ASTM Volume 06.02, February 2013
Paint -- Products and Applications; Protective Coatings; Pipeline Coatings
Return to Previous Page

Table of Contents

C267-01(2012) Standard Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
C307-03(2012) Standard Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
C308-00(2012)e1 Standard Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
C413-01(2012) Standard Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C531-00(2012) Standard Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C579-01(2012) Standard Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C580-02(2012) Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
C722-04(2012) Standard Specification for Chemical-Resistant Monolithic Floor Surfacings
C868-02(2012) Standard Test Method for Chemical Resistance of Protective Linings
C1486-00(2012) Standard Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
D333-01(2007) Standard Guide for Clear and Pigmented Lacquers
D358-98(2012)e1 Standard Specification for Wood to Be Used as Panels in Weathering Tests of Coatings
D365-01(2011) Standard Guide for Soluble Nitrocellulose Base Solutions
D711-10 Standard Test Method for No-Pick-Up Time of Traffic Paint
D713-90(2010) Standard Practice for Conducting Road Service Tests on Fluid Traffic Marking Materials
D868-10 Standard Practice for Determination of Degree of Bleeding of Traffic Paint
D913-10 Standard Practice for Evaluating Degree of Traffic Paint Line Wear
D1155-10 Standard Test Method for Roundness of Glass Spheres
D1214-10 Standard Test Method for Sieve Analysis of Glass Spheres
D1308-02(2007) Standard Test Method for Effect of Household Chemicals on Clear and Pigmented Organic Finishes
D1309-93(2010) Standard Test Method for Settling Properties of Traffic Paints During Storage
D1316-06(2011) Standard Test Method for Fineness of Grind of Printing Inks By the NPIRI Grindometer
D1734-93(2007) Standard Practice for Making Cementitious Panels for Testing Coatings
D1849-95(2008) Standard Test Method for Package Stability of Paint
D2064-91(2012) Standard Test Method for Print Resistance of Architectural Paints
D2065-03(2011) : Standard Test Method for Determination of Edge Performance of Composite Wood Products Under Surfactant Accelerated Moisture Stress
D2066-07(2012) Standard Test Methods for Relative Tinting Strength of Paste-Type Printing Ink Dispersions
D2067-97(2008)e1 Standard Test Method for Coarse Particles in Printing Ink Dispersions
D2091-96(2011) Standard Test Method for Print Resistance of Lacquers
D2199-03(2007) Standard Test Method for Measurement of Plasticizer Migration From Vinyl Fabrics to Lacquers
D2200-08 Standard Practice for Use of Pictorial Surface Preparation Standards and Guides for Painting Steel Surfaces
D2205-85(2010) Standard Guide for Selection of Tests for Traffic Paints
D2243-95(2008) Standard Test Method for Freeze-Thaw Resistance of Water-Borne Coatings
D2338-02(2007) Standard Test Method for Determining Particle Size of Multicolor Lacquers
D2486-06(2012)e1 Standard Test Methods for Scrub Resistance of Wall Paints
D2743-68(2010) Standard Practices for Uniformity of Traffic Paint Vehicle Solids by Spectroscopy and Gas Chromatography
D2792-69(2010) Standard Test Method for Solvent and Fuel Resistance of Traffic Paint
D2793-99(2011) Standard Test Method for Block Resistance of Organic Coatings on Wood Panel Substrates
D2921-98(2011) Standard Test Method for Qualitative Tests for the Presence of Water Repellents and Preservatives in Wood Products
D2967-07 Standard Test Method for Corner Coverage of Powder Coatings
D3002-07 Standard Guide for Evaluation of Coatings Applied to Plastics
D3003-01(2012) Standard Test Method for Pressure Mottling and Blocking Resistance of Organic Coatings on Metal Substrates
D3023-98(2011) Standard Practice for Determination of Resistance of Factory-Applied Coatings on Wood Products to Stains and Reagents
D3170-12 Standard Test Method for Chipping Resistance of Coatings
D3258-04(2010)e1 Standard Test Method for Porosity of White or Near White Paint Films by Staining
D3260-01(2011) Standard Test Method for Acid and Mortar Resistance of Factory-Applied Clear Coatings on Extruded Aluminum Products
