ASTM Volume 04.03, June 2012

    Road and Paving Materials; Vehicle-Pavement Systems

    Table of Contents

    D5-06e1 Standard Test Method for Penetration of Bituminous Materials

    D8-11 Standard Terminology Relating to Materials for Roads and Pavements

    D20-03(2009) Standard Test Method for Distillation of Road Tars

    D70-09e1 Standard Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)

    D75/D75M-09 Standard Practice for Sampling Aggregates

    D98-05 Standard Specification for Calcium Chloride

    D113-07 Standard Test Method for Ductility of Bituminous Materials

    D139-07 Standard Test Method for Float Test for Bituminous Materials

    D140/D140M-09 Standard Practice for Sampling Bituminous Materials

    D242/D242M-09 Standard Specification for Mineral Filler For Bituminous Paving Mixtures

    D243-08 Standard Test Method for Residue of Specified Penetration

    D244-09 Standard Test Methods and Practices for Emulsified Asphalts

    D345-02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications

    D402-08 Standard Test Method for Distillation of Cutback Asphaltic (Bituminous) Products

    D448-08 Standard Classification for Sizes of Aggregate for Road and Bridge Construction

    D490-92(2011) Standard Specification for Road Tar

    D517-98(2008) Standard Specification for Asphalt Plank

    D545-08 Standard Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)

    D546-10 Standard Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures

    D633-11 Standard Volume Correction Table for Road Tar

    D692/D692M-09 Standard Specification for Coarse Aggregate for Bituminous Paving Mixtures

    D946/D946M-09a Standard Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction

    D977-12 Standard Specification for Emulsified Asphalt

    D979/D979M-12 Standard Practice for Sampling Bituminous Paving Mixtures

    D994/D994M-11 Standard Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)

    D1073-11 Standard Specification for Fine Aggregate for Bituminous Paving Mixtures

    D1074-09 Standard Test Method for Compressive Strength of Bituminous Mixtures

    D1075-11 Standard Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures

    D1139/D1139M-09 Standard Specification for Aggregate for Single or Multiple Bituminous Surface Treatments

    D1188-07e1 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples

    D1195/D1195M-09 Standard Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1196/D1196M-12 Standard Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements

    D1369-84(2006) Standard Practice for Quantities of Materials for Bituminous Surface Treatments

    D1461-11 Standard Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures

    D1560-09a Standard Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus

    D1561-92(2005)e1 Standard Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor

    D1665-98(2009) Standard Test Method for Engler Specific Viscosity of Tar Products

    D1751-04(2008) Standard Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)

    D1752-04a(2008) Standard Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction

    D1754/D1754M-09 Standard Test Method for Effect of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)

    D1856-09 Standard Test Method for Recovery of Asphalt From Solution by Abson Method

    D1985-03(2008) Standard Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks

    D2026/D2026M-97(2010)e1 Standard Specification for Cutback Asphalt (Slow-Curing Type)

    D2027/D2027M-10 Standard Specification for Cutback Asphalt (Medium-Curing Type)

    D2028/D2028M-10 Standard Specification for Cutback Asphalt (Rapid-Curing Type)

    D2041/D2041M-11 Standard Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures

    D2042-09 Standard Test Method for Solubility of Asphalt Materials in Trichloroethylene

    D2170/D2170M-10 Standard Test Method for Kinematic Viscosity of Asphalts (Bitumens)

    D2171/D2171M-10 Standard Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer

    D2172/D2172M-11 Standard Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures

    D2397-05 Standard Specification for Cationic Emulsified Asphalt

    D2399-83(2005) Standard Practice for Selection of Cutback Asphalts

    D2419-09 Standard Test Method for Sand Equivalent Value of Soils and Fine Aggregate

    D2489/D2489M-08 Standard Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures

    D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts

    D2628-91(2011) Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements

    D2726-11 Standard Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures

    D2728-98(2009) Standard Practice for Paving Uses and Application Temperatures for Road Tars

    D2835-89(2007) Standard Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements

    D2872-04 Standard Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)

    D2940/D2940M-09 Standard Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports

    D2950/D2950M-11 Standard Test Method for Density of Bituminous Concrete in Place by Nuclear Methods

    D2995-99(2009) Standard Practice for Estimating Application Rate of Bituminous Distributors

