ASTM Volume 14.02, July 2011

    General Test Methods; Forensic Psychophysiology; Forensic Sciences; Terminology; Conformity Assessment; Statistical Methods; Nanotechnology; Forensic Engineering; Manufacture of Pharmaceutical Products

    Table of Contents

    E0011-09E01 Specification for Woven Wire Test Sieve Cloth and Test Sieves
    E0029-08 Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
    E0105-10 Practice for Probability Sampling of Materials
    E0122-09 Practice for Calculating Sample Size to Estimate, With Specified Precision, the Average for a Characteristic of a Lot or Process
    E0141-10 Practice for Acceptance of Evidence Based on the Results of Probability Sampling
    E0161-00R10 Specification for Precision Electroformed Sieves
    E0177-10 Practice for Use of the Terms Precision and Bias in ASTM Test Methods
    E0178-08 Practice for Dealing With Outlying Observations
    E0228-06 Test Method for Linear Thermal Expansion of Solid Materials With a Push-Rod Dilatometer
    E0289-04R10 Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
    E0323-09 Specification for Perforated-Plate Sieves for Testing Purposes
    E0444-09 Guide for Scope of Work of Forensic Document Examiners
    E0454-09 Specification for Industrial Perforated Plate and Screens (Square Opening Series)
    E0456-08E03 Terminology Relating to Quality and Statistics
    E0473-10 Terminology Relating to Thermal Analysis and Rheology
    E0487-09 Test Method for Constant-Temperature Stability of Chemical Materials
    E0502-07E01 Test Method for Selection and Use of ASTM Standards for the Determination of Flash Point of Chemicals by Closed Cup Methods
    E0537-07 Test Method for The Thermal Stability of Chemicals by Differential Scanning Calorimetry
    E0541-10 Specification for Agencies Engaged in System Analysis and Compliance Assurance for Manufactured Building
    E0582-07 Test Method for Minimum Ignition Energy and Quenching Distance in Gaseous Mixtures
    E0620-04 Practice for Reporting Opinions of Scientific or Technical Experts
    E0651_E0651M-01R08 Practice for Evaluating Capabilities of Agencies Involved in System Analysis and Compliance Assurance for Manufactured Building
    E0659-78R05 Test Method for Autoignition Temperature of Liquid Chemicals
    E0674-09 Specification for Industrial Perforated Plate and Screens (Round Opening Series)
    E0678-07 Practice for Evaluation of Scientific or Technical Data
    E0680-79R05 Test Method for Drop Weight Impact Sensitivity of Solid-Phase Hazardous Materials
    E0681-09 Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
    E0691-09E01 Practice for Conducting an Interlaboratory Study to Determine the Precision of a Test Method
    E0698-11 Test Method for Arrhenius Kinetic Constants for Thermally Unstable Materials Using Differential Scanning Calorimetry and the Flynn/Wall/Ozawa Method
    E0699-09 Practice for Evaluation of Agencies Involved in Testing, Quality Assurance, and Evaluating of Building Components
    E0793-06 Test Method for Enthalpies of Fusion and Crystallization by Differential Scanning Calorimetry
    E0794-06 Test Method for Melting And Crystallization Temperatures By Thermal Analysis
    E0799-03R09 Practice for Determining Data Criteria and Processing for Liquid Drop Size Analysis
    E0831-06 Test Method for Linear Thermal Expansion of Solid Materials by Thermomechanical Analysis
    E0860-07 Practice for Examining And Preparing Items That Are Or May Become Involved In Criminal or Civil Litigation
    E0918-83R05 Practice for Determining Limits of Flammability of Chemicals at Elevated Temperature and Pressure
    E0928-08 Test Method for Purity by Differential Scanning Calorimetry
    E0967-08 Test Method for Temperature Calibration of Differential Scanning Calorimeters and Differential Thermal Analyzers
    E0968-02R08 Practice for Heat Flow Calibration of Differential Scanning Calorimeters
    E1020-96R06 Practice for Reporting Incidents that May Involve Criminal or Civil Litigation
    E1131-08 Test Method for Compositional Analysis by Thermogravimetry
    E1142-10 Terminology Relating to Thermophysical Properties
    E1169-07 Practice for Conducting Ruggedness Tests
