestion for Trace Element Determinations

    D56-05(2010) Standard Test Method for Flash Point by Tag Closed Cup Tester

    D61-75(2010) Standard Test Method for Softening Point of Pitches (Cube-in-Water Method)

    D71-94(2009) Standard Test Method for Relative Density of Solid Pitch and Asphalt (Displacement Method)

    D86-12 Standard Test Method for Distillation of Petroleum Products at Atmospheric Pressure

    D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)

    D91-02(2012) Standard Test Method for Precipitation Number of Lubricating Oils

    D92-12b Standard Test Method for Flash and Fire Points by Cleveland Open Cup Tester

    D93-13 Standard Test Methods for Flash Point by Pensky-Martens Closed Cup Tester

    D94-07(2012) Standard Test Methods for Saponification Number of Petroleum Products

    D95-13e1 Standard Test Method for Water in Petroleum Products and Bituminous Materials by Distillation

    D97-12 Standard Test Method for Pour Point of Petroleum Products

    D127-08 Standard Test Method for Drop Melting Point of Petroleum Wax, Including Petrolatum

    D128-98(2008) Standard Test Methods for Analysis of Lubricating Grease

    D129-13 Standard Test Method for Sulfur in Petroleum Products (General High Pressure Decomposition Device Method)

    D130-12 Standard Test Method for Corrosiveness to Copper from Petroleum Products by Copper Strip Test

    D156-12 Standard Test Method for Saybolt Color of Petroleum Products (Saybolt Chromometer Method)

    D187-08(2013) Standard Test Method for Burning Quality of Kerosine

    D189-06(2010)e1 Standard Test Method for Conradson Carbon Residue of Petroleum Products

    D217-10 Standard Test Methods for Cone Penetration of Lubricating Grease

    D240-09 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter

    D287-12b Standard Test Method for API Gravity of Crude Petroleum and Petroleum Products (Hydrometer Method)

    D322-97(2012) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Distillation

    D323-08 Standard Test Method for Vapor Pressure of Petroleum Products (Reid Method)

    D341-09 Standard Practice for Viscosity-Temperature Charts for Liquid Petroleum Products

    D381-12 Standard Test Method for Gum Content in Fuels by Jet Evaporation

    D396-13c Standard Specification for Fuel Oils

    D445-12 Standard Test Method for Kinematic Viscosity of Transparent and Opaque Liquids (and Calculation of Dynamic Viscosity)

    D446-12 Standard Specifications and Operating Instructions for Glass Capillary Kinematic Viscometers

    D473-07(2012) Standard Test Method for Sediment in Crude Oils and Fuel Oils by the Extraction Method

    D482-13 Standard Test Method for Ash from Petroleum Products

    D483-04(2009)e1 Standard Test Method for Unsulfonated Residue of Petroleum Plant Spray Oils

    D524-10 Standard Test Method for Ramsbottom Carbon Residue of Petroleum Products

    D525-12a Standard Test Method for Oxidation Stability of Gasoline (Induction Period Method)

    D565-99(2013) Standard Test Method for Carbonizable Substances in White Mineral Oil

    D566-02(2009) Standard Test Method for Dropping Point of Lubricating Grease

    D611-12 Standard Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents

    D612-88(2012) Standard Test Method for Carbonizable Substances in Paraffin Wax

    D664-11a Standard Test Method for Acid Number of Petroleum Products by Potentiometric Titration

    D665-12 Standard Test Method for Rust-Preventing Characteristics of Inhibited Mineral Oil in the Presence of Water

    D721-06(2011) Standard Test Method for Oil Content of Petroleum Waxes

    D808-11 Standard Test Method for Chlorine in New and Used Petroleum Products (High Pressure Decomposition Device Method)

    D873-12 Standard Test Method for Oxidation Stability of Aviation Fuels (Potential Residue Method)

    D874-13a Standard Test Method for Sulfated Ash from Lubricating Oils and Additives

    D892-13 Standard Test Method for Foaming Characteristics of Lubricating Oils

    D893-12 Standard Test Method for Insolubles in Used Lubricating Oils

    D910-13a Standard Specification for Aviation Gasolines

    D937-07(2012) Standard Test Method for Cone Penetration of Petrolatum

    D938-12 Standard Test Method for Congealing Point of Petroleum Waxes, Including Petrolatum

