ASTM Volume 04.02, October 2013

    Concrete and Aggregates

    Table of Contents

    C29/C29M-09 Standard Test Method for Bulk Density ("Unit Weight") and Voids in Aggregate

    C31/C31M-12 Standard Practice for Making and Curing Concrete Test Specimens in the Field

    C33/C33M-13 Standard Specification for Concrete Aggregates

    C39/C39M-12a Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens

    C40/C40M-11 Standard Test Method for Organic Impurities in Fine Aggregates for Concrete

    C42/C42M-13 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete

    C70-13 Standard Test Method for Surface Moisture in Fine Aggregate

    C78/C78M-10e1 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam with Third-Point Loading)

    C87/C87M-10 Standard Test Method for Effect of Organic Impurities in Fine Aggregate on Strength of Mortar

    C88-13 Standard Test Method for Soundness of Aggregates by Use of Sodium Sulfate or Magnesium Sulfate

    C94/C94M-13a Standard Specification for Ready-Mixed Concrete

    C117-13 Standard Test Method for Materials Finer than 75-μm (No. 200) Sieve in Mineral Aggregates by Washing

    C123/C123M-12 Standard Test Method for Lightweight Particles in Aggregate

    C125-13a Standard Terminology Relating to Concrete and Concrete Aggregates

    C127-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Coarse Aggregate

    C128-12 Standard Test Method for Density, Relative Density (Specific Gravity), and Absorption of Fine Aggregate

    C131-06 Standard Test Method for Resistance to Degradation of Small-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C136-06 Standard Test Method for Sieve Analysis of Fine and Coarse Aggregates

    C138/C138M-13 Standard Test Method for Density (Unit Weight), Yield, and Air Content (Gravimetric) of Concrete

    C142/C142M-10 Standard Test Method for Clay Lumps and Friable Particles in Aggregates

    C143/C143M-12 Standard Test Method for Slump of Hydraulic-Cement Concrete

    C156-11 Standard Test Method for Water Loss [from a Mortar Specimen] Through Liquid Membrane-Forming Curing Compounds for Concrete

    C157/C157M-08 Standard Test Method for Length Change of Hardened Hydraulic-Cement Mortar and Concrete

    C171-07 Standard Specification for Sheet Materials for Curing Concrete

    C172/C172M-10 Standard Practice for Sampling Freshly Mixed Concrete

    C173/C173M-12 Standard Test Method for Air Content of Freshly Mixed Concrete by the Volumetric Method

    C174/C174M-13 Standard Test Method for Measuring Thickness of Concrete Elements Using Drilled Concrete Cores

    C192/C192M-13 Standard Practice for Making and Curing Concrete Test Specimens in the Laboratory

    C215-08 Standard Test Method for Fundamental Transverse, Longitudinal, and Torsional Frequencies of Concrete Specimens

    C227-10 Standard Test Method for Potential Alkali Reactivity of Cement-Aggregate Combinations (Mortar-Bar Method)

    C231/C231M-10 Standard Test Method for Air Content of Freshly Mixed Concrete by the Pressure Method

    C232/C232M-13a Standard Test Method for Bleeding of Concrete

    C233/C233M-11 Standard Test Method for Air-Entraining Admixtures for Concrete

    C260/C260M-10a Standard Specification for Air-Entraining Admixtures for Concrete

    C289-07 Standard Test Method for Potential Alkali-Silica Reactivity of Aggregates (Chemical Method)

    C293/C293M-10 Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

    C294-12 Standard Descriptive Nomenclature for Constituents of Concrete Aggregates

    C295/C295M-12 Standard Guide for Petrographic Examination of Aggregates for Concrete

    C309-11 Standard Specification for Liquid Membrane-Forming Compounds for Curing Concrete

    C311/C311M-13 Standard Test Methods for Sampling and Testing Fly Ash or Natural Pozzolans for Use in Portland-Cement Concrete

