ASTM Volume 13.01, September 2011
Medical and Surgical Materials and Devices
Return to Previous Page
Table of Contents
E0667-98R09 Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
E0825-98R09 Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
E1061-01R07 Specification for Direct-Reading Liquid Crystal Forehead Thermometers
E1104-98R09 Specification for Clinical Thermometer Probe Covers and Sheaths
E1112-00R06 Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
E1202-87R08 Guide for Development of Micronucleus Assay Standards
E1262-88R08 Guide for Performance of Chinese Hamster Ovary Cell/Hypoxanthine Guanine Phosphoribosyl Transferase Gene Mutation Assay
E1263-97R08 Guide for Conduct of Micronucleus Assays in Mammalian Bone Marrow Erythrocytes
E1280-97R08 Guide for Performing the Mouse Lymphoma Assay for Mammalian Cell Mutagenicity
E1299-96R10 Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
E1397-91R08 Practice for Rat Hepatocyte DNA Repair Assay
E1398-91R08 Practice for Rat Hepatocyte DNA Repair Assay
E1965-98R09 Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
F0067-06 Specification for Unalloyed Titanium, for Surgical Implant Applications (UNS R50250, UNS R50400, UNS R50550, UNS R50700)
F0075-07 Specification for Cobalt-28 Chromium-6 Molybdenum Alloy Castings and Casting Alloy for Surgical Implants (UNS R30075)
F0086-04R09 Practice for Surface Preparation and Marking of Metallic Surgical Implants
F0090-09 Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy for Surgical Implant Applications (UNS R30605)
F0116-00R09 Specification for Medical Screwdriver Bits
F0136-08E01 Specification for Wrought Titanium-6Aluminum-4Vanadium ELI (Extra Low Interstitial) Alloy for Surgical Implant Applications (UNS R56401)
F0138-08 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Bar and Wire for Surgical Implants (UNS S31673)
F0139-08 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Sheet and Strip for Surgical Implants (UNS S31673)
F0366-10 Specification for Fixation Pins and Wires
F0382-99R08E01 Specification and Test Method for Metallic Bone Plates
F0384-06E01 Specifications and Test Methods for Metallic Angled Orthopedic Fracture Fixation Devices
F0451-08 Specification for Acrylic Bone Cement
F0452-76R08 Specification for Preformed Cranioplasty Plates
F0543-07E01 Specification and Test Methods for Metallic Medical Bone Screws
F0560-08 Specification for Unalloyed Tantalum for Surgical Implant Applications (UNS R05200, UNS R05400)
F0561-05AR10 Practice for Retrieval and Analysis of Medical Devices, and Associated Tissues and Fluids
F0562-07 Specification for Wrought 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy for Surgical Implant Applications (UNS R30035)
F0564-10 Specification and Test Methods for Metallic Bone Staples
F0565-04R09E01 Practice for Care and Handling of Orthopedic Implants and Instruments
F0601-03R08 Practice for Fluorescent Penetrant Inspection of Metallic Surgical Implants
F0602-09 Criteria for Implantable Thermoset Epoxy Plastics
F0619-03R08 Practice for Extraction of Medical Plastics
F0620-06 Specification for Alpha Plus Beta Titanium Alloy Forgings for Surgical Implants
F0621-08 Specification for Stainless Steel Forgings for Surgical Implants
F0623-99R06 Performance Specification for Foley Catheter
F0624-09 Guide for Evaluation of Thermoplastic Polyurethane Solids and Solutions for Biomedical Applications
F0629-02R07E01 Practice for Radiography of Cast Metallic Surgical Implants
F0639-09 Specification for Polyethylene Plastics for Medical Applications
F0640-07 Test Methods for Determining Radiopacity for Medical Use
F0641-09 Specification for Implantable Epoxy Electronic Encapsulants
F0647-94R06 Practice for Evaluating and Specifying Implantable Shunt Assemblies for Neurosurgical Application
F0648-10A Specification for Ultra-High-Molecular-Weight Polyethylene Powder and Fabricated Form for Surgical Implants
F0665-09 Classification for Vinyl Chloride Plastics Used in Biomedical Application