    D942-02(2007) Standard Test Method for Oxidation Stability of Lubricating Greases by the Oxygen Pressure Vessel Method

    D943-04a(2010)e1 Standard Test Method for Oxidation Characteristics of Inhibited Mineral Oils

    D972-02(2008) Standard Test Method for Evaporation Loss of Lubricating Greases and Oils

    D974-12 Standard Test Method for Acid and Base Number by Color-Indicator Titration

    D975-13a Standard Specification for Diesel Fuel Oils

    D976-06(2011) Standard Test Method for Calculated Cetane Index of Distillate Fuels

    D1015-05(2010) Standard Test Method for Freezing Points of High-Purity Hydrocarbons

    D1016-05(2010) Standard Test Method for Purity of Hydrocarbons from Freezing Points

    D1018-11 Standard Test Method for Hydrogen In Petroleum Fractions

    D1025-10 Standard Test Method for Nonvolatile Residue of Polymerization Grade Butadiene

    D1091-11 Standard Test Methods for Phosphorus in Lubricating Oils and Additives

    D1092-12 Standard Test Method for Measuring Apparent Viscosity of Lubricating Greases

    D1093-11 Standard Test Method for Acidity of Hydrocarbon Liquids and Their Distillation Residues

    D1094-07(2013) Standard Test Method for Water Reaction of Aviation Fuels

    D1157-91(2009) Standard Test Method for Total Inhibitor Content (TBC) of Light Hydrocarbons

    D1159-07(2012) Standard Test Method for Bromine Numbers of Petroleum Distillates and Commercial Aliphatic Olefins by Electrometric Titration

    D1160-13 Standard Test Method for Distillation of Petroleum Products at Reduced Pressure

    D1217-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Liquids by Bingham Pycnometer

    D1218-12 Standard Test Method for Refractive Index and Refractive Dispersion of Hydrocarbon Liquids

    D1250-08(2013) Standard Guide for Use of the Petroleum Measurement Tables

    D1264-12 Standard Test Method for Determining the Water Washout Characteristics of Lubricating Greases

    D1265-11 Standard Practice for Sampling Liquefied Petroleum (LP) Gases, Manual Method

    D1266-13 Standard Test Method for Sulfur in Petroleum Products (Lamp Method)

    D1267-12 Standard Test Method for Gage Vapor Pressure of Liquefied Petroleum (LP) Gases (LP-Gas Method)

    D1298-12b Standard Test Method for Density, Relative Density, or API Gravity of Crude Petroleum and Liquid Petroleum Products by Hydrometer Method

    D1318-00(2011) Standard Test Method for Sodium in Residual Fuel Oil (Flame Photometric Method)

    D1319-13 Standard Test Method for Hydrocarbon Types in Liquid Petroleum Products by Fluorescent Indicator Adsorption

    D1321-10 Standard Test Method for Needle Penetration of Petroleum Waxes

    D1322-12e1 Standard Test Method for Smoke Point of Kerosine and Aviation Turbine Fuel

    D1401-12 Standard Test Method for Water Separability of Petroleum Oils and Synthetic Fluids

    D1403-10 Standard Test Methods for Cone Penetration of Lubricating Grease Using One-Quarter and One-Half Scale Cone Equipment

    D1404/D1404M-99(2008) Standard Test Method for Estimation of Deleterious Particles in Lubricating Grease

    D1405/D1405M-08(2013) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D1465-10 Standard Test Method for Blocking and Picking Points of Petroleum Wax

    D1478-11 Standard Test Method for Low-Temperature Torque of Ball Bearing Grease

    D1480-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Bingham Pycnometer

    D1481-12 Standard Test Method for Density and Relative Density (Specific Gravity) of Viscous Materials by Lipkin Bicapillary Pycnometer

    D1500-12 Standard Test Method for ASTM Color of Petroleum Products (ASTM Color Scale)

    D1550-94(2009) Standard ASTM Butadiene Measurement Tables

    D1552-08 Standard Test Method for Sulfur in Petroleum Products (High-Temperature Method)

    D1655-13a Standard Specification for Aviation Turbine Fuels

    D1657-12e1 Standard Test Method for Density or Relative Density of Light Hydrocarbons by Pressure Hydrometer

    D1662-08 Standard Test Method for Active Sulfur in Cutting Oils

    D1742-06(2013) Standard Test Method for Oil Separation from Lubricating Grease During Storage