    C330/C330M-09 Standard Specification for Lightweight Aggregates for Structural Concrete

    C331/C331M-10 Standard Specification for Lightweight Aggregates for Concrete Masonry Units

    C332-09 Standard Specification for Lightweight Aggregates for Insulating Concrete

    C341/C341M-06 Standard Practice for Length Change of Cast, Drilled, or Sawed Specimens of Hydraulic-Cement Mortar and Concrete

    C387/C387M-11b Standard Specification for Packaged, Dry, Combined Materials for Concrete and High Strength Mortar

    C403/C403M-08 Standard Test Method for Time of Setting of Concrete Mixtures by Penetration Resistance

    C418-12 Standard Test Method for Abrasion Resistance of Concrete by Sandblasting

    C441/C441M-11 Standard Test Method for Effectiveness of Pozzolans or Ground Blast-Furnace Slag in Preventing Excessive Expansion of Concrete Due to the Alkali-Silica Reaction

    C457/C457M-12 Standard Test Method for Microscopical Determination of Parameters of the Air-Void System in Hardened Concrete

    C469/C469M-10 Standard Test Method for Static Modulus of Elasticity and Poisson's Ratio of Concrete in Compression

    C470/C470M-09 Standard Specification for Molds for Forming Concrete Test Cylinders Vertically

    C494/C494M-13 Standard Specification for Chemical Admixtures for Concrete

    C495/C495M-12 Standard Test Method for Compressive Strength of Lightweight Insulating Concrete

    C496/C496M-11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens

    C511-09 Standard Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes

    C512/C512M-10 Standard Test Method for Creep of Concrete in Compression

    C513-11 Standard Test Method for Obtaining and Testing Specimens of Hardened Lightweight Insulating Concrete for Compressive Strength

    C535-12 Standard Test Method for Resistance to Degradation of Large-Size Coarse Aggregate by Abrasion and Impact in the Los Angeles Machine

    C566-13 Standard Test Method for Total Evaporable Moisture Content of Aggregate by Drying

    C567/C567M-11 Standard Test Method for Determining Density of Structural Lightweight Concrete

    C586-11 Standard Test Method for Potential Alkali Reactivity of Carbonate Rocks as Concrete Aggregates (Rock-Cylinder Method)

    C597-09 Standard Test Method for Pulse Velocity Through Concrete

    C617/C617M-12 Standard Practice for Capping Cylindrical Concrete Specimens

    C618-12a Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete

    C637-09 Standard Specification for Aggregates for Radiation-Shielding Concrete

    C638-09 Standard Descriptive Nonmenclature of Constituents of Aggregates for Radiation-Shielding Concrete

    C641-09 Standard Test Method for Iron Staining Materials in Lightweight Concrete Aggregates

    C642-13 Standard Test Method for Density, Absorption, and Voids in Hardened Concrete

    C666/C666M-03(2008) Standard Test Method for Resistance of Concrete to Rapid Freezing and Thawing

    C670-13 Standard Practice for Preparing Precision and Bias Statements for Test Methods for Construction Materials

    C672/C672M-12 Standard Test Method for Scaling Resistance of Concrete Surfaces Exposed to Deicing Chemicals

    C685/C685M-11 Standard Specification for Concrete Made by Volumetric Batching and Continuous Mixing

    C702/C702M-11 Standard Practice for Reducing Samples of Aggregate to Testing Size

    C779/C779M-12 Standard Test Method for Abrasion Resistance of Horizontal Concrete Surfaces

    C796/C796M-12 Standard Test Method for Foaming Agents for Use in Producing Cellular Concrete Using Preformed Foam

    C802-09a Standard Practice for Conducting an Interlaboratory Test Program to Determine the Precision of Test Methods for Construction Materials

    C803/C803M-03(2010) Standard Test Method for Penetration Resistance of Hardened Concrete

