**Table of Contents**

D5/D5M-13 Standard Test Method for Penetration of Bituminous Materials

D8-13b Standard Terminology Relating to Materials for Roads and Pavements

D20-03(2009) Standard Test Method for Distillation of Road Tars

D70-09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

D75/D75M-13 Standard Practice for Sampling Aggregates

D98-05(2013) Standard Specification for Calcium Chloride

D113-07 Standard Test Method for Ductility of Bituminous Materials

D139-12 Standard Test Method for Float Test for Bituminous Materials

D140/D140M-09 Standard Practice for Sampling Bituminous Materials

D242/D242M-09 Standard Specification for Mineral Filler For Bituminous Paving Mixtures

D243-08 Standard Test Method for Residue of Specified Penetration

D244-09 Standard Test Methods and Practices for Emulsified Asphalts

D345-02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

D402-08 Standard Test Method for Distillation of Cutback Asphaltic (Bituminous) Products

D448-12 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

D490-92(2011) Standard Specification for Road Tar

D517-98(2008) Standard Specification for Asphalt Plank

D545-08 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

D546-10 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

D632-12 Standard Specification for Sodium Chloride

D633-11 Standard Volume Correction Table for Road Tar

D692/D692M-09 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

D946/D946M-09a Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction

D977-13e1 Standard Specification for Emulsified Asphalt

D979/D979M-12 Standard Practice for Sampling Bituminous Paving Mixtures

D994/D994M-11 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

D1073-11 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures

D1074-09 Standard Test Method for Compressive Strength of Bituminous Mixtures

D1075-11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

D1139/D1139M-09 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

D1195/D1195M-09 Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

D1196/D1196M-12 Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

D1369-84(2012) Standard Practice for Quantities of Materials for Bituminous Surface Treatments

D1461-11 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures

D1560-09a Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

D1561/D1561M-13 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor

D1665-98(2009) Standard Test Method for Engler Specific Viscosity of Tar Products

D1751-04(2013)e1 Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

D1752-04a(2013) Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

D1754/D1754M-09 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

D1856-09 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

D1985-13 Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)

D2027/D2027M-13 Standard Specification for Cutback Asphalt (Medium-Curing Type)

D2028/D2028M-10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)

D2041/D2041M-11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

D2042-09 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

D2170/D2170M-10 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

D2171/D2171M-10 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

D2172/D2172M-11 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

D2397/D2397M-13 Standard Specification for Cationic Emulsified Asphalt

D2399-12 Standard Practice for Selection of Cutback Asphalts

D2419-09 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

D2489/D2489M-08 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures

D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts

D2628-91(2011) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

D2726/D2726M-13 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

D2728-98(2009) Standard Practice for Paving Uses and Application Temperatures for Road Tars

D2835-89(2012) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

D2872-12e1 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

D2940/D2940M-09 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

D2950/D2950M-11 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

D2995-99(2009) Standard Practice for Estimating Application Rate of Bituminous Distributors

D3042-09 Standard Test Method for Insoluble Residue in Carbonate Aggregates

D3141/D3141M-09 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

D3143/D3143M-13 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

D3203/D3203M-11 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

D3279-12 Standard Test Method for

D3289-08 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)

D3319-11 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel

D3381/D3381M-13 Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

D3387-11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)

D3542-08(2013) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

D3549/D3549M-11 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

D3625/D3625M-12 Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

D3628-08 Standard Practice for Selection and Use of Emulsified Asphalts

D3633/D3633M-12 Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

D3665-12 Standard Practice for Random Sampling of Construction Materials

D3666-13 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

D3744/D3744M-11a Standard Test Method for Aggregate Durability Index

D3910-11 Standard Practices for Design, Testing, and Construction of Slurry Seal

D3963/D3963M-01(2007) Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

D4014-03(2012) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

D4070-08 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

D4071-84(2011) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

D4124-09 Standard Test Method for Separation of Asphalt into Four Fractions

D4125/D4125M-10 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method

D4215-07(2013) Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

D4280-12 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

D4311/D4311M-09 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

D4383-12 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

D4460-97(2009) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

D4469-11 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture

D4505-12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

D4552/D4552M-10 Standard Practice for Classifying Hot-Mix Recycling Agents

D4561-11 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

D4580/D4580M-12 Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

D4592-12 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

D4602-93(2008) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

D4694-09 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

D4695-03(2008) Standard Guide for General Pavement Deflection Measurements

D4748-10 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

D4788-03(2013) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

D4792/D4792M-13 Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

D4867/D4867M-09 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

D4887/D4887M-11 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials

D4956-13 Standard Specification for Retroreflective Sheeting for Traffic Control

D4957-08 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer

D5078/D5078M-11 Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

D5106-13 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

D5148-10 Standard Test Method for Centrifuge Kerosine Equivalent

D5167-13 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

D5249-10 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

D5329-09 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

D5340-12 Standard Test Method for Airport Pavement Condition Index Surveys

D5360-09 Standard Practice for Design and Construction of Bituminous Surface Treatments

D5361/D5361M-14 Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

D5404/D5404M-12 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

D5444-08 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

D5505-06 Standard Practice for Classifying Emulsified Recycling Agents

D5506-08 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials

D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

D5581-07a(2013) Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

D5624-13 Standard Practice for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