F0688-10 Specification for Wrought Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Plate, Sheet, and Foil for Surgical Implants (UNS R30035)
F0700-93R08 Practice for Care and Handling of Intracranial Aneurysm Clips and Instruments
F0701-81R08 Practice for Care and Handling of Neurosurgical Implants and Instruments
F0702-10 Specification for Polysulfone Resin for Medical Applications
F0703-07 Specification for Implantable Breast Prostheses
F0719-81R07E01 Practice for Testing Biomaterials in Rabbits for Primary Skin Irritation
F0720-81R07E01 Practice for Testing Guinea Pigs for Contact Allergens: Guinea Pig Maximization Test
F0732-00R06 Test Method for Wear Testing of Polymeric Materials Used in Total Joint Prostheses
F0745-07 Specification for 18Chromium-12.5Nickel-2.5Molybdenum Stainless Steel for Cast and Solution-Annealed Surgical Implant Applications
F0746-04R09E01 Test Method for Pitting or Crevice Corrosion of Metallic Surgical Implant Materials
F0748-06R10 Practice for Selecting Generic Biological Test Methods for Materials and Devices
F0749-98R07E01 Practice for Evaluating Material Extracts by Intracutaneous Injection in the Rabbit
F0750-87R07E01 Practice for Evaluating Material Extracts by Systemic Injection in the Mouse
F0754-08 Specification for Implantable Polytetrafluoroethylene (PTFE) Sheet, Tube, and Rod Shapes Fabricated from Granular Molding Powders
F0755-99R05 Specification for Selection of Porous Polyethylene for Use in Surgical Implants
F0756-08 Practice for Assessment of Hemolytic Properties of Materials
F0763-04R10 Practice for Short-Term Screening of Implant Materials
F0799-11 Specification for Cobalt-28Chromium-6Molybdenum Alloy Forgings for Surgical Implants (UNS R31537, R31538, R31539)
F0813-07 Practice for Direct Contact Cell Culture Evaluation of Materials for Medical Devices
F0881-94R06 Specification for Silicone Elastomer Facial Implants
F0882-84R02 Performance and Safety Specification for Cryosurgical Medical Instruments
F0895-84R06 Test Method for Agar Diffusion Cell Culture Screening for Cytotoxicity
F0897-02R07 Test Method for Measuring Fretting Corrosion of Osteosynthesis Plates and Screws
F0899-11 Specification for Wrought Stainless Steels for Surgical Instruments
F0921-10 Terminology Relating to Hemostatic Forceps
F0961-08 Specification for 35Cobalt-35Nickel-20Chromium-10Molybdenum Alloy Forgings for Surgical Implants (UNS R30035)
F0981-04R10 Practice for Assessment of Compatibility of Biomaterials for Surgical Implants with Respect to Effect of Materials on Muscle and Bone
F0982-86R08 Specification for Disclosure of Characteristics of Surgically Implanted Clamps for Carotid Occlusion
F0983-86R09 Practice for Permanent Marking of Orthopaedic Implant Components
F0997-10 Specification for Polycarbonate Resin for Medical Applications
F1026-86R08E01 Specification for General Workmanship and Performance Measurements of Hemostatic Forceps
F1027-86R07 Practice for Assessment of Tissue and Cell Compatibility of Orofacial Prosthetic Materials and Devices
F1044-05 Test Method for Shear Testing of Calcium Phosphate Coatings and Metallic Coatings
F1058-08 Specification for Wrought 40Cobalt-20Chromium-16Iron-15Nickel-7Molybdenum Alloy Wire and Strip for Surgical Implant Applications (UNS R30003 and UNS R30008)
F1078-10 Terminology for Surgical Scissors\MInserted and Non-Inserted Blades
F1079-87R08E01 Specification for Inserted and Noninserted Surgical Scissors
F1088-04AR10 Specification for Beta-Tricalcium Phosphate for Surgical Implantation
F1089-10 Test Method for Corrosion of Surgical Instruments
F1091-08 Specification for Wrought Cobalt-20Chromium-15Tungsten-10Nickel Alloy Surgical Fixation Wire (UNS R30605)
F1108-04R09 Specification for Titanium-6Aluminum-4Vanadium Alloy Castings for Surgical Implants (UNS R56406)
F1147-05 Test Method for Tension Testing of Calcium Phosphate and Metallic Coatings
F1160-05 Test Method for Shear and Bending Fatigue Testing of Calcium Phosphate and Metallic Medical and Composite Calcium Phosphate/Metallic Coatings
F1185-03R09 Specification for Composition of Hydroxylapatite for Surgical Implants