    E1188-05 Practice for Collection and Preservation of Information and Physical Items by a Technical Investigator
    E1225-09 Test Method for Thermal Conductivity of Solids by Means of the Guarded-Comparative-Longitudinal Heat Flow Technique
    E1226-10 Test Method for Explosibility of Dust Clouds
    E1231-10 Practice for Calculation of Hazard Potential Figures-of-Merit for Thermally Unstable Materials
    E1232-07 Test Method for Temperature Limit of Flammability of Chemicals
    E1260-03R09 Test Method for Determining Liquid Drop Size Characteristics in a Spray Using Optical Nonimaging Light-Scattering Instruments
    E1269-05 Test Method for Determining Specific Heat Capacity by Differential Scanning Calorimetry
    E1301-95R03 Guide for Proficiency Testing by Interlaboratory Comparisons
    E1323-09 Guide for Evaluating Laboratory Measurement Practices and the Statistical Analysis of the Resulting Data
    E1325-02R08 Terminology Relating to Design of Experiments
    E1356-08 Test Method for Assignment of the Glass Transition Temperatures by Differential Scanning Calorimetry
    E1363-08 Test Method for Temperature Calibration of Thermomechanical Analyzers
    E1386-10 Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Solvent Extraction
    E1388-05 Practice for Sampling of Headspace Vapors from Fire Debris Samples
    E1402-08E01 Guide for Sampling Design
    E1412-07 Practice for Separation of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration With Activated Charcoal
    E1413-07 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Dynamic Headspace Concentration
    E1422-05 Guide for Test Methods for Forensic Writing Ink Comparison
    E1445-08 Terminology Relating to Hazard Potential of Chemicals
    E1459-92R05 Guide for Physical Evidence Labeling and Related Documentation
    E1461-07 Test Method for Thermal Diffusivity by the Flash Method
    E1488-09 Guide for Statistical Procedures to Use in Developing and Applying Test Methods
    E1491-06 Test Method for Minimum Autoignition Temperature of Dust Clouds
    E1492-05 Practice for Receiving, Documenting, Storing, and Retrieving Evidence in a Forensic Science Laboratory
    E1515-07 Test Method for Minimum Explosible Concentration of Combustible Dusts
    E1530-06 Test Method for Evaluating the Resistance to Thermal Transmission of Materials by the Guarded Heat Flow Meter Technique
    E1545-05 Test Method for Assignment of the Glass Transition Temperature by Thermomechanical Analysis
    E1582-10 Practice for Calibration of Temperature Scale for Thermogravimetry
    E1588-10E01 Guide for Gunshot Residue Analysis by Scanning Electron Microscopy/Energy Dispersive X-Ray Spectrometry
    E1610-02R08 Guide for Forensic Paint Analysis and Comparison
    E1617-09 Practice for Reporting Particle Size Characterization Data
    E1618-10 Test Method for Ignitable Liquid Residues in Extracts from Fire Debris Samples by Gas Chromatography-Mass Spectrometry
    E1620-97R04 Terminology Relating to Liquid Particles and Atomization
    E1638-10 Terminology Relating to Sieves, Sieving Methods, and Screening Media
    E1640-09 Test Method for Assignment of the Glass Transition Temperature By Dynamic Mechanical Analysis
    E1641-07 Test Method for Decomposition Kinetics by Thermogravimetry
    E1658-08 Terminology for Expressing Conclusions of Forensic Document Examiners
    E1719-05 Test Method for Vapor Pressure of Liquids by Ebulliometry
    E1732-09 Terminology Relating to Forensic Science
    E1782-08 Test Method for Determining Vapor Pressure by Thermal Analysis
    E1789-04 Guide for Writing Ink Identification
    E1824-09E01 Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
    E1843-96R10 Guide for Sexual Assault Investigation, Examination, and Evidence Collection
    E1858-08 Test Method for Determining Oxidation Induction Time of Hydrocarbons by Differential Scanning Calorimetry
    E1860-07 Test Method for Elapsed Time Calibration of Thermal Analyzers
    E1867-06 Test Method for Temperature Calibration of Dynamic Mechanical Analyzers
    E1868-10 Test Method for Loss-On-Drying by Thermogravimetry
