ASTM Volume 08.02, June 2011

    Plastics (II): D3222 - D5083

    Table of Contents

    D3222-05R10 Specification for Unmodified Poly(Vinylidene Fluoride) (PVDF) Molding Extrusion and Coating Materials
    D3275-08 Classification System for E-CTFE-Fluoroplastic Molding, Extrusion, and Coating Materials
    D3291-97R03 Practice for Compatibility of Plasticizers in Poly(Vinyl Chloride) Plastics Under Compression
    D3294-09 Specification for Polytetrafluoroethylene (PTFE) Resin Molded Sheet and Molded Basic Shapes
    D3295-06R11 Specification for PTFE Tubing, Miniature Beading and Spiral Cut Tubing
    D3296-03R08 Specification for FEP-Fluorocarbon Tube
    D3307-10 Specification for Perfluoroalkoxy (PFA)-Fluorocarbon Resin Molding and Extrusion Materials
    D3308-06 Specification for PTFE Resin Skived Tape
    D3350-10A Specification for Polyethylene Plastics Pipe and Fittings Materials
    D3354-08 Test Method for Blocking Load of Plastic Film by the Parallel Plate Method
    D3364-99R04 Test Method for Flow Rates for Poly(Vinyl Chloride) with Molecular Structural Implications
    D3367-09 Test Method for Plasticizer Sorption of Poly(Vinyl Chloride) Resins Under Applied Centrifugal Force
    D3368-04R10 Specification for FEP-Fluorocarbon Sheet and Film
    D3418-08 Test Method for Transition Temperatures and Enthalpies of Fusion and Crystallization of Polymers by Differential Scanning Calorimetry
    D3419-00R06 Practice for In-Line Screw-Injection Molding Test Specimens From Thermosetting Compounds
    D3420-08A Test Method for Pendulum Impact Resistance of Plastic Film
    D3453-07 Specification for Flexible Cellular Materials\MUrethane for Furniture and Automotive Cushioning, Bedding, and Similar Applications
    D3465-00R07E01 Test Method for Purity of Monomeric Plasticizers by Gas Chromatography
    D3489-06 Test Methods for Microcellular Urethane Materials
    D3574-08 Test Methods for Flexible Cellular Materials\MSlab, Bonded, and Molded Urethane Foams
    D3575-08 Test Methods for Flexible Cellular Materials Made From Olefin Polymers
    D3576-04R10 Test Method for Cell Size of Rigid Cellular Plastics
    D3591-97R11 Test Method for Determining Logarithmic Viscosity Number of Poly(Vinyl Chloride) (PVC) in Formulated Compounds
    D3594-93R06 Test Method for Copolymerized Ethyl Acrylate In Ethylene-Ethyl Acrylate Copolymers
    D3595-02R07 Specification for Polychlorotrifluoroethylene (PCTFE) Extruded Plastic Sheet and Film
    D3596-09 Practice for Determination of Gels (Fisheyes) In General-Purpose Poly(Vinyl Chloride) (PVC) Resins
    D3641-10A Practice for Injection Molding Test Specimens of Thermoplastic Molding and Extrusion Materials
    D3647-09 Practice for Classifying Reinforced Plastic Pultruded Shapes According to Composition
    D3675-09A Test Method for Surface Flammability of Flexible Cellular Materials Using a Radiant Heat Energy Source
    D3676-07 Specification for Rubber Cellular Cushion Used for Carpet or Rug Underlay
    D3748-09 Practice for Evaluating High-Density Rigid Cellular Plastics
    D3749-08 Test Method for Residual Vinyl Chloride Monomer in Poly(Vinyl Chloride) Resins by Gas Chromatographic Headspace Technique
    D3763-10E01 Test Method for High Speed Puncture Properties of Plastics Using Load and Displacement Sensors
    D3768-06 Test Method for Microcellular Urethanes\MFlexural Recovery
    D3769-10 Test Method for Microcellular Urethanes\MHigh-Temperature Sag
    D3795-00AR06 Test Method for Thermal Flow, Cure, and Behavior Properties of Pourable Thermosetting Materials by Torque Rheometer
    D3801-10 Test Method for Measuring the Comparative Burning Characteristics of Solid Plastics in a Vertical Position
    D3814-06 Guide for Locating Combustion Test Methods for Polymeric Materials
    D3826-98R08 Practice for Determining Degradation End Point in Degradable Polyethylene and Polypropylene Using a Tensile Test
    D3835-08 Test Method for Determination of Properties of Polymeric Materials by Means of a Capillary Rheometer
    D3846-08 Test Method for In-Plane Shear Strength of Reinforced Plastics
    D3851-07 Specification for Urethane Microcellular Shoe Soling Materials
    D3892-93R09 Practice for Packaging/Packing of Plastics
    D3895-07 Test Method for Oxidative-Induction Time of Polyolefins by Differential Scanning Calorimetry
    D3914-02R08 Test Method for In-Plane Shear Strength of Pultruded Glass-Reinforced Plastic Rod
    D3915-06 Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Pressure Applications
    D3916-08 Test Method for Tensile Properties of Pultruded Glass-Fiber-Reinforced Plastic Rod
