ASTM Volume 08.01, June 2011

    Plastics (I): D256 - D3159

    Table of Contents

    D0256-10 Test Methods for Determining the Izod Pendulum Impact Resistance of Plastics
    D0494-04R10E01 Test Method for Acetone Extraction of Phenolic Molded or Laminated Products
    D0542-00R06 Test Method for Index of Refraction of Transparent Organic Plastics
    D0543-06 Practices for Evaluating the Resistance of Plastics to Chemical Reagents
    D0570-98R10E01 Test Method for Water Absorption of Plastics
    D0618-08 Practice for Conditioning Plastics for Testing
    D0635-10 Test Method for Rate of Burning and/or Extent and Time of Burning of Plastics in a Horizontal Position
    D0638-10 Test Method for Tensile Properties of Plastics
    D0648-07 Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
    D0695-10 Test Method for Compressive Properties of Rigid Plastics
    D0696-08 Test Method for Coefficient of Linear Thermal Expansion of Plastics Between \-30|SDC and 30|SDC with a Vitreous Silica Dilatometer
    D0704-99R04 Specification for Melamine-Formaldehyde Molding Compounds
    D0705-99R04 Specification for Urea-Formaldehyde Molding Compounds
    D0706-09 Classification System and Basis for Specifications for Cellulose Acetate Molding and Extrusion Compounds
    D0707-09 Classification System and Basis for Specification for Cellulose Acetate Butyrate Molding and Extrusion Compounds
    D0731-10 Test Method for Molding Index of Thermosetting Molding Powder
    D0732-10 Test Method for Shear Strength of Plastics by Punch Tool
    D0746-07 Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
    D0747-10 Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
    D0785-08 Test Method for Rockwell Hardness of Plastics and Electrical Insulating Materials
    D0787-09 Specification for Ethyl Cellulose Molding and Extrusion Compounds
    D0788-06 Classification System for Poly(Methyl Methacrylate) (PMMA) Molding and Extrusion Compounds
    D0789-07E01 Test Methods for Determination of Solution Viscosities of Polyamide (PA)
    D0790-10 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials
    D0792-08 Test Methods for Density and Specific Gravity (Relative Density) of Plastics by Displacement
    D0882-10 Test Method for Tensile Properties of Thin Plastic Sheeting
    D0883-08 Terminology Relating to Plastics
    D0952-10 Test Method for Bond or Cohesive Strength of Sheet Plastics and Electrical Insulating Materials
    D0953-10 Test Method for Bearing Strength of Plastics
    D0955-08 Test Method of Measuring Shrinkage from Mold Dimensions of Thermoplastics
    D0957-06 Practice for Determining Surface Temperature of Molds for Plastics
    D1003-07E01 Test Method for Haze and Luminous Transmittance of Transparent Plastics
    D1004-09 Test Method for Tear Resistance (Graves Tear) of Plastic Film and Sheeting
    D1042-06 Test Method for Linear Dimensional Changes of Plastics Under Accelerated Service Conditions
    D1043-10 Test Method for Stiffness Properties of Plastics as a Function of Temperature by Means of a Torsion Test
    D1044-08 Test Method for Resistance of Transparent Plastics to Surface Abrasion
    D1045-08 Test Methods for Sampling and Testing Plasticizers Used in Plastics
    D1055-09 Specifications for Flexible Cellular Materials\MLatex Foam
    D1056-07 Specification for Flexible Cellular Materials\MSponge or Expanded Rubber
    D1201-99R04 Specification for Thermosetting Polyester Molding Compounds
    D1203-10 Test Methods for Volatile Loss From Plastics Using Activated Carbon Methods
    D1204-08 Test Method for Linear Dimensional Changes of Nonrigid Thermoplastic Sheeting or Film at Elevated Temperature
    D1238-10 Test Method for Melt Flow Rates of Thermoplastics by Extrusion Plastometer
    D1239-07 Test Method for Resistance of Plastic Films to Extraction by Chemicals
    D1243-95R08 Test Method for Dilute Solution Viscosity of Vinyl Chloride Polymers