D3276-07 Standard Guide for Painting Inspectors (Metal Substrates)
D3322-82(2011) Standard Practice for Testing Primers and Primer Surfacers Over Preformed Metal
D3424-11 Standard Practice for Evaluating the Relative Lightfastness and Weatherability of Printed Matter
D3450-00(2010)e1 Standard Test Method for Washability Properties of Interior Architectural Coatings
D3451-06(2012) Standard Guide for Testing Coating Powders and Powder Coatings
D3623-78a(2012) Standard Test Method for Testing Antifouling Panels in Shallow Submergence
D3730-10 Standard Guide for Testing High-Performance Interior Architectural Wall Coatings
D3732-82(2011) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
D3843-00(2008) Standard Practice for Quality Assurance for Protective Coatings Applied to Nuclear Facilities
D3911-08 Standard Test Method for Evaluating Coatings Used in Light-Water Nuclear Power Plants at Simulated Design Basis Accident (DBA) Conditions
D3912-10 Standard Test Method for Chemical Resistance of Coatings and Linings for Use in Nuclear Power Plants
D3928-00a(2010) Standard Test Method for Evaluation of Gloss or Sheen Uniformity
D4040-10 Standard Test Method for Rheological Properties of Paste Printing and Vehicles by the Falling-Rod Viscometer
D4062-11 Standard Test Method for Leveling of Paints by Draw-Down Method
D4082-10 Standard Test Method for Effects of Gamma Radiation on Coatings for Use in Nuclear Power Plants
D4145-10 Standard Test Method for Coating Flexibility of Prepainted Sheet
D4146-10 Standard Test Method for Formability of Zinc-Rich Primer/Chromate Complex Coatings on Steel
D4147-99(2007)e1 Standard Practice for Applying Coil Coatings Using The Wire-Wound Drawdown Bar
D4213-08(2012) Standard Test Method for Scrub Resistance of Paints by Abrasion Weight Loss
D4217-07 Standard Test Method for Gel Time of Thermosetting Coating Powder
D4227-05(2012) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Concrete Surfaces
D4228-05(2012) Standard Practice for Qualification of Coating Applicators for Application of Coatings to Steel Surfaces
D4236-94(2011) Standard Practice for Labeling Art Materials for Chronic Health Hazards
D4242-07 Standard Test Method for Inclined Plate Flow for Thermosetting Coating Powders
D4258-05(2012) Standard Practice for Surface Cleaning Concrete for Coating
D4259-88(2012) Standard Practice for Abrading Concrete
D4260-05(2012) Standard Practice for Liquid and Gelled Acid Etching of Concrete
D4261-05(2012) Standard Practice for Surface Cleaning Concrete Masonry Units for Coating
D4262-05(2012) Standard Test Method for pH of Chemically Cleaned or Etched Concrete Surfaces
D4263-83(2012) Standard Test Method for Indicating Moisture in Concrete by the Plastic Sheet Method
D4285-83(2012) Standard Test Method for Indicating Oil or Water in Compressed Air
D4286-08 Standard Practice for Determining Coating Contractor Qualifications for Nuclear Powered Electric Generation Facilities
D4302-05(2010) Standard Specification for Artists' Oil, Resin-Oil, and Alkyd Paints
D4303-10 Standard Test Methods for Lightfastness of Colorants Used in Artists' Materials
D4361-10 Standard Test Method for Apparent Tack of Printing Inks and Vehicles by a Three-Roller Tackmeter
D4400-99(2012)e1 Standard Test Method for Sag Resistance of Paints Using a Multinotch Applicator
D4417-11 Standard Test Methods for Field Measurement of Surface Profile of Blast Cleaned Steel
D4446-08(2012) Standard Test Method for Anti-Swelling Effectiveness of Water-Repellent Formulations and Differential Swelling of Untreated Wood When Exposed to Liquid Water Environments
D4537-12 Standard Guide for Establishing Procedures to Qualify and Certify Personnel Performing Coating and Lining Work Inspection in Nuclear Facilities
D4538-05e1 Standard Terminology Relating to Protective Coating and Lining Work for Power Generation Facilities
D4541-09e1 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
D4618-92(2010)e1 Standard Specification for Design and Fabrication of Flue Gas Desulfurization System Components for Protective Lining Application
D4619-12 Standard Practice for Inspection of Linings in Operating Flue Gas Desulfurization Systems
D4707-09 Standard Test Method for Measuring Paint Spatter Resistance During Roller Application
