ASTM Volume 05.02, March 2013

    Petroleum Products and Lubricants (II): D3711-D6122

    Table of Contents

    D3711-95(2009) Standard Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors

    D3712-05(2011) Standard Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography

    D3764-09 Standard Practice for Validation of the Performance of Process Stream Analyzer Systems

    D3825-09 Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique

    D3827-92(2012) Standard Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids

    D3828-12 Standard Test Methods for Flash Point by Small Scale Closed Cup Tester

    D3829-02(2007) Standard Test Method for Predicting the Borderline Pumping Temperature of Engine Oil

    D3831-12 Standard Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy

    D3944-88(2005) Standard Test Method for Solidification Point of Petroleum Wax

    D3948-11 Standard Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer

    D4006-11(2012) Standard Test Method for Water in Crude Oil by Distillation

    D4007-11 Standard Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)

    D4042-93(2009) Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils

    D4045-04(2010) Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry

    D4046-11 Standard Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry

    D4047-00(2011) Standard Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method

    D4048-10 Standard Test Method for Detection of Copper Corrosion from Lubricating Grease

    D4049-06(2011) Standard Test Method for Determining the Resistance of Lubricating Grease to Water Spray

    D4051-10 Standard Practice for Preparation of Low-Pressure Gas Blends

    D4052-11 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter

    D4053-04(2009) Standard Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy

    D4054-09 Standard Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives

    D4055-04(2009) Standard Test Method for Pentane Insolubles by Membrane Filtration

    D4056-01(2010) Standard Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants

    D4057-06(2011) Standard Practice for Manual Sampling of Petroleum and Petroleum Products

    D4072-98(2008) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch

    D4170-10 Standard Test Method for Fretting Wear Protection by Lubricating Greases

    D4171-11 Standard Specification for Fuel System Icing Inhibitors

    D4172-94(2010) Standard Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)

    D4174-89(2010) Standard Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems

    D4175-09ae3 Standard Terminology Relating to Petroleum, Petroleum Products, and Lubricants

    D4176-04(2009) Standard Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)

    D4177-95(2010) Standard Practice for Automatic Sampling of Petroleum and Petroleum Products

    D4178-82(2012) Standard Practice for Calibrating Moisture Analyzers

    D4289-03(2008) Standard Test Method for Elastomer Compatibility of Lubricating Greases and Fluids

    D4290-07(2012) Standard Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions

    D4291-04(2009) Standard Test Method for Trace Ethylene Glycol in Used Engine Oil

    D4292-10 Standard Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke

    D4293-83(2008) Standard Specification for Phosphate Ester Based Fluids for Turbine Lubrication

    D4294-10 Standard Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry

    D4296-83(2009) Standard Practice for Sampling Pitch

    D4304-06a Standard Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines

    D4306-12b Standard Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination

    D4307-99(2010) Standard Practice for Preparation of Liquid Blends for Use as Analytical Standards

    D4308-10 Standard Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter

    D4310-10 Standard Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils

    D4312-95a(2010) Standard Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)

    D4377-00(2011) Standard Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration

    D4378-08 Standard Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines

    D4418-00(2011) Standard Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines

    D4419-90(2010) Standard Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)

    D4422-03(2008) Standard Test Method for Ash in Analysis of Petroleum Coke

    D4423-10 Standard Test Method for Determination of Carbonyls In C4 Hydrocarbons

    D4424-09 Standard Test Method for Butylene Analysis by Gas Chromatography

    D4425-09 Standard Test Method for Oil Separation From Lubricating Grease by Centrifuging (Koppers Method)

    D4485-11c Standard Specification for Performance of Active API Service Category Engine Oils

    D4486-10 Standard Test Method for Kinematic Viscosity of Volatile and Reactive Liquids

    D4529-01(2011) Standard Test Method for Estimation of Net Heat of Combustion of Aviation Fuels

    D4530-11 Standard Test Method for Determination of Carbon Residue (Micro Method)

    D4539-10 Standard Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)

    D4616-95(2008) Standard Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch

    D4625-04(2009) Standard Test Method for Distillate Fuel Storage Stability at 43°C (110°F)

    D4626-95(2010) Standard Practice for Calculation of Gas Chromatographic Response Factors