    D1743-13 Standard Test Method for Determining Corrosion Preventive Properties of Lubricating Greases

    D1747-09 Standard Test Method for Refractive Index of Viscous Materials

    D1748-10 Standard Test Method for Rust Protection by Metal Preservatives in the Humidity Cabinet

    D1796-11e1 Standard Test Method for Water and Sediment in Fuel Oils by the Centrifuge Method (Laboratory Procedure)

    D1831-11 Standard Test Method for Roll Stability of Lubricating Grease

    D1832-04(2009) Standard Test Method for Peroxide Number of Petroleum Wax

    D1833-87(2012) Standard Test Method for Odor of Petroleum Wax

    D1835-13 Standard Specification for Liquefied Petroleum (LP) Gases

    D1837-11 Standard Test Method for Volatility of Liquefied Petroleum (LP) Gases

    D1838-12a Standard Test Method for Copper Strip Corrosion by Liquefied Petroleum (LP) Gases

    D1839-11 Standard Test Method for Amyl Nitrate in Diesel Fuels

    D1840-07(2013) Standard Test Method for Naphthalene Hydrocarbons in Aviation Turbine Fuels by Ultraviolet Spectrophotometry

    D2001-07(2012) Standard Test Method for Depentanization of Gasoline and Naphthas

    D2007-11 Standard Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method

    D2008-12 Standard Test Method for Ultraviolet Absorbance and Absorptivity of Petroleum Products

    D2068-13 Standard Test Method for Determining Filter Blocking Tendency

    D2070-91(2010) Standard Test Method for Thermal Stability of Hydraulic Oils

    D2155-12 Standard Test Method for Determination of Fire Resistance of Aircraft Hydraulic Fluids by Autoignition Temperature

    D2156-09(2013) Standard Test Method for Smoke Density in Flue Gases from Burning Distillate Fuels

    D2157-94(2013) Standard Test Method for Effect of Air Supply on Smoke Density in Flue Gases from Burning Distillate Fuels

    D2158-11 Standard Test Method for Residues in Liquefied Petroleum (LP) Gases

    D2161-10 Standard Practice for Conversion of Kinematic Viscosity to Saybolt Universal Viscosity or to Saybolt Furol Viscosity

    D2162-13 Standard Practice for Basic Calibration of Master Viscometers and Viscosity Oil Standards

    D2163-07 Standard Test Method for Determination of Hydrocarbons in Liquefied Petroleum (LP) Gases and Propane/Propene Mixtures by Gas Chromatography

    D2265-06 Standard Test Method for Dropping Point of Lubricating Grease Over Wide Temperature Range

    D2266-01(2008) Standard Test Method for Wear Preventive Characteristics of Lubricating Grease (Four-Ball Method)

    D2268-93(2013) Standard Test Method for Analysis of High-Purity n-Heptane and Isooctane by Capillary Gas Chromatography

    D2269-10 Standard Test Method for Evaluation of White Mineral Oils by Ultraviolet Absorption

    D2270-10e1 Standard Practice for Calculating Viscosity Index From Kinematic Viscosity at 40 and 100°C

    D2272-11 Standard Test Method for Oxidation Stability of Steam Turbine Oils by Rotating Pressure Vessel

    D2273-08(2012) Standard Test Method for Trace Sediment in Lubricating Oils

    D2274-10 Standard Test Method for Oxidation Stability of Distillate Fuel Oil (Accelerated Method)

    D2276-06 Standard Test Method for Particulate Contaminant in Aviation Fuel by Line Sampling

    D2318-98(2013) Standard Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch

    D2319/D2319M-98(2013) Standard Test Method for Softening Point of Pitch (Cube-in-Air Method)

    D2320-98(2012) Standard Test Method for Density (Relative Density) of Solid Pitch (Pycnometer Method)

    D2384-83(2009) Standard Test Methods for Traces of Volatile Chlorides in Butane-Butene Mixtures

    D2386-06(2012) Standard Test Method for Freezing Point of Aviation Fuels

    D2392-96(2011) Standard Test Method for Color Of Dyed Aviation Gasolines

    D2415-98(2012) Standard Test Method for Ash in Coal Tar and Pitch

    D2416-84(2009) Standard Test Method for Coking Value of Tar and Pitch (Modified Conradson)

    D2420-13 Standard Test Method for Hydrogen Sulfide in Liquefied Petroleum (LP) Gases (Lead Acetate Method)

