ASTM Volume 08.01, June 2013

    Plastics (I): D256-D3159

    Table of Contents

    C1147-01(2012) Standard Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics

    D256-10 Standard Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics

    D494-11 Standard Test Method for Acetone Extraction of Phenolic Molded or Laminated Products

    D542-00(2006) Standard Test Method for Index of Refraction of Transparent Organic Plastics

    D543-06 Standard Practices for Evaluating the Resistance of Plastics to Chemical Reagents

    D570-98(2010)e1 Standard Test Method for Water Absorption of Plastics

    D618-08 Standard Practice for Conditioning Plastics for Testing

    D635-10 Standard Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position

    D638-10 Standard Test Method for Tensile Properties of Plastics

    D648-07 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position

    D695-10 Standard Test Method for Compressive Properties of Rigid Plastics

    D696-08e1 Standard Test Method for Coefficient of Linear Thermal Expansion of Plastics Between −30°C and 30°C with a Vitreous Silica Dilatometer

    D704-99(2012) Standard Specification for Melamine-Formaldehyde Molding Compounds

    D705-99(2012) Standard Specification for Urea-Formaldehyde Molding Compounds

    D706-09 Standard Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds

    D707-09 Standard Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds

    D731-10 Standard Test Method for Molding Index of Thermosetting Molding Powder

    D732-10 Standard Test Method for Shear Strength of Plastics by Punch Tool

    D746-07 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact

    D747-10 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

    D785-08 Standard Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials

    D787-12 Standard Specification for Ethyl Cellulose Molding and Extrusion Compounds

    D788-12 Standard Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds

    D789-07e1 Standard Test Methods for Determination of Solution Viscosities of Polyamide (PA)

    D790-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials

    D792-08 Standard Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement

    D882-12 Standard Test Method for Tensile Properties of Thin Plastic Sheeting

    D883-12 Standard Terminology Relating to Plastics

    D952-10 Standard Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials

    D953-10 Standard Test Method for Bearing Strength of Plastics

    D955-08 Standard Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics

    D957-12 Standard Practice for Determining Surface Temperature of Molds for Plastics

    D1003-11e1 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics

    D1004-13 Standard Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting

    D1042-12 Standard Test Method for Linear Dimensional Changes of Plastics Caused by Exposure to Heat and Moisture

    D1043-10 Standard Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test

    D1044-08e1 Standard Test Method for Resistance of Transparent Plastics to Surface Abrasion

    D1045-08 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics

    D1055-09 Standard Specifications for Flexible Cellular Materials-Latex Foam

    D1056-07 Standard Specification for Flexible Cellular Materials—Sponge or Expanded Rubber

    D1201-99(2012) Standard Specification for Thermosetting Polyester Molding Compounds

    D1203-10 Standard Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods

    D1204-08 Standard Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature

    D1238-10 Standard Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer

    D1239-07 Standard Test Method for Resistance of Plastic Films to Extraction by Chemicals

    D1243-95(2008) Standard Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers

    D1248-12 Standard Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable

    D1430-11 Standard Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics

    D1435-05 Standard Practice for Outdoor Weathering of Plastics

    D1499-05 Standard Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics

    D1505-10 Standard Test Method for Density of Plastics by the Density-Gradient Technique

    D1525-09 Standard Test Method for Vicat Softening Temperature of Plastics

    D1562-09 Standard Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds

    D1593-09 Standard Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting

    D1600-13 Standard Terminology for Abbreviated Terms Relating to Plastics

    D1601-12 Standard Test Method for Dilute Solution Viscosity of Ethylene Polymers

    D1603-12 Standard Test Method for Carbon Black Content in Olefin Plastics

    D1621-10 Standard Test Method for Compressive Properties Of Rigid Cellular Plastics

    D1622-08 Standard Test Method for Apparent Density of Rigid Cellular Plastics

    D1623-09 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics

    D1636-99(2012) Standard Specification for Allyl Molding Compounds

    D1667-05(2011) Standard Specification for Flexible Cellular Materials - Poly (Vinyl Chloride) Foam (Closed-Cell)

    D1693-13 Standard Test Method for Environmental Stress-Cracking of Ethylene Plastics