F1223-08 Test Method for Determination of Total Knee Replacement Constraint
F1251-89R03 Terminology Relating to Polymeric Biomaterials in Medical and Surgical Devices
F1264-03R07E02 Specification and Test Methods for Intramedullary Fixation Devices
F1266-89R08 Performance Specification for Cerebral Stereotactic Instruments
F1295-05 Specification for Wrought Titanium-6Aluminum-7Niobium Alloy for Surgical Implant Applications (UNS R56700)
F1314-07 Specification for Wrought Nitrogen Strengthened 22 Chromium \N 13 Nickel \N 5 Manganese \N 2.5 Molybdenum Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S20910)
F1325-91R08E01 Specification for Stainless Steel Suture Needle Holders-General Workmanship Requirements and Corresponding Test Methods
F1350-08 Specification for Wrought 18Chromium-14Nickel-2.5Molybdenum Stainless Steel Surgical Fixation Wire (UNS S31673)
F1357-09 Specification for Articulating Total Wrist Implants
F1377-08 Specification for Cobalt-28Chromium-6Molybdenum Powder for Coating of Orthopedic Implants (UNS R30075)
F1378-05R10 Specification for Shoulder Prostheses
F1408-97R08 Practice for Subcutaneous Screening Test for Implant Materials
F1439-03R08 Guide for Performance of Lifetime Bioassay for the Tumorigenic Potential of Implant Materials
F1440-92R08 Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components Without Torsion
F1441-03R09 Specification for Soft-Tissue Expander Devices
F1472-08E01 Specification for Wrought Titanium-6Aluminum-4Vanadium Alloy for Surgical Implant Applications (UNS R56400)
F1536-95R10 Test Method for Determining Strength and Setting Time of Synthetic Water-Activated Polyurethane Fiberglass Orthopaedic Casting Tape
F1537-08 Specification for Wrought Cobalt-28Chromium-6Molybdenum Alloys for Surgical Implants (UNS R31537, UNS R31538, and UNS R31539)
F1538-03R09 Specification for Glass and Glass Ceramic Biomaterials for Implantation
F1541-02R07E01 Specification and Test Methods for External Skeletal Fixation Devices
F1580-07 Specification for Titanium and Titanium-6 Aluminum-4 Vanadium Alloy Powders for Coatings of Surgical Implants
F1581-08E01 Specification for Composition of Anorganic Bone for Surgical Implants
F1582-98R03 Terminology Relating to Spinal Implants
F1586-08 Specification for Wrought Nitrogen Strengthened 21Chromium\M10Nickel\M3Manganese\M2.5Molybdenum Stainless Steel Alloy Bar for Surgical Implants (UNS S31675)
F1609-08 Specification for Calcium Phosphate Coatings for Implantable Materials
F1611-00R09 Specification for Intramedullary Reamers
F1612-95R05 Practice for Cyclic Fatigue Testing of Metallic Stemmed Hip Arthroplasty Femoral Components with Torsion
F1613-95R08E01 Specification for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb Type)
F1634-95R08 Practice for Environmental Conditioning of Polymer Matrix Composite Materials and Implant Devices
F1635-11 Test Method for Degradation Testing of Hydrolytically Degradable Polymer Resins and Fabricated Forms for Surgical Implants
F1638-95R08E01 Terminology for Surgical Tissue/Dressing/Pick-Up Forceps (Thumb-Type)
F1672-95R11 Specification for Resurfacing Patellar Prosthesis
F1713-08 Specification for Wrought Titanium-13Niobium-13Zirconium Alloy for Surgical Implant Applications (UNS R58130)
F1714-96R08 Guide for Gravimetric Wear Assessment of Prosthetic Hip Designs in Simulator Devices
F1717-11 Test Methods for Spinal Implant Constructs in a Vertebrectomy Model
F1719-96R08 Specification for Image-Interactive Stereotactic and Localization Systems
F1744-96R08E01 Guide for Care and Handling of Stainless Steel Surgical Instruments
F1781-03R09 Specification for Elastomeric Flexible Hinge Finger Total Joint Implants
F1798-97R08 Guide for Evaluating the Static and Fatigue Properties of Interconnection Mechanisms and Subassemblies Used in Spinal Arthrodesis Implants
F1800-07 Test Method for Cyclic Fatigue Testing of Metal Tibial Tray Components of Total Knee Joint Replacements
F1801-97R09E01 Practice for Corrosion Fatigue Testing of Metallic Implant Materials
