ASTM Volume 05.04, March 2011
Petroleum Products and Lubricants (IV): D6973 - latest
Return to Previous Page

Table of Contents

D6973-08E01 Test Method for Indicating Wear Characteristics of Petroleum Hydraulic Fluids in a High Pressure Constant Volume Vane Pump
D6974-09 Practice for Enumeration of Viable Bacteria and Fungi in Liquid Fuels\MFiltration and Culture Procedures
D6975-04R10 Test Method for Cummins M11 EGR Test
D6984-10B Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIF, Spark-Ignition Engine
D6986-03R10 Test Method for Free Water, Particulate and Other Contamination in Aviation Fuels (Visual Inspection Procedures)
D6987_D6987M-05A Test Method for Evaluation of Diesel Engine Oils in T-10 Exhaust Gas Recirculation Diesel Engine
D7038-10 Test Method for Evaluation of Moisture Corrosion Resistance of Automotive Gear Lubricants
D7039-07 Test Method for Sulfur in Gasoline and Diesel Fuel by Monochromatic Wavelength Dispersive X-ray Fluorescence Spectrometry
D7040-04R10 Test Method for Determination of Low Levels of Phosphorus in ILSAC GF 4 and Similar Grade Engine Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
D7041-04R10 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Motor Fuels, and Oils by Online Gas Chromatography with Flame Photometric Detection
D7042-10 Test Method for Dynamic Viscosity and Density of Liquids by Stabinger Viscometer (and the Calculation of Kinematic Viscosity)
D7043-10 Test Method for Indicating Wear Characteristics of Non-Petroleum and Petroleum Hydraulic Fluids in a Constant Volume Vane Pump
D7044-04AR10 Specification for Biodegradable Fire Resistant Hydraulic Fluids
D7058-04R09 Test Method for Determination of the Red Dye Concentration and Estimation of Saybolt Color of Aviation Turbine Fuels and Kerosine Using a Portable Visible Spectrophotometer
D7059-09 Test Method for Determination of Methanol in Crude Oils by Multidimensional Gas Chromatography
D7060-09 Test Method for Determination of the Maximum Flocculation Ratio and Peptizing Power in Residual and Heavy Fuel Oils (Optical Detection Method)
D7061-06 Test Method for Measuring n-Heptane Induced Phase Separation of Asphaltene-Containing Heavy Fuel Oils as Separability Number by an Optical Scanning Device
D7094-04R09 Test Method for Flash Point by Modified Continuously Closed Cup (MCCCFP) Tester
D7095-04R09 Test Method for Rapid Determination of Corrosiveness to Copper from Petroleum Products Using a Disposable Copper Foil Strip
D7096-10 Test Method for Determination of the Boiling Range Distribution of Gasoline by Wide-Bore Capillary Gas Chromatography
D7097-09 Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test\MTEOST MHT
D7098-08E01 Test Method for Oxidation Stability of Lubricants by Thin-Film Oxygen Uptake (TFOUT) Catalyst B
D7109-07 Test Method for Shear Stability of Polymer Containing Fluids Using a European Diesel Injector Apparatus at 30 and 90 Cycles
D7110-05A Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
D7111-05 Test Method for Determination of Trace Elements in Middle Distillate Fuels by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
D7112-09 Test Method for Determining Stability and Compatibility of Heavy Fuel Oils and Crude Oils by Heavy Fuel Oil Stability Analyzer (Optical Detection)
D7152-05E01 Practice for Calculating Viscosity of a Blend of Petroleum Products
D7153-05R10 Test Method for Freezing Point of Aviation Fuels (Automatic Laser Method)
D7154-05R10 Test Method for Freezing Point of Aviation Fuels (Automatic Fiber Optical Method)
D7155-06 Practice for Evaluating Compatibility of Mixtures of Turbine Lubricating Oils
D7156-10A Test Method for Evaluation of Diesel Engine Oils in the T-11 Exhaust Gas Recirculation Diesel Engine
D7157-09 Test Method for Determination of Intrinsic Stability of Asphaltene-Containing Residues, Heavy Fuel Oils, and Crude Oils (-Heptane Phase Separation; Optical Detection)
D7169-05 Test Method for Boiling Point Distribution of Samples with Residues Such as Crude Oils and Atmospheric and Vacuum Residues by High Temperature Gas Chromatography
