ASTM Volume 15.03, October 2011

    Space Simulation; Aerospace and Aircraft; Composite Materials

    Table of Contents

    C0271_C0271M-11 Test Method for Density of Sandwich Core Materials
    C0272-01R07 Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
    C0273_C0273M-07A Test Method for Shear Properties of Sandwich Core Materials
    C0274-07 Terminology of Structural Sandwich Constructions
    C0297_C0297M-04R10 Test Method for Flatwise Tensile Strength of Sandwich Constructions
    C0363_C0363M-09 Test Method for Node Tensile Strength of Honeycomb Core Materials
    C0364_C0364M-07 Test Method for Edgewise Compressive Strength of Sandwich Constructions
    C0365_C0365M-11 Test Method for Flatwise Compressive Properties of Sandwich Cores
    C0366_C0366M-11 Test Methods for Measurement of Thickness of Sandwich Cores
    C0393_C0393M-06 Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
    C0394-00R08 Test Method for Shear Fatigue of Sandwich Core Materials
    C0480_C0480M-08 Test Method for Flexure Creep of Sandwich Constructions
    C0481-99R05 Test Method for Laboratory Aging of Sandwich Constructions
    C0613_C0613M-97R08 Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
    D2344_D2344M-00R06 Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
    D3039_D3039M-08 Test Method for Tensile Properties of Polymer Matrix Composite Materials
    D3171-09 Test Methods for Constituent Content of Composite Materials
    D3410_D3410M-03R08 Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
    D3479_D3479M-96R07 Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
    D3518_D3518M-94R07 Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a |m@45|SD Laminate
    D3529M-10 Test Methods for Constituent Content of Composite Prepreg
    D3530_D3530M-97R08 Test Method for Volatiles Content of Composite Material Prepreg
    D3531-99R09 Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
    D3532-99R09 Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
    D3552-96R07 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
    D3800-99R10 Test Method for Density of High-Modulus Fibers
    D3878-07 Terminology for Composite Materials
    D4018-99R08 Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
    D4102-82R08 Test Method for Thermal Oxidative Resistance of Carbon Fibers
    D4255_D4255M-01R07 Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
    D4762-11 Guide for Testing Polymer Matrix Composite Materials
    D5229_D5229M-92R10 Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
    D5379_D5379M-05 Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
    D5448_D5448M-93R06 Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
    D5449_D5449M-93R06 Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
    D5450_D5450M-93R06 Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
    D5467_D5467M-97R10 Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
    D5528-01R07E03 Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    D5687_D5687M-95R07 Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
    D5766_D5766M-11 Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
    D5961_D5961M-10 Test Method for Bearing Response of Polymer Matrix Composite Laminates
    D6115-97R04 Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
    D6264_D6264M-07 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
    D6415_D6415M-06AE01 Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
    D6416_D6416M-01R07 Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
    D6484_D6484M-09 Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
    D6507-11 Practice for Fiber Reinforcement Orientation Codes for Composite Materials
    D6641_D6641M-09 Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
    D6671_D6671M-06 Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
    D6742_D6742M-07 Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
    D6772-02R07 Test Method for Dimensional Stability of Sandwich Core Materials
    D6790-02R07 Test Method for Determining Poisson's Ratio of Honeycomb Cores
    D6856_D6856M-03R08E01 Guide for Testing Fabric-Reinforced |P`Textile|P' Composite Materials
    D6873_D6873M-08 Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
    D7028-07E01 Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
    D7078_D7078M-05 Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
    D7136_D7136M-07 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
    D7137_D7137M-07 Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
    D7205_D7205M-06 Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
    D7248_D7248M-08 Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
    D7249_D7249M-06 Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
    D7250_D7250M-06 Practice for Determining Sandwich Beam Flexural and Shear Stiffness
    D7264_D7264M-07 Test Method for Flexural Properties of Polymer Matrix Composite Materials
    D7290-06 Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
    D7291_D7291M-07 Test Method for Through-Thickness |P`Flatwise|P' Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
    D7332_D7332M-09 Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
    D7336_D7336M-07 Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
    D7337_D7337M-07 Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
    D7522_D7522M-09 Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate
    D7565_D7565M-10 Test Method for Determining Tensile Properties of Fiber Reinforced Polymer Matrix Composites Used for Strengthening of Civil Structures
    D7615_D7615M-11 Practice for Open-Hole Fatigue Response of Polymer Matrix Composite Laminates
    D7616_D7616M-11 Test Method for Determining Apparent Overlap Splice Shear Strength Properties of Wet Lay-Up Fiber-Reinforced Polymer Matrix Composites Used for Strengthening Civil Structures
    D7617_D7617M-11 Test Method for Transverse Shear Strength of Fiber-reinforced Polymer Matrix Composite Bars
    E0285-08 Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
    E0295-82R06 Test Method for Measured Speed of Oil Diffusion Pumps
    E0296-70R10 Practice for Ionization Gage Application to Space Simulators
    E0307-72R08 Test Method for Normal Spectral Emittance at Elevated Temperatures
    E0341-08 Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
    E0349-06 Terminology Relating to Space Simulation
    E0377-08 Practice for Internal Temperature Measurements in Low-Conductivity Materials
    E0408-71R08 Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
    E0422-05 Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
    E0423-71R08 Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
    E0434-10 Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
    E0457-08 Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
    E0458-08 Test Method for Heat of Ablation
