ASTM Volume 08.03, July 2012

    Plastics (III): D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products

    Table of Contents

    C581-03(2008)e1 Standard Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service

    C582-09 Standard Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment

    D1494-97(2008)e1 Standard Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels

    D2105-01(2007)e1 Standard Test Method for Longitudinal Tensile Properties of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube

    D2143-00(2010) Standard Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe

    D2310-06 Standard Classification for Machine-Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2517-06(2011) Standard Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings

    D2924-01(2006) Standard Test Method for External Pressure Resistance of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2925-01(2007)e1 Standard Test Method for Beam Deflection of "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow

    D2992-12 Standard Practice for Obtaining Hydrostatic or Pressure Design Basis for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings

    D2996-01(2007)e1 Standard Specification for Filament-Wound "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D2997-01(2007)e1 Standard Specification for Centrifugally Cast "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D3262-11 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe

    D3299-10 Standard Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D3517-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe

    D3567-97(2011) Standard Practice for Determining Dimensions of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings

    D3678-97(2008)e1 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions

    D3679-11 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding

    D3681-12 Standard Test Method for Chemical Resistance of “Fiberglass” (Glass–Fiber–Reinforced Thermosetting-Resin) Pipe in a Deflected Condition

    D3753-12 Standard Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells

    D3754-11 Standard Specification for “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe

    D3839-08 Standard Guide for Underground Installation of “Fiberglass” (Glass-FiberReinforced Thermosetting-Resin) Pipe

    D3840-10 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications

    D3841-97(2008)e1 Standard Specification for Glass-Fiber-Reinforced Polyester Plastic Panels

    D3982-08 Standard Specification for Contact Molded “Fiberglass” (Glass Fiber Reinforced Thermosetting Resin) Ducts

    D4024-05 Standard Specification for Machine Made "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D4068-09 Standard Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane

    D4097-01(2010) Standard Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks

    D4161-01(2010) Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals

    D4167-97(2007) Standard Specification for Fiber-Reinforced Plastic Fans and Blowers

    D4226-11 Standard Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products

    D4398-07 Standard Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure

    D4477-09 Standard Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit

    D4495-00(2005) Standard Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight

    D4551-96(2008)e1 Standard Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane

    D4726-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors

    D4756-06 Standard Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit

    D4803-10 Standard Test Method for Predicting Heat Buildup in PVC Building Products

    D5117-09 Standard Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock

    D5132-11 Standard Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles

    D5138-11 Standard Classification System and Basis for Specification for Liquid Crystal Polymers Molding and Extrusion Materials (LCP)

    D5155-10 Standard Test Methods for Polyurethane Raw Materials Determination of the Isocyanate Content of Aromatic Isocyanates

    D5203-07 Standard Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources

    D5204-11 Standard Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials

    D5205-10 Standard Classification System for Polyetherimide (PEI) Materials

    D5206-06a Standard Test Method for Windload Resistance of Rigid Plastic Siding

    D5207-09 Standard Practice for Confirmation of 20-mm (50-W) and 125-mm (500-W) Test Flames for Small-Scale Burning Tests on Plastic Materials

    D5208-09 Standard Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics

    D5210-92(2007) Standard Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge

    D5224-12 Standard Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds

    D5225-09 Standard Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer

    D5226-98(2010)e1 Standard Practice for Dissolving Polymer Materials

    D5227-01(2008)e1 Standard Test Method for Measurement of Hexane Extractable Content of Polyolefins

    D5260-04(2010) Standard Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds

    D5272-08 Standard Practice for Outdoor Exposure Testing of Photodegradable Plastics

    D5279-08 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Torsion

    D5296-11 Standard Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography

    D5319-97(2008)e1 Standard Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels

    D5336-09 Standard Specification for Polyphthalamide (PPA) Injection Molding Materials

    D5338-11 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures

    D5364-08e1 Standard Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units

    D5365-12 Standard Test Method for Long-Term Ring-Bending Strain of “Fiberglass” (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe

    D5418-07 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)

    D5419-09 Standard Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures

    D5420-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)