D7171-05 Test Method for Hydrogen Content of Middle Distillate Petroleum Products by Low-Resolution Pulsed Nuclear Magnetic Resonance Spectroscopy
D7212-07 Test Method for Low Sulfur in Automotive Fuels by Energy-Dispersive X-ray Fluorescence Spectrometry Using a Low-Background Proportional Counter
D7213-05E01 Test Method for Boiling Range Distribution of Petroleum Distillates in the Boiling Range from 100 to 615|SDC by Gas Chromatography
D7214-07A Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
D7215-08 Test Method for Calculated Flash Point from Simulated Distillation Analysis of Distillate Fuels
D7216-10 Test Method for Determining Automotive Engine Oil Compatibility with Typical Seal Elastomers
D7217-05R10E01 Test Method for Determining Extreme Pressure Properties of Solid Bonded Films Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D7220-06 Test Method for Sulfur in Automotive Fuels by Polarization X-ray Fluorescence Spectrometry
D7223-10 Specification for Aviation Certification Turbine Fuel
D7224-08 Test Method for Determining Water Separation Characteristics of Kerosine-Type Aviation Turbine Fuels Containing Additives by Portable Separometer
D7235-10 Guide for Establishing a Linear Correlation Relationship Between Analyzer and Primary Test Method Results Using Relevant ASTM Standard Practices
D7236-07 Test Method for Flash Point by Small Scale Closed Cup Tester (Ramp Method)
D7260-06 Practice for Optimization, Calibration, and Validation of Inductively Coupled Plasma-Atomic Emission Spectrometry (ICP-AES) for Elemental Analysis of Petroleum Products and Lubricants
D7261-08 Test Method for Determining Water Separation Characteristics of Diesel Fuels by Portable Separometer
D7278-06 Guide for Prediction of Analyzer Sample System Lag Times
D7279-08 Test Method for Kinematic Viscosity of Transparent and Opaque Liquids by Automated Houillon Viscometer
D7280-06E01 Test Method for Quinoline-Insoluble (QI) Content of Tar and Pitch by Stainless Steel Crucible Filtration
D7303-06 Test Method for Determination of Metals in Lubricating Greases by Inductively Coupled Plasma Atomic Emission Spectrometry
D7317-07 Test Method for Coagulated Pentane Insolubles in Used Lubricating Oils by Paper Filtration (LMOA Method)
D7318-07 Test Method for Total Inorganic Sulfate in Ethanol by Potentiometric Titration
D7319-09 Test Method for Determination of Total and Potential Sulfate and Inorganic Chloride in Fuel Ethanol by Direct Injection Suppressed Ion Chromatography
D7320-10B Test Method for Evaluation of Automotive Engine Oils in the Sequence IIIG, Spark-Ignition Engine
D7321-08 Test Method for Test Method for Particulate Contamination of Biodiesel B100 Blend Stock Biodiesel Esters and Biodiesel Blends by Laboratory Filtration
D7328-07E01 Test Method for Determination of Total and Potential Inorganic Sulfate and Total Inorganic Chloride in Fuel Ethanol by Ion Chromatography Using Aqueous Sample Injection
D7342-07 Test Method for Shear Stability of Lubricating Grease in Presence of Water (Water Stability Test)
D7343-07 Practice for Optimization, Sample Handling, Calibration, and Validation of X-ray Fluorescence Spectrometry Methods for Elemental Analysis of Petroleum Products and Lubricants
D7344-08 Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Mini Method)
D7345-08 Test Method for Distillation of Petroleum Products at Atmospheric Pressure (Micro Distillation Method)
D7346-07 Test Method for No Flow Point of Petroleum Products
D7347-07E01 Test Method for Determination of Olefin Content in Denatured Ethanol by Supercritical Fluid Chromatography
D7371-07 Test Method for Determination of Biodiesel (Fatty Acid Methyl Esters) Content in Diesel Fuel Oil Using Mid Infrared Spectroscopy (FTIR-ATR-PLS Method)
D7372-07 Guide for Analysis and Interpretation of Proficiency Test Program Results
D7373-07E01 Test Method for Predicting Biodegradability of Lubricants Using a Bio-kinetic Model