    D2421-13 Standard Practice for Interconversion of Analysis of C5 and Lighter Hydrocarbons to Gas-Volume, Liquid-Volume, or Mass Basis

    D2422-97(2013) Standard Classification of Industrial Fluid Lubricants by Viscosity System

    D2423-90(2012)e1 Standard Test Method for Surface Wax on Waxed Paper or Paperboard

    D2425-04(2009) Standard Test Method for Hydrocarbon Types in Middle Distillates by Mass Spectrometry

    D2426-93(2009) Standard Test Method for Butadiene Dimer and Styrene in Butadiene Concentrates by Gas Chromatography

    D2427-06(2011) Standard Test Method for Determination of C2 through C5 Hydrocarbons in Gasolines by Gas Chromatography

    D2500-11 Standard Test Method for Cloud Point of Petroleum Products

    D2501-11 Standard Test Method for Calculation of Viscosity-Gravity Constant (VGC) of Petroleum Oils

    D2502-04(2009) Standard Test Method for Estimation of Molecular Weight (Relative Molecular Mass) of Petroleum Oils From Viscosity Measurements

    D2503-92(2012) Standard Test Method for Relative Molecular Mass (Molecular Weight) of Hydrocarbons by Thermoelectric Measurement of Vapor Pressure

    D2504-88(2010) Standard Test Method for Noncondensable Gases in C2 and Lighter Hydrocarbon Products by Gas Chromatography

    D2505-88(2010) Standard Test Method for Ethylene, Other Hydrocarbons, and Carbon Dioxide in High-Purity Ethylene by Gas Chromatography

    D2509-03(2008) Standard Test Method for Measurement of Load-Carrying Capacity of Lubricating Grease (Timken Method)

    D2510-94(2012) Standard Test Method for Adhesion of Solid Film Lubricants

    D2511-93(2009) Standard Test Method for Thermal Shock Sensitivity of Solid Film Lubricants

    D2532-10 Standard Test Method for Viscosity and Viscosity Change After Standing at Low Temperature of Aircraft Turbine Lubricants

    D2534-88(2012) Standard Test Method for Coefficient of Kinetic Friction for Wax Coatings

    D2549-02(2012) Standard Test Method for Separation of Representative Aromatics and Nonaromatics Fractions of High-Boiling Oils by Elution Chromatography

    D2593-93(2009) Standard Test Method for Butadiene Purity and Hydrocarbon Impurities by Gas Chromatography

    D2595-96(2008)e1 Standard Test Method for Evaporation Loss of Lubricating Greases Over Wide-Temperature Range

    D2596-10 Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Grease (Four-Ball Method)

    D2597-10 Standard Test Method for Analysis of Demethanized Hydrocarbon Liquid Mixtures Containing Nitrogen and Carbon Dioxide by Gas Chromatography

    D2598-12 Standard Practice for Calculation of Certain Physical Properties of Liquefied Petroleum (LP) Gases from Compositional Analysis

    D2603-01(2013) Standard Test Method for Sonic Shear Stability of Polymer-Containing Oils

    D2619-09 Standard Test Method for Hydrolytic Stability of Hydraulic Fluids (Beverage Bottle Method)

    D2622-10 Standard Test Method for Sulfur in Petroleum Products by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D2624-09 Standard Test Methods for Electrical Conductivity of Aviation and Distillate Fuels

    D2625-94(2010) Standard Test Method for Endurance (Wear) Life and Load-Carrying Capacity of Solid Film Lubricants (Falex Pin and Vee Method)

    D2638-10 Standard Test Method for Real Density of Calcined Petroleum Coke by Helium Pycnometer

    D2649-04(2009) Standard Test Method for Corrosion Characteristics of Solid Film Lubricants

    D2650-10 Standard Test Method for Chemical Composition of Gases By Mass Spectrometry

    D2669-06(2012)e1 Standard Test Method for Apparent Viscosity of Petroleum Waxes Compounded with Additives (Hot Melts)

    D2670-95(2010) Standard Test Method for Measuring Wear Properties of Fluid Lubricants (Falex Pin and Vee Block Method)

    D2709-96(2011)e1 Standard Test Method for Water and Sediment in Middle Distillate Fuels by Centrifuge

    D2710-09(2013) Standard Test Method for Bromine Index of Petroleum Hydrocarbons by Electrometric Titration