    D5421-05(2010) Standard Specification for Contact Molded "Fiberglass" (Glass-Fiber-Reinforced Thermosetting Resin) Flanges

    D5422-09 Standard Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer

    D5436-03(2008) Standard Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes

    D5477-11 Standard Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)

    D5491-08 Standard Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials

    D5492-10 Standard Test Method for Determination of Xylene Solubles in Propylene Plastics

    D5507-99(2008)e1 Standard Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography

    D5508-94a(2009)e1 Standard Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)

    D5511-11 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions

    D5523-10 Standard Test Method for Polyurethane Raw Materials Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates

    D5526-94(2011)e1 Standard Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions

    D5575-07 Standard Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers

    D5576-00(2006) Standard Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)

    D5577-94(2010)e1 Standard Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics

    D5592-94(2010) Standard Guide for Material Properties Needed in Engineering Design Using Plastics

    D5594-98(2004) Standard Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)

    D5628-10 Standard Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)

    D5629-11 Standard Test Method for Polyurethane Raw Materials Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers

    D5630-06 Standard Test Method for Ash Content in Plastics

    D5672-09 Standard Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique

    D5675-04(2010) Standard Specification for Fluoropolymer Micropowders

    D5677-05(2010) Standard Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines

    D5685-11 Standard Specification for "Fiberglass" (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings

    D5740-11 Standard Guide for Writing Material Standards in the Classification D4000 Format

    D5813-04(2008) Standard Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems

    D5814-10 Standard Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test

    D5857-10 Standard Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology

    D5870-11 Standard Practice for Calculating Property Retention Index of Plastics

    D5926-11 Standard Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems

    D5927-09 Standard Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods

    D5930-09 Standard Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique

    D5946-09 Standard Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements

    D5947-11 Standard Test Methods for Physical Dimensions of Solid Plastics Specimens

    D5948-05e1 Standard Specification for Molding Compounds, Thermosetting

    D5988-03 Standard Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting

    D5989-11 Standard Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)

    D5991-09 Standard Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake

    D5998-10 Standard Specification for Molded Polyethylene Shipping and Storage Drums

    D6040-06 Standard Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6041-11 Standard Specification for Contact-Molded “Fiberglass” (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings

    D6042-09 Standard Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)

    D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials

    D6098-10 Standard Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)

    D6099-08 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates

    D6100-11 Standard Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)

    D6108-09 Standard Test Method for Compressive Properties of Plastic Lumber and Shapes

    D6109-10 Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products

    D6110-10 Standard Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics

    D6111-09 Standard Test Method for Bulk Density and Specific Gravity of Plastic Lumber and Shapes by Displacement

    D6112-10 Standard Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes

    D6117-10 Standard Test Methods for Mechanical Fasteners In Plastic Lumber and Shapes

    D6150-09 Standard Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility

    D6226-10 Standard Test Method for Open Cell Content of Rigid Cellular Plastics

    D6247-10 Standard Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry

    D6248-98(2004) Standard Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry

    D6261-10 Standard Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)

    D6262-12 Standard Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)

    D6263-11 Standard Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)

    D6265-09 Standard Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test

    D6272-10 Standard Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending

    D6287-09 Standard Practice for Cutting Film and Sheeting Test Specimens

    D6288-09 Standard Practice for Separation and Washing of Recycled Plastics Prior to Testing

    D6289-08 Standard Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics

    D6290-05e1 Standard Test Method for Color Determination of Plastic Pellets

    D6338-10 Standard Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods

    D6339-11 Standard Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)

    D6340-98(2007) Standard Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment

    D6341-10 Standard Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between -30 and 140°F (-34.4 and 60°C)

    D6342-08 Standard Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy

    D6358-11 Standard Classification System and Basis for Specification for Poly (Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ISO Methods

    D6360-07 Standard Practice for Enclosed Carbon-Arc Exposures of Plastics

    D6394-11 Standard Specification for Sulfone Plastics (SP)

    D6395-11 Standard Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics

    D6400-12 Standard Specification for Labeling of Plastics Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6436-08 Standard Guide for Reporting Properties for Plastics and Thermoplastic Elastomers

