ASTM Volume 04.05, June 2014

    Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry; Precast Concrete

    Table of Contents

    C4-04(2009) Standard Specification for Clay Drain Tile and Perforated Clay Drain Tile

    C12-13a Standard Practice for Installing Vitrified Clay Pipe Lines

    C14-14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe

    C14M-14 Standard Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)

    C32-13 Standard Specification for Sewer and Manhole Brick (Made From Clay or Shale)

    C34-13 Standard Specification for Structural Clay Load-Bearing Wall Tile

    C55-11 Standard Specification for Concrete Building Brick

    C56-13 Standard Specification for Structural Clay Nonloadbearing Tile

    C62-13a Standard Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)

    C67-13a Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile

    C73-10 Standard Specification for Calcium Silicate Brick (Sand-Lime Brick)

    C76-14 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C76M-14 Standard Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)

    C90-14 Standard Specification for Loadbearing Concrete Masonry Units

    C118-11 Standard Specification for Concrete Pipe for Irrigation or Drainage

    C118M-11 Standard Specification for Concrete Pipe for Irrigation or Drainage (Metric)

    C126-14 Standard Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units

    C129-11 Standard Specification for Nonloadbearing Concrete Masonry Units

    C139-11 Standard Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes

    C140/C140M-14 Standard Test Methods for Sampling and Testing Concrete Masonry Units and Related Units

    C144-11 Standard Specification for Aggregate for Masonry Mortar

    C159-06(2011) Standard Specification for Vitrified Clay Filter Blocks

    C212-14 Standard Specification for Structural Clay Facing Tile

    C216-14 Standard Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)

    C220-91(2009) Standard Specification for Flat Asbestos-Cement Sheets

    C221-98(2008) Standard Specification for Corrugated Asbestos-Cement Sheets

    C222-97(2008) Standard Specification for Asbestos-Cement Roofing Shingles

    C223-98(2008) Standard Specification for Asbestos-Cement Siding

    C270-12a Standard Specification for Mortar for Unit Masonry

    C279-13a Standard Specification for Chemical-Resistant Masonry Units

    C287-98(2012) Standard Specification for Chemical-Resistant Sulfur Mortar

    C296/C296M-00(2009)e1 Standard Specification for Asbestos-Cement Pressure Pipe

    C301-13 Standard Test Methods for Vitrified Clay Pipe

    C315-07(2011) Standard Specification for Clay Flue Liners and Chimney Pots

    C321-00(2012) Standard Test Method for Bond Strength of Chemical-Resistant Mortars

    C361-14a Standard Specification for Reinforced Concrete Low-Head Pressure Pipe

    C361M-14 Standard Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)

    C386-93(2012) Standard Practice for Use of Chemical-Resistant Sulfur Mortar

    C395-01(2012) Standard Specification for Chemical-Resistant Resin Mortars

    C397-00(2012) Standard Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C398-98(2012) Standard Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry

    C399-98(2012) Standard Practice for Use of Chemical-Resistant Resin Mortars

    C404-11 Standard Specification for Aggregates for Masonry Grout

    C410-13 Standard Specification for Industrial Floor Brick

    C412-11 Standard Specification for Concrete Drain Tile

    C412M-11 Standard Specification for Concrete Drain Tile (Metric)

    C414-03(2012) Standard Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars

    C425-04(2013) Standard Specification for Compression Joints for Vitrified Clay Pipe and Fittings

    C426-10 Standard Test Method for Linear Drying Shrinkage of Concrete Masonry Units

    C428/C428M-05(2011)e1 Standard Specification for Asbestos-Cement Nonpressure Sewer Pipe

    C443-12 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets

    C443M-11 Standard Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)

    C444-03(2009) Standard Specification for Perforated Concrete Pipe

    C444M-03(2009) Standard Specification for Perforated Concrete Pipe (Metric)

    C458/C458M-98(2011)e1 Standard Test Method for Organic Fiber Content of Asbestos-Cement Products

    C459/C459M-97(2011)e1 Standard Test Methods for Asbestos-Cement Flat Products

    C466-03(2012) Standard Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars

    C476-10 Standard Specification for Grout for Masonry

    C478-13 Standard Specification for Precast Reinforced Concrete Manhole Sections

    C478M-13 Standard Specification for Precast Reinforced Concrete Manhole Sections (Metric)

    C479-04(2013) Standard Specification for Vitrified Clay Liner Plates

    C497-13e1 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile

    C497M-13ae1 Standard Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)

    C500/C500M-07(2011)e1 Standard Test Methods for Asbestos-Cement Pipe

    C505-11 Standard Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints

    C505M-11 Standard Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)

    C506-14 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe

    C506M-14 Standard Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)

    C507-14 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe

    C507M-14 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)

