ASTM Volume 01.04, January 2012

    Steel--Structural, Reinforcing, Pressure Vessel, Railway

    Table of Contents

    A1-00(2010) Standard Specification for Carbon Steel Tee Rails

    A2-02(2008) Standard Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types

    A3-01(2006) Standard Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)

    A6/A6M-11 Standard Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling

    A20/A20M-11 Standard Specification for General Requirements for Steel Plates for Pressure Vessels

    A36/A36M-08 Standard Specification for Carbon Structural Steel

    A49-01(2006) Standard Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars

    A65-07 Standard Specification for Steel Track Spikes

    A66-07 Standard Specification for Steel Screw Spikes

    A67-00(2010) Standard Specification for Steel Tie Plates, Low-Carbon and High-Carbon Hot-Worked

    A82/A82M-07 Standard Specification for Steel Wire, Plain, for Concrete Reinforcement

    A131/A131M-08 Standard Specification for Structural Steel for Ships

    A183-03(2009) Standard Specification for Carbon Steel Track Bolts and Nuts

    A184/A184M-06(2011) Standard Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement

    A185/A185M-07 Standard Specification for Steel Welded Wire Reinforcement, Plain, for Concrete

    A203/A203M-97(2007)e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Nickel

    A204/A204M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum

    A225/A225M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel

    A242/A242M-04(2009) Standard Specification for High-Strength Low-Alloy Structural Steel

    A263-09 Standard Specification for Stainless Chromium Steel-Clad Plate

    A264-11 Standard Specification for Stainless Chromium-Nickel Steel-Clad Plate

    A265-09 Standard Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate

    A283/A283M-03(2007) Standard Specification for Low and Intermediate Tensile Strength Carbon Steel Plates

    A285/A285M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength

    A299/A299M-09 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon

    A302/A302M-03(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A328/A328M-07 Standard Specification for Steel Sheet Piling

    A353/A353M-09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 % Nickel

    A370-11a Standard Test Methods and Definitions for Mechanical Testing of Steel Products

    A387/A387M-11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum

    A416/A416M-10 Standard Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete

    A421/A421M-10 Standard Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete

    A435/A435M-90(2007) Standard Specification for Straight-Beam Ultrasonic Examination of Steel Plates

    A455/A455M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese

    A496/A496M-07 Standard Specification for Steel Wire, Deformed, for Concrete Reinforcement

    A497/A497M-07 Standard Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete

    A514/A514M-05(2009) Standard Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding

    A515/A515M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service

    A516/A516M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service

    A517/A517M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered

    A529/A529M-05(2009) Standard Specification for High-Strength Carbon-Manganese Steel of Structural Quality

    A533/A533M-09e1 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel

    A537/A537M-08 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel

    A542/A542M-09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium

    A543/A543M-09 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum

    A553/A553M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 Percent Nickel

    A562/A562M-10 Standard Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings

    A572/A572M-07 Standard Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel

    A573/A573M-05(2009) Standard Specification for Structural Carbon Steel Plates of Improved Toughness

    A577/A577M-90(2007) Standard Specification for Ultrasonic Angle-Beam Examination of Steel Plates

    A578/A578M-07 Standard Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications

    A588/A588M-10 Standard Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi [345 MPa] Minimum Yield Point, with Atmospheric Corrosion Resistance

    A612/A612M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service

    A615/A615M-09b Standard Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement

    A633/A633M-01(2011) Standard Specification for Normalized High-Strength Low-Alloy Structural Steel Plates

    A645/A645M-10 Standard Specification for Pressure Vessel Plates, Five Percent Nickel Alloy Steel, Specially Heat Treated

    A648-11 Standard Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe

    A656/A656M-10 Standard Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability

    A662/A662M-03(2007) Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A673/A673M-07 Standard Specification for Sampling Procedure for Impact Testing of Structural Steel

    A690/A690M-07 Standard Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments

    A704/A704M-06(2011) Standard Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement

    A706/A706M-09b Standard Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement

    A709/A709M-11 Standard Specification for Structural Steel for Bridges

    A710/A710M-02(2007) Standard Specification for Precipitation-Strengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates

    A722/A722M-07 Standard Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete

    A724/A724M-09 Standard Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Layered Pressure Vessels

    A734/A734M-87a(2007) Standard Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered

    A735/A735M-03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service

    A736/A736M-03(2007) Standard Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel

    A737/A737M-09 Standard Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel

    A738/A738M-07 Standard Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service

    A751-11 Standard Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products

    A759-10 Standard Specification for Carbon Steel Crane Rails

    A767/A767M-09 Standard Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement

    A769/A769M-05(2010) Standard Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes

    A770/A770M-03(2007) Standard Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications

    A775/A775M-07b Standard Specification for Epoxy-Coated Steel Reinforcing Bars

    A779/A779M-10 Standard Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete

    A786/A786M-05(2009) Standard Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates

    A820/A820M-11 Standard Specification for Steel Fibers for Fiber-Reinforced Concrete

    A821/A821M-10 Standard Specification for Steel Wire, Hard-Drawn for Prestressed Concrete Tanks

    A827/A827M-11 Standard Specification for Plates, Carbon Steel, for Forging and Similar Applications

    A829/A829M-06 Standard Specification for Alloy Structural Steel Plates

    A830/A830M-11 Standard Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements

    A832/A832M-10 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium

    A841/A841M-03a(2007) Standard Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)

    A844/A844M-09 Standard Specification for Steel Plates, 9 % Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process

    A857/A857M-07 Standard Specification for Steel Sheet Piling, Cold Formed, Light Gage

    A871/A871M-03(2007) Standard Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance

    A881/A881M-10 Standard Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties

    A882/A882M-04a(2010) Standard Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand

    A884/A884M-06 Standard Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement

    A886/A886M-10 Standard Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete

    A898/A898M-07 Standard Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes

    A910/A910M-10 Standard Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete

    A911/A911M-11 Standard Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Ties

    A913/A913M-11 Standard Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process

    A933/A933M-10 Standard Specification for Vinyl-Coated Steel Wire and Welded Wire Reinforcement

    A934/A934M-07 Standard Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars

    A941-10a Standard Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys

    A944-10 Standard Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens

    A945/A945M-06(2011) Standard Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness

    A950/A950M-11 Standard Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling

    A951/A951M-11 Standard Specification for Steel Wire for Masonry Joint Reinforcement

    A955/A955M-11e1 Standard Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement

    A970/A970M-09 Standard Specification for Headed Steel Bars for Concrete Reinforcement

    A981/A981M-11 Standard Test Method for Evaluating Bond Strength for 0.600-in. f Diameter Steel Prestressing Strand, Grade 270 [1860], Uncoated, Used in Prestressed Ground Anchors

    A992/A992M-11 Standard Specification for Structural Steel Shapes

    A996/A996M-09b Standard Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement

    A1017/A1017M-11 Standard Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten

    A1022/A1022M-07 Standard Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement

    A1032-04(2010) Standard Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe

    A1034/A1034M-10a Standard Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars

    A1035/A1035M-11 Standard Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement

    A1041/A1041M-04(2009) Standard Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten

    A1043/A1043M-05(2009) Standard Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings

    A1044/A1044M-05(2010) Standard Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete

    A1055/A1055M-10e1 Standard Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars

    A1058-09 Standard Test Methods for Mechanical Testing of Steel Products - Metric

    A1060/A1060M-11 Standard Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1061/A1061M-09 Standard Test Methods for Testing Multi-Wire Steel Strand

    A1064/A1064M-10 Standard Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    A1066/A1066M-11 Standard Specification for High-Strength Low-Alloy Structural Steel Plate Produced by Thermo-Mechanical Controlled Process (TMCP)

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2012
       Standards: 124
       Pages: 832

    - 2011
       Standards: 131
       Pages: 848