    C805/C805M-13 Standard Test Method for Rebound Number of Hardened Concrete

    C823/C823M-12 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions

    C827/C827M-10 Standard Test Method for Change in Height at Early Ages of Cylindrical Specimens of Cementitious Mixtures

    C856-11 Standard Practice for Petrographic Examination of Hardened Concrete

    C869/C869M-11 Standard Specification for Foaming Agents Used in Making Preformed Foam for Cellular Concrete

    C873/C873M-10a Standard Test Method for Compressive Strength of Concrete Cylinders Cast in Place in Cylindrical Molds

    C876-09 Standard Test Method for Corrosion Potentials of Uncoated Reinforcing Steel in Concrete

    C878/C878M-09 Standard Test Method for Restrained Expansion of Shrinkage-Compensating Concrete

    C881/C881M-10 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete

    C882/C882M-13 Standard Test Method for Bond Strength of Epoxy-Resin Systems Used With Concrete By Slant Shear

    C884/C884M-98(2010) Standard Test Method for Thermal Compatibility Between Concrete and an Epoxy-Resin Overlay

    C900-13 Standard Test Method for Pullout Strength of Hardened Concrete

    C918/C918M-07 Standard Test Method for Measuring Early-Age Compressive Strength and Projecting Later-Age Strength

    C928/C928M-09 Standard Specification for Packaged, Dry, Rapid-Hardening Cementitious Materials for Concrete Repairs

    C937-10 Standard Specification for Grout Fluidifier for Preplaced-Aggregate Concrete

    C938-10 Standard Practice for Proportioning Grout Mixtures for Preplaced-Aggregate Concrete

    C939-10 Standard Test Method for Flow of Grout for Preplaced-Aggregate Concrete (Flow Cone Method)

    C940-10a Standard Test Method for Expansion and Bleeding of Freshly Mixed Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C941-10 Standard Test Method for Water Retentivity of Grout Mixtures for Preplaced-Aggregate Concrete in the Laboratory

    C942-10 Standard Test Method for Compressive Strength of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C943-10 Standard Practice for Making Test Cylinders and Prisms for Determining Strength and Density of Preplaced-Aggregate Concrete in the Laboratory

    C944/C944M-12 Standard Test Method for Abrasion Resistance of Concrete or Mortar Surfaces by the Rotating-Cutter Method

    C953-10 Standard Test Method for Time of Setting of Grouts for Preplaced-Aggregate Concrete in the Laboratory

    C979/C979M-10 Standard Specification for Pigments for Integrally Colored Concrete

    C989/C989M-12a Standard Specification for Slag Cement for Use in Concrete and Mortars

    C1017/C1017M-07 Standard Specification for Chemical Admixtures for Use in Producing Flowing Concrete

    C1040/C1040M-08 Standard Test Methods for In-Place Density of Unhardened and Hardened Concrete, Including Roller Compacted Concrete, By Nuclear Methods

    C1059/C1059M-99(2008) Standard Specification for Latex Agents for Bonding Fresh To Hardened Concrete

    C1064/C1064M-12 Standard Test Method for Temperature of Freshly Mixed Hydraulic-Cement Concrete

    C1067-12 Standard Practice for Conducting a Ruggedness Evaluation or Screening Program for Test Methods for Construction Materials

    C1073-12 Standard Test Method for Hydraulic Activity of Slag Cement by Reaction with Alkali

    C1074-11 Standard Practice for Estimating Concrete Strength by the Maturity Method

    C1077-13b Standard Practice for Agencies Testing Concrete and Concrete Aggregates for Use in Construction and Criteria for Testing Agency Evaluation

    C1084-10 Standard Test Method for Portland-Cement Content of Hardened Hydraulic-Cement Concrete

    C1090-10 Standard Test Method for Measuring Changes in Height of Cylindrical Specimens of Hydraulic-Cement Grout