    D6437-05(2010)e1 Standard Test Method for Polyurethane Raw Materials: alkalinity in Low-Alkalinity Polyols (Determination of CPR values of Polyols)

    D6456-10 Standard Specification for Finished Parts Made from Polyimide Resin

    D6457-08 Standard Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)

    D6474-99(2006) Standard Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography

    D6576-07 Standard Specification for Flexible Cellular Rubber Chemically Blown

    D6585-11 Standard Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D6645-01(2010) Standard Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry

    D6662-09 Standard Specification for Polyolefin-Based Plastic Lumber Decking Boards

    D6691-09 Standard Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum

    D6712-01(2009) Standard Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes

    D6713-01(2009) Standard Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)

    D6777-02(2010)e1 Standard Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding

    D6778-06 Standard Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials

    D6779-12 Standard Classification System for and Basis of Specification for Polyamide Molding and Extrusion Materials (PA)

    D6783-05(2011) Standard Specification for Polymer Concrete Pipe

    D6835-08 Standard Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)

    D6864-11 Standard Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products

    D6865-11 Standard Classification System and Basis for Specifications for Acrylonitrile–Styrene–Acrylate (ASA) and Acrylonitrile–EPDM

    D6866-12 Standard Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis

    D6867-03(2009) Standard Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing

    D6868-11 Standard Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities

    D6869-03(2011) Standard Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)

    D6953-11 Standard Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)

    D6954-04 Standard Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation

    D6979-08 Standard Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen

    D6980-12 Standard Test Method for Determination of Moisture in Plastics by Loss in Weight

    D6988-08 Standard Guide for Determination of Thickness of Plastic Film Test Specimens

    D7026-04 Standard Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis

    D7027-05e1 Standard Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine

    D7029-09 Standard Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0F [82.2°C]

    D7075-04 Standard Practice for Evaluating and Reporting Environmental Performance of Biobased Products

    D7081-05 Standard Specification for Non-Floating Biodegradable Plastics in the Marine Environment

    D7082-04(2010) Standard Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe

    D7083-04(2010)e1 Standard Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography

    D7107-04(2010) Standard Test Method for Creep Measurement of Self-Lubricating Bushings

    D7132-05 Standard Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam

    D7133-11 Standard Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids

    D7134-05 Standard Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)

    D7191-10 Standard Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor

    D7192-10 Standard Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors

    D7193-11 Standard Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape

    D7194-05 Standard Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene

    D7209-06 Standard Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products

    D7210-06 Standard Practice for Extraction of Additives in Polyolefin Plastics

    D7211-06 Standard Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use

    D7251-11 Standard Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products

    D7252-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates

    D7253-06(2011)e1 Standard Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols

    D7254-07 Standard Specification for Polypropylene (PP) Siding

    D7258-09 Standard Specification for Polymeric Piles

    D7292-06 Standard Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)

    D7293-06 Standard Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)

    D7309-11 Standard Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry

    D7310-11 Standard Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors

    D7399-08 Standard Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)

    D7436-11 Standard Classification System for Unfilled Polyethylene Plastics Molding and Extrusion Materials with a Fractional Melt Index Using ISO Protocol and Methodology

    D7444-11 Standard Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics

    D7445-09 Standard Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

    D7471-09 Standard Specification for CPT-Fluoropolymer Molding and Extrusion Materials

    D7472-09 Standard Specification for EFEP-Fluoropolymer Molding and Extrusion Materials

    D7474-12 Standard Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents

    D7475-11 Standard Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions

    D7486-08 Standard Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis

    D7487-08 Standard Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test

    D7567-09 Standard Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction

    D7611/D7611M-10 Standard Practice for Coding Plastic Manufactured Articles for Resin Identification

    D7711-11e1 Standard Guide for Description of Polymer Pellet Defects

    D7745-11 Standard Practice for Testing Pultruded Composites

    D7774-11 Standard Test Method for Flexural Fatigue Properties of Plastics

    D7791-12 Standard Test Method for Uniaxial Fatigue Properties of Plastics

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2012
       Standards: 200
       Pages: 1396

    - 2011
       Standards: 212
       Pages: 1452