ASTM Volume 05.03, March 2013

    Petroleum Products and Lubricants (III): D6138-D6971

    Table of Contents

    D6138-11 Standard Test Method for Determination of Corrosion-Preventive Properties of Lubricating Greases Under Dynamic Wet Conditions (Emcor Test)

    D6139-11 Standard Test Method for Determining the Aerobic Aquatic Biodegradation of Lubricants or Their Components Using the Gledhill Shake Flask

    D6158-10 Standard Specification for Mineral Hydraulic Oils

    D6159-97(2012) Standard Test Method for Determination of Hydrocarbon Impurities in Ethylene by Gas Chromatography

    D6160-98(2008) Standard Test Method for Determination of Polychlorinated Biphenyls (PCBs) in Waste Materials by Gas Chromatography

    D6184-98(2005) Standard Test Method for Oil Separation from Lubricating Grease (Conical Sieve Method)

    D6185-11 Standard Practice for Evaluating Compatibility of Binary Mixtures of Lubricating Greases

    D6186-08 Standard Test Method for Oxidation Induction Time of Lubricating Oils by Pressure Differential Scanning Calorimetry (PDSC)

    D6200-01(2012) Standard Test Method for Determination of Cooling Characteristics of Quench Oils by Cooling Curve Analysis

    D6201-04(2009) Standard Test Method for Dynamometer Evaluation of Unleaded Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D6203-06(2012) Standard Test Method for Thermal Stability of Way Lubricants

    D6217-11 Standard Test Method for Particulate Contamination in Middle Distillate Fuels by Laboratory Filtration

    D6224-09 Standard Practice for In-Service Monitoring of Lubricating Oil for Auxiliary Power Plant Equipment

    D6227-12 Standard Specification for Unleaded Aviation Gasoline Containing a Non-hydrocarbon Component

    D6258-09 Standard Test Method for Determination of Solvent Red 164 Dye Concentration in Diesel Fuels

    D6259-98(2010) Standard Practice for Determination of a Pooled Limit of Quantitation

    D6277-07(2012) Standard Test Method for Determination of Benzene in Spark-Ignition Engine Fuels Using Mid Infrared Spectroscopy

    D6278-07 Standard Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus

    D6296-98(2008) Standard Test Method for Total Olefins in Spark-ignition Engine Fuels by Multidimensional Gas Chromatography

    D6299-10e2 Standard Practice for Applying Statistical Quality Assurance and Control Charting Techniques to Evaluate Analytical Measurement System Performance

    D6300-08 Standard Practice for Determination of Precision and Bias Data for Use in Test Methods for Petroleum Products and Lubricants

    D6304-07 Standard Test Method for Determination of Water in Petroleum Products, Lubricating Oils, and Additives by Coulometric Karl Fischer Titration

    D6334-12 Standard Test Method for Sulfur in Gasoline by Wavelength Dispersive X-Ray Fluorescence

    D6335-09 Standard Test Method for Determination of High Temperature Deposits by Thermo-Oxidation Engine Oil Simulation Test

    D6351-10 Standard Test Method for Determination of Low Temperature Fluidity and Appearance of Hydraulic Fluids

    D6352-04(2009) Standard Test Method for Boiling Range Distribution of Petroleum Distillates in Boiling Range from 174 to 700°C by Gas Chromatography

    D6353-06(2011) Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production

    D6354-12 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production

    D6371-05(2010) Standard Test Method for Cold Filter Plugging Point of Diesel and Heating Fuels

    D6374-12 Standard Test Method for Volatile Matter in Green Petroleum Coke Quartz Crucible Procedure

    D6375-09 Standard Test Method for Evaporation Loss of Lubricating Oils by Thermogravimetric Analyzer (TGA) Noack Method

    D6376-10 Standard Test Method for Determination of Trace Metals in Petroleum Coke by Wavelength Dispersive X-Ray Fluorescence Spectroscopy

    D6377-10 Standard Test Method for Determination of Vapor Pressure of Crude Oil: VPCRx (Expansion Method)