    D3042-09 Standard Test Method for Insoluble Residue in Carbonate Aggregates

    D3141/D3141M-09 Standard Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements

    D3142/D3142M-11 Standard Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method

    D3143-08 Standard Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus

    D3203/D3203M-11 Standard Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures

    D3279-07 Standard Test Method for n-Heptane Insolubles

    D3289-08 Standard Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)

    D3319-11 Standard Practice for Accelerated Polishing of Aggregates Using the British Wheel

    D3381/D3381M-09a Standard Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction

    D3387-11 Standard Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)

    D3398-00(2006) Standard Test Method for Index of Aggregate Particle Shape and Texture

    D3406-95(2006) Standard Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements

    D3542-08 Standard Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges

    D3549/D3549M-11 Standard Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens

    D3625-96(2005) Standard Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water

    D3628-08 Standard Practice for Selection and Use of Emulsified Asphalts

    D3633-98(2006) Standard Test Method for Electrical Resistivity of Membrane-Pavement Systems

    D3665-07e1 Standard Practice for Random Sampling of Construction Materials

    D3666-11 Standard Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials

    D3744/D3744M-11a Standard Test Method for Aggregate Durability Index

    D3910-11 Standard Practices for Design, Testing, and Construction of Slurry Seal

    D3963/D3963M-01(2007) Standard Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars

    D4013-09 Standard Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor

    D4014-03(2007) Standard Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges

    D4070-08 Standard Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures

    D4071-84(2011) Standard Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems

    D4124-09 Standard Test Method for Separation of Asphalt into Four Fractions

    D4125/D4125M-10 Standard Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method

    D4215-07 Standard Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures

    D4280-08 Standard Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers

    D4311/D4311M-09 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature

    D4383-05e1 Standard Specification for Plowable, Raised Retroreflective Pavement Markers

    D4460-97(2009) Standard Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods

    D4469-11 Standard Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture

    D4505-05 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life

    D4552/D4552M-10 Standard Practice for Classifying Hot-Mix Recycling Agents

    D4561-11 Standard Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials

    D4580-03(2007) Standard Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding

    D4592-05 Standard Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life

    D4602-93(2008) Standard Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment

    D4694-09 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device

    D4695-03(2008) Standard Guide for General Pavement Deflection Measurements

    D4748-10 Standard Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar

    D4788-03(2007) Standard Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography

    D4791-10 Standard Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate

    D4792-00(2006) Standard Test Method for Potential Expansion of Aggregates from Hydration Reactions

    D4867/D4867M-09 Standard Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures

    D4887/D4887M-11 Standard Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials

    D4956-11a Standard Specification for Retroreflective Sheeting for Traffic Control

    D4957-08 Standard Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer

    D5078/D5078M-11 Standard Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements

    D5106-08 Standard Specification for Steel Slag Aggregates for Bituminous Paving Mixtures

    D5148-10 Standard Test Method for Centrifuge Kerosine Equivalent

    D5167-10 Standard Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation

    D5249-10 Standard Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints

    D5329-09 Standard Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements

    D5340-11 Standard Test Method for Airport Pavement Condition Index Surveys

    D5360-09 Standard Practice for Design and Construction of Bituminous Surface Treatments

    D5361/D5361M-11a Standard Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing

    D5404/D5404M-11 Standard Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator

    D5444-08 Standard Test Method for Mechanical Size Analysis of Extracted Aggregate

    D5505-06 Standard Practice for Classifying Emulsified Recycling Agents

    D5506-08 Standard Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials

    D5546-09 Standard Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge

    D5581-07ae1 Standard Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)

    D5624-02(2007) Standard Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications

    D5710-05 Standard Specification for Trinidad Lake Modified Asphalt

    D5801-95(2006)e1 Standard Test Method for Toughness and Tenacity of Bituminous Materials

    D5821-01(2006) Standard Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate

    D5858-96(2008) Standard Guide for Calculating In Situ Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory

    D5893/D5893M-10 Standard Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements

    D5973-97(2007) Standard Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing

    D5977-03(2007) Standard Specification for High Load Rotational Spherical Bearings for Bridges and Structures

    D6084-06 Standard Test Method for Elastic Recovery of Bituminous Materials by Ductilometer