D4712-87a(2005) Standard Guide for Testing Industrial Water-Reducible Coatings
D4713-12 Standard Test Methods for Nonvolatile Content of Heatset and Liquid Printing Ink Systems
D4752-10 Standard Practice for Measuring MEK Resistance of Ethyl Silicate (Inorganic) Zinc-Rich Primers by Solvent Rub
D4787-08 Standard Practice for Continuity Verification of Liquid or Sheet Linings Applied to Concrete Substrates
D4796-10 Standard Test Method for Bond Strength of Thermoplastic Traffic Marking Materials
D4797-12a Standard Test Methods for Gravimetric Analysis of White and Yellow Thermoplastic Traffic Marking
D4828-94(2012)e1 Standard Test Methods for Practical Washability of Organic Coatings
D4838-88(2010) Standard Test Method for Determining the Relative Tinting Strength of Chromatic Paints
D4938-89(2007) Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
D4939-89(2007) Standard Test Method for Subjecting Marine Antifouling Coating to Biofouling and Fluid Shear Forces in Natural Seawater
D4940-10 Standard Test Method for Conductimetric Analysis of Water Soluble Ionic Contamination of Blasting Abrasives
D4941-06(2010) Standard Practice for Preparing Drawdowns of Artists' Paste Paints
D4942-11 Standard Test Methods for Water Pickup of Lithographic Printing Inks and Vehicles in a Laboratory Mixer
D4946-89(2012) Standard Test Method for Blocking Resistance of Architectural Paints
D4958-10 Standard Test Method for Comparison of the Brush Drag of Latex Paints
D4960-08 Standard Test Method for Evaluation of Color for Thermoplastic Traffic Marking Materials
D5007-99(2008) Standard Test Method for Wet-to-Dry Hiding Change
D5009-02(2011) Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions
D5010-08ae1 Standard Guide for Testing Printing Inks and Related Materials
D5043-04(2009) Standard Practice for Field Identification of Coatings
D5063-90(2012) Standard Guide for Use of Certification of Coating Conformance Form
D5064-07(2012) Standard Practice for Conducting a Patch Test to Assess Coating Compatibility
D5065-07 Standard Guide for Assessing the Condition of Aged Coatings on Steel Surfaces
D5066-91(2011) Standard Test Method for Determination of the Transfer Efficiency Under Production Conditions for Spray Application of Automotive Paints-Weight Basis
D5067-05(2010) Standard Specification for Artists' Watercolor Paints
D5068-04(2009) Standard Practice for Preparation of Paint Brushes for Evaluation
D5069-07 Standard Practice for Preparation of Paint-Roller Covers for Evaluation of Architectural Coatings
D5095-91(2007) Standard Test Method for Determination of the Nonvolatile Content in Silanes, Siloxanes and Silane-Siloxane Blends Used in Masonry Water Repellent Treatments
D5098-05a(2010) Standard Specification for Artists' Acrylic Dispersion Paints
D5107-03(2007) Standard Practice for Preparatory Surface Cleaning of Architectural Sandstone
D5108-90(2007) Standard Test Method for Organotin Release Rates of Antifouling Coating Systems in Sea Water
D5139-12 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
D5144-08e1 Standard Guide for Use of Protective Coating Standards in Nuclear Power Plants
D5146-10 Standard Guide to Testing Solvent-Borne Architectural Coatings
D5150-92(2009) Standard Test Method for Hiding Power of Architectural Paints Applied by Roller
D5161-04a Standard Guide for Specifying Inspection Requirements for Coating and Lining Work (Metal Substrates)
D5162-08 Standard Practice for Discontinuity (Holiday) Testing of Nonconductive Protective Coating on Metallic Substrates
D5163-08 Standard Guide for Establishing a Program for Condition Assessment of Coating Service Level I Coating Systems in Nuclear Power Plants
D5181-09 Standard Test Method for Abrasion Resistance of Printed Matter by the GA-CAT Comprehensive Abrasion Tester
D5286-01(2011) Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints
D5301-92(2012) Standard Practice for Physical Characterization of Paint Brushes
D5324-10 Standard Guide for Testing Water-Borne Architectural Coatings
D5326-94a(2009) Standard Test Method for Color Development in Tinted Latex Paints
D5327-97(2007) Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions
D5367-08 Standard Practice for Evaluating Coatings Applied Over Surfaces Treated With Inhibitors Used to Prevent Flash Rusting of Steel When Water or Water/Abrasive Blasted
D5382-02(2007) Standard Guide to Evaluation of Optical Properties of Powder Coatings
D5383-02(2010) Standard Practice for Visual Determination of the Lightfastness of Art Materials by Art Technologists
D5398-97(2010) Standard Practice for Visual Evaluation of the Lightfastness of Art Materials by the User
D5401-03(2009) Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
D5402-06(2011) Standard Practice for Assessing the Solvent Resistance of Organic Coatings Using Solvent Rubs
D5403-93(2007) Standard Test Methods for Volatile Content of Radiation Curable Materials
D5479-94(2007) Standard Practice for Testing Biofouling Resistance of Marine Coatings Partially Immersed
D5498-12 Standard Guide for Developing a Training Program for Personnel Performing Coating and Lining Work Inspection for Nuclear Facilities
D5499-94(2007) Standard Test Methods for Heat Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D5517-07 Standard Test Method for Determining Extractability of Metals from Art Materials
D5618-94(2011) Standard Test Method for Measurement of Barnacle Adhesion Strength in Shear
D5702-07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
D5703-95(2007) Standard Practice for Preparatory Surface Cleaning for Clay Brick Masonry
D5723-95(2010) Standard Practice for Determination of Chromium Treatment Weight on Metal Substrates by X-Ray Fluorescence
D5724-06(2010) Standard Specification for Gouache Paints
D5795-95(2008) Standard Test Method for Determination of Liquid Water Absorption of Coated Hardboard and Other Composite Wood Products Via “Cobb Ring” Apparatus
D5796-10 Standard Test Method for Measurement of Dry Film Thickness of Thin Film Coil-Coated Systems by Destructive Means Using a Boring Device
D5860-95(2007) Standard Test Method for Evaluation of the Effect of Water Repellent Treatments on Freeze-Thaw Resistance of Hydraulic Cement Mortar Specimens
D5861-07 Standard Guide for Significance of Particle Size Measurements of Coating Powders
D5909-96a(2011) Standard Test Method for Drying Time of Oxidative-Drying Printing Inks by Squalene Resistance
D5913-96(2009)e1 Standard Test Method for Evaluation of Cleanability of Paint Brushes
D5959-12 Standard Test Method for Bulk Density of Level Paintbrush Filaments
D5965-02(2007) Standard Test Methods for Specific Gravity of Coating Powders
D6073-08a Standard Test Method for Relative Setting of Heatset Printing Inks
D6137-97(2012) Standard Test Method for Sulfuric Acid Resistance of Polymer Linings for Flue Gas Desulfurization Systems
D6189-97(2008) Standard Practice for Evaluating the Efficiency of Chemical Removers for Organic Coatings
D6206-09 Standard Practice for Sampling of Coating Films
D6237-09 Standard Guide for Painting Inspectors (Concrete and Masonry Substrates)
D6279-03(2007) Standard Test Method for Rub Abrasion Mar Resistance of High Gloss Coatings
D6337-98(2007) Standard Practice for Physical Characterization of Woven Paint Applicator Fabrics
D6386-10 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Painting
D6419-00(2009) Standard Test Method for Volatile Content of Sheet-Fed and Coldset Web Offset Printing Inks
D6441-05(2010) Standard Test Methods for Measuring the Hiding Power of Powder Coatings
D6442-06(2012) Standard Test Method for Determination of Copper Release Rate From Antifouling Coatings in Substitute Ocean Water
D6486-01(2011) Standard Practice for Short Term Vehicle Service Exposure of Automotive Coatings
D6487-10 Standard Practice for Preparing Prints of Paste Printing Inks Using a Hand Operated Laboratory Flat-Bed Press
D6488-08 Standard Terminology Relating to Print Problems
D6489-99(2012) Standard Test Method for Determining the Water Absorption of Hardened Concrete Treated With a Water Repellent Coating
D6490-99(2006) Standard Test Method for Water Vapor Transmission of NonFilm Forming Treatments Used on Cementitious Panels
D6491-09 Standard Practice for Evaluation of Aging Resistance of Prestressed Prepainted Metal In a Dry Heat Test
D6492-99(2011) Standard Practice for Detection of Hexavalent Chromium On Zinc and Zinc/Aluminum Alloy Coated Steel
