ASTM Volume 15.10, June 2011

    Packaging; Flexible Barrier Packaging

    Table of Contents

    D0642-00R10 Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
    D0880-92R08 Test Method for Impact Testing for Shipping Containers and Systems
    D0951-99R10 Test Method for Water Resistance of Shipping Containers by Spray Method
    D0996-10A Terminology of Packaging and Distribution Environments
    D0999-08 Test Methods for Vibration Testing of Shipping Containers
    D1185-98AR09 Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
    D1434-82R09E01 Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
    D1596-97R03 Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
    D1974_D1974M-10 Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
    D1975-95R10 Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
    D2063_D2063M-10 Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures Using Non-Automated (Manual) Torque Testing Equipment
    D2221-01R10 Test Method for Creep Properties of Package Cushioning Materials
    D2658-04R09 Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
    D2860_D2860M-04R10 Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90|SD Angle and Constant Stress
    D3060-94R05 Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
    D3061-97R08 Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
    D3064-97R08 Terminology Relating To Aerosol Products
    D3065-01R06 Test Methods for Flammability of Aerosol Products
    D3069-94R05 Test Method for Delivery Rate of Aerosol Products
    D3070-00R10 Test Method of Rapid Pressure Determination of Pressurized Products
    D3076-00R10 Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
    D3078-02R08E01 Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
    D3079-94R09E01 Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
    D3089-97R08 Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
    D3090-72R08 Practice for Storage Testing of Aerosol Products
    D3091-72R08 Practice for Safe Filling of Low-Pressure Pressurized Products
    D3094-00R10 Test Method for Seepage Rate of Aerosol Products
    D3103-07E01 Test Method for Thermal Insulation Performance of Distribution Packages
    D3198-97R07 Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
    D3330_D3330M-04R10 Test Method for Peel Adhesion of Pressure-Sensitive Tape
    D3332-99R10 Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
    D3469-97R07 Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
    D3470-97R07 Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
    D3472-97R07 Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
    D3474-90R07 Practice for Calibration and Use of Torque Meters Used in Packaging Applications
    D3475-09 Classification of Child-Resistant Packages
    D3481-06 Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
    D3580-95R10 Test Methods for Vibration (Vertical Linear Motion) Test of Products
    D3611-06 Practice for Accelerated Aging of Pressure-Sensitive Tapes
    D3652_D3652M-01R06 Test Method for Thickness of Pressure-Sensitive Tapes
    D3654_D3654M-06 Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
    D3715_D3715M-98R11 Practice for Quality Assurance of Pressure-Sensitive Tapes
    D3759_D3759M-05 Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
    D3810-97R07 Test Method for Minimum Application Torque of Type IA Child-Resistant Closures
    D3811_D3811M-96R06 Test Method for Unwind Force of Pressure-Sensitive Tapes
    D3813_D3813M-98R07 Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
    D3815_D3815M-05 Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
    D3816_D3816M-96R07 Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
    D3833_D3833M-96R06 Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
    D3889_D3889M-96R06 Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
    D3890-05R10 Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
    D3950-10B Specification for Strapping, Nonmetallic (and Joining Methods)
    D3951-10 Practice for Commercial Packaging
    D3953-07A Specification for Strapping, Flat Steel and Seals
    D3968-97R07 Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
    D3985-05R10E01 Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
    D4003-98R09 Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
    D4041_D4041M-05R10E01 Practice for Determining Spray Patterns of Mechanical Pump Dispensers
    D4168-95R08E01 Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
    D4169-09 Practice for Performance Testing of Shipping Containers and Systems
    D4267-07 Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
    D4279-95R09 Test Methods for Water Vapor Transmission of Shipping Containers\MConstant and Cycle Methods
    D4332-01R06 Practice for Conditioning Containers, Packages, or Packaging Components for Testing
    D4333_D4333M-05R10E01 Test Method for the Compatibility of Mechanical Pump Dispenser Components
    D4334-05R10 Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
    D4335-99R10 Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
    D4336-05R10 Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
    D4504-94R05 Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
    D4577-05R10 Test Method for Compression Resistance of a Container Under Constant Load
    D4649-03R09 Guide for Selection and Use of Stretch Wrap Films
    D4675-09E01 Guide for Selection and Use of Flat Strapping Materials
    D4727_D4727M-07 Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
    D4728-06 Test Method for Random Vibration Testing of Shipping Containers
    D4774-06 Specification for User Applied Drug Labels in Anesthesiology
    D4775_D4775M-09 Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
    D4919-03R08 Guide for Testing of Hazardous Materials Packagings
    D4991-07 Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
    D5022-07 Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use
    D5077-90R09 Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
    D5094_D5094M-09 Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
    D5105-05 Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
    D5112-98R09 Test Method for Vibration (Horizontal Linear Motion) Test of Products
    D5118_D5118M-05AE01 Practice for Fabrication of Fiberboard Shipping Boxes
    D5168-09 Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
    D5264-98R11 Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
    D5265-09 Test Method for Bridge Impact Testing
    D5276-98R09 Test Method for Drop Test of Loaded Containers by Free Fall
    D5277-92R08 Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
    D5330_D5330M-06 Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
    D5331-03R09E01 Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
    D5375_D5375M-98R11 Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
    D5414-95R07 Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
    D5415-95R07 Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
    D5416-95R07 Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
    D5445-05 Practice for Pictorial Markings for Handling of Goods
    D5458-95R07 Test Method for Peel Cling of Stretch Wrap Film
    D5459-95R07 Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
    D5486_D5486M-06 Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
    D5487-98R08 Test Method for Simulated Drop of Loaded Containers by Shock Machines
    D5570_D5570M-10 Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
    D5571-94R10 Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
    D5639_D5639M-11 Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
    D5663-97R03 Guide for Validating Recycled Content in Packaging Paper and Paperboard