D7397-10 Test Method for Cloud Point of Petroleum Products (Miniaturized Optical Method)
D7398-07 Test Method for Boiling Range Distribution of Fatty Acid Methyl Esters (FAME) in the Boiling Range from 100 to 615|SDC by Gas Chromatography
D7412-09 Test Method for Condition Monitoring of Phosphate Antiwear Additives in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7414-09 Test Method for Condition Monitoring of Oxidation in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7415-09 Test Method for Condition Monitoring of Sulfate By-Products in In-Service Petroleum and Hydrocarbon Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7416-09 Practice for Analysis of In-Service Lubricants Using a Particular Five-Part (Dielectric Permittivity, Time-Resolved Dielectric Permittivity with Switching Magnetic Fields, Laser Particle Counter, Microscopic Debris Analysis, and Orbital Viscometer) Integra
D7417-10 Test Method for Analysis of In-Service Lubricants Using Particular Four-Part Integrated Tester (Atomic Emission Spectroscopy, Infrared Spectroscopy, Viscosity, and Laser Particle Counter)
D7418-07 Practice for Set-Up and Operation of Fourier Transform Infrared (FT-IR) Spectrometers for In-Service Oil Condition Monitoring
D7419-07 Test Method for Determination of Total Aromatics and Total Saturates in Lube Basestocks by High Performance Liquid Chromatography (HPLC) with Refractive Index Detection
D7420-10 Test Method for Determining Tribomechanical Properties of Grease Lubricated Plastic Socket Suspension Joints Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D7421-08 Test Method for Determining Extreme Pressure Properties of Lubricating Oils Using High-Frequency, Linear-Oscillation (SRV) Test Machine
D7422-10A Test Method for Evaluation of Diesel Engine Oils in T-12 Exhaust Gas Recirculation Diesel Engine
D7423-09 Test Method for Determination of Oxygenates in C2, C3, C4, and C5 Hydrocarbon Matrices by Gas Chromatography and Flame Ionization Detection
D7450-08 Specification for Performance of Rear Axle Gear Lubricants Intended for API Category GL-5 Service
D7451-08A Test Method for Water Separation Properties of Light and Middle Distillate, and Compression and Spark Ignition Fuels
D7452-10 Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
D7453-09 Practice for Sampling of Petroleum Products for Analysis by Process Stream Analyzers and for Process Stream Analyzer System Validation
D7454-08 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke using a Semi-Automated Apparatus
D7455-08 Practice for Sample Preparation of Petroleum and Lubricant Products for Elemental Analysis
D7462-08 Test Method for Oxidation Stability of Biodiesel (B100) and Blends of Biodiesel with Middle Distillate Petroleum Fuel (Accelerated Method)
D7463-08 Test Method for Adenosine Triphosphate (ATP) Content of Microorganisms in Fuel, Fuel/Water Mixtures and Fuel Associated Water
D7464-08 Practice for Manual Sampling of Liquid Fuels, Associated Materials and Fuel System Components for Microbiological Testing
D7467-10 Specification for Diesel Fuel Oil, Biodiesel Blend (B6 to B20)
D7468-10B Test Method for Cummins ISM Test
D7482-08 Practice for Sampling, Storage, and Handling of Hydrocarbons for Mercury Analysis
D7483-08 Test Method for Determination of Dynamic Viscosity and Derived Kinematic Viscosity of Liquids by Oscillating Piston Viscometer
D7484-10A Test Method for Evaluation of Automotive Engine Oils for Valve-Train Wear Performance in Cummins ISB Medium-Duty Diesel Engine
D7500-10 Test Method for Determination of Boiling Range Distribution of Distillates and Lubricating Base Oils\Min Boiling Range from 100 to 735|SDC by Gas Chromatography
D7501-09B Test Method for Determination of Fuel Filter Blocking Potential of Biodiesel (B100) Blend Stock by Cold Soak Filtration Test (CSFT)
D7524-10 Test Method for Determination of Static Dissipater Additives (SDA) in Aviation Turbine Fuel and Middle Distillate Fuels\MHigh Performance Liquid Chromatograph (HPLC) Method