    D3917-11 Specification for Dimensional Tolerance of Thermosetting Glass-Reinforced Plastic Pultruded Shapes
    D3918-11 Terminology Relating to Reinforced Plastic Pultruded Products
    D3935-09 Specification for Polycarbonate (PC) Unfilled and Reinforced Material
    D3965-05 Specification for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Materials for Pipe and Fittings
    D3981-09A Specification for Polyethylene Films Made from Medium-Density Polyethylene for General Use and Packaging Applications
    D4000-11 Classification System for Specifying Plastic Materials
    D4001-93R06 Test Method for Determination of Weight-Average Molecular Weight of Polymers By Light Scattering
    D4020-05 Specification for Ultra-High-Molecular-Weight Polyethylene Molding and Extrusion Materials
    D4065-06 Practice for Plastics: Dynamic Mechanical Properties: Determination and Report of Procedures
    D4066-01AR08 Classification System for Nylon Injection and Extrusion Materials (PA)
    D4067-11 Classification System for and Basis for Specification for Reinforced and Filled Poly(Phenylene Sulfide) (PPS) Injection Molding and Extrusion Materials Using ASTM Methods
    D4092-07 Terminology for Plastics: Dynamic Mechanical Properties
    D4093-95R10 Test Method for Photoelastic Measurements of Birefringence and Residual Strains in Transparent or Translucent Plastic Materials
    D4094-07 Test Method for Acid Content of Ethylene-Acrylic Acid Copolymers
    D4101-10A Specification for Polypropylene Injection and Extrusion Materials
    D4203-07 Specification for Styrene-Acrylonitrile (SAN) Injection and Extrusion Materials
    D4204-06 Practice for Preparing Plastic Film Specimens for a Round-Robin Study
    D4216-06 Specification for Rigid Poly(Vinyl Chloride) (PVC) and Related PVC and Chlorinated Poly(Vinyl Chloride) (CPVC) Building Products Compounds
    D4218-96R08 Test Method for Determination of Carbon Black Content in Polyethylene Compounds By the Muffle-Furnace Technique
    D4272-09 Test Method for Total Energy Impact of Plastic Films By Dart Drop
    D4273-11 Test Method for Polyurethane Raw Materials: Determination of Primary Hydroxyl Content of Polyether Polyols
    D4274-11 Test Methods for Testing Polyurethane Raw Materials: Determination of Hydroxyl Numbers of Polyols
    D4275-09 Test Method for Determination of Butylated Hydroxy Toluene (BHT) in Polymers of Ethylene and Ethylene\NVinyl Acetate (EVA) Copolymers By Gas Chromatography
    D4321-09 Test Method for Package Yield of Plastic Film
    D4329-05 Practice for Fluorescent UV Exposure of Plastics
    D4349-10 Classification System and Basis for Specification for Polyphenylene Ether (PPE) Materials
    D4350-00R05 Test Method for Corrosivity Index of Plastics and Fillers
    D4364-05 Practice for Performing Outdoor Accelerated Weathering Tests of Plastics Using Concentrated Sunlight
    D4385-10 Practice for Classifying Visual Defects in Thermosetting Reinforced Plastic Pultruded Products
    D4396-06 Specification for Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds for Plastic Pipe and Fittings Used in Nonpressure Applications
    D4397-10 Specification for Polyethylene Sheeting for Construction, Industrial, and Agricultural Applications
    D4440-08 Test Method for Plastics Dynamic Mechanical Properties Melt Rheology
    D4441-04R10 Specification for Aqueous Dispersions of Polytetrafluoroethylene
    D4443-07 Test Method for Determining Residual Vinyl Chloride Monomer Content in PPB Range in Vinyl Chloride Homo- and Co-Polymers by Headspace Gas Chromatography
    D4459-06 Practice for Xenon-Arc Exposure of Plastics Intended for Indoor Applications
    D4473-08 Test Method for Plastics: Dynamic Mechanical Properties: Cure Behavior
    D4475-02R08 Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
    D4476-09 Test Method for Flexural Properties of Fiber Reinforced Pultruded Plastic Rods
    D4508-10 Test Method for Chip Impact Strength of Plastics
    D4526-96R07 Practice for Determination of Volatiles in Polymers by Static Headspace Gas Chromatography
    D4549-11 Classification System and Basis for Specification for Polystyrene and Rubber-Modified Polystyrene Molding and Extrusion Materials (PS)
    D4591-07 Test Method for Determining Temperatures and Heats of Transitions of Fluoropolymers by Differential Scanning Calorimetry
    D4603-03 Test Method for Determining Inherent Viscosity of Poly(Ethylene Terephthalate) (PET) by Glass Capillary Viscometer
    D4617-03 Classification System for Phenolic Compounds (PF)