    D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens

    D1709-09 Standard Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method

    D1710-08 Standard Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes

    D1712-09 Standard Practice for Resistance of Plastics to Sulfide Staining

    D1746-09 Standard Test Method for Transparency of Plastic Sheeting

    D1755-09 Standard Specification for Poly(Vinyl Chloride) Resins

    D1763-00(2005) Standard Specification for Epoxy Resins

    D1784-11 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D1786-10 Standard Specification for Toluene Diisocyanate

    D1790-08 Standard Test Method for Brittleness Temperature of Plastic Sheeting by Impact

    D1822-06 Standard Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials

    D1823-95(2009) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer

    D1824-95(2010) Standard Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates

    D1894-11e1 Standard Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting

    D1895-96(2010)e1 Standard Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials

    D1896/D1896M-10 Standard Practice for Transfer Molding Test Specimens of Thermosetting Compounds

    D1921-12 Standard Test Methods for Particle Size (Sieve Analysis) of Plastic Materials

    D1922-09 Standard Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method

    D1929-12 Standard Test Method for Determining Ignition Temperature of Plastics

    D1938-08 Standard Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method

    D1972-97(2005) Standard Practice for Generic Marking of Plastic Products

    D1998-06 Standard Specification for Polyethylene Upright Storage Tanks

    D2103-10 Standard Specification for Polyethylene Film and Sheeting

    D2115-10 Standard Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions

    D2116-07(2012) Standard Specification for FEP-Fluorocarbon Molding and Extrusion Materials

    D2124-99(2011) Standard Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique

    D2126-09 Standard Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging

    D2222-09 Standard Test Method for Methanol Extract of Vinyl Chloride Resins

    D2238-92(2012)e1 Standard Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm−1

    D2287-12 Standard Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds

    D2291-09 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites

    D2343-09 Standard Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics

    D2383-09 Standard Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions

    D2396-94(2012) Standard Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer

    D2457-13 Standard Test Method for Specular Gloss of Plastic Films and Solid Plastics

    D2463-10b Standard Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers

    D2538-02(2010) Standard Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer

    D2561-12 Standard Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers

    D2562-94(2008) Standard Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics

    D2563-08 Standard Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts

    D2565-99(2008) Standard Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications

    D2578-09 Standard Test Method for Wetting Tension of Polyethylene and Polypropylene Films

    D2581-09 Standard Specification for Polybutylene (PB) Plastics Molding and Extrusion Materials

    D2582-09 Standard Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting

    D2583-13 Standard Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor

    D2584-11 Standard Test Method for Ignition Loss of Cured Reinforced Resins

    D2647-10 Standard Specification for Crosslinkable Ethylene Plastics

    D2659-11 Standard Test Method for Column Crush Properties of Blown Thermoplastic Containers

    D2673-09 Standard Specification for Oriented Polypropylene Film

    D2684-10 Standard Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products

    D2732-08 Standard Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting

    D2734-09 Standard Test Methods for Void Content of Reinforced Plastics

    D2765-11 Standard Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics

    D2838-09 Standard Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting

    D2839-10 Standard Practice for Use of a Melt Index Strand for Determining Density of Polyethylene

    D2842-12 Standard Test Method for Water Absorption of Rigid Cellular Plastics

    D2843-10 Standard Test Method for Density of Smoke from the Burning or Decomposition of Plastics

    D2857-95(2007) Standard Practice for Dilute Solution Viscosity of Polymers

    D2863-12e1 Standard Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)

    D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles

    D2923-08 Standard Test Method for Rigidity of Polyolefin Film and Sheeting

    D2990-09 Standard Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics

    D3012-13 Standard Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven

    D3013-99(2012) Standard Specification for Epoxy Molding Compounds

    D3014-11 Standard Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position

    D3016-97(2010) Standard Practice for Use of Liquid Exclusion Chromatography Terms and Relationships

    D3030-11 Standard Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins

    D3045-92(2010) Standard Practice for Heat Aging of Plastics Without Load

    D3123-09 Standard Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds

    D3124-98(2011) Standard Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry

    D3159-10 Standard Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2013
       Standards: 133
       Pages: 938

    - 2012
       Standards: 133
       Pages: 932