    D1248-05 Specification for Polyethylene Plastics Extrusion Materials for Wire and Cable
    D1430-11 Classification System for Polychlorotrifluoroethylene (PCTFE) Plastics
    D1435-05 Practice for Outdoor Weathering of Plastics
    D1499-05 Practice for Filtered Open-Flame Carbon-Arc Exposures of Plastics
    D1505-10 Test Method for Density of Plastics by the Density-Gradient Technique
    D1525-09 Test Method for Vicat Softening Temperature of Plastics
    D1562-09 Classification System and Basis for Specification for Cellulose Acetate Propionate Molding and Extrusion Compounds
    D1593-09 Specification for Nonrigid Vinyl Chloride Plastic Film and Sheeting
    D1600-08 Terminology for Abbreviated Terms Relating to Plastics
    D1601-99R04 Test Method for Dilute Solution Viscosity of Ethylene Polymers
    D1603-06 Test Method for Carbon Black Content in Olefin Plastics
    D1621-10 Test Method for Compressive Properties of Rigid Cellular Plastics
    D1622-08 Test Method for Apparent Density of Rigid Cellular Plastics
    D1623-09 Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
    D1636-99R04E01 Specification for Allyl Molding Compounds
    D1667-05R11 Specification for Flexible Cellular Materials\MPoly (Vinyl Chloride) Foam (Closed-Cell)
    D1693-08 Test Method for Environmental Stress-Cracking of Ethylene Plastics
    D1708-10 Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
    D1709-09 Test Methods for Impact Resistance of Plastic Film by the Free-Falling Dart Method
    D1710-08 Specification for Extruded Polytetrafluoroethylene (PTFE) Rod, Heavy Walled Tubing and Basic Shapes
    D1712-09 Practice for Resistance of Plastics to Sulfide Staining
    D1746-09 Test Method for Transparency of Plastic Sheeting
    D1755-09 Specification for Poly(Vinyl Chloride) Resins
    D1763-00R05 Specification for Epoxy Resins
    D1784-08 Specification for Rigid Poly(Vinyl Chloride) (PVC) Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
    D1786-10 Specification for Toluene Diisocyanate
    D1790-08 Test Method for Brittleness Temperature of Plastic Sheeting by Impact
    D1822-06 Test Method for Tensile-Impact Energy to Break Plastics and Electrical Insulating Materials
    D1823-95R09 Test Method for Apparent Viscosity of Plastisols and Organosols at High Shear Rates by Extrusion Viscometer
    D1824-95R10 Test Method for Apparent Viscosity of Plastisols and Organosols at Low Shear Rates
    D1894-08 Test Method for Static and Kinetic Coefficients of Friction of Plastic Film and Sheeting
    D1895-96R10E01 Test Methods for Apparent Density, Bulk Factor, and Pourability of Plastic Materials
    D1896_D1896M-10 Practice for Transfer Molding Test Specimens of Thermosetting Compounds
    D1921-06E01 Test Methods for Particle Size (Sieve Analysis) of Plastic Materials
    D1922-09 Test Method for Propagation Tear Resistance of Plastic Film and Thin Sheeting by Pendulum Method
    D1929-10 Test Method for Determining Ignition Temperature of Plastics
    D1938-08 Test Method for Tear-Propagation Resistance (Trouser Tear) of Plastic Film and Thin Sheeting by a Single-Tear Method
    D1972-97R05 Practice for Generic Marking of Plastic Products
    D1998-06 Specification for Polyethylene Upright Storage Tanks
    D2103-10 Specification for Polyethylene Film and Sheeting
    D2115-10 Practice for Oven Heat Stability of Poly(Vinyl Chloride) Compositions
    D2116-07 Specification for FEP-Fluorocarbon Molding and Extrusion Materials
    D2124-99R11 Test Method for Analysis of Components in Poly(Vinyl Chloride) Compounds Using an Infrared Spectrophotometric Technique
    D2126-09 Test Method for Response of Rigid Cellular Plastics to Thermal and Humid Aging
    D2222-09 Test Method for Methanol Extract of Vinyl Chloride Resins
    D2238-92R04 Test Methods for Absorbance of Polyethylene Due to Methyl Groups at 1378 cm\-1
    D2287-96R10 Specification for Nonrigid Vinyl Chloride Polymer and Copolymer Molding and Extrusion Compounds
    D2291-09 Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