    E0459-05 Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
    E0471-96R11 Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
    E0490-00AR06 Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
    E0491-73R10 Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
    E0511-07 Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
    E0512-94R10 Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
    E0595-07 Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
    E0598-08 Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
    E0637-05 Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
    E0834-09 Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
    E1216-06 Practice for Sampling for Particulate Contamination by Tape Lift
    E1234-07 Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
    E1235-08 Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
    E1309-00R05 Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
    E1434-00R06 Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
    E1471-92R08 Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
    E1548-09 Practice for Preparation of Aerospace Contamination Control Plans
    E1549-06 Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
    E1559-09 Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
    E1560-06 Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
    E1731-11 Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
    E1997-07 Practice for the Selection of Spacecraft Materials
    E2042_E2042M-09 Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
    E2088-06 Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
    E2089-00R06 Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
    E2090-06 Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
    E2217-02R07 Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
    E2311-04R09 Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
    E2312-11 Practice for Tests of Cleanroom Materials
    E2352-04R10 Practice for Aerospace Cleanrooms and Associated Controlled Environments\MCleanroom Operations
    E2683-09 Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
    E2684-09 Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
    F0021-65R07 Test Method for Hydrophobic Surface Films by the Atomizer Test
    F0022-02R07 Test Method for Hydrophobic Surface Films by the Water-Break Test
    F0024-09 Test Method for Measuring and Counting Particulate Contamination on Surfaces
    F0025_F0025M-09 Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
    F0050-07 Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
    F0051-00R07 Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
    F0091-06 Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
    F0302-09 Practice for Field Sampling of Aerospace Fluids in Containers
    F0303-08 Practices for Sampling for Particles in Aerospace Fluids and Components
    F0307-02R07 Practice for Sampling Pressurized Gas for Gas Analysis
    F0309-04R10 Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
    F0310-07 Practice for Sampling Cryogenic Aerospace Fluids
    F0311-08 Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
    F0312-08 Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
    F0318-06 Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
    F0319-09 Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
    F0320-10 Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
    F0326-96R06 Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
    F0327-08 Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
    F0330-10 Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
    F0331-05 Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
    F0428-09 Test Method for Intensity of Scratches on Aerospace Glass Enclosures
    F0482-09 Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
    F0483-09 Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
    F0484-08 Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
    F0485-08 Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
    F0502-08 Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
    F0519-10 Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
    F0520-10 Test Method for Environmental Resistance of Aerospace Transparencies to Artificially Induced Exposures
    F0521-83R10 Test Methods for Bond Integrity of Transparent Laminates
    F0548-09 Test Method for Intensity of Scratches on Aerospace Transparent Plastics
    F0733-09 Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
    F0734-95R06 Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
    F0735-06 Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
    F0736-95R06 Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
    F0790-08 Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
    F0791-96R08 Test Method for Stress Crazing of Transparent Plastics
    F0801-96R08 Test Method for Measuring Optical Angular Deviation of Transparent Parts
    F0942-02R08 Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
    F0945-06 Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
    F1080-93R08 Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
    F1104-02R08 Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
    F1105-09 Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
    F1110-09 Test Method for Sandwich Corrosion Test
    F1111-08B Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
    F1113-87R05E01 Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
    F1164-97R09E01 Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
    F1165-10 Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
    F1181-09 Test Method for Measuring Binocular Disparity in Transparent Parts
    F1252-10 Test Method for Measuring Optical Reflectivity of Transparent Materials
    F1316-90R08 Test Method for Measuring the Transmissivity of Transparent Parts
    F1362-09 Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
    F1459-06 Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
    F1624-09 Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
    F1645_F1645M-07 Test Method for Water Migration in Honeycomb Core Materials
    F1863-10 Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
    F1864-05R10 Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
    F2078-08A Terminology Relating to Hydrogen Embrittlement Testing
    F2108-06 Practice for Inspection of Transparent Parts by Prism
    F2109-01R05 Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
    F2111-01AR05E01 Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
    F2156-06 Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
    F2429-05R10 Terminology Relating to Aerospace Transparent Materials and Enclosures
    F2469-10 Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 184
       Pages: 1430

    - 2010
       Standards: 184
       Pages: 1400