    D4634-11 Classification System and Basis for Specification for Styrene-Maleic Anhydride Molding and Extrusion Materials (S/MA)
    D4635-08A Specification for Polyethylene Films Made from Low-Density Polyethylene for General Use and Packaging Applications
    D4659-09 Test Methods for Polyurethane Raw Materials: Determination of Specific Gravity of Isocyanates
    D4660-06 Test Methods for Polyurethane Raw Materials: Determination of the Isomer Content of Toluenediisocyanate
    D4661-09 Test Methods for Polyurethane Raw Materials: Determination of Total Chlorine in Isocyanates
    D4662-08R11E01 Test Methods for Polyurethane Raw Materials: Determination of Acid and Alkalinity Numbers of Polyols
    D4663-10 Test Method for Polyurethane Raw Materials: Determination of Hydrolyzable Chlorine of Isocyanates
    D4669-07 Test Method for Polyurethane Raw Materials: Determination of Specific Gravity of Polyols
    D4670-07 Test Method for Polyurethane Raw Materials: Determination of Suspended Matter In Polyols
    D4671-05R10E01 Test Methods for Polyurethane Raw Materials: Determination of Unsaturation of Polyols
    D4672-00R06E01 Test Methods for Polyurethane Raw Materials: Determination of Water Content of Polyols
    D4673-02R08 Classification System for Acrylonitrile\NButadiene\NStyrene (ABS) Plastics and Alloys Molding and Extrusion Materials
    D4674-02AR10 Practice for Accelerated Testing for Color Stability of Plastics Exposed to Indoor Office Environments
    D4703-10A Practice for Compression Molding Thermoplastic Materials into Test Specimens, Plaques, or Sheets
    D4745-11 Specification for Filled Compounds of Polytetrafluoroethylene (PTFE) Molding and Extrusion Materials
    D4754-98R03 Test Method for Two-Sided Liquid Extraction of Plastic Materials Using FDA Migration Cell
    D4801-08 Specification for Polyethylene Sheeting in Thickness of 0.25 mm (0.010 in.) and Greater
    D4802-10 Specification for Poly(Methyl Methacrylate) Acrylic Plastic Sheet
    D4804-09 Test Method for Determining the Flammability Characteristics of Nonrigid Solid Plastics
    D4812-06 Test Method for Unnotched Cantilever Beam Impact Resistance of Plastics
    D4819-96R05 Specification for Flexible Cellular Materials Made From Polyolefin Plastics
    D4875-11 Test Methods of Polyurethane Raw Materials: Determination of the Polymerized Ethylene Oxide Content of Polyether Polyols
    D4877-10 Test Method for Polyurethane Raw Materials: Determination of APHA Color in Isocyanates
    D4878-08 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Polyols
    D4883-08 Test Method for Density of Polyethylene by the Ultrasound Technique
    D4889-04R11 Test Methods for Polyurethane Raw Materials: Determination of Viscosity of Crude or Modified Isocyanates
    D4890-06 Test Methods for Polyurethane Raw Materials: Determination of Gardner and APHA Color of Polyols
    D4894-07 Specification for Polytetrafluoroethylene (PTFE) Granular Molding and Ram Extrusion Materials
    D4895-10 Specification for Polytetrafluoroethylene (PTFE) Resin Produced From Dispersion
    D4968-09 Guide for Annual Review of Test Methods and Specifications for Plastics
    D4969-07 Specification for Polytetrafluoroethylene\N(PTFE) Coated Glass Fabric
    D4976-06 Specification for Polyethylene Plastics Molding and Extrusion Materials
    D4986-10 Test Method for Horizontal Burning Characteristics of Cellular Polymeric Materials
    D5017-96R09E01 Test Method for Determination of Linear Low Density Polyethylene (LLDPE) Composition by Carbon-13 Nuclear Magnetic Resonance
    D5023-07 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
    D5024-07 Test Method for Plastics: Dynamic Mechanical Properties: In Compression
    D5025-05 Specification for Laboratory Burner Used for Small-Scale Burning Tests on Plastic Materials
    D5026-06 Test Method for Plastics: Dynamic Mechanical Properties: In Tension
    D5028-09 Test Method for Curing Properties of Pultrusion Resins by Thermal Analysis
    D5045-99R07E01 Test Methods for Plane-Strain Fracture Toughness and Strain Energy Release Rate of Plastic Materials
    D5047-09 Specification for Polyethylene Terephthalate Film and Sheeting
    D5048-09 Test Method for Measuring the Comparative Burning Characteristics and Resistance to Burn-Through of Solid Plastics Using a 125-mm Flame
    D5071-06 Practice for Exposure of Photodegradable Plastics in a Xenon Arc Apparatus
    D5083-10 Test Method for Tensile Properties of Reinforced Thermosetting Plastics Using Straight-Sided Specimens

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 135
       Pages: 912

    - 2010
       Standards: 139
       Pages: 910