    C1105-08a Standard Test Method for Length Change of Concrete Due to Alkali-Carbonate Rock Reaction

    C1107/C1107M-13 Standard Specification for Packaged Dry, Hydraulic-Cement Grout (Nonshrink)

    C1116/C1116M-10a Standard Specification for Fiber-Reinforced Concrete

    C1138M-12 Standard Test Method for Abrasion Resistance of Concrete (Underwater Method)

    C1140/C1140M-11 Standard Practice for Preparing and Testing Specimens from Shotcrete Test Panels

    C1141/C1141M-08 Standard Specification for Admixtures for Shotcrete

    C1152/C1152M-04(2012)e1 Standard Test Method for Acid-Soluble Chloride in Mortar and Concrete

    C1170/C1170M-08 Standard Test Method for Determining Consistency and Density of Roller-Compacted Concrete Using a Vibrating Table

    C1176/C1176M-08 Standard Practice for Making Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Table

    C1181-00(2012) Standard Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts

    C1202-12 Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration

    C1218/C1218M-99(2008) Standard Test Method for Water-Soluble Chloride in Mortar and Concrete

    C1231/C1231M-12 Standard Practice for Use of Unbonded Caps in Determination of Compressive Strength of Hardened Concrete Cylinders

    C1240-12 Standard Specification for Silica Fume Used in Cementitious Mixtures

    C1245/C1245M-12 Standard Test Method for Determining Relative Bond Strength Between Hardened Roller Compacted Concrete Lifts (Point Load Test)

    C1252-06 Standard Test Methods for Uncompacted Void Content of Fine Aggregate (as Influenced by Particle Shape, Surface Texture, and Grading)

    C1260-07 Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method)

    C1293-08b Standard Test Method for Determination of Length Change of Concrete Due to Alkali-Silica Reaction

    C1315-11 Standard Specification for Liquid Membrane-Forming Compounds Having Special Properties for Curing and Sealing Concrete

    C1362-09 Standard Test Method for Flow of Freshly Mixed Hydraulic Cement Concrete

    C1383-04(2010) Standard Test Method for Measuring the P-Wave Speed and the Thickness of Concrete Plates Using the Impact-Echo Method

    C1385/C1385M-10 Standard Practice for Sampling Materials for Shotcrete

    C1399/C1399M-10 Standard Test Method for Obtaining Average Residual-Strength of Fiber-Reinforced Concrete

    C1435/C1435M-08 Standard Practice for Molding Roller-Compacted Concrete in Cylinder Molds Using a Vibrating Hammer

    C1436-08 Standard Specification for Materials for Shotcrete

    C1438-11a Standard Specification for Latex and Powder Polymer Modifiers in Hydraulic Cement Concrete and Mortar

    C1439-08a Standard Test Methods for Evaluating Polymer Modifiers in Mortar and Concrete

    C1451-11 Standard Practice for Determining Uniformity of Ingredients of Concrete From a Single Source

    C1480/C1480M-07(2012) Standard Specification for Packaged, Pre-Blended, Dry, Combined Materials for Use in Wet or Dry Shotcrete Application

    C1524-02a(2010) Standard Test Method for Water-Extractable Chloride in Aggregate (Soxhlet Method)

    C1542/C1542M-02(2010) Standard Test Method for Measuring Length of Concrete Cores

    C1543-10a Standard Test Method for Determining the Penetration of Chloride Ion into Concrete by Ponding

    C1550-12a Standard Test Method for Flexural Toughness of Fiber Reinforced Concrete (Using Centrally Loaded Round Panel)

    C1556-11a Standard Test Method for Determining the Apparent Chloride Diffusion Coefficient of Cementitious Mixtures by Bulk Diffusion

    C1567-13 Standard Test Method for Determining the Potential Alkali-Silica Reactivity of Combinations of Cementitious Materials and Aggregate (Accelerated Mortar-Bar Method)

