ASTM Volume 01.08, January 2012

    Fasteners; Rolling Element Bearings

    Table of Contents

    A0031-04R09 Specification for Steel Rivets and Bars for Rivets, Pressure Vessels
    A0307-10 Specification for Carbon Steel Bolts and Studs, 60 000 PSI Tensile Strength
    A0325-10 Specification for Structural Bolts, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
    A0325M-09 Specification for Structural Bolts, Steel, Heat Treated 830 MPa Minimum Tensile Strength (Metric)
    A0354-07A Specification for Quenched and Tempered Alloy Steel Bolts, Studs, and Other Externally Threaded Fasteners
    A0394-08E01 Specification for Steel Transmission Tower Bolts, Zinc-Coated and Bare
    A0449-10 Specification for Hex Cap Screws, Bolts and Studs, Steel, Heat Treated, 120/105/90 ksi Minimum Tensile Strength, General Use
    A0489-04E01 Specification for Carbon Steel Lifting Eyes
    A0490-10AE01 Specification for Structural Bolts, Alloy Steel, Heat Treated, 150 ksi Minimum Tensile Strength
    A0490M-10E01 Specification for High-Strength Steel Bolts, Classes 10.9 and 10.9.3, for Structural Steel Joints (Metric)
    A0502-03R09 Specification for Rivets, Steel, Structural
    A0563-07A Specification for Carbon and Alloy Steel Nuts
    A0563M-07 Specification for Carbon and Alloy Steel Nuts (Metric)
    A0574-11 Specification for Alloy Steel Socket-Head Cap Screws
    A0574M-11 Specification for Alloy Steel Socket-Head Cap Screws \[Metric\]
    F0432-10 Specification for Roof and Rock Bolts and Accessories
    F0436-11 Specification for Hardened Steel Washers
    F0436M-10 Specification for Hardened Steel Washers (Metric)
    F0467-08E01 Specification for Nonferrous Nuts for General Use
    F0467M-06AE02 Specification for Nonferrous Nuts for General Use (Metric)
    F0468-10 Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use
    F0468M-06E01 Specification for Nonferrous Bolts, Hex Cap Screws, and Studs for General Use (Metric)
    F0541-04E01 Specification for Alloy Steel Eyebolts
    F0547-06 Terminology of Nails for Use with Wood and Wood-Base Materials
    F0568M-07 Specification for Carbon and Alloy Steel Externally Threaded Metric Fasteners (Metric)
    F0592-84R06 Terminology of Collated and Cohered Fasteners and Their Application Tools
    F0593-02R08 Specification for Stainless Steel Bolts, Hex Cap Screws, and Studs
    F0594-09E01 Specification for Stainless Steel Nuts
    F0606-11 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, Direct Tension Indicators, and Rivets
    F0606M-11 Test Methods for Determining the Mechanical Properties of Externally and Internally Threaded Fasteners, Washers, and Rivets (Metric)
    F0680-80R07 Test Methods for Nails
    F0738M-02R08 Specification for Stainless Steel Metric Bolts, Screws, and Studs
    F0788_F0788M-08 Specification for Surface Discontinuities of Bolts, Screws, and Studs, Inch and Metric Series
    F0812_F0812M-07 Specification for Surface Discontinuities of Nuts, Inch and Metric Series
    F0835-04E01 Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws
    F0835M-11 Specification for Alloy Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
    F0836M-02R10 Specification for Style 1 Stainless Steel Metric Nuts (Metric)
    F0837-08 Specification for Stainless Steel Socket Head Cap Screws
    F0837M-02R10 Specification for Stainless Steel Socket Head Cap Screws \[Metric\]
    F0844-07A Specification for Washers, Steel, Plain (Flat), Unhardened for General Use
    F0879-10 Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws
    F0879M-02AR08 Specification for Stainless Steel Socket Button and Flat Countersunk Head Cap Screws (Metric)
    F0880-02R08 Specification for Stainless Steel Socket-Set Screws
    F0880M-02R08 Specification for Stainless Steel Socket Set Screws (Metric)
    F0901-01R07 Specification for Aluminum Transmission Tower Bolts and Nuts
    F0912-04E01 Specification for Alloy Steel Socket Set Screws
    F0912M-04E01 Specification for Alloy Steel Socket Set Screws (Metric)
    F0959-09 Specification for Compressible-Washer-Type Direct Tension Indicators for Use with Structural Fasteners
    F0959M-07 Specification for Compressible-Washer-Type Direct Tension Indicators for Use With Structural Fasteners (Metric)
    F1077-05 Guide for Selection of Committee F16 Fastener Specifications
    F1136-10 Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners
    F1136M-10 Specification for Zinc/Aluminum Corrosion Protective Coatings for Fasteners (Metric)
    F1137-11 Specification for Phosphate/Oil Corrosion Protective Coatings for Fasteners