    E1877-00R10 Practice for Calculating Thermal Endurance of Materials from Thermogravimetric Decomposition Data
    E1919-09 Guide for Worldwide Published Standards Relating to Particle and Spray Characterization
    E1952-06 Test Method for Thermal Conductivity and Thermal Diffusivity by Modulated Temperature Differential Scanning Calorimetry
    E1953-07 Practice for Description of Thermal Analysis and Rheology Apparatus
    E1954-05R11 Practice for Conduct of Research in Psychophysiological Detection of Deception (Polygraph)
    E1967-98R03 Test Method for the Automated Determination of Refractive Index of Glass Samples Using the Oil Immersion Method and a Phase Contrast Microscope
    E1968-98R03 Guide for Microcrystal Testing in the Forensic Analysis of Cocaine
    E1969-06 Guide for Microcrystal Testing in the Forensic Analysis of Methamphetamine and Amphetamine
    E1970-06 Practice for Statistical Treatment of Thermoanalytical Data
    E1981-98R04 Guide for Assessing Thermal Stability of Materials by Methods of Accelerating Rate Calorimetry
    E1994-09 Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
    E2000-05 Guide for Minimum Basic Education and Training of Individuals Involved in the Detection of Deception (PDD)
    E2008-08 Test Method for Volatility Rate by Thermogravimetry
    E2009-08 Test Method for Oxidation Onset Temperature of Hydrocarbons by Differential Scanning Calorimetry
    E2012-06 Guide for the Preparation of a Binary Chemical Compatibility Chart
    E2016-06 Specification for Industrial Woven Wire Cloth
    E2019-03R07 Test Method for Minimum Ignition Energy of a Dust Cloud in Air
    E2021-09 Test Method for Hot-Surface Ignition Temperature of Dust Layers
    E2031-99R10 Practice for Quality Control of Psychophysiological Detection of Deception (Polygraph) Examinations
    E2035-11 Terminology Relating to Forensic Psychophysiology
    E2040-08 Test Method for Mass Scale Calibration of Thermogravimetric Analyzers
    E2041-08E01 Test Method for Estimating Kinetic Parameters by Differential Scanning Calorimeter Using the Borchardt and Daniels Method
    E2046-08 Test Method for Reaction Induction Time by Thermal Analysis
    E2057-10 Specifications for Preparation of Laboratory Analysis Requests in Sexual Assault Investigations
    E2062-11 Guide for PDD Examination Standards of Practice
    E2063-05R11 Practice for Calibration and Functionality Checks Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
    E2064-00R06 Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD)
    E2065-05 Guide for Ethical Requirements for Psychophysiological Detection of Deception (PDD) Examiners
    E2069-06 Test Method for Temperature Calibration on Cooling of Differential Scanning Calorimeters
    E2070-08 Test Method for Kinetic Parameters by Differential Scanning Calorimetry Using Isothermal Methods
    E2071-00R10 Practice for Calculating Heat of Vaporization or Sublimation from Vapor Pressure Data
    E2079-07 Test Methods for Limiting Oxygen (Oxidant) Concentration in Gases and Vapors
    E2080-06 Guide for Clinical Psychophysiological Detection of Deception (PDD) Examinations for Sex Offenders
    E2092-09 Test Method for Distortion Temperature in Three-Point Bending by Thermomechanical Analysis
    E2113-09 Test Method for Length Change Calibration of Thermomechanical Analyzers
    E2123-10 Practice for Transmittal of Evidence in Sexual Assault Investigation
    E2124-10 Practice for Specification for Equipment and Supplies in Sexual Assault Investigations
    E2125-07 Guide for Microcrystal Testing in the Forensic Analysis of Phencyclidine and Its Analogues
    E2154-01R08 Practice for Separation and Concentration of Ignitable Liquid Residues from Fire Debris Samples by Passive Headspace Concentration with Solid Phase Microextraction (SPME)
    E2159-01R08 Guide for Selection, Assignment, and Monitoring of Persons To Be Utilized as Assessors/Auditors or Technical Experts
    E2160-04 Test Method for Heat of Reaction of Thermally Reactive Materials by Differential Scanning Calorimetry
    E2161-08 Terminology Relating to Performance Validation in Thermal Analysis
    E2162-07 Guide for Minimum Continuing Education of Individuals Involved in Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders
    E2163-06 Guide for Minimum Training Requirements for Examiners Conducting Psychophysiological Detection of Deception (PDD) Testing of Sex Offenders in Treatment, Probation or Other Similar Programs
    E2195-09 Terminology Relating to the Examination of Questioned Documents
    E2206-06 Test Method for Force Calibration Of Thermomechnical Analyzers
    E2224-10 Guide for Forensic Analysis of Fibers by Infrared Spectroscopy
    E2225-10 Guide for Forensic Examination of Fabrics and Cordage
    E2227-02R08 Guide for Forensic Examination of Non-Reactive Dyes in Textile Fibers by Thin-Layer Chromatography
    E2228-10 Guide for Microscopical Examination of Textile Fibers
    E2229-09 Practices for Interpretation of Psychophysiological Detection of Deception (Polygraph) Data
    E2234-09 Practice for Sampling a Stream of Product by Attributes Indexed by AQL
    E2253-08E01 Test Method for Enthalpy Measurement Validation of Differential Scanning Calorimeters
    E2254-09 Test Method for Storage Modulus Calibration of Dynamic Mechanical Analyzers
    E2281-08A Practice for Process and Measurement Capability Indices
    E2282-09 Guide for Defining the Test Result of a Test Method
    E2285-08 Guide for Examination of Mechanical Checkwriter Impressions
    E2286-08A Guide for Examination of Dry Seal Impressions
    E2287-09 Guide for Examination of Fracture Patterns and Paper Fiber Impressions on Single-Strike Film Ribbons and Typed Text
    E2288-09 Guide for Physical Match of Paper Cuts, Tears, and Perforations in Forensic Document Examinations
    E2289-08 Guide for Examination of Rubber Stamp Impressions
    E2290-07A Guide for Examination of Handwritten Items
    E2291-03 Guide for Indentation Examinations
    E2292-04 Practice for Investigation of Investigating Carbon Monoxide Poisoning Incidents
    E2324-04 Guide for PDD Paired Testing
    E2325-05E01 Guide for Non-destructive Examination of Paper
    E2326-09 Practice for Education and Training of Seized-Drug Analysts
    E2327-10 Practice for Quality Assurance of Laboratories Performing Seized-Drug Analysis
    E2329-10 Practice for Identification of Seized Drugs
    E2330-04 Test Method for Determination of Trace Elements in Glass Samples Using Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
    E2331-04 Guide for Examination of Altered Documents
    E2332-04 Practice for Investigation and Analysis of Physical Component Failures
    E2334-09 Practice for Setting an Upper Confidence Bound For a Fraction or Number of Non-Conforming items, or a Rate of Occurrence for Non-conformities, Using Attribute Data, When There is a Zero Response in the Sample
    E2345-04 Practice for Investigating Electrical Incidents
    E2347-05 Test Method for Indentation Softening Temperature by Thermomechanical Analysis
    E2363-06A Terminology Relating to Process Analytical Technology in the Pharmaceutical Industry
    E2386-04 Guide for the Conduct of PDD Screening Examinations
    E2388-11 Guide for Minimum Training Requirements for Forensic Document Examiners
    E2389-05 Guide for Examination of Documents Produced with Liquid Ink Jet Technology
    E2390-06 Guide for Examination of Documents Produced with Toner Technology
    E2402-05 Test Method for Mass Loss and Residue Measurement Validation of Thermogravimetric Analyzers
    E2403-06 Test Method for Sulfated Ash of Organic Materials by Thermogravimetry
    E2425-05 Test Method for Loss Modulus Conformance of Dynamic Mechanical Analyzers
    E2427-05 Test Method for Acceptance by Performance Testing of U.S. Standard Test Sieves
    E2439-09 Guide for Instrumentation, Sensors and Operating Software Used in Forensic Psychophysiological Detection of Deception (Polygraph) Examinations
    E2451-08 Practice for Preserving Ignitable Liquids and Ignitable Liquid Residue Extracts from Fire Debris Samples
    E2474-06 Practice for Pharmaceutical Process Design Utilizing Process Analytical Technology
    E2475-10 Guide for Process Understanding Related to Pharmaceutical Manufacture and Control
    E2476-09 Guide for Risk Assessment and Risk Control as it Impacts the Design, Development, and Operation of PAT Processes for Pharmaceutical Manufacture