    D6087-08 Standard Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar

    D6114/D6114M-09 Standard Specification for Asphalt-Rubber Binder

    D6153-97(2007) Standard Specification for Materials for Bridge Deck Waterproofing Membrane Systems

    D6154-09 Standard Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction

    D6155-06 Standard Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures

    D6297-01(2007) Standard Specification for Asphaltic Plug Joints for Bridges

    D6307-10 Standard Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method

    D6372-05(2010) Standard Practice for Design, Testing, and Construction of Micro-Surfacing

    D6373-07e1 Standard Specification for Performance Graded Asphalt Binder

    D6390-11 Standard Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures

    D6433-11 Standard Practice for Roads and Parking Lots Pavement Condition Index Surveys

    D6521-08 Standard Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)

    D6607-00(2009) Standard Practice for Inclusion of Precision Statement Variation in Specification Limits

    D6608-00(2006) Standard Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes

    D6626-09 Standard Specification for Performance Graded Trinidad Lake Modified Asphalt Binder

    D6627/D6627M-11 Standard Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures

    D6628-03(2010)e1 Standard Specification for Color of Pavement Marking Materials

    D6648-08 Standard Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)

    D6690-07 Standard Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

    D6703-07 Standard Test Method for Automated Heithaus Titrimetry

    D6704-08 Standard Test Method for Determining the Workability of Asphalt Cold Mix Patching Material

    D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

    D6816-11 Standard Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders

    D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method

    D6924-03(2007) Standard Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges

    D6925-09 Standard Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor

    D6926-10 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus

    D6927-06 Standard Test Method for Marshall Stability and Flow of Bituminous Mixtures

    D6928-10 Standard Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D6929-10 Standard Practice for Freezing of Emulsified Asphalts

    D6930-10 Standard Test Method for Settlement and Storage Stability of Emulsified Asphalts

    D6931-12 Standard Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures

    D6932/D6932M-08 Standard Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures

    D6933-08 Standard Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)

    D6934-08 Standard Test Method for Residue by Evaporation of Emulsified Asphalt

    D6935-11 Standard Test Method for Determining Cement Mixing of Emulsified Asphalt

    D6936-09 Standard Test Method for Determining Demulsibility of Emulsified Asphalt

    D6937-08 Standard Test Method for Determining Density of Emulsified Asphalt

    D6951/D6951M-09 Standard Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications

    D6995-05 Standard Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (G

    D6997-12 Standard Test Method for Distillation of Emulsified Asphalt

    D6998-11 Standard Practice for Evaluating Aggregate Coating using Emulsified Asphalts

    D6999-04 Standard Practice for Miscibility of Emulsified Asphalts

    D7000-11 Standard Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples

    D7063/D7063M-11 Standard Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples

    D7064/D7064M-08e1 Standard Practice for Open-Graded Friction Course (OGFC) Mix Design

    D7113/D7113M-10 Standard Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods

    D7115-10 Standard Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading

    D7116-05 Standard Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements

    D7172-06e1 Standard Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared

    D7173-11 Standard Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt

    D7174-05(2011) Standard Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction

    D7175-08 Standard Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer

    D7196-06 Standard Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples

    D7226-11 Standard Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer

    D7227/D7227M-11 Standard Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus

    D7228-06a(2011) Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures

    D7229-08 Standard Test Method for Preparation and Determination of the Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of the Superpave Gyratory Compactor

    D7312-10 Standard Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)

    D7313-07a Standard Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry

    D7369-11 Standard Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test

    D7370-09 Standard Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion

    D7402-09 Standard Practice for Identifying Cationic Emulsified Asphalts

    D7403-09 Standard Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation

    D7404-07 Standard Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer

    D7405-10a Standard Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer

    D7428-08e1 Standard Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus

    D7460-10 Standard Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending

    D7496-11 Standard Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

    D7497-09 Standard Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique

    D7552-09 Standard Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer

    D7553-10 Standard Test Method for Solubility of Asphalt Materials in N-Propyl Bromide

    D7564/D7564M-09 Standard Practice for Construction of Asphalt-Rubber Cape Seal

    D7585/D7585M-10 Standard Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments

    D7643-10 Standard Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders

    D7741/D7741M-11e1 Standard Test Method for Measurement of Apparent Viscosity of Asphalt-Rubber or Other Asphalt Binders by Using a Rotational Hand Held Viscometer