    D6378-10 Standard Test Method for Determination of Vapor Pressure (VPX) of Petroleum Products, Hydrocarbons, and Hydrocarbon-Oxygenate Mixtures (Triple Expansion Method)

    D6379-11 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Aviation Fuels and Petroleum Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

    D6384-11 Standard Terminology Relating to Biodegradability and Ecotoxicity of Lubricants

    D6417-09 Standard Test Method for Estimation of Engine Oil Volatility by Capillary Gas Chromatography

    D6421-99a(2009) Standard Test Method for Evaluating Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling by Bench Procedure

    D6423-08 Standard Test Method for Determination of pHe of Ethanol, Denatured Fuel Ethanol, and Fuel Ethanol (Ed75-Ed85)

    D6424-04a(2010) Standard Practice for Octane Rating Naturally Aspirated Spark Ignition Aircraft Engines

    D6425-11 Standard Test Method for Measuring Friction and Wear Properties of Extreme Pressure (EP) Lubricating Oils Using SRV Test Machine

    D6426-07 Standard Test Method for Determining Filterability of Middle Distillate Fuel Oils

    D6439-11 Standard Guide for Cleaning, Flushing, and Purification of Steam, Gas, and Hydroelectric Turbine Lubrication Systems

    D6443-04(2010) Test Method for Determination of Calcium, Chlorine, Copper, Magnesium, Phosphorus, Sulfur, and Zinc in Unused Lubricating Oils and Additives by Wavelength Dispersive X-ray Fluorescence Spectrometry (Mathematical Correction Procedure)

    D6447-09 Standard Test Method for Hydroperoxide Number of Aviation Turbine Fuels by Voltammetric Analysis

    D6448-09 Standard Specification for Industrial Burner Fuels from Used Lubricating Oils

    D6450-05(2010) Standard Test Method for Flash Point by Continuously Closed Cup (CCCFP) Tester

    D6468-08 Standard Test Method for High Temperature Stability of Middle Distillate Fuels

    D6469-11 Standard Guide for Microbial Contamination in Fuels and Fuel Systems

    D6470-99(2010) Standard Test Method for Salt in Crude Oils (Potentiometric Method)

    D6481-99(2010) Standard Test Method for Determination of Phosphorus, Sulfur, Calcium, and Zinc in Lubrication Oils by Energy Dispersive X-ray Fluorescence Spectroscopy

    D6482-06(2011) Standard Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants by Cooling Curve Analysis with Agitation (Tensi Method)

    D6514-03(2008) Standard Test Method for High Temperature Universal Oxidation Test for Turbine Oils

    D6546-00(2010) Standard Test Methods for and Suggested Limits for Determining Compatibility of Elastomer Seals for Industrial Hydraulic Fluid Applications

    D6547-00(2010) Standard Test Method for Corrosiveness of Lubricating Fluid to Bimetallic Couple

    D6549-06(2011) Standard Test Method for Determination of Cooling Characteristics of Quenchants by Cooling Curve Analysis with Agitation (Drayton Unit)

    D6550-10 Standard Test Method for Determination of Olefin Content of Gasolines by Supercritical-Fluid Chromatography

    D6553-00(2010) Standard Test Method for Coolant Compatibility of Way Lubricants

    D6557-10a Standard Test Method for Evaluation of Rust Preventive Characteristics of Automotive Engine Oils

    D6558-00a(2010) Standard Test Method for Determination of TGA CO2 Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6559-00a(2010) Standard Test Method for Determination of Thermogravimetric (TGA) Air Reactivity of Baked Carbon Anodes and Cathode Blocks

    D6560-12 Standard Test Method for Determination of Asphaltenes (Heptane Insolubles) in Crude Petroleum and Petroleum Products

    D6584-10ae1 Standard Test Method for Determination of Total Monoglyceride, Total Diglyceride, Total Triglyceride, and Free and Total Glycerin in B-100 Biodiesel Methyl Esters by Gas Chromatography

