ASTM Volume 04.07, November 2012

    Building Seals and Sealants; Fire Standards; Dimension Stone

    Table of Contents

    C97/C97M-09 Standard Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone

    C99/C99M-09 Standard Test Method for Modulus of Rupture of Dimension Stone

    C119-11 Standard Terminology Relating to Dimension Stone

    C120/C120M-09 Standard Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)

    C121/C121M-09e1 Standard Test Method for Water Absorption of Slate

    C170/C170M-09 Standard Test Method for Compressive Strength of Dimension Stone

    C217/C217M-09 Standard Test Method for Weather Resistance of Slate

    C241/C241M-09 Standard Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic

    C406/C406M-10 Standard Specification for Roofing Slate

    C503/C503M-10 Standard Specification for Marble Dimension Stone

    C509-06(2011) Standard Specification for Elastomeric Cellular Preformed Gasket and Sealing Material

    C510-05a(2011) Standard Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants

    C542-05(2011) Standard Specification for Lock-Strip Gaskets

    C568/C568M-10 Standard Specification for Limestone Dimension Stone

    C603-04(2008) Standard Test Method for Extrusion Rate and Application Life of Elastomeric Sealants

    C615/C615M-11 Standard Specification for Granite Dimension Stone

    C616/C616M-10 Standard Specification for Quartz-Based Dimension Stone

    C629/C629M-10 Standard Specification for Slate Dimension Stone

    C639-01(2011) Standard Test Method for Rheological (Flow) Properties of Elastomeric Sealants

    C661-06(2011) Standard Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer

    C679-03(2009)e1 Standard Test Method for Tack-Free Time of Elastomeric Sealants

    C681-03(2009) Standard Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds

    C711-03(2009) Standard Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants

    C712-03(2009) Standard Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants

    C716-06(2011) Standard Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials

    C717-12a Standard Terminology of Building Seals and Sealants

    C719-93(2010) Standard Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)

    C731-00(2010) Standard Test Method for Extrudability, After Package Aging, of Latex Sealants

    C732-06(2012) Standard Test Method for Aging Effects of Artificial Weathering on Latex Sealants

    C734-06(2012) Standard Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering

    C736-12 Standard Test Method for Extension-Recovery and Adhesion of Latex Sealants

    C765-97(2011) Standard Test Method for Low-Temperature Flexibility of Preformed Tape Sealants

    C771-03(2009) Standard Test Method for Weight Loss After Heat Aging of Preformed Sealing Tapes

    C772-03(2009) Standard Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants

    C782-03(2009) Standard Test Method for Softness of Preformed Tape Sealants

    C792-04(2008) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants

    C793-05(2010) Standard Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants

    C794-10 Standard Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants

    C834-10 Standard Specification for Latex Sealants

    C864-05(2011) Standard Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers

    C879-03(2009) Standard Test Methods for Release Papers Used With Preformed Tape Sealants

    C880/C880M-09 Standard Test Method for Flexural Strength of Dimension Stone

    C907-03(2008) Standard Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method

    C908-00(2011) Standard Test Method for Yield Strength of Preformed Tape Sealants

    C910-06(2011) Standard Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants

    C919-12 Standard Practice for Use of Sealants in Acoustical Applications

    C920-11 Standard Specification for Elastomeric Joint Sealants

    C961-06(2011) Standard Test Method for Lap Shear Strength of Sealants

    C963-00(2007) Standard Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets

    C964-07 Standard Guide for Lock-Strip Gasket Glazing

    C972-00(2011) Standard Test Method for Compression-Recovery of Tape Sealant

    C1016-02(2008)e1 Standard Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material

    C1021-08 Standard Practice for Laboratories Engaged in Testing of Building Sealants

    C1083-06(2011) Standard Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials

    C1087-00(2011) Standard Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems

    C1115-06(2011) Standard Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories

    C1135-00(2011) Standard Test Method for Determining Tensile Adhesion Properties of Structural Sealants

    C1166-06(2011) Standard Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories

    C1183-04(2008) Standard Test Method for Extrusion Rate of Elastomeric Sealants

    C1184-05 Standard Specification for Structural Silicone Sealants

    C1193-11a Standard Guide for Use of Joint Sealants

    C1201/C1201M-09 Standard Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference

    C1216-03(2008) Standard Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants

    C1241-00(2009) Standard Test Method for Volume Shrinkage of Latex Sealants During Cure

    C1242-12a Standard Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems

    C1246-00(2012) Standard Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure

    C1247-09 Standard Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids

    C1248-08 Standard Test Method for Staining of Porous Substrate by Joint Sealants

    C1249-06a(2010) Standard Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications

    C1253-93(2009) Standard Test Method for Determining the Outgassing Potential of Sealant Backing

    C1257-06a Standard Test Method for Accelerated Weathering of Solvent-Release-Type Sealants

    C1265-94(2011) Standard Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications

    C1266-02(2011) Standard Test Method for Flow Characteristics of Preformed Tape Sealants

    C1281-03(2009) Standard Specification for Preformed Tape Sealants for Glazing Applications

    C1294-07(2011) Standard Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials

    C1311-10 Standard Specification for Solvent Release Sealants

    C1330-02(2007) Standard Specification for Cylindrical Sealant Backing for Use with Cold Liquid Applied Sealants

    C1352/C1352M-09 Standard Test Method for Flexural Modulus of Elasticity of Dimension Stone

    C1353-09 Standard Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser

    C1354/C1354M-09 Standard Test Method for Strength of Individual Stone Anchorages in Dimension Stone

    C1367-06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures

    C1369-07 Standard Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units

    C1375-00(2009) Standard Guide for Substrates Used in Testing Building Seals and Sealants

    C1382-11 Standard Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints

    C1392-00(2009) Standard Guide for Evaluating Failure of Structural Sealant Glazing

    C1394-03(2008) Standard Guide for In-Situ Structural Silicone Glazing Evaluation

    C1401-09a Standard Guide for Structural Sealant Glazing

    C1442-11 Standard Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus

    C1472-10 Standard Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width

    C1481-12 Standard Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)

    C1487-02(2012) Standard Guide for Remedying Structural Silicone Glazing

    C1496-11 Standard Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades

    C1501-09 Standard Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures

    C1515-11 Standard Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing

    C1518-04(2009) Standard Specification for Precured Elastomeric Silicone Joint Sealants

    C1519-10 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures

    C1520-02(2010) Standard Guide for Paintability of Latex Sealants

    C1521-09e1 Standard Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints

    C1523-10 Standard Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants

    C1526-08 Standard Specification for Serpentine Dimension Stone

    C1527/C1527M-11 Standard Specification for Travertine Dimension Stone

    C1528-12a Standard Guide for Selection of Dimension Stone

    C1536-10 Standard Test Method for Measuring the Yield for Aerosol Foam Sealants

    C1564-04(2009) Standard Guide for Use of Silicone Sealants for Protective Glazing Systems

    C1589-05 Standard Practice for Outdoor Weathering of Construction Seals and Sealants

    C1620-12 Standard Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants

    C1635-06 Standard Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension

    C1642-07 Standard Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials

    C1643-08 Standard Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants

    C1681-09 Standard Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain

    C1721-09 Standard Guide for Petrographic Examination of Dimension Stone

    C1722-11 Standard Guide for Repair and Restoration of Dimension Stone

    C1735-11 Standard Test Method for Measuring the Time Dependent Modulus of Sealants Using Stress Relaxation

    C1736-11 Standard Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device

    C1737-10 Standard Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing

    C1756-11 Standard Guide for Comparing Sealant Behavior to Reference Photographs

    D2202-00(2010) Standard Test Method for Slump of Sealants

    D2203-01(2011) Standard Test Method for Staining from Sealants

    D2377-00(2008) Standard Test Method for Tack-Free Time of Caulking Compounds and Sealants

    D2452-03(2009) Standard Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds

    D2453-03(2009) Standard Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds

    D2859-06(2011) Standard Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials

    D7744/D7744M-11 Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes

    E84-12b Standard Test Method for Surface Burning Characteristics of Building Materials

    E108-11 Standard Test Methods for Fire Tests of Roof Coverings

    E119-12 Standard Test Methods for Fire Tests of Building Construction and Materials

    E136-11 Standard Test Method for Behavior of Materials in a Vertical Tube Furnace at 750°C

