ASTM Volume 04.09, April 2012

    Soil and Rock (II): D5877 - latest

    Table of Contents

    D5877-95(2005) Standard Guide for Displaying Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Diagrams Based on Data Analytical Calculations

    D5878-08 Standard Guides for Using Rock-Mass Classification Systems for Engineering Purposes

    D5879-95(2010) Standard Practice for Surface Site Characterization for On-Site Septic Systems

    D5880-95(2006) Standard Guide for Subsurface Flow and Transport Modeling

    D5881-95(2005) Standard Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)

    D5882-07 Standard Test Method for Low Strain Impact Integrity Testing of Deep Foundations

    D5883-96(2008) Standard Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes

    D5903-96(2006) Standard Guide for Planning and Preparing for a Groundwater Sampling Event

    D5911/D5911M-96(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site

    D5912-96(2004) Standard Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)

    D5918-06 Standard Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils

    D5920-96(2005) Standard Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method

    D5921-96(2010) Standard Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems

    D5922-96(2010) Standard Guide for Analysis of Spatial Variation in Geostatistical Site Investigations

    D5923-96(2010) Standard Guide for Selection of Kriging Methods in Geostatistical Site Investigations

    D5924-96(2010) Standard Guide for Selection of Simulation Approaches in Geostatistical Site Investigations

    D5971-07 Standard Practice for Sampling Freshly Mixed Controlled Low-Strength Material

    D5978-96(2005) Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells

    D5979-96(2008) Standard Guide for Conceptualization and Characterization of Groundwater Systems

    D5980-96(2010)e1 Standard Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring

    D5981-96(2008) Standard Guide for Calibrating a Groundwater Flow Model Application

    D5982-07 Standard Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)

    D5995-98(2010) Standard Guide for Environmental Site Characterization in Cold Regions

    D6000-96(2008) Standard Guide for Presentation of Water-Level Information from Groundwater Sites

    D6001-05 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization

    D6023-07 Standard Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)

    D6024-07 Standard Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application

    D6025-96(2008) Standard Guide for Developing and Evaluating Groundwater Modeling Codes

    D6026-06 Standard Practice for Using Significant Digits in Geotechnical Data

    D6027-96(2004) Standard Test Method for Calibrating Linear Displacement Transducers for Geotechnical Purposes

    D6028-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method

    D6029-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method

    D6030-96(2008) Standard Guide for Selection of Methods for Assessing Groundwater or Aquifer Sensitivity and Vulnerability

    D6031/D6031M-96(2010)e1 Standard Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes

    D6032-08 Standard Test Method for Determining Rock Quality Designation (RQD) of Rock Core

    D6033-96(2008) Standard Guide for Describing the Functionality of a Groundwater Modeling Code

    D6034-96(2010)e1 Standard Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test

    D6035-08 Standard Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter

    D6036-96(2008) Standard Guide for Displaying the Results of Chemical Analyses of Groundwater for Major Ions and Trace Elements - Use of Maps

    D6066-11 Standard Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential

    D6067-10 Standard Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization

    D6089-97(2010) Standard Guide for Documenting a Groundwater Sampling Event

    D6092-97(2008) Standard Practice for Specifying Standard Sizes of Stone for Erosion Control

    D6103-04 Standard Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)

    D6106-97(2010) Standard Guide for Establishing Nomenclature of Groundwater Aquifers

    D6128-06 Standard Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell

    D6151-08 Standard Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling

    D6167-11 Standard Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper

    D6168-97(2010) Standard Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids

    D6169-98(2005) Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations

    D6170-97(2010) Standard Guide for Selecting a Groundwater Modeling Code

    D6171-97(2010) Standard Guide for Documenting a Groundwater Modeling Code

    D6187-97(2010) Standard Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence

    D6230-98(2005) Standard Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers

    D6235-04(2010) Standard Practice for Expedited Site Characterization of Vadose Zone and Groundwater Contamination at Hazardous Waste Contaminated Sites