    C508/C508M-00(2009)e1 Standard Specification for Asbestos-Cement Underdrain Pipe

    C530-13 Standard Specification for Structural Clay Nonloadbearing Screen Tile

    C541/C541M-98(2011)e1 Standard Specification for Linings for Asbestos-Cement Pipe

    C551/C551M-07(2011)e1 Standard Specification for Asbestos-Cement Fiberboard Insulating Panels

    C652-14 Standard Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)

    C654-11 Standard Specification for Porous Concrete Pipe

    C654M-11 Standard Specification for Porous Concrete Pipe (Metric)

    C655-14 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe

    C655M-14 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)

    C658-98(2012) Standard Specification for Chemical-Resistant Resin Grouts for Brick or Tile

    C659-90(2008) Standard Specification for Asbestos-Cement Organic-Foam Core Insulating Panels

    C663-98(2008) Standard Specification for Asbestos-Cement Storm Drain Pipe

    C668-98(2008) Standard Specification for Asbestos-Cement Transmission Pipe

    C700-13 Standard Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated

    C723-98(2012) Standard Practice for Chemical-Resistant Resin Grouts for Brick or Tile

    C725-90(2008) Standard Specification for Semidense Mineral Fiber Siding

    C744-11 Standard Specification for Prefaced Concrete and Calcium Silicate Masonry Units

    C746-90(2008) Standard Specification for Corrugated Asbestos-Cement Sheets for Bulkheading

    C780-14 Standard Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry

    C822-13 Standard Terminology Relating to Concrete Pipe and Related Products

    C825-06(2011) Standard Specification for Precast Concrete Barriers

    C828-11 Standard Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines

    C857-14 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures

    C858-10e1 Standard Specification for Underground Precast Concrete Utility Structures

    C875-98(2008) Standard Specification for Asbestos-Cement Conduit

    C877-08 Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections

    C877M-02(2009) Standard Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)

    C887-13 Standard Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar

    C890-13 Standard Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures

    C891-11 Standard Practice for Installation of Underground Precast Concrete Utility Structures

    C896-13 Standard Terminology Relating to Clay Products

    C901-10 Standard Specification for Prefabricated Masonry Panels

    C902-14 Standard Specification for Pedestrian and Light Traffic Paving Brick

    C904-01(2012) Standard Terminology Relating to Chemical-Resistant Nonmetallic Materials

    C905-01(2012) Standard Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

    C913-08 Standard Specification for Precast Concrete Water and Wastewater Structures

    C915-79(2010) Standard Specification for Precast Reinforced Concrete Crib Wall Members

    C923-08(2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals

    C923M-08b(2013) Standard Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)

    C935-13 Standard Specification for General Requirements for Prestressed Concrete Poles Statically Cast

    C936/C936M-13 Standard Specification for Solid Concrete Interlocking Paving Units

    C946-10 Standard Practice for Construction of Dry-Stacked, Surface-Bonded Walls

    C947-03(2009) Standard Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)

    C948-81(2009) Standard Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete

    C952-12 Standard Test Method for Bond Strength of Mortar to Masonry Units

    C966-98(2008) Standard Guide for Installing Asbestos-Cement Nonpressure Pipe

    C969-02(2009) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C969M-02(2009) Standard Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C980-13a Standard Specification for Industrial Chimney Lining Brick

    C985-13 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe

    C985M-13 Standard Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)

    C990-09(2014) Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants

    C990M-09(2014) Standard Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)

    C1006-07(2013) Standard Test Method for Splitting Tensile Strength of Masonry Units

    C1019-13 Standard Test Method for Sampling and Testing Grout

    C1037-08 Standard Practice for Inspection of Underground Precast Concrete Utility Structures

    C1072-13e1 Standard Test Methods for Measurement of Masonry Flexural Bond Strength

    C1080-98(2008) Standard Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers

    C1081-98(2008) Standard Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers

    C1082-98(2008) Standard Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill

    C1088-14 Standard Specification for Thin Veneer Brick Units Made From Clay or Shale

    C1089-13 Standard Specification for Spun Cast Prestressed Concrete Poles

    C1091-03a(2013) Standard Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines

    C1093-13ae1 Standard Practice for Accreditation of Testing Agencies for Masonry

    C1096/C1096M-07(2011)e1 Standard Test Method for Determination of Wood Fiber in Asbestos Cement

    C1103-03(2009) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines

    C1103M-03(2009) Standard Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)

    C1106-00(2012) Standard Test Methods for Chemical Resistance and Physical Properties of Carbon Brick

    C1119/C1119M-90(2009)e1 Standard Test Method for Vacuum Drainage of Asbestos-Cement Mixes

    C1120/C1120M-98(2011)e1 Standard Test Method for Wash Test of Asbestos

    C1121/C1121M-04(2009)e1 Standard Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos

    C1122/C1122M-90(2009)e1 Standard Test Method for Wet Volume of Asbestos

    C1123/C1123M-90(2009)e1 Standard Test Method for Compressibility and Recovery of Asbestos

    C1124/C1124M-90(2009)e1 Standard Test Method for Kerosene Retention of Asbestos

    C1125-89(2009) Standard Test Method for Penetration Index of Asbestos

    C1131-10e1 Standard Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems

    C1142-95(2013) Standard Specification for Extended Life Mortar for Unit Masonry

    C1148-92a(2008) Standard Test Method for Measuring the Drying Shrinkage of Masonry Mortar

    C1154-06(2011) Standard Terminology for Non-Asbestos Fiber-Reinforced Cement Products

    C1159-98(2012) Standard Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete

    C1160-97(2012) Standard Specification for Chemical-Resistant Carbon Brick

    C1162/C1162M-90(2009)e1 Standard Test Method for Loose Density of Asbestos

    C1167-11 Standard Specification for Clay Roof Tiles

    C1180-10 Standard Terminology of Mortar and Grout for Unit Masonry

    C1185-08(2012) Standard Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards

    C1186-08(2012) Standard Specification for Flat Fiber-Cement Sheets

    C1194-03(2011) Standard Test Method for Compressive Strength of Architectural Cast Stone

    C1195-03(2011) Standard Test Method for Absorption of Architectural Cast Stone

    C1196-09 Standard Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements

    C1197-09 Standard Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method

    C1208/C1208M-11 Standard Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels

    C1214-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method

    C1214M-13 Standard Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)

    C1225-08(2012) Standard Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates

    C1227-13 Standard Specification for Precast Concrete Septic Tanks

    C1228-96(2009) Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete

    C1229-94(2009) Standard Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)

    C1230-96(2009) Standard Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads

    C1232-12 Standard Terminology of Masonry

    C1244-11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1244M-11 Standard Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)

    C1261-13 Standard Specification for Firebox Brick for Residential Fireplaces

    C1262-10 Standard Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units

    C1272-14 Standard Specification for Heavy Vehicular Paving Brick

    C1283-11 Standard Practice for Installing Clay Flue Lining

    C1288-99(2010) Standard Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets

    C1298-95(2013) Standard Guide for Design and Construction of Brick Liners for Industrial Chimneys

    C1312-97(2012) Standard Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory

    C1314-12 Standard Test Method for Compressive Strength of Masonry Prisms

    C1319-11 Standard Specification for Concrete Grid Paving Units

    C1324-10 Standard Test Method for Examination and Analysis of Hardened Masonry Mortar

    C1325-08b Standard Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units

    C1357-09 Standard Test Methods for Evaluating Masonry Bond Strength

    C1364-10b Standard Specification for Architectural Cast Stone

    C1370-00(2012) Standard Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes

    C1372-11 Standard Specification for Dry-Cast Segmental Retaining Wall Units

    C1384-12a Standard Specification for Admixtures for Masonry Mortars

    C1400-11 Standard Guide for Reduction of Efflorescence Potential in New Masonry Walls

    C1403-13 Standard Test Method for Rate of Water Absorption of Masonry Mortars

    C1405-14 Standard Specification for Glazed Brick (Single Fired, Brick Units)

    C1417-14 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design

    C1417M-14 Standard Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)

    C1433-14 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1433M-14 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)

    C1447/C1447M-04(2010) Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe

    C1448/C1448M-05(2010) Standard Specification for Non-Asbestos Fiber-Cement Conduit

    C1449/C1449M-05a(2010) Standard Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe

    C1450/C1450M-04(2010) Standard Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe

    C1459-04(2009) Standard Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems

    C1478-08(2013) Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals

    C1478M-08a(2013) Standard Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)

    C1479-13 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations

    C1479M-13 Standard Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)

    C1491-13 Standard Specification for Concrete Roof Pavers

    C1492-03(2009) Standard Specification for Concrete Roof Tile

    C1504-14 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains

    C1504M-14 Standard Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)

    C1530/C1530M-04(2010)e1 Standard Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses

    C1531-09 Standard Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index

    C1532/C1532M-12 Standard Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction

    C1552-12 Standard Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing

    C1560-03(2009) Standard Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites

    C1568-08(2013) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)

    C1569-03(2009) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)

    C1570-03(2009) Standard Test Method for Wind Resistance of Concrete and Clay Roof Tiles(Air Permeability Method)

    C1577-14 Standard Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD

    C1586-05(2011) Standard Guide for Quality Assurance of Mortars

    C1587-09 Standard Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing

    C1601-14 Standard Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces

    C1613-10 Standard Specification for Precast Concrete Grease Interceptor Tanks

    C1618-13 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure

    C1618M-13 Standard Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)