F1813-06 Specification for Wrought Titanium\N12 Molybdenum\N6 Zirconium\N2 Iron Alloy for Surgical Implant (UNS R58120)
F1814-97AR09 Guide for Evaluating Modular Hip and Knee Joint Components
F1820-97R09 Test Method for Determining the Axial Disassembly Force of a Modular Acetabular Device
F1828-97R06 Specification for Ureteral Stents
F1829-98R09 Test Method for Static Evaluation of Glenoid Locking Mechanism in Shear
F1830-97R05 Practice for Selection of Blood for Evaluation of Blood Pumps
F1831-97R06 Specification for Cranial Traction Tongs and Halo External Spinal Immobilization Devices
F1839-08E01 Specification for Rigid Polyurethane Foam for Use as a Standard Material for Testing Orthopaedic Devices and Instruments
F1840-10E01 Terminology for Surgical Suture Needles
F1841-97R05 Practice for Assessment of Hemolysis in Continuous Flow Blood Pumps
F1854-09 Test Method for Stereological Evaluation of Porous Coatings on Medical Implants
F1855-00R05 Specification for Polyoxymethylene (Acetal) for Medical Applications
F1874-98R04 Test Method for Bend Testing of Needles Used in Surgical Sutures
F1875-98R09 Practice for Fretting Corrosion Testing of Modular Implant Interfaces: Hip Femoral Head-Bore and Cone Taper Interface
F1876-98R03E01 Specification for Polyetherketoneetherketoneketone (PEKEKK) Resins for Surgical Implant Applications
F1877-05R10 Practice for Characterization of Particles
F1903-10 Practice for Testing For Biological Responses to Particles
F1904-98R08 Practice for Testing the Biological Responses to Particles
F1925-09 Specification for Semi-Crystalline Poly(lactide) Polymer and Copolymer Resins for Surgical Implants
F1926_F1926M-10 Test Method for Evaluation of the Environmental Stability of Calcium Phosphate Granules, Fabricated Forms, and Coatings
F1978-00R07E02 Test Method for Measuring Abrasion Resistance of Metallic Thermal Spray Coatings by Using the Taber Abraser
F1983-99R08 Practice for Assessment of Compatibility of Absorbable/Resorbable Biomaterials for Implant Applications
F1984-99R08 Practice for Testing for Whole Complement Activation in Serum by Solid Materials
F1992-99R07 Practice for Reprocessing of Reusable, Heat-Stable Endoscopic Accessory Instruments (EAI) Used with Flexible Endoscopes
F2003-02R08 Practice for Accelerated Aging of Ultra-High Molecular Weight Polyethylene after Gamma Irradiation in Air
F2004-05R10 Test Method for Transformation Temperature of Nickel-Titanium Alloys by Thermal Analysis
F2005-05R10 Terminology for Nickel-Titanium Shape Memory Alloys
F2009-00R11 Test Method for Determining the Axial Disassembly Force of Taper Connections of Modular Prostheses
F2024-10 Practice for X-ray Diffraction Determination of Phase Content of Plasma-Sprayed Hydroxyapatite Coatings
F2025-06 Practice for Gravimetric Measurement of Polymeric Components for Wear Assessment
F2026-10 Specification for Polyetheretherketone (PEEK) Polymers for Surgical Implant Applications
F2027-08 Guide for Characterization and Testing of Raw or Starting Biomaterials for Tissue-Engineered Medical Products
F2028-08 Test Methods for Dynamic Evaluation of Glenoid Loosening or Disassociation
F2033-05 Specification for Total Hip Joint Prosthesis and Hip Endoprosthesis Bearing Surfaces Made of Metallic, Ceramic, and Polymeric Materials
F2038-00R05 Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part I\MFormulations and Uncured Materials
F2042-00R05 Guide for Silicone Elastomers, Gels, and Foams Used in Medical Applications Part II\MCrosslinking and Fabrication
F2051-00R06 Specification for Implantable Saline Filled Breast Prosthesis
F2052-06E01 Test Method for Measurement of Magnetically Induced Displacement Force on Medical Devices in the Magnetic Resonance Environment
F2062-00R06 Specification for Square Drive Interconnections on Surgical Instruments
F2063-05 Specification for Wrought Nickel-Titanium Shape Memory Alloys for Medical Devices and Surgical Implants
F2064-00R06E01 Guide for Characterization and Testing of Alginates as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Products Application