    D6236-11 Standard Guide for Coring and Logging Cement - or Lime-Stabilized Soil

    D6274-10 Standard Guide for Conducting Borehole Geophysical Logging - Gamma

    D6276-99a(2006)e1 Standard Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization

    D6282-98(2005) Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations

    D6285-99(2005) Standard Guide for Locating Abandoned Wells

    D6286-98(2006) Standard Guide for Selection of Drilling Methods for Environmental Site Characterization

    D6312-98(2005) Standard Guide for Developing Appropriate Statistical Approaches for Groundwater Detection Monitoring Programs

    D6391-11 Standard Test Method for Field Measurement of Hydraulic Conductivity Using Borehole Infiltration

    D6393-08 Standard Test Method for Bulk Solids Characterization by Carr Indices

    D6429-99(2011)e1 Standard Guide for Selecting Surface Geophysical Methods

    D6430-99(2010) Standard Guide for Using the Gravity Method for Subsurface Investigation

    D6431-99(2010) Standard Guide for Using the Direct Current Resistivity Method for Subsurface Investigation

    D6432-11 Standard Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation

    D6449-99(2008) Standard Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)

    D6452-99(2005) Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations

    D6459-11 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion

    D6460-07 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D6461-99(2007)e2 Standard Specification for Silt Fence Materials

    D6462-03(2008) Standard Practice for Silt Fence Installation

    D6467-06a Standard Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils

    D6473-10 Standard Test Method for Specific Gravity and Absorption of Rock For Erosion Control

    D6475-06 Standard Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets

    D6517-00(2005) Standard Guide for Field Preservation of Groundwater Samples

    D6519-08 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler

    D6527-00(2008) Standard Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation

    D6528-07 Standard Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils

    D6539-00(2006)e2 Standard Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air

    D6564-00(2005) Standard Guide for Field Filtration of Groundwater Samples

    D6565-00(2005) Standard Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method

    D6572-06 Standard Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test

    D6598-11 Standard Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations

    D6599-00(2008) Standard Practice for Construction of Live Fascines on Slopes

    D6629-01(2007) Standard Guide for Selection of Methods for Estimating Soil Loss by Erosion

    D6634-01(2006) Standard Guide for the Selection of Purging and Sampling Devices for Groundwater Monitoring Wells

    D6635-01(2007) Standard Test Method for Performing the Flat Plate Dilatometer

    D6639-01(2008) Standard Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations

    D6642-01(2006) Standard Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux

    D6682-08 Standard Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester

    D6683-08 Standard Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress

    D6684-04(2010) Standard Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems

    D6685-01(2008) Standard Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)

    D6711-01(2008) Standard Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses

    D6724-04(2010) Standard Guide for Installation of Direct Push Groundwater Monitoring Wells

    D6725-04(2010) Standard Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers

    D6726-01(2007) Standard Guide for Conducting Borehole Geophysical Logging - Electromagnetic Induction

    D6727-01(2007) Standard Guide for Conducting Borehole Geophysical Logging - Neutron

    D6758-08 Standard Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method

    D6760-08 Standard Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing

    D6765-02(2008) Standard Practice for Live Staking

    D6773-08 Standard Shear Test Method for Bulk Solids Using the Schulze Ring Shear Tester

    D6780-05 Standard Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)

    D6820-02(2007) Standard Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation

    D6825-02(2008)e1 Standard Guide for Placement of Riprap Revetments

    D6836-02(2008)e2 Standard Test Methods for Determination of the Soil Water Chararcteristic Curve for Desorption Using a Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, and/or Centrifuge

    D6884-03(2010) Standard Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems

    D6910/D6910M-09 Standard Test Method for Marsh Funnel Viscosity of Clay Construction Slurries

    D6911-03(2010) Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis

    D6913-04(2009) Standard Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis

    D6914-04(2010) Standard Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices

    D6938-10 Standard Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)

