ASTM Volume 01.05, January 2012

    Steel--Bars, Forgings, Bearing, Chain, Tool

    Table of Contents

    A0029_A0029M-11A Specification for Steel Bars, Carbon and Alloy, Hot-Wrought, General Requirements for
    A0108-07 Specification for Steel Bar, Carbon and Alloy, Cold-Finished
    A0125-96R07 Specification for Steel Springs, Helical, Heat-Treated
    A0255-10 Test Methods for Determining Hardenability of Steel
    A0266_A0266M-11 Specification for Carbon Steel Forgings for Pressure Vessel Components
    A0275_A0275M-08 Practice for Magnetic Particle Examination of Steel Forgings
    A0288-91R08 Specification for Carbon and Alloy Steel Forgings for Magnetic Retaining Rings for Turbine Generators
    A0289_A0289M-97R08 Specification for Alloy Steel Forgings for Nonmagnetic Retaining Rings for Generators
    A0290_A0290M-05R10 Specification for Carbon and Alloy Steel Forgings for Rings for Reduction Gears
    A0291_A0291M-05R10 Specification for Steel Forgings, Carbon and Alloy, for Pinions, Gears and Shafts for Reduction Gears
    A0295_A0295M-09 Specification for High-Carbon Anti-Friction Bearing Steel
    A0304-11 Specification for Carbon and Alloy Steel Bars Subject to End-Quench Hardenability Requirements
    A0311_A0311M-04R10 Specification for Cold-Drawn, Stress-Relieved Carbon Steel Bars Subject to Mechanical Property Requirements
    A0322-07 Specification for Steel Bars, Alloy, Standard Grades
    A0336_A0336M-10A Specification for Alloy Steel Forgings for Pressure and High-Temperature Parts
    A0355-89R06 Specification for Steel Bars, Alloys, for Nitriding
    A0370-11 Test Methods and Definitions for Mechanical Testing of Steel Products
    A0372_A0372M-10 Specification for Carbon and Alloy Steel Forgings for Thin-Walled Pressure Vessels
    A0388_A0388M-11 Practice for Ultrasonic Examination of Steel Forgings
    A0391_A0391M-07 Specification for Grade 80 Alloy Steel Chain
    A0400-69R06 Practice for Steel Bars, Selection Guide, Composition, and Mechanical Properties
    A0413_A0413M-07 Specification for Carbon Steel Chain
    A0418_A0418M-10 Practice for Ultrasonic Examination of Turbine and Generator Steel Rotor Forgings
    A0427_A0427M-10 Specification for Wrought Alloy Steel Rolls for Cold and Hot Reduction
    A0434-06 Specification for Steel Bars, Alloy, Hot-Wrought or Cold-Finished, Quenched and Tempered
    A0456_A0456M-08 Specification for Magnetic Particle Examination of Large Crankshaft Forgings
    A0466_A0466M-07 Specification for Weldless Chain
    A0467_A0467M-07 Specification for Machine and Coil Chain
    A0469_A0469M-07 Specification for Vacuum-Treated Steel Forgings for Generator Rotors
    A0470_A0470M-05R10 Specification for Vacuum-Treated Carbon and Alloy Steel Forgings for Turbine Rotors and Shafts
    A0471_A0471M-09 Specification for Vacuum-Treated Alloy Steel Forgings for Turbine Rotor Disks and Wheels
    A0472_A0472M-07 Specification for Heat Stability of Steam Turbine Shafts and Rotor Forgings
    A0485-09 Specification for High Hardenability Antifriction Bearing Steel
    A0499-89R08 Specification for Steel Bars and Shapes, Carbon Rolled from |P`T|P' Rails
    A0503_A0503M-01R11 Specification for Ultrasonic Examination of Forged Crankshafts
    A0504_A0504M-08 Specification for Wrought Carbon Steel Wheels
    A0508_A0508M-05BR10 Specification for Quenched and Tempered Vacuum-Treated Carbon and Alloy Steel Forgings for Pressure Vessels
    A0521_A0521M-06R11 Specification for Steel, Closed-Impression Die Forgings for General Industrial Use
    A0531_A0531M-91R06 Practice for Ultrasonic Examination of Turbine-Generator Steel Retaining Rings
    A0534-09 Specification for Carburizing Steels for Anti-Friction Bearings
    A0541_A0541M-05R10 Specification for Quenched and Tempered Carbon and Alloy Steel Forgings for Pressure Vessel Components
    A0551_A0551M-08 Specification for Carbon Steel Tires for Railway and Rapid Transit Applications
    A0561-08 Practice for Macroetch Testing of Tool Steel Bars
    A0575-96R07 Specification for Steel Bars, Carbon, Merchant Quality, M-Grades
    A0576-90BR06 Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality
    A0579_A0579M-04AR09 Specification for Superstrength Alloy Steel Forgings
    A0592_A0592M-10 Specification for High-Strength Quenched and Tempered Low-Alloy Steel Forged Parts for Pressure Vessels
    A0597-87R10 Specification for Cast Tool Steel
    A0600-92AR10 Specification for Tool Steel High Speed
    A0604_A0604M-07 Practice for Macroetch Testing of Consumable Electrode Remelted Steel Bars and Billets
    A0646_A0646M-06R11 Specification for Premium Quality Alloy Steel Blooms and Billets for Aircraft and Aerospace Forgings
    A0649_A0649M-10 Specification for Forged Steel Rolls Used for Corrugating Paper Machinery
    A0663_A0663M-89R06 Specification for Steel Bars, Carbon, Merchant Quality, Mechanical Properties
    A0668_A0668M-04R09 Specification for Steel Forgings, Carbon and Alloy, for General Industrial Use
