ASTM Volume 05.02, March 2011

    Petroleum Products and Lubricants (II): D3711 - D6122

    Table of Contents

    D3711-95R09 Test Method for Deposition Tendencies of Liquids in Thin Films and Vapors
    D3712-05 Test Method of Analysis of Oil-Soluble Petroleum Sulfonates by Liquid Chromatography
    D3764-09 Practice for Validation of the Performance of Process Stream Analyzer Systems
    D3825-09 Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
    D3827-92R07 Test Method for Estimation of Solubility of Gases in Petroleum and Other Organic Liquids
    D3828-09 Test Methods for Flash Point by Small Scale Closed Cup Tester
    D3829-02R07 Test Method for Predicting the Borderline Pumping Temperature of Engine Oil
    D3831-01R06 Test Method for Manganese in Gasoline By Atomic Absorption Spectroscopy
    D3944-88R05 Test Method for Solidification Point of Petroleum Wax
    D3948-08 Test Method for Determining Water Separation Characteristics of Aviation Turbine Fuels by Portable Separometer
    D4006-07 Test Method for Water in Crude Oil by Distillation
    D4007-08 Test Method for Water and Sediment in Crude Oil by the Centrifuge Method (Laboratory Procedure)
    D4042-93R09 Test Method for Sampling and Testing for Ash and Total Iron in Steel Mill Dispersions of Rolling Oils
    D4045-04R10 Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
    D4046-91R05 Test Method for Alkyl Nitrate in Diesel Fuels by Spectrophotometry
    D4047-00R05 Test Method for Phosphorus in Lubricating Oils and Additives by Quinoline Phosphomolybdate Method
    D4048-10 Test Method for Detection of Copper Corrosion from Lubricating Grease
    D4049-06 Test Method for Determining the Resistance of Lubricating Grease to Water Spray
    D4051-10 Practice for Preparation of Low-Pressure Gas Blends
    D4052-09 Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter
    D4053-04R09 Test Method for Benzene in Motor and Aviation Gasoline by Infrared Spectroscopy
    D4054-09 Practice for Qualification and Approval of New Aviation Turbine Fuels and Fuel Additives
    D4055-04R09 Test Method for Pentane Insolubles by Membrane Filtration
    D4056-01R10 Test Method for Estimation of Solubility of Water in Hydrocarbon and Aliphatic Ester Lubricants
    D4057-06 Practice for Manual Sampling of Petroleum and Petroleum Products
    D4072-98R08 Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch
    D4170-10 Test Method for Fretting Wear Protection by Lubricating Greases
    D4171-03R10 Specification for Fuel System Icing Inhibitors
    D4172-94R10 Test Method for Wear Preventive Characteristics of Lubricating Fluid (Four-Ball Method)
    D4174-89R10 Practice for Cleaning, Flushing, and Purification of Petroleum Fluid Hydraulic Systems
    D4175-09AE01 Terminology Relating to Petroleum, Petroleum Products, and Lubricants
    D4176-04R09 Test Method for Free Water and Particulate Contamination in Distillate Fuels (Visual Inspection Procedures)
    D4177-95R10 Practice for Automatic Sampling of Petroleum and Petroleum Products
    D4178-82R05 Practice for Calibrating Moisture Analyzers
    D4289-03R08 Test Method for Elastomer Compatibility of Lubricating Greases and Fluids
    D4290-07 Test Method for Determining the Leakage Tendencies of Automotive Wheel Bearing Grease Under Accelerated Conditions
    D4291-04R09 Test Method for Trace Ethylene Glycol in Used Engine Oil
    D4292-10 Test Method for Determination of Vibrated Bulk Density of Calcined Petroleum Coke
    D4293-83R08 Specification for Phosphate Ester Based Fluids for Turbine Lubrication
    D4294-10 Test Method for Sulfur in Petroleum and Petroleum Products by Energy Dispersive X-ray Fluorescence Spectrometry
    D4296-83R09 Practice for Sampling Pitch
    D4304-06A Specification for Mineral Lubricating Oil Used in Steam or Gas Turbines
    D4306-07 Practice for Aviation Fuel Sample Containers for Tests Affected by Trace Contamination
    D4307-99R10 Practice for Preparation of Liquid Blends for Use as Analytical Standards
    D4308-10 Test Method for Electrical Conductivity of Liquid Hydrocarbons by Precision Meter
    D4310-10 Test Method for Determination of Sludging and Corrosion Tendencies of Inhibited Mineral Oils
    D4312-95AR10 Test Method for Toluene-Insoluble (TI) Content of Tar and Pitch (Short Method)