    D2343-09 Test Method for Tensile Properties of Glass Fiber Strands, Yarns, and Rovings Used in Reinforced Plastics
    D2383-09 Practice for Testing Plasticizer Compatibility in Poly(Vinyl Chloride) (PVC) Compounds Under Humid Conditions
    D2396-94R04 Test Methods for Powder-Mix Time of Poly(Vinyl Chloride) (PVC) Resins Using a Torque Rheometer
    D2457-08E01 Test Method for Specular Gloss of Plastic Films and Solid Plastics
    D2463-10B Test Method for Drop Impact Resistance of Blow-Molded Thermoplastic Containers
    D2538-02R10 Practice for Fusion of Poly(Vinyl Chloride) (PVC) Compounds Using a Torque Rheometer
    D2561-95R05 Test Method for Environmental Stress-Crack Resistance of Blow-Molded Polyethylene Containers
    D2562-94R08 Practice for Classifying Visual Defects in Parts Molded from Reinforced Thermosetting Plastics
    D2563-08 Practice for Classifying Visual Defects in Glass-Reinforced Plastic Laminate Parts
    D2565-99R08 Practice for Xenon-Arc Exposure of Plastics Intended for Outdoor Applications
    D2578-09 Test Method for Wetting Tension of Polyethylene and Polypropylene Films
    D2581-09 Classification System for Polybutylene (PB) Plastics Molding and Extrusion Materials
    D2582-09 Test Method for Puncture-Propagation Tear Resistance of Plastic Film and Thin Sheeting
    D2583-07 Test Method for Indentation Hardness of Rigid Plastics by Means of a Barcol Impressor
    D2584-08 Test Method for Ignition Loss of Cured Reinforced Resins
    D2647-10 Specification for Crosslinkable Ethylene Plastics
    D2659-95R05 Test Method for Column Crush Properties of Blown Thermoplastic Containers
    D2673-09 Specification for Oriented Polypropylene Film
    D2684-10 Test Method for Permeability of Thermoplastic Containers to Packaged Reagents or Proprietary Products
    D2732-08 Test Method for Unrestrained Linear Thermal Shrinkage of Plastic Film and Sheeting
    D2734-09 Test Methods for Void Content of Reinforced Plastics
    D2741-95R05 Test Method for Susceptibility of Polyethylene Bottles to Soot Accumulation
    D2765-01R06 Test Methods for Determination of Gel Content and Swell Ratio of Crosslinked Ethylene Plastics
    D2838-09 Test Method for Shrink Tension and Orientation Release Stress of Plastic Film and Thin Sheeting
    D2839-10 Practice for Use of a Melt Index Strand for Determining Density of Polyethylene
    D2842-06 Test Method for Water Absorption of Rigid Cellular Plastics
    D2843-10 Test Method for Density of Smoke from the Burning or Decomposition of Plastics
    D2857-95R07 Practice for Dilute Solution Viscosity of Polymers
    D2863-10 Test Method for Measuring the Minimum Oxygen Concentration to Support Candle-Like Combustion of Plastics (Oxygen Index)
    D2911-10 Specification for Dimensions and Tolerances for Plastic Bottles
    D2923-08 Test Method for Rigidity of Polyolefin Film and Sheeting
    D2990-09 Test Methods for Tensile, Compressive, and Flexural Creep and Creep-Rupture of Plastics
    D3012-07 Test Method for Thermal-Oxidative Stability of Polypropylene Using a Specimen Rotator Within an Oven
    D3013-99R04E01 Specification for Epoxy Molding Compounds
    D3014-11 Test Method for Flame Height, Time of Burning, and Loss of Mass of Rigid Thermoset Cellular Plastics in a Vertical Position
    D3016-97R10 Practice for Use of Liquid Exclusion Chromatography Terms and Relationships
    D3030-95R06 Test Method for Volatile Matter (Including Water) of Vinyl Chloride Resins
    D3045-92R10 Practice for Heat Aging of Plastics Without Load
    D3123-09 Test Method for Spiral Flow of Low-Pressure Thermosetting Molding Compounds
    D3124-98R11 Test Method for Vinylidene Unsaturation in Polyethylene by Infrared Spectrophotometry
    D3159-10 Specification for Modified ETFE-Fluoropolymer Molding and Extrusion Materials

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 133
       Pages: 920

    - 2010
       Standards: 137
       Pages: 914