    D4627-12 Standard Test Method for Iron Chip Corrosion for Water–Miscible Metalworking Fluids

    D4628-05(2011)e1 Standard Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry

    D4629-12 Standard Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection

    D4636-09 Standard Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils

    D4682-08 Standard Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4683-10 Standard Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 °C

    D4684-08 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature

    D4693-07(2012) Standard Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings

    D4715-98(2012) Standard Test Method for Coking Value of Tar and Pitch (Alcan)

    D4737-10 Standard Test Method for Calculated Cetane Index by Four Variable Equation

    D4739-11 Standard Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration

    D4740-04(2009) Standard Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test

    D4741-06 Standard Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer

    D4742-08e1 Standard Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)

    D4746-98(2008) Standard Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration

    D4806-11a Standard Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel

    D4807-05(2010) Standard Test Method for Sediment in Crude Oil by Membrane Filtration

    D4808-01(2012) Standard Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy

    D4809-09ae1 Standard Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)

    D4814-11b Standard Specification for Automotive Spark-Ignition Engine Fuel

    D4815-09 Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography

    D4857-08 Standard Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards

    D4858-08 Standard Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines

    D4859-08 Standard Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC

    D4860-08 Standard Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)

    D4863-10 Standard Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants

    D4864-90(2005) Standard Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography

    D4865-09 Standard Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems

    D4868-00(2010) Standard Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels

    D4870-09 Standard Test Method for Determination of Total Sediment in Residual Fuels

    D4871-11 Standard Guide for Universal Oxidation/Thermal Stability Test Apparatus

    D4892-89(2009) Standard Test Method for Density of Solid Pitch (Helium Pycnometer Method)

    D4893-94(2009) Standard Test Method for Determination of Pitch Volatility

    D4898-90(2010)e1 Standard Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis

    D4927-10 Standard Test Methods for Elemental Analysis of Lubricant and Additive Components—Barium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy

    D4928-11 Standard Test Method for Water in Crude Oils by Coulometric Karl Fischer Titration

    D4929-07 Standard Test Methods for Determination of Organic Chloride Content in Crude Oil

    D4930-06(2011) Standard Test Method for Dust Control Material on Calcined Petroleum Coke

    D4931-06(2011) Standard Test Method for Gross Moisture in Green Petroleum Coke

    D4950-08 Standard Classification and Specification of Automotive Service Greases

    D4951-09 Standard Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry

    D4952-12 Standard Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)

    D4953-06(2012) Standard Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)

    D4998-11 Standard Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids

    D5000-05 Standard Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor

    D5001-10 Standard Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)

    D5002-99(2010) Standard Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer

    D5003-06a(2011) Standard Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke

    D5004-11 Standard Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement

    D5006-11 Standard Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels

    D5018-89(2009) Standard Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches

    D5056-04(2010) Standard Test Method for Trace Metals in Petroleum Coke by Atomic Absorption

    D5059-07 Standard Test Methods for Lead in Gasoline by X-Ray Spectroscopy

    D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique

    D5134-98(2008)e1 Standard Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography

    D5182-97(2008) Standard Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)

    D5183-05(2011) Standard Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine

    D5184-12 Standard Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry

    D5185-09 Standard Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5186-03(2009) Standard Test Method for Determination of Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels by Supercritical Fluid Chromatography

    D5187-10 Standard Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction

    D5188-10a Standard Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)

    D5191-12 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method)

    D5234-92(2012) Standard Guide for Analysis of Ethylene Product

    D5236-03(2011) Standard Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)

    D5273-92(2012) Standard Guide for Analysis of Propylene Concentrates

    D5274-00(2009) Standard Guide for Analysis of 1,3-Butadiene Product

    D5275-11 Standard Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids

    D5291-10 Standard Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants

    D5292-99(2009) Standard Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy

    D5293-10e1 Standard Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between –5 and –35°C Using Cold-Cranking Simulator

    D5303-92(2012) Standard Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography

    D5304-11 Standard Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure

    D5305-97(2007) Standard Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor

    D5306-92(2007) Standard Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids

    D5372-04(2009) Standard Guide for Evaluation of Hydrocarbon Heat Transfer Fluids

    D5384-11 Standard Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)

