ASTM Volume 08.03, July 2011
Plastics (III): D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products
Return to Previous Page
Table of Contents
D5117-09 Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
D5132-11 Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
D5138-06 Classification System for Liquid Crystal Polymers (LCP)
D5155-10 Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
D5203-07 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources
D5204-11 Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
D5205-10 Classification System and Basis for Specification for Polyetherimide (PEI) Materials
D5207-09 Practice for Confirmation of 20\Nmm (50\NW) and 125\Nmm (500\NW) Test Flames for Small-Scale Burning Tests on Plastic Materials
D5208-09 Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
D5210-92R07 Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
D5224-00R06 Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
D5225-09 Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
D5226-98R10E01 Practice for Dissolving Polymer Materials
D5227-01R08E01 Test Method for Measurement of Hexane Extractable Content of Polyolefins
D5260-04R10 Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
D5272-08 Practice for Outdoor Exposure Testing of Photodegradable Plastics
D5279-08 Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
D5296-05 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
D5336-09 Specification for Polyphthalamide (PPA) Injection Molding Materials
D5338-11 Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions, Incorporating Thermophilic Temperatures
D5418-07 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
D5419-09 Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
D5420-10 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
D5420-10 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
D5422-09 Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
D5436-03R08 Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
D5491-08 Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
D5492-10 Test Method for Determination of Xylene Solubles in Propylene Plastics
D5507-99R08E01 Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
D5508-94AR09E01 Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
D5511-11 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
D5523-10 Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
D5526-94R11E01 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
D5575-07 Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
D5576-00R06 Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
D5577-94R10E01 Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
D5592-94R10 Guide for Material Properties Needed in Engineering Design Using Plastics
D5594-98R04 Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
D5628-10 Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
D5628-10 Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
D5629-11 Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
D5630-06 Test Method for Ash Content in Plastics
D5672-09 Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique
D5675-04R10 Classification for Fluoropolymer Micropowders
D5740-09 Guide for Writing Material Standards in the Classification Format
D5814-10 Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
D5857-10 Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
D5870-11 Practice for Calculating Property Retention Index of Plastics
D5927-09 Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
D5930-09 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
D5946-09 Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
D5947-06 Test Methods for Physical Dimensions of Solid Plastics Specimens
D5948-05E01 Specification for Molding Compounds, Thermosetting
D5988-03 Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
D5989-11 Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
D5991-09 Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
D5998-10 Specification for Molded Polyethylene Shipping and Storage Drums
D6040-06 Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6042-09 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
D6068-10 Test Method for Determining Curves of Plastic Materials
D6098-10 Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
D6099-08 Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
D6100-11 Specification for Extruded, Compression Molded and Injection Molded Polyoxymethylene Shapes (POM)
D6108-09 Test Method for Compressive Properties of Plastic Lumber and Shapes
D6109-10 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
D6110-10 Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
D6111-09 Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
D6112-10 Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
D6117-10 Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
D6150-09 Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
D6226-10 Test Method for Open Cell Content of Rigid Cellular Plastics
D6247-10 Test Method for Determination of Elemental Content of Polyolefins by Wavelength Dispersive X-ray Fluorescence Spectrometry
D6248-98R04 Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
D6261-10 Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
D6263-11 Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
D6265-09 Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
D6272-10 Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
D6287-09 Practice for Cutting Film and Sheeting Test Specimens
D6288-09 Practice for Separation and Washing of Recycled Plastics Prior to Testing
D6289-08 Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
D6290-05E01 Test Method for Color Determination of Plastic Pellets
D6338-10 Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
D6339-11 Classification System for and Basis for Specifications for Syndiotactic Polystyrene Molding and Extrusion (SPS)
D6340-98R07 Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
D6341-10 Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between \N30 and 140|SDF (\N34.4 and 60|SDC)
D6342-08 Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
D6358-06 Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods
D6360-07 Practice for Enclosed Carbon-Arc Exposures of Plastics
D6394-10 Specification for Sulfone Plastics (SP)
D6395-11 Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
D6400-04 Specification for Compostable Plastics
D6436-08 Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
D6437-05R10E01 Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
D6456-10 Specification for Finished Parts Made from Polyimide Resin
D6457-08 Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
D6474-99R06 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
D6576-07 Specification for Flexible Cellular Rubber Chemically Blown
D6585-11 Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D6645-01R10 Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
D6662-09 Specification for Polyolefin-Based Plastic Lumber Decking Boards
D6691-09 Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
D6712-01R09 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
D6713-01R09 Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
D6776-02 Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment
D6778-06 Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
D6779-11 Classification System for Polyamide Molding and Extrusion Materials (PA)
