ASTM Volume 04.07, November 2014

    Building Seals and Sealants; Fire Standards; Dimension Stone

    Table of Contents

    C97/C97M-09 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

    C99/C99M-09 Standard Test Method for Modulus of Rupture of Dimension Stone

    C119-11 Standard Terminology Relating to Dimension Stone

    C120/C120M-12 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)

    C121/C121M-09e1 Standard Test Method for Water Absorption of Slate

    C170/C170M-14 Standard Test Method for Compressive Strength of Dimension Stone

    C217/C217M-09 Standard Test Method for Weather Resistance of Slate

    C241/C241M-13 Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

    C406/C406M-10 Standard Specification for Roofing Slate

    C503/C503M-10 Standard Specification for Marble Dimension Stone

    C509-06(2011) Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C510-05a(2011) Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C542-05(2011) Standard Specification for Lock-Strip Gaskets

    C568/C568M-10 Standard Specification for Limestone Dimension Stone

    C603-14 Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C615/C615M-11 Standard Specification for Granite Dimension Stone

    C616/C616M-10 Standard Specification for Quartz-Based Dimension Stone

    C629/C629M-10 Standard Specification for Slate Dimension Stone

    C639-01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C679-03(2009)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C681-14 Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C711-14 Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712-03(2009) Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C716-06(2011) Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C717-14a Standard Terminology of Building Seals and Sealants

    C719-14 Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C731-00(2010) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C732-06(2012) Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

    C734-06(2012) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

    C736-12 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

    C765-97(2011) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C771-14 Standard Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants

    C772-03(2014) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C782-13 Standard Test Method for Softness of Preformed Tape Sealants

    C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C793-05(2010) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

    C794-10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C834-14 Standard Specification for Latex Sealants

    C864-05(2011) Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C879-03(2014) Standard Test Methods for Release Papers Used with Preformed Tape Sealants

    C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone

    C907-03(2012) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

    C908-00(2011) Standard Test Method for Yield Strength of Preformed Tape Sealants

    C910-06(2011) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

    C919-12 Standard Practice for Use of Sealants in Acoustical Applications

    C920-14a Standard Specification for Elastomeric Joint Sealants

    C961-06(2011) Standard Test Method for Lap Shear Strength of Sealants

    C963-00(2012) Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

    C964-07(2012) Standard Guide for Lock-Strip Gasket Glazing

    C972-00(2011) Standard Test Method for Compression-Recovery of Tape Sealant

    C1016-14 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1021-08(2014) Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1083-06(2011) Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

    C1087-00(2011) Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1115-06(2011) Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1135-00(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1166-06(2011) Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

    C1183/C1183M-13 Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1184-14 Standard Specification for Structural Silicone Sealants

    C1193-13 Standard Guide for Use of Joint Sealants

    C1201/C1201M-09 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

    C1216/C1216M-13 Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

    C1241-14 Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1242-14 Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

    C1246-00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1247-14 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1248-08(2012) Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1249-06a(2010) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1253-14 Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1257-06a(2012) Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

    C1265-94(2011) Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

    C1266-02(2011) Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1281-14 Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1294-07(2011) Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1311-14 Standard Specification for Solvent Release Sealants

    C1330-02(2013) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants

    C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

    C1353/C1353M-09e1 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser

    C1354/C1354M-09 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

    C1367-06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

    C1369-07(2014) Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1375-00(2014) Standard Guide for Substrates Used in Testing Building Seals and Sealants

    C1382-11 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1392-00(2014) Standard Guide for Evaluating Failure of Structural Sealant Glazing

    C1394-03(2012) Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1401-14 Standard Guide for Structural Sealant Glazing

    C1442-14 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    C1472-10 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1481-12 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1487-02(2012) Standard Guide for Remedying Structural Silicone Glazing

    C1496-11 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

    C1501-14 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1515-14 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

    C1518-04(2009) Standard Specification for Precured Elastomeric Silicone Joint Sealants

    C1519-10 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

    C1520-02(2010) Standard Guide for Paintability of Latex Sealants

    C1521-13 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1523-10 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

    C1526-08(2014) Standard Specification for Serpentine Dimension Stone

    C1527/C1527M-11 Standard Specification for Travertine Dimension Stone

    C1528-13 Standard Guide for Selection of Dimension Stone

    C1536-10 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

    C1564-04(2009) Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    C1589/C1589M-14 Standard Practice for Outdoor Weathering of Construction Seals and Sealants