D7525-09 Test Method for Oxidation Stability of Spark Ignition Fuel\MRapid Small Scale Oxidation Test (RSSOT)
D7527-10 Test Method for Measurement of Antioxidant Content in Lubricating Greases by Linear Sweep Voltammetry
D7528-09 Test Method for Bench Oxidation of Engine Oils by ROBO Apparatus
D7544-10 Specification for Pyrolysis Liquid Biofuel
D7545-09 Test Method for Oxidation Stability of Middle Distillate Fuels\MRapid Small Scale Oxidation Test (RSSOT)
D7546-09 Test Method for Determination of Moisture in New and In-Service Lubricating Oils and Additives by Relative Humidity Sensor
D7547-09 Specification for Unleaded Aviation Gasoline
D7548-09 Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
D7549-09 Test Method for Evaluation of Heavy-Duty Engine Oils under High Output Conditions\MCaterpillar C13 Test Procedure
D7563-10 Test Method for Evaluation of the Ability of Engine Oil to Emulsify Water and Simulated Ed85 Fuel
D7566-10A Specification for Aviation Turbine Fuel Containing Synthesized Hydrocarbons
D7576-10 Test Method for Determination of Benzene and Total Aromatics in Denatured Fuel Ethanol by Gas Chromatography
D7578-10 Guide for Calibration Requirements for Elemental Analysis of Petroleum Products and Lubricants
D7579-09 Test Method for Pyrolysis Solids Content in Pyrolysis Liquids by Filtration of Solids in Methanol
D7589-10 Test Method for Measurement of Effects of Automotive Engine Oils on Fuel Economy of Passenger Cars and Light-Duty Trucks in Sequence VID Spark Ignition Engine
D7590-09 Guide for Measurement of Remaining Primary Antioxidant Content In In-Service Industrial Lubricating Oils by Linear Sweep Voltammetry
D7592-10 Specification for Specification for Grade 94 Unleaded Aviation Gasoline Certification and Test Fuel
D7594-10 Test Method for Determining Fretting Wear Resistance of Lubricating Greases Under High Hertzian Contact Pressures Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
D7596-10 Test Method for Automatic Particle Counting and Particle Shape Classification of Oils Using a Direct Imaging Integrated Tester
D7603-10 Test Method for Determination of Storage Stability and Compatibility in Automotive Gear Oils
D7618-10 Specification for Ethyl Tertiary-Butyl Ether (ETBE) for Blending with Aviation Spark-Ignition Engine Fuel
D7619-10 Test Method for Sizing and Counting Particles in Light and Middle Distillate Fuels, by Automatic Particle Counter
D7620-10 Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
D7621-10 Test Method for Determination of Hydrogen Sulfide in Fuel Oils by Rapid Liquid Phase Extraction
D7622-10E01 Test Method for Total Mercury in Crude Oil Using Combustion and Direct Cold Vapor Atomic Absorption Method with Zeeman Background Correction
D7623-10 Test Method for Total Mercury in Crude Oil Using Combustion-Gold Amalgamation and Cold Vapor Atomic Absorption Method
D7624-10 Test Method for Condition Monitoring of Nitration in In-Service Petroleum and Hydrocarbon-Based Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry
D7646-10 Test Method for Determination of Cooling Characteristics of Aqueous Polymer Quenchants for Aluminum Alloys by Cooling Curve Analysis
D7647-10 Test Method for Automatic Particle Counting of Lubricating and Hydraulic Fluids Using Dilution Techniques to Eliminate the Contribution of Water and Interfering Soft Particles by Light Extinction
D7665-10 Guide for Evaluation of Biodegradable Heat Transfer Fluids
D7667-10 Test Method for Determination of Corrosiveness to Silver by Automotive Spark-Ignition Engine Fuel\MThin Silver Strip Method
D7670-10 Practice for Processing In-service Fluid Samples for Particulate Contamination Analysis Using Membrane Filters
D7671-10 Test Method for Corrosiveness to Silver by Automotive Spark\NIgnition Engine Fuel\NSilver Strip Method
E2412-10 Practice for Condition Monitoring of In-Service Lubricants by Trend Analysis Using Fourier Transform Infrared (FT-IR) Spectrometry