    D6591-11 Standard Test Method for Determination of Aromatic Hydrocarbon Types in Middle Distillates—High Performance Liquid Chromatography Method with Refractive Index Detection

    D6593-10 Standard Test Method for Evaluation of Automotive Engine Oils for Inhibition of Deposit Formation in a Spark-Ignition Internal Combustion Engine Fueled with Gasoline and Operated Under Low-Temperature, Light-Duty Conditions

    D6594-08 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 135°C

    D6595-00(2011) Standard Test Method for Determination of Wear Metals and Contaminants in Used Lubricating Oils or Used Hydraulic Fluids by Rotating Disc Electrode Atomic Emission Spectrometry

    D6596-00(2011) Standard Practice for Ampulization and Storage of Gasoline and Related Hydrocarbon Materials

    D6615-11a Standard Specification for Jet B Wide-Cut Aviation Turbine Fuel

    D6616-07(2012) Standard Test Method for Measuring Viscosity at High Shear Rate by Tapered Bearing Simulator Viscometer at 100°C

    D6617-08 Standard Practice for Laboratory Bias Detection Using Single Test Result from Standard Material

    D6618-10a Standard Test Method for Evaluation of Engine Oils in Diesel Four-Stroke Cycle Supercharged 1M-PC Single Cylinder Oil Test Engine

    D6624-12 Standard Practice for Determining a Flow-Proportioned Average Property Value (FPAPV) for a Collected Batch of Process Stream Material Using Stream Analyzer Data

    D6666-04(2009) Standard Guide for Evaluation of Aqueous Polymer Quenchants

    D6667-10 Standard Test Method for Determination of Total Volatile Sulfur in Gaseous Hydrocarbons and Liquefied Petroleum Gases by Ultraviolet Fluorescence

    D6668-01(2010) Standard Test Method for Discrimination Between Flammability Ratings of F = 0 and F = 1

    D6681-10a Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine-Caterpillar 1P Test Procedure

    D6708-08 Standard Practice for Statistical Assessment and Improvement of Expected Agreement Between Two Test Methods that Purport to Measure the Same Property of a Material

    D6709-11 Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence VIII Spark-Ignition Engine (CLR Oil Test Engine)

    D6710-02(2012) Standard Guide for Evaluation of Hydrocarbon-Based Quench Oil

    D6728-11 Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry

    D6729-04(2009) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100 Metre Capillary High Resolution Gas Chromatography

    D6730-01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 100–Metre Capillary (with Precolumn) High-Resolution Gas Chromatography

    D6731-01(2011) Standard Test Method for Determining the Aerobic, Aquatic Biodegradability of Lubricants or Lubricant Components in a Closed Respirometer

    D6732-04(2010) Standard Test Method for Determination of Copper in Jet Fuels by Graphite Furnace Atomic Absorption Spectrometry

    D6733-01(2011) Standard Test Method for Determination of Individual Components in Spark Ignition Engine Fuels by 50-Metre Capillary High Resolution Gas Chromatography

    D6743-11 Standard Test Method for Thermal Stability of Organic Heat Transfer Fluids

    D6744-06(2011)e1 Standard Test Method for Determination of the Thermal Conductivity of Anode Carbons by the Guarded Heat Flow Meter Technique

    D6745-11 Standard Test Method for Linear Thermal Expansion of Electrode Carbons

    D6748-02a(2012) Standard Test Method for Determination of Potential Instability of Middle Distillate Fuels Caused by the Presence of Phenalenes and Phenalenones (Rapid Method by Portable Spectrophotometer)

    D6749-02(2012) Standard Test Method for Pour Point of Petroleum Products (Automatic Air Pressure Method)

    D6750-10b Standard Test Methods for Evaluation of Engine Oils in a High-Speed, Single-Cylinder Diesel Engine—1K Procedure (0.4 % Fuel Sulfur) and 1N Procedure (0.04 % Fuel Sulfur)

    D6751-12 Standard Specification for Biodiesel Fuel Blend Stock (B100) for Middle Distillate Fuels