    D2711-11 Standard Test Method for Demulsibility Characteristics of Lubricating Oils

    D2712-91(2010) Standard Test Method for Hydrocarbon Traces in Propylene Concentrates By Gas Chromatography

    D2713-13 Standard Test Method for Dryness of Propane (Valve Freeze Method)

    D2714-94(2009) Standard Test Method for Calibration and Operation of the Falex Block-on-Ring Friction and Wear Testing Machine

    D2715-92(2012) Standard Test Method for Volatilization Rates of Lubricants in Vacuum

    D2717-95(2009) Standard Test Method for Thermal Conductivity of Liquids

    D2764-99(2009) Standard Test Method for Dimethylformamide-Insoluble (DMF-I) Content of Tar and Pitch

    D2766-95(2009) Standard Test Method for Specific Heat of Liquids and Solids

    D2779-92(2012) Standard Test Method for Estimation of Solubility of Gases in Petroleum Liquids

    D2782-02(2008) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Timken Method)

    D2783-03(2009) Standard Test Method for Measurement of Extreme-Pressure Properties of Lubricating Fluids (Four-Ball Method)

    D2784-11 Standard Test Method for Sulfur in Liquefied Petroleum Gases (Oxy-Hydrogen Burner or Lamp)

    D2786-91(2011) Standard Test Method for Hydrocarbon Types Analysis of Gas-Oil Saturates Fractions by High Ionizing Voltage Mass Spectrometry

    D2789-95(2011) Standard Test Method for Hydrocarbon Types in Low Olefinic Gasoline by Mass Spectrometry

    D2878-10 Standard Test Method for Estimating Apparent Vapor Pressures and Molecular Weights of Lubricating Oils

    D2879-10 Standard Test Method for Vapor Pressure-Temperature Relationship and Initial Decomposition Temperature of Liquids by Isoteniscope

    D2880-13b Standard Specification for Gas Turbine Fuel Oils

    D2883-95(2009) Standard Test Method for Reaction Threshold Temperature of Liquid and Solid Materials

    D2884-93(2012) Standard Test Method for Yield Stress of Heterogeneous Propellants by Cone Penetration Method

    D2887-13 Standard Test Method for Boiling Range Distribution of Petroleum Fractions by Gas Chromatography

    D2889-95(2010) Standard Test Method for Calculation of True Vapor Pressures of Petroleum Distillate Fuels

    D2890-92(2013) Standard Test Method for Calculation of Liquid Heat Capacity of Petroleum Distillate Fuels

    D2892-13 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

    D2893-04(2009) Standard Test Method for Oxidation Characteristics of Extreme-Pressure Lubrication Oils

    D2896-11 Standard Test Method for Base Number of Petroleum Products by Potentiometric Perchloric Acid Titration

    D2962-10 Standard Practice for Calculating Volume-Temperature Correction For Coal-Tar Pitches

    D2981-94(2009) Standard Test Method for Wear Life of Solid Film Lubricants in Oscillating Motion

    D2982-07(2013) Standard Test Methods for Detecting Glycol-Base Antifreeze in Used Lubricating Oils

    D2983-09 Standard Test Method for Low-Temperature Viscosity of Lubricants Measured by Brookfield Viscometer

    D3104-99(2010) Standard Test Method for Softening Point of Pitches (Mettler Softening Point Method)

    D3115-95(2009) Standard Test Method for Explosive Reactivity of Lubricants with Aerospace Alloys Under High Shear

    D3120-08 Standard Test Method for Trace Quantities of Sulfur in Light Liquid Petroleum Hydrocarbons by Oxidative Microcoulometry

    D3227-13 Standard Test Method for (Thiol Mercaptan) Sulfur in Gasoline, Kerosine, Aviation Turbine, and Distillate Fuels (Potentiometric Method)

    D3228-08 Standard Test Method for Total Nitrogen in Lubricating Oils and Fuel Oils by Modified Kjeldahl Method

    D3230-13 Standard Test Method for Salts in Crude Oil (Electrometric Method)

    D3231-13 Standard Test Method for Phosphorus in Gasoline

    D3233-93(2009)e1 Standard Test Methods for Measurement of Extreme Pressure Properties of Fluid Lubricants (Falex Pin and Vee Block Methods)

    D3235-06(2011) Standard Test Method for Solvent Extractables in Petroleum Waxes

    D3236-88(2009) Standard Test Method for Apparent Viscosity of Hot Melt Adhesives and Coating Materials