D6835-08 Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
D6865-11 Classification System and Basis for Specifications for Acrylonitrile\NStyrene\NAcrylate (ASA) and Acrylonitrile\NEPDM\NStyrene (AES) Plastics and Alloys Molding and Extrusion Materials
D6866-11 Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
D6867-03R09 Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
D6868-11 Specification for Labeling of End Items that Incorporate Plastics and Polymers as Coatings or Additives with Paper and Other Substrates Designed to be Aerobically Composted in Municipal or Industrial Facilities
D6869-03 Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
D6953-03 Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
D6954-04 Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
D6979-08 Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
D6980-09 Test Method for Determination of Moisture in Plastics by Loss in Weight
D6988-08 Guide for Determination of Thickness of Plastic Film Test Specimens
D7026-04 Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
D7027-05E01 Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
D7029-09 Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0|SDF (82.2|SDC)
D7075-04 Practice for Evaluating and Reporting Environmental Performance of Biobased Products
D7081-05 Specification for Non-Floating Biodegradable Plastics in the Marine Environment
D7083-04R10E01 Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
D7107-04R10 Test Method for Creep Measurement of Self-Lubricating Bushings
D7132-05 Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
D7133-11 Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
D7134-05 Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
D7191-10 Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
D7192-10 Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
D7193-11 Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
D7194-05 Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
D7209-06 Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
D7210-06 Practice for Extraction of Additives in Polyolefin Plastics
D7211-06 Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
D7252-06 Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
D7253-06 Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
D7258-09 Specification for Polymeric Piles
D7292-06 Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
D7293-06 Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
D7309-07A Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
D7310-07 Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
D7399-08 Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
D7444-11 Practice for Heat and Humidity Aging of Oxidatively Degradable Plastics
D7471-09 Specification for CPT-Fluoropolymer Molding and Extrusion Materials
D7472-09 Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
D7474-08 Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
D7475-11 Test Method for Determining the Aerobic Degradation and Anaerobic Biodegradation of Plastic Materials under Accelerated Bioreactor Landfill Conditions
D7486-08 Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
D7487-08 Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
D7567-09 Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction
D7611_D7611M-10 Practice for Coding Plastic Manufactured Articles for Resin Identification
C0581-03R08E01 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C0582-09 Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
D2105-01R07E01 Test Method for Longitudinal Tensile Properties of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2143-00R10 Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2310-06 Classification for Machine-Made |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2517-06 Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
D2924-01R06 Test Method for External Pressure Resistance of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2925-01R07E01 Test Method for Beam Deflection of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D2992-06 Practice for Obtaining Hydrostatic or Pressure Design Basis for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2996-01R07E01 Specification for Filament-Wound |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997-01R07E01 Specification for Centrifugally Cast |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D3262-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3299-10 Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3517-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3567-97R06 Practice for Determining Dimensions of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
D3681-06 Test Method for Chemical Resistance of |P`Fiberglass|P' (Glass\NFiber\NReinforced Thermosetting-Resin) Pipe in a Deflected Condition
D3753-05E01 Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
D3754-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3839-08 Guide for Underground Installation of |P`Fiberglass|P' (Glass-FiberReinforced Thermosetting-Resin) Pipe
D3840-10 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
D3982-08 Specification for Contact Molded |P`Fiberglass|P' (Glass Fiber Reinforced Thermosetting Resin) Ducts
D4024-05 Specification for Machine Made |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4097-01R10 Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4161-01R10 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
D4167-97R07 Specification for Fiber-Reinforced Plastic Fans and Blowers
D4398-07 Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
D5364-08E01 Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
D5365-06 Test Method for Long-Term Ring-Bending Strain of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D5421-05R10 Specification for Contact Molded |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D5677-05R10 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
D5685-11 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
D5813-04R08 Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
D6783-05R11 Specification for Polymer Concrete Pipe
D1494-97R08E01 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
D3678-97R08E01 Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
D3679-09A Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3841-97R08E01 Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
D4068-09 Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4226-10 Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4477-09 Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
D4495-00R05 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
D4551-96R08E01 Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
D4726-09 Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
D4756-06 Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
D4803-10 Test Method for Predicting Heat Buildup in PVC Building Products
D5206-06A Test Method for Windload Resistance of Rigid Plastic Siding
D5319-97R08E01 Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
D5926-09 Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
D6777-02R10E01 Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
D6864-11 Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
D7082-04R10 Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
D7251-11 Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
D7254-07 Specification for Polypropylene (PP) Siding
D7445-09 Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)