F2065-00R10 Practice for Testing for Alternative Pathway Complement Activation in Serum by Solid Materials
F2066-08 Specification for Wrought Titanium-15 Molybdenum Alloy for Surgical Implant Applications (UNS R58150)
F2068-09 Specification for Femoral Prostheses\MMetallic Implants
F2077-03 Test Methods For Intervertebral Body Fusion Devices
F2079-09 Test Method for Measuring Intrinsic Elastic Recoil of Balloon-Expandable Stents
F2081-06 Guide for Characterization and Presentation of the Dimensional Attributes of Vascular Stents
F2082-06 Test Method for Determination of Transformation Temperature of Nickel-Titanium Shape Memory Alloys by Bend and Free Recovery
F2083-10 Specification for Total Knee Prosthesis
F2091-01R06 Specification for Acetabular Prostheses
F2102-06E01 Guide for Evaluating the Extent of Oxidation in Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants
F2103-11 Guide for Characterization and Testing of Chitosan Salts as Starting Materials Intended for Use in Biomedical and Tissue-Engineered Medical Product Applications
F2118-10 Test Method for Constant Amplitude of Force Controlled Fatigue Testing of Acrylic Bone Cement Materials
F2119-07 Test Method for Evaluation of MR Image Artifacts from Passive Implants
F2129-08 Test Method for Conducting Cyclic Potentiodynamic Polarization Measurements to Determine the Corrosion Susceptibility of Small Implant Devices
F2131-02R07E01 Test Method for Biological Activity of Recombinant Human Bone Morphogenetic Protein-2 (rhBMP-2) Using the W-20 Mouse Stromal Cell Line
F2132-01R08E01 Specification for Puncture Resistance of Materials Used in Containers for Discarded Medical Needles and Other Sharps
F2146-07 Specification for Wrought Titanium-3Aluminum-2.5Vanadium Alloy Seamless Tubing for Surgical Implant Applications (UNS R56320)
F2147-01R10 Practice for Guinea Pig: Split Adjuvant and Closed Patch Testing for Contact Allergens
F2148-07E01 Practice for Evaluation of Delayed Contact Hypersensitivity Using the Murine Local Lymph Node Assay (LLNA)
F2149-01R07 Test Method for Automated Analyses of Cells\Mthe Electrical Sensing Zone Method of Enumerating and Sizing Single Cell Suspensions
F2150-07 Guide for Characterization and Testing of Biomaterial Scaffolds Used in Tissue-Engineered Medical Products
F2180-02R07E02 Specification for Metallic Implantable Strands and Cables
F2181-09 Specification for Wrought Seamless Stainless Steel Tubing for Surgical Implants
F2182-11 Test Method for Measurement of Radio Frequency Induced Heating On or Near Passive Implants During Magnetic Resonance Imaging
F2183-02R08 Test Method for Small Punch Testing of Ultra-High Molecular Weight Polyethylene Used in Surgical Implants
F2193-02R07 Specifications and Test Methods for Components Used in the Surgical Fixation of the Spinal Skeletal System
F2210-02R10 Guide for Processing Cells, Tissues, and Organs for Use in Tissue Engineered Medical Products
F2211-04 Classification for Tissue Engineered Medical Products (TEMPs)
F2212-11 Guide for Characterization of Type I Collagen as Starting Material for Surgical Implants and Substrates for Tissue Engineered Medical Products (TEMPs)
F2213-06 Test Method for Measurement of Magnetically Induced Torque on Medical Devices in the Magnetic Resonance Environment
F2214-02R08 Test Method for Determination of Network Parameters of Crosslinked Ultra High Molecular Weight Polyethylene (UHMWPE)
F2224-09 Specification for High Purity Calcium Sulfate Hemihydrate or Dihydrate for Surgical Implants
F2229-07 Specification for Wrought, Nitrogen Strengthened 23Manganese-21Chromium-1Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29108)
F2255-05R10 Test Method for Strength Properties of Tissue Adhesives in Lap-Shear by Tension Loading
F2256-05R10 Test Method for Strength Properties of Tissue Adhesives in T-Peel by Tension Loading
F2257-09 Specification for Wrought Seamless or Welded and Drawn 18 Chromium-14Nickel-2.5Molybdenum Stainless Steel Small Diameter Tubing for Surgical Implants (UNS S31673)
F2258-05R10 Test Method for Strength Properties of Tissue Adhesives in Tension