    D3237-12 Standard Test Method for Lead in Gasoline by Atomic Absorption Spectroscopy

    D3238-95(2010) Standard Test Method for Calculation of Carbon Distribution and Structural Group Analysis of Petroleum Oils by the n-d-M Method

    D3239-91(2011) Standard Test Method for Aromatic Types Analysis of Gas-Oil Aromatic Fractions by High Ionizing Voltage Mass Spectrometry

    D3240-11 Standard Test Method for Undissolved Water In Aviation Turbine Fuels

    D3241-13 Standard Test Method for Thermal Oxidation Stability of Aviation Turbine Fuels

    D3242-11 Standard Test Method for Acidity in Aviation Turbine Fuel

    D3244-12 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications

    D3246-11 Standard Test Method for Sulfur in Petroleum Gas by Oxidative Microcoulometry

    D3336-05(2010) Standard Test Method for Life of Lubricating Greases in Ball Bearings at Elevated Temperatures

    D3338/D3338M-09 Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D3339-12 Standard Test Method for Acid Number of Petroleum Products by Semi-Micro Color Indicator Titration

    D3341-05(2011) Standard Test Method for Lead in Gasoline - Iodine Monochloride Method

    D3342-90(2012) Standard Test Method for Dispersion Stability of New (Unused) Rolling Oil Dispersions in Water

    D3343-05(2010) Standard Test Method for Estimation of Hydrogen Content of Aviation Fuels

    D3344-90(2010) Standard Test Method for Total Wax Content of Corrugated Paperboard

    D3348-12 Standard Test Method for Rapid Field Test for Trace Lead in Unleaded Gasoline (Colorimetric Method)

    D3427-12 Standard Test Method for Air Release Properties of Petroleum Oils

    D3429-93(2012) Standard Test Method for Solubility of Fixed Gases in Low-Boiling Liquids

    D3461-97(2012) Standard Test Method for Softening Point of Asphalt and Pitch (Mettler Cup-and-Ball Method)

    D3521-86(2012) Standard Test Method for Surface Wax Coating On Corrugated Board

    D3523-92(2012) Standard Test Method for Spontaneous Heating Values of Liquids and Solids (Differential Mackey Test)

    D3525-04(2010) Standard Test Method for Gasoline Diluent in Used Gasoline Engine Oils by Gas Chromatography

    D3527-11 Standard Test Method for Life Performance of Automotive Wheel Bearing Grease

    D3603-07 Standard Test Method for Rust-Preventing Characteristics of Steam Turbine Oil in the Presence of Water (Horizontal Disk Method)

    D3605-00(2011) Standard Test Method for Trace Metals in Gas Turbine Fuels by Atomic Absorption and Flame Emission Spectroscopy

    D3606-10 Standard Test Method for Determination of Benzene and Toluene in Finished Motor and Aviation Gasoline by Gas Chromatography

    D3607-08(2012) Standard Test Method for Removing Volatile Contaminants from Used Engine Oils by Stripping

    D3699-13b Standard Specification for Kerosine

    D3700-12 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder

    D3701-01(2012) Standard Test Method for Hydrogen Content of Aviation Turbine Fuels by Low Resolution Nuclear Magnetic Resonance Spectrometry

    D3702-94(2009) Standard Test Method for Wear Rate and Coefficient of Friction of Materials in Self-Lubricated Rubbing Contact Using a Thrust Washer Testing Machine

    D3703-13 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels, Gasoline and Diesel Fuels

    D3704-96(2012) Standard Test Method for Wear Preventive Properties of Lubricating Greases Using the (Falex) Block on Ring Test Machine in Oscillating Motion

    D3705-86(2009) Standard Test Method for Misting Properties of Lubricating Fluids

    D3707-89(2010) Standard Test Method for Storage Stability of Water-in-Oil Emulsions by the Oven Test Method

    D3708-88(2010) Standard Test Method for Weight of Wax Applied During Curtain Coating Operation

    D3709-89(2010) Standard Test Method for Stability of Water-in-Oil Emulsions Under Low to Ambient Temperature Cycling Conditions

    D3710-95(2009) Standard Test Method for Boiling Range Distribution of Gasoline and Gasoline Fractions by Gas Chromatography

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2014
       Standards: 281
       Pages: 1844

    - 2013
       Standards: 252
       Pages: 1804