    E274/E274M-11 Standard Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire

    E303-93(2008) Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester

    E445/E445M-88(2008) Standard Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires

    E501-08 Standard Specification for Standard Rib Tire for Pavement Skid-Resistance Tests

    E524-08 Standard Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests

    E556/E556M-11 Standard Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)

    E660-90(2011) Standard Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine

    E670-09 Standard Test Method for Side Force Friction on Paved Surfaces Using the Mu-Meter

    E867-06 Standard Terminology Relating to Vehicle-Pavement Systems

    E950/E950M-09 Standard Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference

    E965-96(2006) Standard Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique

    E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness

    E1166-00(2009) Standard Guide for Network Level Pavement Management

    E1170-97(2007) Standard Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces

    E1215-93(2007) Standard Specification for Trailers Used for Measuring Vehicular Response to Road Roughness

    E1274-03(2008) Standard Test Method for Measuring Pavement Roughness Using a Profilograph

    E1318-09 Standard Specification for Highway Weigh-in-Motion (WIM) Systems with User Requirements and Test Methods

    E1337-90(2008) Standard Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire

    E1364-95(2005) Standard Test Method for Measuring Road Roughness by Static Level Method

    E1448/E1448M-09 Standard Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness

    E1489-08 Standard Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device

    E1551-08 Standard Specification for Special Purpose, Smooth–Tread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment

    E1656/E1656M-11 Standard Guide for Classification of Automated Pavement Condition Survey Equipment

    E1703/E1703M-10 Standard Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge

    E1777-09 Standard Guide for Prioritization of Data Needs for Pavement Management

    E1778-98a(2008) Standard Terminology Relating to Pavement Distress

    E1844-08 Standard Specification for A Size 10 & 4–5 Smooth-Tread Friction Test Tire

    E1845-09 Standard Practice for Calculating Pavement Macrotexture Mean Profile Depth

    E1859/E1859M-11 Standard Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique

    E1889-97(2009) Standard Guide for Pavement Management Implementation

    E1890-11 Standard Guide for Validating New Area Reference Skid Measurement Systems and Equipment

    E1911-09ae1 Standard Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester

    E1926-08 Standard Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements

    E1927-98(2007) Standard Guide for Conducting Subjective Pavement Ride Quality Ratings

    E1957-04(2010) Standard Practice for Installing Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers

    E1960-07(2011) Standard Practice for Calculating International Friction Index of a Pavement Surface

    E2034-99(2007) Standard Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces

    E2100-04(2010) Standard Practice for Calculating the International Runway Friction Index

    E2101-00(2005) Standard Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer

    E2133-03(2009) Standard Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface

    E2157-09 Standard Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter

    E2213-03(2010) Standard Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems — 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications

    E2259-03a(2011) Standard Guide for Archiving and Retrieving ITS-Generated Data

    E2300-09 Standard Specification for Highway Traffic Monitoring Devices

    E2340/E2340M-11 Standard Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique

    E2341/E2341M-05(2009) Standard Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites

    E2380/E2380M-09 Standard Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter

    E2415-05 Standard Practice for Installing Piezoelectric Highway Traffic Sensors

    E2467-05 Standard Practice for Developing Axle Count Adjustment Factors

    E2468-05 Standard Practice for Metadata to Support Archived Data Management Systems

    E2532-09 Standard Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices

    E2560-07 Standard Specification for Data Format for Pavement Profile

    E2561-07a Standard Practice for the Installation of Inductive Loop Detectors

    E2583-07(2011) Standard Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)

    E2665-08 Standard Specification for Archiving ITS-Generated Traffic Monitoring Data

    E2666-09 Standard Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports

    E2667-09 Standard Practice for Acquiring Intersection Turning Movement Traffic Data

    E2759-10 Standard Practice for Highway Traffic Monitoring Truth-in-Data

    E2793-10e1 Standard Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment

    E2835-11 Standard Test Method for Measuring Deflections using a Portable Impulse Plate Load Test Device

    E2840-11 Standard Practice for Pavement Condition Index Surveys for Interlocking Concrete Roads and Parking Lots

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2012
       Standards: 281
       Pages: 1760

    - 2011
       Standards: 279
       Pages: 1712