    E2489-06E01 Practice for Statistical Analysis of One-Sample and Two-Sample Interlaboratory Proficiency Testing Programs
    E2490-09 Guide for Measurement of Particle Size Distribution of Nanomaterials in Suspension by Photon Correlation Spectroscopy (PCS)
    E2493-07 Guide for the Collection of Non-Volatile Memory Data in Evidentiary Vehicle Electronic Control Units
    E2494-08 Guide for Examination of Typewritten Items
    E2500-07 Guide for Specification, Design, and Verification of Pharmaceutical and Biopharmaceutical Manufacturing Systems and Equipment
    E2503-07 Practice for Qualification of Basket and Paddle Dissolution Apparatus
    E2509-08 Test Method for Temperature Calibration of Rheometers in Isothermal Mode
    E2510-07 Test Method for Torque Calibration or Conformance of Rheometers
    E2524-08 Test Method for Analysis of Hemolytic Properties of Nanoparticles
    E2525-08 Test Method for Evaluation of the Effect of Nanoparticulate Materials on the Formation of Mouse Granulocyte-Macrophage Colonies
    E2526-08 Test Method for Evaluation of Cytotoxicity of Nanoparticulate Materials in Porcine Kidney Cells and Human Hepatocarcinoma Cells
    E2535-07 Guide for Handling Unbound Engineered Nanoscale Particles in Occupational Settings
    E2537-08 Guide for Application of Continuous Quality Verification to Pharmaceutical and Biopharmaceutical Manufacturing
    E2548-07 Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
    E2549-09 Practice for Validation of Seized-Drug Analytical Methods
    E2550-11 Test Method for Thermal Stability by Thermogravimetry
    E2551-07 Test Method for Humidity Calibration (or Conformation) of Humidity Generators for Use with Thermogravimetric Analyzers
    E2554-07 Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method in a Single Laboratory Using a Control Sample Program
    E2555-07 Practice for Factors and Procedures for Applying the MIL-STD-105 Plans in Life and Reliability Inspection
    E2578-07 Practice for Calculation of Mean Sizes/Diameters and Standard Deviations of Particle Size Distributions
    E2584-10 Practice for Thermal Conductivity of Materials Using a Thermal Capacitance (Slug) Calorimeter
    E2585-09 Practice for Thermal Diffusivity by the Flash Method
    E2586-10A Practice for Calculating and Using Basic Statistics
    E2587-10 Practice for Use of Control Charts in Statistical Process Control
    E2589-09A Terminology Relating to Nonsieving Methods of Powder Characterization
    E2602-09 Test Method for the Assignment of the Glass Transition Temperature by Modulated Temperature Differential Scanning Calorimetry
    E2603-08 Practice for Calibration of Fixed-Cell Differential Scanning Calorimeters
    E2651-10 Guide for Powder Particle Size Analysis
    E2655-08 Guide for Reporting Uncertainty of Test Results and Use of the Term Measurement Uncertainty in ASTM Test Methods
    E2656-10 Practice for Real-time Release Testing of Pharmaceutical Water for the Total Organic Carbon Attribute
    E2659-09E01 Practice for Certificate Programs
    E2678-09 Guide for Education and Training in Computer Forensics
    E2696-09 Practice for Life and Reliability Testing Based on the Exponential Distribution
    E2708-10 Terminology for Personnel Credentialing
    E2709-10 Practice for Demonstrating Capability to Comply with a Lot Acceptance Procedure
    E2710-11 Guide for Preservation of Charred Documents
    E2716-09 Test Method for Determining Specific Heat Capacity by Sinusoidal Modulated Temperature Differential Scanning Calorimetry
    E2744-10 Test Method for Pressure Calibration of Thermal Analyzers
    E2762-10 Practice for Sampling a Stream of Product by Variables Indexed by AQL
    E2763-10 Practice for Computer Forensics
    E2765-11 Practice for Use of Image Capture and Storage Technology in Forensic Document Examination
    E2781-11 Practice for Evaluation of Methods for Determination of Kinetic Parameters by Thermal Analysis
    E2782-10 Guide for Measurement Systems Analysis (MSA)

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 223
       Pages: 1496

    - 2010
       Standards: 210
       Pages: 1146