    E162-12a Standard Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source

    E176-10ae1 Standard Terminology of Fire Standards

    E535-12 Standard Practice for Preparation of Fire-Test-Response Standards

    E603-12a Standard Guide for Room Fire Experiments

    E648-10e1 Standard Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source

    E662-12 Standard Test Method for Specific Optical Density of Smoke Generated by Solid Materials

    E800-07 Standard Guide for Measurement of Gases Present or Generated During Fires

    E814-11a Standard Test Method for Fire Tests of Penetration Firestop Systems

    E906/E906M-10 Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method

    E970-10 Standard Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source

    E1317-12 Standard Test Method for Flammability of Marine Surface Finishes

    E1321-09 Standard Test Method for Determining Material Ignition and Flame Spread Properties

    E1352-08a Standard Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies

    E1353-08ae1 Standard Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture

    E1354-11b Standard Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter

    E1355-12 Standard Guide for Evaluating the Predictive Capability of Deterministic Fire Models

    E1474-10 Standard Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter

    E1529-10 Standard Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies

    E1537-12 Standard Test Method for Fire Testing of Upholstered Furniture

    E1546-09a Standard Guide for Development of Fire-Hazard-Assessment Standards

    E1590-12 Standard Test Method for Fire Testing of Mattresses

    E1591-07 Standard Guide for Obtaining Data for Deterministic Fire Models

    E1623-11 Standard Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)

    E1678-10 Standard Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis

    E1725-08 Standard Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components

    E1740-10 Standard Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter

    E1776-07 Standard Guide for Development of Fire-Risk-Assessment Standards

    E1822-09 Standard Test Method for Fire Testing of Stacked Chairs

    E1966-07(2011) Standard Test Method for Fire-Resistive Joint Systems

    E1995-12 Standard Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally

    E2032-09 Standard Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119

    E2058-09 Standard Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)

    E2061-09a Standard Guide for Fire Hazard Assessment of Rail Transportation Vehicles

    E2067-08 Standard Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests

    E2102-11a Standard Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater

    E2187-09 Standard Test Method for Measuring the Ignition Strength of Cigarettes

    E2203-02(2008) Standard Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories

    E2226-12 Standard Practice for Application of Hose Stream

    E2230-08 Standard Practice for Thermal Qualification of Type B Packages for Radioactive Material

    E2231-09 Standard Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics

    E2257-08 Standard Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies

    E2280-09 Standard Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities

    E2307-10 Standard Test Method for Determining Fire Resistance of Perimeter Fire Barrier Systems Using Intermediate-Scale, Multi-story Test Apparatus

    E2335-08 Standard Guide for Laboratory Monitors

    E2336-04(2009) Standard Test Methods for Fire Resistive Grease Duct Enclosure Systems

    E2404-12 Standard Practice for Specimen Preparation and Mounting of Wall or Ceiling Coverings to Assess Surface Burning Characteristics

    E2536-09 Standard Guide for Assessment of Measurement Uncertainty in Fire Tests

    E2573-12 Standard Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics

    E2574/E2574M-12a Standard Test Method for Fire Testing of School Bus Seat Assemblies

    E2579-11 Standard Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics

    E2599-11 Standard Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics

    E2652-12 Standard Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750°C

    E2653-09 Standard Practice for Conducting an Interlaboratory Study to Determine the Precision of a Fire Test Method with Fewer Than Six Participating Laboratories

    E2688-10 Standard Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics

    E2690-10e2 Standard Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics

    E2707-09 Standard Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure

    E2726/E2726M-12a Standard Test Method for Evaluating the Fire-Test-Response of Deck Structures to Burning Brands

    E2748-12 Standard Guide for Fire-Resistance Experiments

    E2749-10 Standard Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens

    E2750-11 Standard Guide for Extension of Data For Penetrations Seals

    E2768-11 Standard Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)

    E2816-11 Standard Test Methods for Fire Resistive Metallic HVAC Duct Systems

    E2837-11 Standard Test Method for Determining the Fire Resistance of Continuity Head-of-Wall Joint Systems Installed Between Rated Wall Assemblies and Nonrated Horizontal Assemblies

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2012
       Standards: 193
       Pages: 1612

    - 2011
       Standards: 180
       Pages: 1570