    C1619-11 Standard Specification for Elastomeric Seals for Joining Concrete Structures

    C1623-11 Standard Specification for Manufactured Concrete Masonry Lintels

    C1628-11 Standard Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets

    C1634-11 Standard Specification for Concrete Facing Brick

    C1644-06(2011) Standard Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes

    C1645/C1645M-11 Standard Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units

    C1660-10 Standard Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry

    C1666/C1666M-08 Standard Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement

    C1670/C1670M-13a Standard Specification for Adhered Manufactured Stone Masonry Veneer (AMSMV) Units

    C1675-11 Standard Practice for Installation of Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers

    C1677-11a Standard Specification for Joints for Concrete Box, Using Rubber Gaskets

    C1686-09 Standard Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units

    C1691-11 Standard Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units

    C1692-11 Standard Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry

    C1693-11 Standard Specification for Autoclaved Aerated Concrete (AAC)

    C1694-09 Standard Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements

    C1704/C1704M-09a Standard Test Method for Sampling and Testing Structural Cementitious Panels

    C1705/C1705M-09 Standard Specification for Structural Cementitious Panels

    C1713-12 Standard Specification for Mortars for the Repair of Historic Masonry

    C1714/C1714M-13a Standard Specification for Preblended Dry Mortar Mix for Unit Masonry

    C1715-10 Standard Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems

    C1716/C1716M-12 Standard Specification for Compression Testing Machine Requirements for Concrete Masonry Units, Related Units, and Prisms

    C1717-12 Standard Test Methods for Conducting Strength Tests of Masonry Wall Panels

    C1719-11 Standard Test Method for Installed Precast Concrete Tanks and Accessories by the Negative Air Pressure (Vacuum) Test Prior to Backfill

    C1731-13 Standard Specification for Concrete Floor Tile

    C1745/C1745M-11 Standard Test Method for Measurement of Hydraulic Characteristics of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1746/C1746M-12 Standard Test Method for Measurement of Suspended Sediment Removal Efficiency of Hydrodynamic Stormwater Separators and Underground Settling Devices

    C1765-13 Standard Specification for Steel Fiber Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe

    C1780-13 Standard Practice for Installation Methods for Adhered Manufactured Stone Masonry Veneer

    C1781/C1781M-13 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems

    C1791-14 Standard Guide for Reduction of Efflorescence Potential in New Unit Pavement Systems

    D299/D299M-04(2009)e1 Standard Specification for Asbestos Yarns

    D315/D315M-95(2009)e1 Standard Specification for Woven Asbestos Tape

    D375/D375M-95(2009)e1 Standard Specification for Asbestos Roving

    D628/D628M-95(2009)e1 Standard Specification for Asbestos Tubular Sleeving

    D1061/D1061M-95(2009)e1 Standard Specification for Asbestos Lap

    D1118/D1118M-95(2009)e1 Standard Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles

    D1571/D1571M-95(2009)e1 Standard Specification for Woven Asbestos Cloth

    D1573/D1573M-95(2009)e1 Standard Test Method for Heat Aging of Asbestos Textiles

    D1918/D1918M-95(2009)e1 Standard Test Method for Asbestos Content of Asbestos Textiles

    D2100/D2100M-95(2009)e1 Standard Specification for Asbestos Textiles Used for Electrical Insulating Purposes

    D2589/D2589M-88(2011)e1 Standard Test Method for McNett Wet Classification of Dual Asbestos Fiber

    D2590/D2590M-98(2011)e1 Standard Test Method for Sampling Chrysotile Asbestos

    D2752/D2752M-88(2011)e1 Standard Test Methods for Air Permeability of Asbestos Fibers

    D2946-01(2010) Standard Terminology for Asbestos and Asbestos-Cement Products

    D2947/D2947M-88(2011)e1 Standard Test Method for Screen Analysis of Asbestos Fibers

    D2985/D2985M-92(2011)e1 Standard Test Method for Color of Asbestos

    D2987/D2987M-88(2011)e1 Standard Test Method for Moisture Content of Asbestos Fiber

    D3639/D3639M-92(2011)e1 Standard Test Method for Classification of Asbestos by Quebec Standard Test

    D3752-98(2011) Standard Test Method for Strength Imparted by Asbestos to a Cementitious Matrix

    D3880/D3880M-90(2009)e1 Standard Test Method for Asbestos Strength Units

    E514/E514M-14 Standard Test Method for Water Penetration and Leakage Through Masonry

    E518/E518M-10 Standard Test Methods for Flexural Bond Strength of Masonry

    E519/E519M-10 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2014
       Standards: 281
       Pages: 1534

    - 2013
       Standards: 279
       Pages: 1502