D5710/D5710M-13 Standard Specification for Trinidad Lake Modified Asphalt

D5801-12 Standard Test Method for Toughness and Tenacity of Bituminous Materials

D5821-13 Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

D5858-96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

D5893/D5893M-10 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

D5973-97(2012) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

D5977-03(2012) Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

D6084/D6084M-13 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

D6087-08 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

D6114/D6114M-09 Standard Specification for Asphalt-Rubber Binder

D6153-97(2007) Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

D6154-09 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

D6155-13 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

D6297-13 Standard Specification for Asphaltic Plug Joints for Bridges

D6307-10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method

D6372-05(2010) Standard Practice for Design, Testing, and Construction of Micro-Surfacing

D6373-13 Standard Specification for Performance Graded Asphalt Binder

D6390-11 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

D6433-11 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

D6521-13 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

D6607-00(2009) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

D6608-12 Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

D6626-09 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

D6627/D6627M-11 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

D6628-03(2010)e1 Standard Specification for Color of Pavement Marking Materials

D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

D6690-12 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

D6703-13 Standard Test Method for Automated Heithaus Titrimetry

D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

D6723-12 Standard Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)

D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

D6816-11 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

D6924-03(2012) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

D6925-09 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

D6926-10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

D6927-06 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

D6928-10 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D6929-10 Standard Practice for Freezing of Emulsified Asphalts

D6930-10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

D6931-12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

D6932/D6932M-08(2013) Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

D6933-13 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

D6934-08 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

D6935-11 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

D6936-09 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

D6937-08 Standard Test Method for Determining Density of Emulsified Asphalt

D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

D6995-05(2013) Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (G

D6997-12 Standard Test Method for Distillation of Emulsified Asphalt

D6998-11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

D6999-12 Standard Practice for Miscibility of Emulsified Asphalts

D7000-11 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

D7063/D7063M-11 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples

D7064/D7064M-08(2013) Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

D7113/D7113M-10 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

D7115-10 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared

D7173-11 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

D7174-05(2011) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

D7196-12 Standard Test Method for Raveling Test of Cold Mixed Emulsified Asphalt Samples

D7226-13 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

D7227/D7227M-11e1 Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus

D7228-06a(2011) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

D7229-08(2013)e1 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

D7313-13 Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test

D7370-09 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

D7402-09 Standard Practice for Identifying Cationic Emulsified Asphalts

D7403-09 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

D7404-07(2012) Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

D7495-12 Standard Specification for Minimum Requirements for Accreditation Bodies that Accredit Agencies Testing and Inspecting Road and Paving Materials

D7496-11 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

D7497-09 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

D7553-10 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

D7564/D7564M-09 Standard Practice for Construction of Asphalt-Rubber Cape Seal

D7585/D7585M-10 Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

D7643-10 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

D7741/D7741M-11e1 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer

D7870/D7870M-13 Standard Practice for Moisture Conditioning Compacted Asphalt Mixture Specimens by Using Hydrostatic Pore Pressure

D7906-14 Standard Practice for Recovery of Asphalt from Solution Using Toluene and the Rotary Evaporator

E274/E274M-11 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

E303-93(2013) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

E445/E445M-88(2013) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

E501-08 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

E524-08 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

E556/E556M-11 Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

E660-90(2011) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

E670-09 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter

E867-06(2012) Standard Terminology Relating to Vehicle-Pavement Systems

E950/E950M-09 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

E1166-00(2009) Standard Guide for Network Level Pavement Management

E1170-97(2012) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

E1215-93(2012) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

E1274-03(2012) Standard Test Method for Measuring Pavement Roughness Using a Profilograph

E1318-09 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods

E1337-90(2012) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

E1364-95(2012) Standard Test Method for Measuring Road Roughness by Static Level Method

E1448/E1448M-09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

E1489-08(2013) Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

E1551-08 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment

E1656/E1656M-11 Standard Guide for Classification of Automated Pavement Condition Survey Equipment

E1703/E1703M-10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

E1777-09 Standard Guide for Prioritization of Data Needs for Pavement Management

E1778-98a(2008) Standard Terminology Relating to Pavement Distress

E1844-08 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire

E1845-09 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

E1859/E1859M-11e1 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

E1889-97(2009) Standard Guide for Pavement Management Implementation

E1890-11 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

E1911-09ae1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

E1926-08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

E1927-98(2012) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

E1960-07(2011) Standard Practice for Calculating International Friction Index of a Pavement Surface

E2034-99(2012) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

E2100-04(2010) Standard Practice for Calculating the International Runway Friction Index

E2133-03(2013) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

E2157-09 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

E2213-03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

E2259-03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data

E2300-09 Standard Specification for Highway Traffic Monitoring Devices

E2340/E2340M-11e1 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

E2341/E2341M-05(2009) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

E2415-05(2012) Standard Practice for Installing Piezoelectric Highway Traffic Sensors

E2467-05(2012) Standard Practice for Developing Axle Count Adjustment Factors

E2468-05(2012) Standard Practice for Metadata to Support Archived Data Management Systems

E2532-09 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

E2560-13 Standard Specification for Data Format for Pavement Profile

E2561-07a(2012) Standard Practice for the Installation of Inductive Loop Detectors

E2583-07(2011) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

E2665-08 Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

E2666-09 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

E2667-09 Standard Practice for Acquiring Intersection Turning Movement Traffic Data

E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data

E2793-10e1 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

E2835-11 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device

E2840-11 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

E2883-13 Standard Guide for Standard Guide for the Evaluation, and Calibration, Continuous Friction Measurement Equipment (CFME)

E2955-13 Standard Practice for Simulating Profilograph Response to Longitudinal Profiles of Traveled Surfaces