D6531-00(2010) Standard Test Method for Relative Tinting Strength of Aqueous Ink Systems by Instrumental Measurement
D6532-00(2006) Standard Test Method for Evaluation of the Effect of Clear Water Repellent Treatments on Water Absorption of Hydraulic Cement Mortar Specimens
D6577-06(2011)e1 Standard Guide for Testing Industrial Protective Coatings
D6578-08 Standard Practice for Determination of Graffiti Resistance
D6583-04(2010) Standard Test Method for Porosity of Paint Film by Mineral Oil Absorption
D6665-09 Standard Practice for Evaluation of Aging Resistance of Pre-stressed Prepainted Metal in a Boiling Water Test
D6677-07(2012) Standard Test Method for Evaluating Adhesion by Knife
D6686-01(2008)e2 Standard Test Method for Evaluation of Tannin Stain Resistance of Coatings
D6688-11 Standard Practice for Relative Resistance of Printed Matter to Liquid Chemicals by a Sandwich Technique
D6736-08 Standard Test Method for Burnish Resistance of Latex Paints
D6737-12 Standard Test Method for Bulk Density of Tapered Paintbrush Filaments
D6763-08 Standard Guide for Testing Exterior Wood Stains and Clear Water Repellents
D6801-07 Standard Test Method for Measuring Maximum Spontaneous Heating Temperature of Art and Other Materials
D6846-02(2012) Standard Practice for Preparing Prints of Paste Printing Inks with a Printing Gage
D6900-10 Standard Test Method for Wet Adhesion of Latex Paints to a Gloss Alkyd Enamel Substrate
D6901-06 Standard Specification for Artists' Colored Pencils
D6903-07 Standard Test Method for Determination of Organic Biocide Release Rate From Antifouling Coatings in Substitute Ocean Water
D6904-03(2007) Standard Practice for Resistance to Wind-Driven Rain for Exterior Coatings Applied on Masonry
D6906-11a Standard Test Method for Determination of Titanium Treatment Weight on Metal Substrates by Wavelength Dispersive X-Ray Fluorescence
D6943-10 Standard Practice for Immersion Testing of Industrial Protective Coatings
D6944-09 Standard Practice for Resistance of Cured Coatings to Thermal Cycling
D6957-12 Standard Practice for Measuring Curl in Paint Brush Filling Material
D6990-05(2011) Standard Practice for Evaluating Biofouling Resistance and Physical Performance of Marine Coating Systems
D7054-04(2009) Standard Specification for Cautionary Labeling of Extension Poles For Use With Paint Applicators Distributed In North America
D7055-09 Standard Practice for Preparation (by Abrasive Blast Cleaning) of Hot-Rolled Carbon Steel Panels for Testing of Coatings
D7072-04(2009) Standard Practice for Evaluating Accelerated Efflorescence of Latex Coatings
D7073-05(2012) Standard Guide for Application and Evaluation of Brush and Roller Applied Paint Films
D7088-08 Standard Practice for Resistance to Hydrostatic Pressure for Coatings Used in Below Grade Applications Applied to Masonry
D7089-06 Standard Practice for Determination of the Effectiveness of Anti-Graffiti Coating for Use on Concrete, Masonry and Natural Stone Surfaces by Pressure Washing
D7108-05 Standard Guide for Establishing Qualifications for a Nuclear Coatings Specialist
D7127-05 Standard Test Method for Measurement of Surface Roughness of Abrasive Blast Cleaned Metal Surfaces Using a Portable Stylus Instrument
D7163-11 Standard Test Method for Specular Gloss of Printed Matter
D7167-05 Standard Guide for Establishing Procedures to Monitor the Performance of Safety-Related Coating Service Level III Lining Systems in an Operating Nuclear Power Plant
D7188-05(2010) Standard Terminology for Printing Inks, Materials, and Processes
D7189-12 Standard Test Method for Relative Mileage of News Ink on Newsprint
D7190-10(2011) Standard Practice to Evaluate Leaching of Water-Soluble Materials from Latex Paint Films
D7230-06 Standard Guide for Evaluating Polymeric Lining Systems for Water Immersion in Coating Service Level III Safety-Related Applications on Metal Substrates
D7233-08(2012) Standard Test Method for Testing Fracture of Level Paintbrush Filaments
D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
D7244-06a(2011) Standard Test Method for Relative Cure of Energy-Cured Inks and Coatings
D7270-07 Standard Guide for Environmental and Performance Verification of Factory-Applied Liquid Coatings