    D5441-98(2008)e1 Standard Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography

    D5442-93(2008) Standard Test Method for Analysis of Petroleum Waxes by Gas Chromatography

    D5443-04(2009)e1 Standard Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200°C by Multi-Dimensional Gas Chromatography

    D5452-12 Standard Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration

    D5453-09 Standard Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence

    D5481-10 Standard Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer

    D5482-07 Standard Test Method for Vapor Pressure of Petroleum Products (Mini Method—Atmospheric)

    D5483-05(2010) Standard Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry

    D5500-98(2008) Standard Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation

    D5501-09 Standard Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography

    D5502-00(2010) Standard Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry

    D5534-94(2011)e1 Standard Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids

    D5579-12 Standard Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test

    D5580-02(2007) Standard Test Method for Determination of Benzene, Toluene, Ethylbenzene, p/m-Xylene, o-Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography

    D5598-01(2012) Standard Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling

    D5599-00(2010) Standard Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection

    D5600-09 Standard Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)

    D5619-00(2011) Standard Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine

    D5621-07 Standard Test Method for Sonic Shear Stability of Hydraulic Fluids

    D5622-95(2011) Standard Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis

    D5623-94(2009) Standard Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection

    D5662-12 Standard Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers

    D5704-12 Standard Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles

    D5705-12 Standard Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils

    D5706-11 Standard Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5707-11 Standard Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine

    D5708-11 Standard Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry

    D5709-09 Standard Test Method for Sieve Analysis of Petroleum Coke

    D5760-09 Standard Specification for Performance of Manual Transmission Gear Lubricants

    D5761-96(2012) Standard Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials

    D5762-12 Standard Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence

    D5763-11 Standard Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware

    D5769-10 Standard Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry

    D5770-11 Standard Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing

    D5771-12 Standard Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)

    D5772-10 Standard Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)

    D5773-10 Standard Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)

    D5797-07 Standard Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines

    D5798-11 Standard Specification for Ethanol Fuel Blends for Flexible-Fuel Automotive Spark-Ignition Engines

    D5799-95(2009) Standard Test Method for Determination of Peroxides in Butadiene

    D5800-10 Standard Test Method for Evaporation Loss of Lubricating Oils by the Noack Method

    D5842-04(2009) Standard Practice for Sampling and Handling of Fuels for Volatility Measurement

    D5845-01(2011) Standard Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and tert-Butanol in Gasoline by Infrared Spectroscopy

    D5846-07(2012) Standard Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus

    D5853-11 Standard Test Method for Pour Point of Crude Oils

    D5854-96(2010) Standard Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products

    D5863-00a(2011) Standard Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry

    D5864-11 Standard Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components

    D5949-10 Standard Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)

    D5950-12 Standard Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)

    D5966-10 Standard Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine

    D5967-12 Standard Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine

    D5968-06 Standard Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121°C

    D5969-11e1 Standard Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments

    D5972-05(2010) Standard Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)

    D5983-06(2011) Standard Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel

    D5984-11 Standard Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration

    D5985-02(2008) Standard Test Method for Pour Point of Petroleum Products (Rotational Method)

    D5986-96(2011) Standard Test Method for Determination of Oxygenates, Benzene, Toluene, C8-C 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy

    D6006-11 Standard Guide for Assessing Biodegradability of Hydraulic Fluids

    D6021-12 Standard Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection

    D6022-06(2012) Standard Practice for Calculation of Permanent Shear Stability Index

    D6045-09 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

    D6046-02(2012) Standard Classification of Hydraulic Fluids for Environmental Impact

    D6074-08 Standard Guide for Characterizing Hydrocarbon Lubricant Base Oils

    D6078-04(2010) Standard Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)

    D6079-11 Standard Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)

    D6080-12 Standard Practice for Defining the Viscosity Characteristics of Hydraulic Fluids

    D6081-98(2009) Standard Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation

    D6082-12 Standard Test Method for High Temperature Foaming Characteristics of Lubricating Oils

    D6120-97(2012) Standard Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature

    D6121-12 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles

    D6122-10 Standard Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2013
       Standards: 214
       Pages: 1802

    - 2012
       Standards: 214
       Pages: 1800