ASTM Volume 01.08, January 2013

    Fasteners; Rolling Element Bearings

    Table of Contents

    A31-04(2009) Standard Specification for Steel Rivets and Bars for Rivets, Pressure Vessels

    A307-10 Standard Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength

    A325M-09 Standard Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength [Metric]

    A325-10 Standard Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    A354-11 Standard Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners

    A394-08e1 Standard Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare

    A449-10 Standard Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use

    A489-12 Standard Specification for Carbon Steel Lifting Eyes

    A490-12 Standard Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    A490M-12 Standard Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)

    A502-03(2009) Standard Specification for Rivets, Steel, Structural

    A563-07a Standard Specification for Carbon and Alloy Steel Nuts

    A563M-07 Standard Specification for Carbon and Alloy Steel Nuts [Metric]

    A574-12 Standard Specification for Alloy Steel Socket-Head Cap Screws

    A574M-12 Standard Specification for Alloy Steel Socket-Head Cap Screws (Metric)

    F432-10 Standard Specification for Roof and Rock Bolts and Accessories

    F436-11 Standard Specification for Hardened Steel Washers

    F436M-11 Standard Specification for Hardened Steel Washers [Metric]

    F467-08e1 Standard Specification for Nonferrous Nuts for General Use

    F467M-06a(2012) Standard Specification for Nonferrous Nuts for General Use (Metric)

    F468M-06(2012) Standard Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)

    F468-12 Standard Specification for Nonferrous Bolts, Hex Cap Screws, Socket Head Cap Screws, and Studs for General Use

    F541-12 Standard Specification for Alloy Steel Eyebolts

    F547-06(2012) Standard Terminology of Nails for Use with Wood and Wood-Base Materials

    F592-84(2012) Standard Terminology of Collated and Cohered Fasteners and Their Application Tools

    F593-02(2008)e1 Standard Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs

    F594-09e1 Standard Specification for Stainless Steel Nuts

    F606-11a Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets

    F606M-12 Standard Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)

    F680-80(2007) Standard Test Methods for Nails

    F738M-02(2008) Standard Specification for Stainless Steel Metric Bolts, Screws, and Studs

    F788-12 Standard Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series

    F812-12 Standard Specification for Surface Discontinuities of Nuts, Inch and Metric Series

    F835M-11 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F835-12 Standard Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws

    F836M-02(2010) Standard Specification for Style 1 Stainless Steel Metric Nuts

    F837-08 Standard Specification for Stainless Steel Socket Head Cap Screws

    F837M-02a(2010) Standard Specification for Stainless Steel Socket Head Cap Screws [Metric]

    F844-07a Standard Specification for Washers, Steel, Plain (Flat), Unhardened for General Use

    F879M-02a(2008) Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)

    F879-12 Standard Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws

    F880M-02(2008) Standard Specification for Stainless Steel Socket Set Screws (Metric)

    F880-12 Standard Specification for Stainless Steel Socket, Square Head, and Slotted Headless-Set Screws

    F901-01(2012) Standard Specification for Aluminum Transmission Tower Bolts and Nuts

    F912-11 Standard Specification for Alloy Steel Socket Set Screws

    F912M-11 Standard Specification for Alloy Steel Socket Set Screws (Metric)

    F959M-07 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners [Metric]

    F959-09 Standard Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners

    F1077-05 Standard Guide for Selection of Committee F16 Fastener Specifications

    F1136/F1136M-11 Standard Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners

    F1137-11e1 Standard Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners

    F1428-92(2011) Standard Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners

    F1469-11 Standard Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing

    F1470-09 Standard Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection

    F1503-02(2012) Standard Practice for Machine/Process Capability Study Procedure

    F1554-07ae1 Standard Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength

    F1575-03(2008) Standard Test Method for Determining Bending Yield Moment of Nails

    F1667-11ae1 Standard Specification for Driven Fasteners: Nails, Spikes, and Staples

    F1789-12 Standard Terminology for F16 Mechanical Fasteners

    F1852-11 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength

    F1940-07a Standard Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners

    F1941M-07 Standard Specification for Electrodeposited Coatings on Threaded Fasteners [Metric]

    F1941-10 Standard Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))

    F2094/F2094M-11 Standard Specification for Silicon Nitride Bearing Balls

    F2161-10 Standard Guide for Instrument and Precision Bearing Lubricants-Part 1 Oils

    F2162-01(2008) Standard Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type

    F2163-01(2008) Standard Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring

    F2215-08 Standard Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications

    F2246-06e1 Standard Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage

    F2280-12 Standard Specification for “Twist Off” Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength

    F2281-04(2012) Standard Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications

    F2282-03(2009)e1 Standard Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners

    F2328M-07 Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs [Metric]

    F2328-05(2011) Standard Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs

    F2329-11 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners

    F2332-06 Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components

    F2403-09 Standard Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength

    F2430-04 Standard Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)

    F2431-04 Standard Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring

    F2437-12 Standard Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs

    F2443-04 Standard Specification for Roller, Bearing, Needle Ferrous, Solid, Spherical End

    F2444-04 Standard Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques

    F2482-08 Standard Specification for Load-Indicating Externally Threaded Fasteners

    F2488-05 Standard Terminology for Rolling Element Bearings

    F2489-06 Standard Guide for Instrument and Precision Bearing Lubricants-Part 2 Greases

    F2511-05e1 Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid

    F2590-06e1 Standard Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type

    F2591-06 Standard Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)

    F2660-12 Standard Test Method for Qualifying Coatings for Use on A490 Structural Bolts Relative to Hydrogen Embrittlement

    F2661-07 Standard Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer

    F2674-07 Standard Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners [Metric]

    F2688-08 Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers

    F2730/F2730M-11 Standard Specification for Silicon Nitride Cylindrical Bearing Rollers

    F2832-11 Standard Guide for Accelerated Corrosion Testing for Mechanical Fasteners

    F2833-11 Standard Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

    F2882-12 Standard Specification for Screws, Alloy Steel, Heat Treated, 170 ksi Minimum Tensile Strength

    F2882M-12 Standard Specification for Screws, Alloy Steel, Heat Treated, 1170 MPa Minimum Tensile Strength [Metric]

    F2953-12 Standard Specification for Phenolic Raw Materials for the Use in Bearing Cages

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2013
       Standards: 99
       Pages: 1036

    - 2012
       Standards: 95
       Pages: 1008