D7305-08a Standard Test Method for Reflection Density of Printed Matter
D7306-07 Standard Practice for Testing Low Temperature Film-Formation of Latex Paints by Visual Observation
D7307-06(2011) Standard Practice for Sampling of Thermoplastic Traffic Marking Materials
D7308-07(2012) Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
D7354-11 Standard Guide for Artists’ Paint Waste Disposal in Private, Non-Commercial Settings
D7355-10 Standard Guide for Artists' Paint Waste Disposal in Smaller Commercial or Educational Settings
D7376-10a Standard Practice for Outdoor Evaluation of Wet Stack Storage Conditions on Coil-Coated Metals
D7377-09 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints using a Water Faucet
D7378-10 Standard Practice for Measurement of Thickness of Applied Coating Powders to Predict Cured Thickness
D7393-07(2012) Standard Practice for Indicating Oil in Abrasives
D7396-08 Standard Guide for Preparation of New, Continuous Zinc-Coated (Galvanized) Steel Surfaces for Painting
D7488-11 Standard Test Method for Open Time of Latex Paints
D7489-09 Standard Practice for Evaluating Touch-Up Properties of Architectural Coatings under Various Environmental Conditions
D7491-08 Standard Guide for Management of Non-Conforming Coatings in Coating Service Level I Areas of Nuclear Power Plants
D7514-09 Standard Test Method for Evaluating Ink Stainblocking of Architectural Paint Systems by Visual Assessment
D7538-09 Standard Practice for Evaluating the Water Wash-Off Resistance of Traffic Paints Using an Atomizing Spray Device
D7539-10 Standard Practice for Using a Test Chamber for Humidity Conditioning of Test Panels of Pavement Marking Paints
D7602-11 Standard Practice for Installation of Vulcanized Rubber Linings
D7639-10 Standard Test Method for Determination of Zirconium Treatment Weight or Thickness on Metal Substrates by X-Ray Fluorescence
D7680-10 Standard Practice for Preparing Prints of Paste Printing Inks by a Motor-Driven Printability Tester
D7681-11 Standard Test Method for Measuring Gradation of Glass Spheres Using a Flowing Stream Digital Image Analyzer
D7682-12 Standard Test Method for Replication and Measurement of Concrete Surface Profiles Using Replica Putty
D7733-12 Standard Specification for Acrylic Dispersion Ground
D7735-11 Standard Test Method for Type A Durometer Hardness Testing of Road Marking Thermoplastic at Elevated Temperatures
D7786-12 Standard Test Method for Determining Enamel Holdout
D7801-12 Standard Terminology for Paint Brush Application Tools
D7802-12 Standard Terminology for Paint Roller Application Tools
D7803-12 Standard Practice for Preparation of Zinc (Hot-Dip Galvanized) Coated Iron and Steel Product and Hardware Surfaces for Powder Coating
D7804-12 Standard Test Method for Fiber Shedding of Paint Roller Covers
D7834-12 Standard Test Method for Filling Material Shedding of Paint Brushes
G6-07 Standard Test Method for Abrasion Resistance of Pipeline Coatings
G8-96(2010) Standard Test Methods for Cathodic Disbonding of Pipeline Coatings
G9-07 Standard Test Method for Water Penetration into Pipeline Coatings
G10-10 Standard Test Method for Specific Bendability of Pipeline Coatings
G11-04(2012) Standard Test Method for Effects of Outdoor Weathering on Pipeline Coatings
G12-07 Standard Test Method for Nondestructive Measurement of Film Thickness of Pipeline Coatings on Steel
G14-04(2010)e1 Standard Test Method for Impact Resistance of Pipeline Coatings (Falling Weight Test)
G17-07 Standard Test Method for Penetration Resistance of Pipeline Coatings (Blunt Rod)
G18-07 Standard Test Method for Joints, Fittings, and Patches in Coated Pipelines
G20-10 Standard Test Method for Chemical Resistance of Pipeline Coatings
G42-11 Standard Test Method for Cathodic Disbonding of Pipeline Coatings Subjected to Elevated Temperatures
G55-07 Standard Test Method for Evaluating Pipeline Coating Patch Materials
G62-07 Standard Test Methods for Holiday Detection in Pipeline Coatings
G70-07 Standard Test Method for Ring Bendability of Pipeline Coatings (Squeeze Test)
G80-07 Standard Test Method for Specific Cathodic Disbonding of Pipeline Coatings
G95-07 Standard Test Method for Cathodic Disbondment Test of Pipeline Coatings (Attached Cell Method)