    A0675_A0675M-03R09 Specification for Steel Bars, Carbon, Hot-Wrought, Special Quality, Mechanical Properties
    A0681-08 Specification for Tool Steels Alloy
    A0686-92R10 Specification for Tool Steel, Carbon
    A0689-97R07E01 Specification for Carbon and Alloy Steel Bars for Springs
    A0696-90AR06 Specification for Steel Bars, Carbon, Hot-Wrought or Cold-Finished, Special Quality, for Pressure Piping Components
    A0700-05 Practices for Packaging, Marking, and Loading Methods for Steel Products for Shipment
    A0702-89R06 Specification for Steel Fence Posts and Assemblies, Hot Wrought
    A0711_A0711M-07 Specification for Steel Forging Stock
    A0723_A0723M-10 Specification for Alloy Steel Forgings for High-Strength Pressure Component Application
    A0729_A0729M-09E01 Specification for Alloy Steel Axles, Heat-Treated, for Mass Transit and Electric Railway Service
    A0739-90AR06 Specification for Steel Bars, Alloy, Hot-Wrought, for Elevated Temperature or Pressure-Containing Parts, or Both
    A0745_A0745M-94R09 Practice for Ultrasonic Examination of Austenitic Steel Forgings
    A0751-08 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
    A0756-09 Specification for Stainless Anti-Friction Bearing Steel
    A0765_A0765M-07 Specification for Carbon Steel and Low-Alloy Steel Pressure-Vessel-Component Forgings with Mandatory Toughness Requirements
    A0768_A0768M-05R10 Specification for Vacuum-Treated 12 \% Chromium Alloy Steel Forgings for Turbine Rotors and Shafts
    A0788_A0788M-11 Specification for Steel Forgings, General Requirements
    A0833-08A Practice for Indentation Hardness of Metallic Materials by Comparison Hardness Testers
    A0837_A0837M-06R11 Specification for Steel Forgings, Alloy, for Carburizing Applications
    A0859_A0859M-04R09 Specification for Age-Hardening Alloy Steel Forgings for Pressure Vessel Components
    A0866-09 Specification for Medium Carbon Anti-Friction Bearing Steel
    A0891_A0891M-10 Specification for Precipitation Hardening Iron Base Superalloy Forgings for Turbine Rotor Disks and Wheels
    A0892-09 Guide for Defining and Rating the Microstructure of High Carbon Bearing Steels
    A0906_A0906M-02R10 Specification for Grade 80 and Grade 100 Alloy Steel Chain Slings for Overhead Lifting
    A0909_A0909M-06R11 Specification for Steel Forgings, Microalloy, for General Industrial Use
    A0914_A0914M-92R11 Specification for Steel Bars Subject to Restricted End-Quench Hardenability Requirements
    A0920_A0920M-07 Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, Mechanical Properties
    A0921_A0921M-93R11 Specification for Steel Bars, Microalloy, Hot-Wrought, Special Quality, for Subsequent Hot Forging
    A0939-07 Practice for Ultrasonic Examination from Bored Surfaces of Cylindrical Forgings
    A0940_A0940M-06R11 Specification for Vacuum Treated Steel Forgings, Alloy, Differentially Heat Treated, for Turbine Rotors
    A0941-10A Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
    A0952_A0952M-02R10 Specification for Forged Grade 80 and Grade 100 Steel Lifting Components and Welded Attachment Links
    A0956-06 Test Method for Leeb Hardness Testing of Steel Products
    A0965_A0965M-10 Specification for Steel Forgings, Austenitic, for Pressure and High Temperature Parts
    A0966_A0966M-08 Practice for Magnetic Particle Examination of Steel Forgings Using Alternating Current
    A0973_A0973M-07 Specification for Grade 100 Alloy Steel Chain
    A0982_A0982M-10 Specification for Steel Forgings, Stainless, for Compressor and Turbine Airfoils
    A0983_A0983M-06R11 Specification for Continuous Grain Flow Forged Carbon and Alloy Steel Crankshafts for Medium Speed Diesel Engines
    A0986_A0986M-01R11 Specification for Magnetic Particle Examination of Continuous Grain Flow Crankshaft Forgings
    A1021_A1021M-05R10 Specification for Martensitic Stainless Steel Forgings and Forging Stock for High-Temperature Service
    A1038-10A Test Method for Portable Hardness Testing by the Ultrasonic Contact Impedance Method
    A1040-10 Guide for Specifying Harmonized Standard Grade Compositions for Wrought Carbon, Low-Alloy, and Alloy Steels
    A1048_A1048M-06 Specification for Pressure Vessel Forgings, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten for Elevated Temperature Service
    A1049_A1049M-10 Specification for Stainless Steel Forgings, Ferritic/Austenitic (Duplex), for Pressure Vessels and Related Components
    A1058M-09 Test Methods for Mechanical Testing of Steel Products\MMetric
    E0588-03R09 Practice for Detection of Large Inclusions in Bearing Quality Steel by the Ultrasonic Method
    E0618-07 Test Method for Evaluating Machining Performance of Ferrous Metals Using an Automatic Screw/Bar Machine

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2012
       Standards: 102
       Pages: 874

    - 2011
       Standards: 102
       Pages: 874