    D6756-10 Standard Test Method for Determination of the Red Dye Concentration and Estimation of the ASTM Color of Diesel Fuel and Heating Oil Using a Portable Visible Spectrophotometer

    D6791-11 Standard Test Method for Determination of Grain Stability of Calcined Petroleum Coke

    D6792-07 Standard Practice for Quality System in Petroleum Products and Lubricants Testing Laboratories

    D6793-02(2012) Standard Test Method for Determination of Isothermal Secant and Tangent Bulk Modulus

    D6794-10 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Various Amounts of Water and a Long (6-h) Heating Time

    D6795-10 Standard Test Method for Measuring the Effect on Filterability of Engine Oils After Treatment with Water and Dry Ice and a Short (30-min) Heating Time

    D6810-07 Standard Test Method for Measurement of Hindered Phenolic Antioxidant Content in Non-Zinc Turbine Oils by Linear Sweep Voltammetry

    D6811-02(2007)e1 Standard Test Method for Measurement of Thermal Stability of Aviation Turbine Fuels under Turbulent Flow Conditions (HiReTS Method)

    D6812-04a(2010) Standard Practice for Ground-Based Octane Rating Procedures for Turbocharged/Supercharged Spark Ignition Aircraft Engines

    D6813-02a(2007) Standard Guide for Performance Evaluation of Hydraulic Fluids for Piston Pumps

    D6821-02(2007) Standard Test Method for Low Temperature Viscosity of Drive Line Lubricants in a Constant Shear Stress Viscometer

    D6822-12b Standard Test Method for Density, Relative Density, and API Gravity of Crude Petroleum and Liquid Petroleum Products by Thermohydrometer Method

    D6823-08 Standard Specification for Commercial Boiler Fuels With Used Lubricating Oils

    D6824-07 Standard Test Method for Determining Filterability of Aviation Turbine Fuel

    D6837-10 Standard Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VIB Spark Ignition Engine

    D6838-04(2010) Standard Test Method for Cummins M11 High Soot Test

    D6839-02(2007) Standard Test Method for Hydrocarbon Types, Oxygenated Compounds and Benzene in Spark Ignition Engine Fuels by Gas Chromatography

    D6849-02(2012) Standard Practice for Storage and Use of Liquefied Petroleum Gases (LPG) in Sample Cylinders for LPG Test Methods

    D6891-10a Standard Test Method for Evaluation of Automotive Engine Oils in the Sequence IVA Spark-Ignition Engine

    D6892-03(2008) Standard Test Method for Pour Point of Petroleum Products (Robotic Tilt Method)

    D6894-11 Standard Test Method for Evaluation of Aeration Resistance of Engine Oils in Direct-Injected Turbocharged Automotive Diesel Engine

    D6895-06(2012) Standard Test Method for Rotational Viscosity of Heavy Duty Diesel Drain Oils at 100°C

    D6896-03(2007) Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

    D6897-09 Standard Test Method for Vapor Pressure of Liquefied Petroleum Gases (LPG) (Expansion Method)

    D6898-03(2010) Standard Test Method for Evaluating Diesel Fuel Lubricity by an Injection Pump Rig

    D6920-07 Standard Test Method for Total Sulfur in Naphthas, Distillates, Reformulated Gasolines, Diesels, Biodiesels, and Motor Fuels by Oxidative Combustion and Electrochemical Detection

    D6922-11 Standard Test Method for Determination of Homogeneity and Miscibility in Automotive Engine Oils

    D6923-10a Standard Test Method for Evaluation of Engine Oils in a High Speed, Single-Cylinder Diesel Engine—Caterpillar 1R Test Procedure

    D6969-03(2008) Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis

    D6970-03(2008) Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis

    D6971-09 Standard Test Method for Measurement of Hindered Phenolic and Aromatic Amine Antioxidant Content in Non-zinc Turbine Oils by Linear Sweep Voltammetry

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2013
       Standards: 125
       Pages: 1652

    - 2012
       Standards: 125
       Pages: 1654