ASTM Volume 15.03, October 2012
Space Simulation; Aerospace and Aircraft; Composite Materials
Return to Previous Page
Table of Contents
C271/C271M-11 Standard Test Method for Density of Sandwich Core Materials
C272/C272M-12 Standard Test Method for Water Absorption of Core Materials for Sandwich Constructions
C273/C273M-11 Standard Test Method for Shear Properties of Sandwich Core Materials
C274-07 Standard Terminology of Structural Sandwich Constructions
C297/C297M-04(2010) Standard Test Method for Flatwise Tensile Strength of Sandwich Constructions
C363/C363M-09 Standard Test Method for Node Tensile Strength of Honeycomb Core Materials
C364/C364M-07 Standard Test Method for Edgewise Compressive Strength of Sandwich Constructions
C365/C365M-11a Standard Test Method for Flatwise Compressive Properties of Sandwich Cores
C366/C366M-11 Standard Test Methods for Measurement of Thickness of Sandwich Cores
C393/C393M-11e1 Standard Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
C394-00(2008) Standard Test Method for Shear Fatigue of Sandwich Core Materials
C480/C480M-08 Standard Test Method for Flexure Creep of Sandwich Constructions
C481-99(2011) Standard Test Method for Laboratory Aging of Sandwich Constructions
C613/C613M-97(2008) Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
D2344/D2344M-00(2006) Standard Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
D3039/D3039M-08 Standard Test Method for Tensile Properties of Polymer Matrix Composite Materials
D3171-11 Standard Test Methods for Constituent Content of Composite Materials
D3410/D3410M-03(2008) Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
D3479/D3479M-96(2007) Standard Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
D3518/D3518M-94(2007) Standard Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a ±45° Laminate
D3529M-10 Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
D3530/D3530M-97(2008) Standard Test Method for Volatiles Content of Composite Material Prepreg
D3531/D3531M-11 Standard Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
D3532/D3532M-12 Standard Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
D3552-96(2007) Standard Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
D3800M-11 Standard Test Method for Density of High-Modulus Fibers
D3878-07 Standard Terminology for Composite Materials
D4018-11 Standard Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
D4102-82(2008) Standard Test Method for Thermal Oxidative Resistance of Carbon Fibers
D4255/D4255M-01(2007) Standard Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
D4762-11a Standard Guide for Testing Polymer Matrix Composite Materials
D5229/D5229M-12 Standard Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
D5379/D5379M-05 Standard Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
D5448/D5448M-11 Standard Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5449/D5449M-11 Standard Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5450/D5450M-12 Standard Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5467/D5467M-97(2010) Standard Test Method for Compressive Properties of Unidirectional Polymer Matrix Composites Using a Sandwich Beam
D5528-01(2007)e3 Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D5687/D5687M-95(2007) Standard Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
D5766/D5766M-11 Standard Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
D5961/D5961M-10 Standard Test Method for Bearing Response of Polymer Matrix Composite Laminates
D6115-97(2011) Standard Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D6264/D6264M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
D6415/D6415M-06ae1 Standard Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
D6416/D6416M-01(2007) Standard Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
D6484/D6484M-09 Standard Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
D6507-11 Standard Practice for Fiber Reinforcement Orientation Codes for Composite Materials
D6641/D6641M-09 Standard Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
D6671/D6671M-06 Standard Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
D6742/D6742M-12 Standard Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
D6772-02(2007) Standard Test Method for Dimensional Stability of Sandwich Core Materials
D6790-02(2007) Standard Test Method for Determining Poisson's Ratio of Honeycomb Cores
D6856/D6856M-03(2008)e1 Standard Guide for Testing Fabric-Reinforced "Textile" Composite Materials
D6873/D6873M-08 Standard Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
D7028-07e1 Standard Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
D7078/D7078M-05 Standard Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
D7136/D7136M-12 Standard Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
D7137/D7137M-12 Standard Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
D7205/D7205M-06(2011) Standard Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
D7248/D7248M-12 Standard Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
D7249/D7249M-06 Standard Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
D7250/D7250M-06(2012) Standard Practice for Determining Sandwich Beam Flexural and Shear Stiffness
D7264/D7264M-07 Standard Test Method for Flexural Properties of Polymer Matrix Composite Materials
D7290-06(2011) Standard Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
D7291/D7291M-07 Standard Test Method for Through-Thickness "Flatwise" Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
D7332/D7332M-09 Standard Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
D7336/D7336M-12 Standard Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
D7337/D7337M-07 Standard Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
D7522/D7522M-09 Standard Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate
D7565/D7565M-10 Standard Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
D7615/D7615M-11 Standard Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
D7616/D7616M-11 Standard Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
D7617/D7617M-11 Standard Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
D7705/D7705M-12 Standard Test Method for Alkali Resistance of Fiber Reinforced Polymer (FRP) Matrix Composite Bars used in Concrete Construction
D7766/D7766M-11 Standard Practice for Damage Resistance Testing of Sandwich Constructions
E285-08 Standard Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
E295-82(2006) Standard Test Method for Measured Speed of Oil Diffusion Pumps
E296-70(2010) Standard Practice for Ionization Gage Application to Space Simulators
E307-72(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures
E341-08 Standard Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
E349-06 Standard Terminology Relating to Space Simulation
E377-08 Standard Practice for Internal Temperature Measurements in Low-Conductivity Materials
E408-71(2008) Standard Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E422-05(2011) Standard Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
E423-71(2008) Standard Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
E434-10 Standard Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
E457-08 Standard Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
E458-08 Standard Test Method for Heat of Ablation