    C1620-12 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

    C1635-06 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

    C1642-07 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

    C1643-14 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

    C1681-14 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

    C1721-09 Standard Guide for Petrographic Examination of Dimension Stone

    C1722-11 Standard Guide for Repair and Restoration of Dimension Stone

    C1735-11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C1736-11 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

    C1737-10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

    C1756-14 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    C1799/C1799M-14 Standard Guide to Dimension Stone Test Specimen Sampling and Preparation

    D2202-00(2010) Standard Test Method for Slump of Sealants

    D2203-01(2011) Standard Test Method for Staining from Sealants

    D2377-14 Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2452-03(2009) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453-03(2009) Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    D2859-06(2011) Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

    E84-14 Standard Test Method for Surface Burning Characteristics of Building Materials

    E108-11 Standard Test Methods for Fire Tests of Roof Coverings

    E119-12a Standard Test Methods for Fire Tests of Building Construction and Materials

    E136-12 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

    E162-13 Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

    E176-14b Standard Terminology of Fire Standards

    E535-14 Standard Practice for Preparation of Fire-Test-Response Standards

    E603-13 Standard Guide for Room Fire Experiments

    E648-14c Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

    E662-14 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

    E800-07 Standard Guide for Measurement of Gases Present or Generated During Fires

    E814-13a Standard Test Method for Fire Tests of Penetration Firestop Systems

    E906/E906M-14 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

    E970-14 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

    E1317-12 Standard Test Method for Flammability of Marine Surface Finishes

    E1321-13 Standard Test Method for Determining Material Ignition and Flame Spread Properties

    E1352-08a Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

    E1353-08ae1 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

    E1354-14e1 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

    E1355-12 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models

    E1474-14 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter

    E1529-13 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

    E1537-13 Standard Test Method for Fire Testing of Upholstered Furniture

    E1546-09a Standard Guide for Development of Fire-Hazard-Assessment Standards

    E1590-13 Standard Test Method for Fire Testing of Mattresses

    E1591-13 Standard Guide for Obtaining Data for Fire Growth Models

    E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

    E1678-10 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis

    E1725-14 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components

    E1740-10 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter

    E1776-13 Standard Guide for Development of Fire-Risk-Assessment Standards

    E1822-13 Standard Test Method for Fire Testing of Stacked Chairs

    E1966-07(2011) Standard Test Method for Fire-Resistive Joint Systems

    E1995-12 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally

    E2032-09(2013) Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E?119

    E2058-13a Standard Test Methods for Measurement of Material Flammability Using a Fire Propagation Apparatus (FPA)

    E2061-12 Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles

    E2067-12 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests

    E2102-14 Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater

    E2187-09 Standard Test Method for Measuring the Ignition Strength of Cigarettes

    E2203-14 Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    E2226-12 Standard Practice for Application of Hose Stream

    E2230-13 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material

    E2231-14 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

    E2257-13a Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies

    E2280-13 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities

    E2307-10 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus

    E2335-12 Standard Guide for Laboratory Monitors

    E2336-14 Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

    E2404-13e1 Standard Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings, and of Facings and Wood Veneers Intended to be Applied on Site Over a Wood Substrate, to Assess Surface Burning Charact

    E2536-14 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

    E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

    E2574/E2574M-12a Standard Test Method for Fire Testing of School Bus Seat Assemblies

    E2579-13 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

    E2599-11 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

    E2632/E2632M-13e1 Standard Test Method for Evaluating the Under-Deck Fire Test Response of Deck Materials

    E2652-12 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

    E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories

    E2688-10 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

    E2690-10e2 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

    E2707-14 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure

    E2726/E2726M-12a Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands

    E2748-12a Standard Guide for Fire-Resistance Experiments

    E2749-10(2014) Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

    E2750-13e1 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM

    E2768-11 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

    E2816-13a Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems

    E2837-13 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies

    E2886/E2886M-14 Standard Test Method for Evaluating the Ability of Exterior Vents to Resist the Entry of Embers and Direct Flame Impingement

    E2912-13 Standard Test Method for Fire Test of Non-Mechanical Fire Dampers Used in Vented Construction

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2014
       Standards: 191
       Pages: 1642

    - 2013
       Standards: 191
       Pages: 1630