F2259-10 Test Method for Determining the Chemical Composition and Sequence in Alginate by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
F2260-03R08 Test Method for Determining Degree of Deacetylation in Chitosan Salts by Proton Nuclear Magnetic Resonance (1H NMR) Spectroscopy
F2267-04 Test Method for Measuring Load Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
F2311-08 Guide for Classification of Therapeutic Skin Substitutes
F2312-11 Terminology Relating to Tissue Engineered Medical Products
F2313-10 Specification for Poly(glycolide) and Poly(glycolide-co-lactide) Resins for Surgical Implants with Mole Fractions Greater Than or Equal to 70 \% Glycolide
F2315-11 Guide for Immobilization or Encapsulation of Living Cells or Tissue in Alginate Gels
F2345-03R08 Test Methods for Determination of Static and Cyclic Fatigue Strength of Ceramic Modular Femoral Heads
F2346-05 Test Methods for Static and Dynamic Characterization of Spinal Artificial Discs
F2347-11 Guide for Characterization and Testing of Hyaluronan as Starting Materials Intended for Use in Biomedical and Tissue Engineered Medical Product Applications
F2381-10 Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High Molecular Weight Polyethylene Fabricated Forms Intended for Surgical Implants by Infrared Spectroscopy
F2382-04R10 Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)
F2383-11 Guide for Assessment of Adventitious Agents in Tissue Engineered Medical Products (TEMPs)
F2384-10 Specification for Wrought Zirconium-2.5Niobium Alloy for Surgical Implant Applications (UNS R60901)
F2385-04R10 Test Method for Determining Femoral Head Penetration into Acetabular Components of Total Hip Replacement Using Clinical Radiographs
F2386-04 Guide for Preservation of Tissue Engineered Medical Products (TEMPs)
F2392-04R10 Test Method for Burst Strength of Surgical Sealants
F2393-10 Specification for High-Purity Dense Magnesia Partially Stabilized Zirconia (Mg-PSZ) for Surgical Implant Applications
F2394-07 Guide for Measuring Securement of Balloon Expandable Vascular Stent Mounted on Delivery System
F2423-05 Guide for Functional, Kinematic, and Wear Assessment of Total Disc Prostheses
F2450-10 Guide for Assessing Microstructure of Polymeric Scaffolds for Use in Tissue-Engineered Medical Products
F2451-05R10 Guide for Assessment of Implantable Devices Intended to Repair or Regenerate Articular Cartilage
F2458-05R10 Test Method for Wound Closure Strength of Tissue Adhesives and Sealants
F2459-05 Test Method for Extracting Residue from Metallic Medical Components and Quantifying via Gravimetric Analysis
F2477-07 Test Methods for Pulsatile Durability Testing of Vascular Stents
F2502-05R09E01 Specification and Test Methods for Bioabsorbable Plates and Screws for Internal Fixation Implants
F2503-08 Practice for Marking Medical Devices and Other Items for Safety in the Magnetic Resonance Environment
F2504-05 Practice for Describing System Output of Implantable Middle Ear Hearing Devices
F2514-08 Guide for Finite Element Analysis (FEA) of Metallic Vascular Stents Subjected to Uniform Radial Loading
F2516-07E02 Test Method for Tension Testing of Nickel-Titanium Superelastic Materials
F2527-10 Specification for Wrought Seamless and Welded and Drawn Cobalt Alloy Small Diameter Tubing for Surgical Implants (UNS R30003, UNS R30008, UNS R30035, UNS R30605, and UNS R31537)
F2528-06 Test Methods for Enteral Feeding Devices with a Retention Balloon
F2537-06 Practice for Calibration of Linear Displacement Sensor Systems Used to Measure Micromotion
F2554-10 Practice for Measurement of Positional Accuracy of Computer Assisted Surgical Systems
F2565-06 Guide for Extensively Irradiation-Crosslinked Ultra-High Molecular Weight Polyethylene Fabricated Forms for Surgical Implant Applications
F2567-06R10 Practice for Testing for Classical Pathway Complement Activation in Serum by Solid Materials
F2579-10 Specification for Amorphous Poly(lactide) and Poly(lactide-co-glycolide) Resins for Surgical Implants
