ASTM Volume 08.04, January 2011

    Plastic Piping Systems

    Table of Contents

    D1527-99R05 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
    D1598-02R09 Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
    D1599-99R05 Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
    D1785-06 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
    D2122-98R10 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
    D2152-95R10 Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
    D2235-04 Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
    D2239-03 Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
    D2241-09 Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
    D2290-08 Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
    D2321-09 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
    D2412-10 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
    D2444-99R10 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
    D2464-06 Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
    D2466-06 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
    D2467-06 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
    D2513-09A Specification for Polyethylene (PE) Gas Pressure Pipe, Tubing, and Fittings
    D2564-04R09E01 Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
    D2609-02R08 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
    D2657-07 Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
    D2661-08 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
    D2665-09 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
    D2672-96AR09 Specification for Joints for IPS PVC Pipe Using Solvent Cement
    D2680-01R09 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
    D2683-10 Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
    D2729-03 Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    D2737-03 Specification for Polyethylene (PE) Plastic Tubing
    D2749-02R08 Symbols for Dimensions of Plastic Pipe Fittings
    D2751-05 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
    D2774-08 Practice for Underground Installation of Thermoplastic Pressure Piping
    D2837-08 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
    D2846_D2846M-09B Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
    D2852-95R08 Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
    D2855-96R10 Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
    D2949-01AR08E01 Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
    D3034-08 Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
    D3035-08 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
    D3122-95R09 Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
    D3138-04 Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
    D3139-98R05 Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
    D3212-07 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
    D3261-10A Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
    D3311-09A Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
    D3485-02 Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
    D6070-02R10 Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
    F0402-05 Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
    F0405-05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings
    F0409-02R08 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
    F0412-09 Terminology Relating to Plastic Piping Systems
    F0437-09 Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    F0438-09 Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
    F0439-09 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
    F0441_F0441M-09 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
    F0442_F0442M-09 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR\NPR)
    F0449-02R08 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
    F0477-10 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    F0480-06BE01 Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
    F0481-97R08 Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
    F0493-10 Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
    F0512-06 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
    F0585-94R07 Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
    F0610_F0610M-10 Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
    F0628-08 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
    F0645-04 Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
    F0656-10 Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
    F0667-06 Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
    F0679-08 Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
    F0689-97R04 Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
    F0690-86R03E02 Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
    F0714-08 Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
    F0725-03R08E01 Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
    F0758-95R07E01 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
    F0771-99R05 Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
    F0794-03R09 Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
    F0810-07 Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
    F0876-10 Specification for Crosslinked Polyethylene (PEX) Tubing
    F0877-07 Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
    F0891-10 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
    F0894-07 Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
    F0905-04 Practice for Qualification of Polyethylene Saddle-Fused Joints
    F0913-02R08 Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
    F0948-94R06 Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
    F0949-10 Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
    F1025-94R06 Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
    F1041-02R08 Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
    F1055-98R06 Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
    F1056-04 Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
    F1057-10 Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
    F1216-09 Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
    F1281-07 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
    F1282-10 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
    F1290-98AR04 Practice for Electrofusion Joining Polyolefin Pipe and Fittings
    F1335-04 Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
    F1336-07 Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
    F1365-91R09 Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
    F1412-09 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
    F1417-92R05 Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
    F1429-99R09 Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
    F1473-07 Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
    F1483-05 Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
    F1488-09 Specification for Coextruded Composite Pipe
    F1498-08 Specification for Taper Pipe Threads 60|SD for Thermoplastic Pipe and Fittings
    F1499-01R08 Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
    F1504-02 Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
    F1533-01R09 Specification for Deformed Polyethylene (PE) Liner
    F1545-97R09 Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
    F1563-01R07 Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
    F1588-96R07 Test Method for Constant Tensile Load Joint Test (CTLJT)
    F1606-05 Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
    F1668-08 Guide for Construction Procedures for Buried Plastic Pipe
    F1673-10 Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
    F1674-05 Test Method for Joint Restraint Products for Use with PVC Pipe
    F1675-09 Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
    F1697-09 Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
    F1698-02R08 Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