E459-05(2011) Standard Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
E471-96(2011) Standard Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
E490-00a(2006) Standard Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
E491-73(2010) Standard Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
E511-07 Standard Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
E512-94(2010) Standard Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
E595-07 Standard Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
E598-08 Standard Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
E637-05(2011) Standard Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
E834-09 Standard Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
E1216-11 Standard Practice for Sampling for Particulate Contamination by Tape Lift
E1234-07 Standard Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
E1235-08 Standard Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
E1309-00(2011) Standard Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
E1434-00(2006) Standard Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
E1471-92(2008) Standard Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
E1548-09 Standard Practice for Preparation of Aerospace Contamination Control Plans
E1549-06 Standard Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
E1559-09 Standard Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
E1560-11e1 Standard Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E1731-11 Standard Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
E1997-12 Standard Practice for the Selection of Spacecraft Materials
E2042/E2042M-09 Standard Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
E2088-06(2011) Standard Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
E2089-00(2006) Standard Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
E2090-12 Standard Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
E2217-12 Standard Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
E2311-04(2009) Standard Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
E2312-11 Standard Practice for Tests of Cleanroom Materials
E2352-04(2010) Standard Practice for Aerospace Cleanrooms and Associated Controlled Environments-Cleanroom Operations
E2683-09 Standard Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
E2684-09 Standard Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
F21-65(2007) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
F22-02(2007) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
F24-09 Standard Method for Measuring and Counting Particulate Contamination on Surfaces
F25/F25M-09 Standard Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
F50-12 Standard Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
F51-00(2007) Standard Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
F91-06(2011) Standard Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
F302-09 Standard Practice for Field Sampling of Aerospace Fluids in Containers
F303-08 Standard Practices for Sampling for Particles in Aerospace Fluids and Components
F307-02(2007) Standard Practice for Sampling Pressurized Gas for Gas Analysis
F309-04(2010) Standard Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
F310-07 Standard Practice for Sampling Cryogenic Aerospace Fluids
F311-08 Standard Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
F312-08 Standard Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
F318-06 Standard Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
F319-09 Standard Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
F320-10 Standard Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
F326-96(2006) Standard Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
F327-08 Standard Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
F330-10 Standard Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
F331-05 Standard Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
F428-09 Standard Test Method for Intensity of Scratches on Aerospace Glass Enclosures
F482-09 Standard Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
F483-09 Standard Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
F484-08 Standard Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
F485-08 Standard Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
F502-08 Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
F519-12 Standard Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
F520-10 Standard Test Method for Environmental Resistance of Aerospace Transparencies
F521-83(2010) Standard Test Methods for Bond Integrity of Transparent Laminates
F548-09 Standard Test Method for Intensity of Scratches on Aerospace Transparent Plastics
F733-09 Standard Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
F734-95(2011) Standard Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
F735-11 Standard Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
F736-95(2011) Standard Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
F790-08 Standard Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
F791-96(2008) Standard Test Method for Stress Crazing of Transparent Plastics
F801-96(2008) Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts
F862-11 Standard Practice for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
F942-02(2008) Standard Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
F945-06 Standard Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
F1080-93(2008) Standard Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
F1104-02(2008) Standard Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
F1105-09 Standard Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
F1110-09 Standard Test Method for Sandwich Corrosion Test
F1111-08b Standard Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
F1113-87(2011) Standard Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
F1164-97(2009)e1 Standard Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
F1165-10 Standard Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
F1181-09 Standard Test Method for Measuring Binocular Disparity in Transparent Parts
F1252-10 Standard Test Method for Measuring Optical Reflectivity of Transparent Materials
F1316-90(2008) Standard Test Method for Measuring the Transmissivity of Transparent Parts
F1362-09 Standard Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
F1459-06(2012) Standard Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
F1624-09 Standard Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
F1645/F1645M-12 Standard Test Method for Water Migration in Honeycomb Core Materials
F1863-10 Standard Test Method for Measuring the Night Vision Goggle-Weighted Transmisivity of Transparent Parts
F1864-05(2010) Standard Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
F2078-08a Standard Terminology Relating to Hydrogen Embrittlement Testing
F2108-06(2011) Standard Practice for Inspection of Transparent Parts by Prism
F2109-01(2011) Standard Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
F2111-01a(2011) Standard Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
F2156-11 Standard Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
F2429-05(2010) Standard Terminology Relating to Aerospace Transparent Materials and Enclosures
F2469-10 Standard Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method