    C1579-13 Standard Test Method for Evaluating Plastic Shrinkage Cracking of Restrained Fiber Reinforced Concrete (Using a Steel Form Insert)

    C1580-09e1 Standard Test Method for Water-Soluble Sulfate in Soil

    C1581/C1581M-09a Standard Test Method for Determining Age at Cracking and Induced Tensile Stress Characteristics of Mortar and Concrete under Restrained Shrinkage

    C1582/C1582M-11 Standard Specification for Admixtures to Inhibit Chloride-Induced Corrosion of Reinforcing Steel in Concrete

    C1583/C1583M-13 Standard Test Method for Tensile Strength of Concrete Surfaces and the Bond Strength or Tensile Strength of Concrete Repair and Overlay Materials by Direct Tension (Pull-off Method)

    C1585-13 Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes

    C1602/C1602M-12 Standard Specification for Mixing Water Used in the Production of Hydraulic Cement Concrete

    C1603-10 Standard Test Method for Measurement of Solids in Water

    C1604/C1604M-05(2012) Standard Test Method for Obtaining and Testing Drilled Cores of Shotcrete

    C1609/C1609M-12 Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

    C1610/C1610M-10 Standard Test Method for Static Segregation of Self-Consolidating Concrete Using Column Technique

    C1611/C1611M-09be1 Standard Test Method for Slump Flow of Self-Consolidating Concrete

    C1621/C1621M-09b Standard Test Method for Passing Ability of Self-Consolidating Concrete by J-Ring

    C1622/C1622M-10 Standard Specification for Cold-Weather Admixture Systems

    C1646/C1646M-08a Standard Practice for Making and Curing Test Specimens for Evaluating Resistance of Coarse Aggregate to Freezing and Thawing in Air-Entrained Concrete

    C1679-09 Standard Practice for Measuring Hydration Kinetics of Hydraulic Cementitious Mixtures Using Isothermal Calorimetry

    C1688/C1688M-13 Standard Test Method for Density and Void Content of Freshly Mixed Pervious Concrete

    C1697-10 Standard Specification for Blended Supplementary Cementitious Materials

    C1698-09 Standard Test Method for Autogenous Strain of Cement Paste and Mortar

    C1701/C1701M-09 Standard Test Method for Infiltration Rate of In Place Pervious Concrete

    C1708-12 Standard Test Methods for Self-leveling Mortars Containing Hydraulic Cements

    C1709-11 Standard Guide for Evaluation of Alternative Supplementary Cementitious Materials (ASCM) for Use in Concrete

    C1712-09 Standard Test Method for Rapid Assessment of Static Segregation Resistance of Self-Consolidating Concrete Using Penetration Test

    C1723-10 Standard Guide for Examination of Hardened Concrete Using Scanning Electron Microscopy

    C1740-10 Standard Practice for Evaluating the Condition of Concrete Plates Using the Impulse-Response Method

    C1741-12 Standard Test Method for Bleed Stability of Cementitious Post-Tensioning Tendon Grout

    C1747/C1747M-11 Standard Test Method for Determining Potential Resistance to Degradation of Pervious Concrete by Impact and Abrasion

    C1754/C1754M-12 Standard Test Method for Density and Void Content of Hardened Pervious Concrete

    C1757-13 Standard Test Method for ?Determination of One-Point, Bulk Water Sorption of Dried Concrete

    C1758/C1758M-13 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete

    C1760-12 Standard Test Method for Bulk Electrical Conductivity of Hardened Concrete

    C1761/C1761M-13b Standard Specification for Lightweight Aggregate for Internal Curing of Concrete

    C1768/C1768M-12 Standard Practice for Accelerated Curing of Concrete Cylinders

    E329-13a Standard Specification for Agencies Engaged in Construction Inspection, Testing, or Special Inspection

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2013
       Standards: 178
       Pages: 1068

    - 2012
       Standards: 181
       Pages: 1022