    F1732-96R05 Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
    F1733-07 Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
    F1734-03R09 Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
    F1735-09 Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
    F1741-08 Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
    F1743-08 Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
    F1759-97R10 Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
    F1760-01R05E01 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
    F1802-04R10 Test Method for Performance Testing of Excess Flow Valves
    F1803-06 Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
    F1804-08 Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation
    F1807-10E01 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    F1865-09 Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
    F1866-07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
    F1867-06 Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
    F1871-02E01 Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
    F1901-10 Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
    F1924-05 Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
    F1947-04 Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
    F1948-05 Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
    F1960-10 Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
    F1961-09 Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
    F1962-05E01 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
    F1970-05 Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
    F1973-08 Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) and Polyamide 12 (PA12) Fuel Gas Distribution Systems
    F1974-09 Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
    F1986-01R06 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
    F1987-01R06 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
    F2018-00R10 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
    F2019-03R09 Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
    F2021-06 Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
    F2023-10 Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
    F2080-09 Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
    F2098-08 Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert and Plastic Insert Fittings
    F2135-01R07 Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
    F2136-08 Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
    F2138-09 Specification for Excess Flow Valves for Natural Gas Service
    F2145-09 Specification for Polyamide 11 (PA 11) and Polyamide 12 (PA12) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 and Polyamide 12 Pipe and Tubing
    F2158-08 Specification for Residential Central-Vacuum Tube and Fittings
    F2159-10 Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Polyethylene of Raised Temperature (PE-RT) Tubing
    F2160-10 Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
    F2164-02R07 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
    F2165-02R08 Specification for Flexible Pre-Insulated Piping
    F2176-02R09 Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
    F2206-02R10 Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
    F2207-06 Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
    F2231-02R08 Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
    F2261-06 Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type.
    F2262-09 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
    F2263-07E01 Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
    F2306_F2306M-08 Specification for 12 to 60 in. \[300 to 1500 mm\] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
    F2307-03 Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
    F2331-04E01 Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
    F2389-10 Specification for Pressure-rated Polypropylene (PP) Piping Systems
    F2390-07 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
    F2418-09A Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
    F2433-05R09 Test Method for Determining Thermoplastic Pipe Wall Stiffness
    F2434-09 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
    F2435-07 Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
    F2487-06 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
    F2509-06 Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
    F2510_F2510M-07 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
    F2536-06B Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
    F2561-06 Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
    F2562_F2562M-08 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
    F2599-06 Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
    F2600-09 Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
    F2618-09 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Pipe and Fittings for Chemical Waste Drainage Systems
    F2619_F2619M-07 Specification for High-Density Polyethylene (PE) Line Pipe
    F2620-09E01 Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
    F2623-08 Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
    F2634-07 Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
    F2648_F2648M-07 Specification for 2 to 60 inch \[50 to 1500 mm\] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
    F2649-08A Specification for Corrugated High Density Polyethylene (HDPE) Grease Interceptor Tanks
    F2657-07 Test Method for Outdoor Weathering Exposure of Crosslinked Polyethylene (PEX) Tubing
    F2658-07 Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
    F2686-10 Specification for Glass Fiber Reinforced Thermoplastic Pipe
    F2718-09 Specification for Polyethylene (PE) and Cement Materials for an Encapsulated Cement Mortar Formed in Place Liner System (FIPLS) for the Rehabilitation of Water Pipelines
    F2719-09 Practice for Installation of Polyethylene (PE) and Encapsulated Cement Mortar Formed in Place Lining System (FIPLS) for the Rehabilitation of Water Pipelines
    F2720_F2720M-09 Specification for Glass Fiber Reinforced Polyethylene (PE-GF) Spiral Wound Large Diameter Pipe
    F2735-09 Specification for Plastic Insert Fittings For SDR9 Cross-linked Polyethylene (PEX) and Polyethylene of Raised Temperature (PE-RT) Tubing
    F2736-10 Specification for 6 to 30 in. (152 To 762 mm) Polypropylene (PP) Corrugated Single Wall Pipe And Double Wall Pipe
    F2737-10 Specification for Corrugated High Density Polyethylene (HDPE) Water Quality Units
    F2764-10E01 Specification for 30 to 60 in. \[750 to 1500 mm\] Polypropylene (PP) Triple Wall Pipe and Fittings for Non-Pressure Sanitary Sewer Applications
    F2767-09 Specification for Electrofusion Type Polyamide-12 Fittings for Outside Diameter Controlled Polyamide-12 Pipe and Tubing for Gas Distribution
    F2768-09 Specification for Modified Stub ACME Thread Joint with Elastomeric Seal in Plastic Piping Components
    F2769-10 Specification for Polyethylene of Raised Temperature (PE-RT) Plastic Hot and Cold-Water Tubing and Distribution Systems
    F2785-10 Specification for Polyamide 12 Gas Pressure Pipe, Tubing, and Fittings
    F2786-10 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Gaseous Media Under Pressure (Pneumatic Leak Testing)
    F2787-09 Practice for Structural Design of Thermoplastic Corrugated Wall Stormwater Collection Chambers
    F2788-09 Specification for Crosslinked Polyethylene (PEX) Pipe
    F2805-09 Specification for Multilayer Thermoplastic And Flexible Steel Pipe And Connections
    F2806-10 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe (Metric SDR-PR)
    F2817-10 Specification for Poly (Vinyl Chloride) (PVC) Gas Pressure Pipe and Fittings For Maintenance or Repair
    F2818-10 Specification for Specification for Crosslinked Polyethylene (PEX) Material Gas Pressure Pipe and Tubing

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 215
       Pages: 1550

    - 2010
       Standards: 197
       Pages: 1360