    D5728-00R06 Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
    D5748-95R07 Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
    D5749-01R06 Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
    D5750_D5750M-95R06 Guide for Width and Length of Pressure-Sensitive Tape
    D6039_D6039M-08 Specification for Open and Covered Wood Crates
    D6055-96R07E01 Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
    D6123_D6123M-97R07 Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
    D6179-07 Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
    D6198-07 Guide for Transport Packaging Design
    D6199-07 Practice for Quality of Wood Members of Containers and Pallets
    D6251_D6251M-07E02 Specification for Wood-Cleated Panelboard Shipping Boxes
    D6252_D6252M-98R11 Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90|SD Angle
    D6253-10 Practice for Treatment and/or Marking of Wood Packaging Materials
    D6254_D6254M-07 Specification for Wirebound Pallet-Type Wood Boxes
    D6255_D6255M-05R11 Specification for Steel or Aluminum Slotted Angle Crates
    D6256_D6256M-10 Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
    D6295_D6295M-98R11 Test Method for Dispensability of Light\NDuty Pressure\NSensitive Film Tape
    D6344-04R09 Test Method for Concentrated Impacts to Transport Packages
    D6398-08 Practice to Enhance Identification of Drug Names on Labels
    D6534-05R10 Test Method for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
    D6535_D6535M-05R10E01 Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
    D6536_D6536M-00R10E01 Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
    D6537-00R06 Practice for Instrumented Package Shock Testing For Determination of Package Performance
    D6551_D6551M-05 Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
    D6573_D6573M-01R07 Specification for General Purpose Wirebound Shipping Boxes
    D6590_D6590M-00R06 Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
    D6633-05R10 Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
    D6653_D6653M-01R10E01 Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
    D6654-05R10 Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
    D6655-01R07 Terminology Relating to Mechanical Pump Dispensers
    D6787-02R07 Specification for Repositionable Note Pad
    D6788-02R07 Specification for Repositionable Pressure-Sensitive Flags
    D6804-02R07 Guide for Hand Hole Design in Corrugated Boxes
    D6834-02R08 Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
    D6880-05 Specification for Wood Boxes
    D6881_D6881M-03R08E01 Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
    D7030-04R09 Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
    D7257-06 Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
    D7298-06R11E01 Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
    D7386-08 Practice for Performance Testing of Packages for Single Parcel Delivery Systems
    D7387-07 Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
    D7434-08 Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Palletized or Unitized Loads
    D7435-08 Test Method for Determining the Performance of Passive Radio Frequency Identification (RFID) Transponders on Loaded Containers
    D7478_D7478M-08E01 Specification for Heavy Duty Sheathed Wood Crates
    D7580_D7580M-09 Test Method for Rotary Stretch Wrapper Method for Determining the Readability of Passive RFID Transponders on Homogenous Palletized or Unitized Loads
    D7660-10 Guide for Conducting Internal Pressure Tests on United Nations (UN) Packagings
    D7709-11 Test Methods for Measuring Water Vapor Transmission Rate (WVTR) of Pharmaceutical Bottles and Blisters
    E0171-94R07 Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
    E0398-03R09E01 Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
    F0017-08 Terminology Relating to Flexible Barrier Packaging
    F0034-02R07 Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
    F0088_F0088M-09 Test Method for Seal Strength of Flexible Barrier Materials
    F0099-07 Guide for Writing a Specification for Flexible Barrier Rollstock Materials
    F0119-82R08 Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
    F0392-93R04 Test Method for Flex Durability of Flexible Barrier Materials
    F0874-98R08 Test Method for Temperature Measurement and Profiling for Microwave Susceptors
    F0904-98R08 Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
    F1115-95R08E01 Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
    F1140-07 Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
    F1249-06 Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
    F1278-96R08 Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
    F1306-90R08E01 Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
    F1307-02R07 Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
    F1308-98R08 Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
    F1317-98R07 Test Method for Calibration of Microwave Ovens
    F1349-08 Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
    F1416-96R08 Guide for Selection of Time-Temperature Indicators
    F1500-98R08 Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
    F1519-98R08 Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
    F1608-00R09 Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
    F1884-04R11 Test Methods for Determining Residual Solvents in Packaging Materials
    F1886_F1886M-09 Test Method for Determining Integrity of Seals for Flexible Packaging by Visual Inspection
    F1921-98R04 Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
    F1927-07 Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
    F1929-98R04 Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
    F1980-07 Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
    F2013-10 Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
    F2029-08 Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
    F2054-07 Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
    F2095-07E01 Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
    F2096-04 Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
    F2097-10 Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
    F2203-02R07 Test Method for Linear Measurement Using Precision Steel Rule
    F2217-02R07 Practice for Coating/Adhesive Weight Determination
    F2227-02R07 Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method
    F2228-02R07 Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
    F2250-03R08 Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
    F2251-03R08 Test Method for Thickness Measurement of Flexible Packaging Material
    F2252-03R08 Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
    F2338-09 Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
    F2391-05R11 Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
    F2475-11 Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
    F2476-05 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co 2TR) Through Barrier Materials Using An Infrared Detector
    F2559_F2559M-06R10E01 Guide for Writing a Specification for Sterilizable Peel Pouches
    F2622-08E01 Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using Various Sensors
    F2638-07 Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
    F2714-08 Test Method for Oxygen Headspace Analysis of Packages Using Fluorescent Decay
    F2824-10E01 Test Method for Mechanical Seal Strength Testing for Round Cups and Bowl Containers with Flexible Peelable Lids
    F2825-10E01 Practice for Climatic Stressing of Packaging Systems for Single Parcel Delivery

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 198
       Pages: 1172

    - 2010
       Standards: 199
       Pages: 1174