    D4377-00R06 Test Method for Water in Crude Oils by Potentiometric Karl Fischer Titration
    D4378-08 Practice for In-Service Monitoring of Mineral Turbine Oils for Steam and Gas Turbines
    D4418-00R06 Practice for Receipt, Storage, and Handling of Fuels for Gas Turbines
    D4419-90R10 Test Method for Measurement of Transition Temperatures of Petroleum Waxes by Differential Scanning Calorimetry (DSC)
    D4422-03R08 Test Method for Ash in Analysis of Petroleum Coke
    D4423-10 Test Method for Determination of Carbonyls in C4 Hydrocarbons
    D4424-09 Test Method for Butylene Analysis by Gas Chromatography
    D4425-09 Test Method for Oil Separation from Lubricating Grease by Centrifuging (Koppers Method)
    D4485-10A Specification for Performance of Engine Oils
    D4486-10 Test Method for Kinematic Viscosity of Volatile and Reactive Liquids
    D4529-01R06 Test Method for Estimation of Net Heat of Combustion of Aviation Fuels
    D4530-07 Test Method for Determination of Carbon Residue (Micro Method)
    D4539-10 Test Method for Filterability of Diesel Fuels by Low-Temperature Flow Test (LTFT)
    D4616-95R08 Test Method for Microscopical Analysis by Reflected Light and Determination of Mesophase in a Pitch
    D4625-04R09 Test Method for Middle Distillate Fuel Storage Stability at 43|SDC (110|SDF)
    D4626-95R10 Practice for Calculation of Gas Chromatographic Response Factors
    D4627-92R07 Test Method for Iron Chip Corrosion for Water\NDilutable Metalworking Fluids
    D4628-05 Test Method for Analysis of Barium, Calcium, Magnesium, and Zinc in Unused Lubricating Oils by Atomic Absorption Spectrometry
    D4629-10 Test Method for Trace Nitrogen in Liquid Petroleum Hydrocarbons by Syringe/Inlet Oxidative Combustion and Chemiluminescence Detection
    D4636-09 Test Method for Corrosiveness and Oxidation Stability of Hydraulic Oils, Aircraft Turbine Engine Lubricants, and Other Highly Refined Oils
    D4682-08 Specification for Miscibility with Gasoline and Fluidity of Two-Stroke-Cycle Gasoline Engine Lubricants
    D4683-10 Test Method for Measuring Viscosity of New and Used Engine Oils at High Shear Rate and High Temperature by Tapered Bearing Simulator Viscometer at 150 |SDC
    D4684-08 Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
    D4693-07 Test Method for Low-Temperature Torque of Grease-Lubricated Wheel Bearings
    D4715-98R08E01 Test Method for Coking Value of Tar and Pitch (Alcan)
    D4737-10 Test Method for Calculated Cetane Index by Four Variable Equation
    D4739-08E01 Test Method for Base Number Determination by Potentiometric Hydrochloric Acid Titration
    D4740-04R09 Test Method for Cleanliness and Compatibility of Residual Fuels by Spot Test
    D4741-06 Test Method for Measuring Viscosity at High Temperature and High Shear Rate by Tapered-Plug Viscometer
    D4742-08E01 Test Method for Oxidation Stability of Gasoline Automotive Engine Oils by Thin-Film Oxygen Uptake (TFOUT)
    D4746-98R08 Test Method for Determination of Quinoline Insolubles (QI) in Tar and Pitch by Pressure Filtration
    D4806-10B Specification for Denatured Fuel Ethanol for Blending with Gasolines for Use as Automotive Spark-Ignition Engine Fuel
    D4807-05R10 Test Method for Sediment in Crude Oil by Membrane Filtration
    D4808-01R06 Test Methods for Hydrogen Content of Light Distillates, Middle Distillates, Gas Oils, and Residua by Low-Resolution Nuclear Magnetic Resonance Spectroscopy
    D4809-09A Test Method for Heat of Combustion of Liquid Hydrocarbon Fuels by Bomb Calorimeter (Precision Method)
    D4814-10B Specification for Automotive Spark-Ignition Engine Fuel
    D4815-09 Test Method for Determination of MTBE, ETBE, TAME, DIPE, tertiary-Amyl Alcohol and C1 to C4 Alcohols in Gasoline by Gas Chromatography
    D4857-08 Test Method for Determination of the Ability of Lubricants to Minimize Ring Sticking and Piston Deposits in Two-Stroke-Cycle Gasoline Engines Other Than Outboards
    D4858-08 Test Method for Determination of the Tendency of Lubricants to Promote Preignition in Two-Stroke-Cycle Gasoline Engines
    D4859-08 Specification for Lubricants for Two-Stroke-Cycle Spark-Ignition Gasoline Engines-TC
    D4860-08 Test Method for Free Water and Particulate Contamination in Middle Distillate Fuels (Clear and Bright Numerical Rating)