F2580-09 Test Method for Evaluation of Modular Connection of Proximally Fixed Femoral Hip Prosthesis
F2581-07 Specification for Wrought Nitrogen Strengthened 11Manganese-17Chromium-3Molybdenum Low-Nickel Stainless Steel Alloy Bar and Wire for Surgical Implants (UNS S29225)
F2582-08 Test Method for Impingement of Acetabular Prostheses
F2602-08E01 Test Method for Determining the Molar Mass of Chitosan and Chitosan Salts by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
F2603-06 Guide for Interpreting Images of Polymeric Tissue Scaffolds
F2605-08E01 Test Method for Determining the Molar Mass of Sodium Alginate by Size Exclusion Chromatography with Multi-angle Light Scattering Detection (SEC-MALS)
F2606-08 Guide for Three-Point Bending of Balloon Expandable Vascular Stents and Stent Systems
F2624-07 Test Method for Static, Dynamic, and Wear Assessment of Extra-Discal Spinal Motion Preserving Implants
F2625-10 Test Method for Measurement of Enthalpy of Fusion, Percent Crystallinity, and Melting Point of Ultra-High-Molecular Weight Polyethylene by Means of Differential Scanning Calorimetry
F2633-07 Specification for Wrought Seamless Nickel-Titanium Shape Memory Alloy Tube for Medical Devices and Surgical Implants
F2664-11 Guide for Assessing the Attachment of Cells to Biomaterial Surfaces by Physical Methods
F2665-09 Specification for Total Ankle Replacement Prosthesis
F2694-07 Practice for Functional and Wear Evaluation of Motion-Preserving Lumbar Total Facet Prostheses
F2695-07 Specification for Ultra-High Molecular Weight Polyethylene Powder Blended With Alpha-Tocopherol (Vitamin E) and Fabricated Forms for Surgical Implant Applications
F2706-08 Test Methods for Occipital-Cervical and Occipital-Cervical-Thoracic Spinal Implant Constructs in a Vertebrectomy Model
F2721-09 Guide for Pre-clinical Evaluation in Critical Size Segmental Bone Defects
F2722-08 Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate Rotational Stops
F2723-08 Test Method for Evaluating Mobile Bearing Knee Tibial Baseplate/Bearing Resistance to Dynamic Disassociation
F2724-08 Test Method for Evaluating Mobile Bearing Knee Dislocation
F2739-08 Guide for Quantitating Cell Viability Within Biomaterial Scaffolds
F2754_F2754M-09 Test Method for Measurement of Camber, Cast, Helix and Direction of Helix of Coiled Wire
F2759-11 Guide for Assessment of the Ultra High Molecular Weight Polyethylene (UHMWPE) Used in Orthopedic and Spinal Devices
F2777-10 Test Method for Evaluating Knee Bearing (Tibial Insert) Endurance and Deformation Under High Flexion
F2778-09 Test Method for Measurement of Percent Crystallinity of Polyetheretherketone (PEEK) Polymers by Means of Specular Reflectance Fourier Transform Infrared Spectroscopy (R-FTIR)
F2789-10 Guide for Mechanical and Functional Characterization of Nucleus Devices
F2790-10 Practice for Static and Dynamic Characterization of Motion Preserving Lumbar Total Facet Prostheses
F2791-09 Guide for Assessment of Surface Texture of Non-Porous Biomaterials in Two Dimensions
F2808-10 Test Method for Performing Behind-the-Knee (BTK) Test for Evaluating Skin Irritation Response to Products and Materials That Come Into Repeated or Extended Contact with Skin
F2809-10 Terminology Relating to Medical and Surgical Materials and Devices
F2819-10 Test Methods for Measurement of Straightness of Bar, Rod, Tubing and Wire to be used for Medical Devices
F2847-10 Practice for Reporting and Assessment of Residues on Single Use Implants
F2848-10 Specification for Medical-Grade Ultra-High Molecular Weight Polyethylene Yarns
F2885-11 Specification for Metal Injection Molded Titanium-6Aluminum-4Vanadium Components for Surgical Implant Applications
F2886-10 Specification for Metal Injection Molded Cobalt-28Chromium-6Molybdenum Components for Surgical Implant Applications
F2895-10 Practice for Digital Radiography of Cast Metallic Implants
F2900-11 Guide for Characterization of Hydrogels used in Regenerative Medicine
F2903-11 Guide for Tissue Engineered Medical Products (TEMPs) for Reinforcement of Tendon and Ligament Surgical Repair