    D6939-03 Standard Practice for Brushmattressing

    D6940-10 Standard Practice for Measuring Sifting Segregation Tendencies of Bulk Solids

    D6941-05e1 Standard Practice for Measuring Fluidization Segregation Tendencies of Powders

    D7012-10 Standard Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures

    D7013/D7013M-11 Standard Guide for Calibration Facility Setup for Nuclear Surface Gauges

    D7014-10 Standard Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses

    D7015-07 Standard Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils

    D7045-04(2010) Standard Guide for Optimization of Groundwater Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities

    D7046-11 Standard Guide for Use of the Metal Detection Method for Subsurface Exploration

    D7047-04 Standard Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifier

    D7048-04(2010) Standard Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs

    D7069-04(2010) Standard Guide for Field Quality Assurance in a Groundwater Sampling Event

    D7070-08 Standard Test Methods for Creep of Rock Core Under Constant Stress and Temperature

    D7099-04(2010) Standard Terminology Relating to Frozen Soil and Rock

    D7100-11 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions

    D7101-08 Standard Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions

    D7128-05(2010) Standard Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation

    D7181-11 Method for Consolidated Drained Triaxial Compression Test for Soils

    D7207-05 Standard Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions

    D7208-06 Standard Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion

    D7242-06 Standard Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Groundwater Samplers

    D7243-11 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges

    D7262-10 Standard Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids

    D7263-09 Standard Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens

    D7276-08 Standard Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow

    D7277-08 Standard Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow

    D7299-06 Standard Practice for Verifying Performance of a Vertical Inclinometer Probe

    D7300-11 Standard Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain

    D7322-07 Standard Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions

    D7351-07 Standard Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications

    D7352-07 Standard Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)

    D7367-07 Standard Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting

    D7380-08 Standard Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer

    D7382-08 Standard Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer

    D7383-10 Standard Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations

    D7384-10 Standard Practice for Minimum Geospatial Data for a Surface Coal Mining Permit Boundary

    D7400-08 Standard Test Methods for Downhole Seismic Testing

    D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests

    D7443-10 Standard Practice for Minimum Geospatial Data for Underground Coal Mining Extents

    D7458-08 Standard Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection

    D7481-09 Standard Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder

    D7503-10 Standard Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils

    D7533/D7533M-09 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area

    D7534/D7534M-09 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit

    D7608-10 Standard Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces

    D7609/D7609M-10 Standard Practice for Minimum Geospatial Data for an Abandoned Mine Land Project Site

    D7610/D7610M-10 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Keyword Feature

    D7625-10 Standard Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method

    D7626-10 Standard Test Methods for Determining the Organic Treat Loading of Organophilic Clay

    D7627-10 Standard Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine

    D7628-10 Standard Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas

    D7629/D7629M-10 Standard Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features

    D7630/D7630M-10 Standard Practice for Minimum Geospatial Data for Postmining Land Uses

    D7631-10 Standard Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location

    D7663-11 Standard Practice for Active Soil Gas Sampling in the Vadose Zone for Vapor Intrusion Evaluations

    D7664-10 Standard Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils

    D7698-11a Standard Test Method for In-Place Estimation of Density and Water Content of Soil and Aggregate by Correlation with Complex Impedance Method

    D7699/D7699M-11 Standard Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Areas, Planning Units, Keyword Features, and Project Sites

    D7758-11 Standard Practice for Passive Soil Gas Sampling in the Vadose Zone for Source Identification, Spatial Variability Assessment, Monitoring, and Vapor Intrusion Evaluations

    D7762-11 Standard Practice for Design of Stabilization of Soil and Soil-Like Materials with Self-Cementing Fly Ash

    D7780-12 Standard Practice for Geospatial Data for Representing Coal Mining Features

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2012
       Standards: 180
       Pages: 1740

    - 2011
       Standards: 167
       Pages: 1588