    F1428-92R05 Specification for Aluminum Particle-Filled Basecoat/Organic or Inorganic Topcoat, Corrosion Protective Coatings for Fasteners
    F1469-11 Guide for Conducting a Repeatability and Reproducibility Study on Test Equipment for Nondestructive Testing
    F1470-09 Practice for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
    F1503-02R07 Practice for Machine/Process Capability Study Procedure
    F1554-07AE01 Specification for Anchor Bolts, Steel, 36, 55, and 105-ksi Yield Strength
    F1575-03R08 Test Method for Determining Bending Yield Moment of Nails
    F1667-11 Specification for Driven Fasteners: Nails, Spikes, and Staples
    F1789-11 Terminology for F16 Mechanical Fasteners
    F1852-08 Specification for |P`Twist Off|P' Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 120/105 ksi Minimum Tensile Strength
    F1940-07A Test Method for Process Control Verification to Prevent Hydrogen Embrittlement in Plated or Coated Fasteners
    F1941-10 Specification for Electrodeposited Coatings on Threaded Fasteners (Unified Inch Screw Threads (UN/UNR))
    F1941M-07 Specification for Electrodeposited Coatings on Threaded Fasteners (Metric)
    F2094_F2094M-11 Specification for Silicon Nitride Bearing Balls
    F2161-10 Guide for Instrument and Precision Bearing Lubricants\MPart 1 Oils
    F2162-01R08 Specification for Bearing, Roller, Needle: Drawn Outer Ring, Full Complement, Without Inner Ring, Open and Closed End, Standard Type
    F2163-01R08 Specification for Ring, Bearing, Inner: for Needle Roller Bearing With Drawn Outer Ring
    F2215-08 Specification for Balls, Bearings, Ferrous and Nonferrous for Use in Bearings, Valves, and Bearing Applications
    F2246-06E01 Specification for Bearing, Roller, Needle: Thick Outer Ring With Rollers and Cage
    F2280-11 Specification for |P`Twist Off|P' Type Tension Control Structural Bolt/Nut/Washer Assemblies, Steel, Heat Treated, 150 ksi Minimum Tensile Strength
    F2281-04 Specification for Stainless Steel and Nickel Alloy Bolts, Hex Cap Screws, and Studs, for Heat Resistance and High Temperature Applications
    F2282-03R09E01 Specification for Quality Assurance Requirements for Carbon and Alloy Steel Wire, Rods, and Bars for Mechanical Fasteners
    F2328-05R11 Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs
    F2328M-07 Test Method for Determining Decarburization and Carburization in Hardened and Tempered Threaded Steel Bolts, Screws and Studs (Metric)
    F2329-05R11 Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners
    F2332-06 Specification for Annular Ball Bearings for Instruments and Precision Rotating Components
    F2403-09 Specification for Inch Series Machine Screws, Carbon Steel, 60 000 psi Tensile Strength
    F2430-04 Specification for Bearing, Roller, Needle: Assembly (Thick Outer Race)
    F2431-04 Specification for Ring Bearing, Inner: For Needle Roller Bearing with Thick Outer Ring
    F2437-11 Specification for Carbon and Alloy Steel Compressible-Washer-Type Direct Tension Indicators for Use with Cap Screws, Bolts, Anchors, and Studs
    F2443-04 Specification for Roller, Bearing, Needle, Ferrous, Solid, Spherical End
    F2444-04 Practice for Damage Prevention of Bearings, and Bearing Components Through Proper Handling Techniques
    F2482-08 Specification for Load-Indicating Externally Threaded Fasteners
    F2488-05 Terminology for Rolling Element Bearings
    F2489-06 Guide for Instrument and Precision Bearing Lubricants\MPart 2 Greases
    F2511-05E01 Specification for Rollers, Bearing, Needle, Ferrous, Solid
    F2590-06E01 Specification for Bearing, Roller, Thrust, Two Channeled Race Surface, Rigid or Flat Seat Type
    F2591-06 Specification for Bearing, Roller, Tapered, Single Row of Rollers (Metric Series)
    F2661-07 Test Method for Determining the Tribological Behavior and the Relative Lifetime of a Fluid Lubricant using the Spiral Orbit Tribometer
    F2674-07 Specification for Zinc Coating, Hot-Dip, Requirements for Application to Carbon and Alloy Steel Bolts, Screws, Washers, Nuts, and Special Threaded Fasteners \[Metric\]
    F2688-08 Guide for System-Based, Customer-Centered Quality Plan for Manufacturers
    F2730_F2730M-11 Specification for Silicon Nitride Cylindrical Bearing Rollers
    F2832-11 Guide for Accelerated Corrosion Testing for Mechanical Fasteners
    F2833-11 Specification for Corrosion Protective Fastener Coatings with Zinc Rich Base Coat and Aluminum Organic/Inorganic Type

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2012
       Standards: 95
       Pages: 1008

    - 2011
       Standards: 98
       Pages: 1012