    D4863-10 Test Method for Determination of Lubricity of Two-Stroke-Cycle Gasoline Engine Lubricants
    D4864-90R05 Test Method for Determination of Traces of Methanol in Propylene Concentrates by Gas Chromatography
    D4865-09 Guide for Generation and Dissipation of Static Electricity in Petroleum Fuel Systems
    D4868-00R10 Test Method for Estimation of Net and Gross Heat of Combustion of Burner and Diesel Fuels
    D4870-09 Test Method for Determination of Total Sediment in Residual Fuels
    D4871-06 Guide for Universal Oxidation/Thermal Stability Test Apparatus
    D4892-89R09 Test Method for Density of Solid Pitch (Helium Pycnometer Method)
    D4893-94R09 Test Method for Determination of Pitch Volatility
    D4898-90R10 Test Method for Insoluble Contamination of Hydraulic Fluids by Gravimetric Analysis
    D4927-10 Test Methods for Elemental Analysis of Lubricant and Additive Components\MBarium, Calcium, Phosphorus, Sulfur, and Zinc by Wavelength-Dispersive X-Ray Fluorescence Spectroscopy
    D4928-00R10 Test Methods for Water in Crude Oils by Coulometric Karl Fischer Titration
    D4929-07 Test Methods for Determination of Organic Chloride Content in Crude Oil
    D4930-06 Test Method for Dust Control Material on Calcined Petroleum Coke
    D4931-06 Test Method for Gross Moisture in Green Petroleum Coke
    D4950-08 Classification and Specification for Automotive Service Greases,
    D4951-09 Test Method for Determination of Additive Elements in Lubricating Oils by Inductively Coupled Plasma Atomic Emission Spectrometry
    D4952-09 Test Method for Qualitative Analysis for Active Sulfur Species in Fuels and Solvents (Doctor Test)
    D4953-06 Test Method for Vapor Pressure of Gasoline and Gasoline-Oxygenate Blends (Dry Method)
    D4998-95R03E01 Test Method for Evaluating Wear Characteristics of Tractor Hydraulic Fluids
    D5000-05 Practice for Evaluating Activity of Clay Elements Using a Side-Stream Sensor
    D5001-10 Test Method for Measurement of Lubricity of Aviation Turbine Fuels by the Ball-on-Cylinder Lubricity Evaluator (BOCLE)
    D5002-99R10 Test Method for Density and Relative Density of Crude Oils by Digital Density Analyzer
    D5003-06A Test Method for Hardgrove Grindability Index (HGI) of Petroleum Coke
    D5004-89R09 Test Method for Real Density of Calcined Petroleum Coke by Xylene Displacement
    D5006-10E01 Test Method for Measurement of Fuel System Icing Inhibitors (Ether Type) in Aviation Fuels
    D5018-89R09 Test Method for Shear Viscosity of Coal-Tar and Petroleum Pitches
    D5056-04R10 Test Method for Trace Metals in Petroleum Coke by Atomic Absorption
    D5059-07 Test Methods for Lead in Gasoline by X-Ray Spectroscopy
    D5133-05 Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
    D5134-98R08E01 Test Method for Detailed Analysis of Petroleum Naphthas through n-Nonane by Capillary Gas Chromatography
    D5182-97R08 Test Method for Evaluating the Scuffing Load Capacity of Oils (FZG Visual Method)
    D5183-05 Test Method for Determination of the Coefficient of Friction of Lubricants Using the Four-Ball Wear Test Machine
    D5184-01R06 Test Methods for Determination of Aluminum and Silicon in Fuel Oils by Ashing, Fusion, Inductively Coupled Plasma Atomic Emission Spectrometry, and Atomic Absorption Spectrometry
    D5185-09 Test Method for Determination of Additive Elements, Wear Metals, and Contaminants in Used Lubricating Oils and Determination of Selected Elements in Base Oils by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    D5186-03R09 Test Method for Determination of the Aromatic Content and Polynuclear Aromatic Content of Diesel Fuels and Aviation Turbine Fuels By Supercritical Fluid Chromatography
    D5187-10 Test Method for Determination of Crystallite Size (Lc of Calcined Petroleum Coke by X-Ray Diffraction
    D5188-10A Test Method for Vapor-Liquid Ratio Temperature Determination of Fuels (Evacuated Chamber Method)
    D5190-07 Test Method for Vapor Pressure of Petroleum Products (Automatic Method)
    D5191-10B Test Method for Vapor Pressure of Petroleum Products (Mini Method)
    D5234-92R07 Guide for Analysis of Ethylene Product
    D5236-03R07 Test Method for Distillation of Heavy Hydrocarbon Mixtures (Vacuum Potstill Method)
    D5273-92R07 Guide for Analysis of Propylene Concentrates
    D5274-00R09 Guide for Analysis of 1,3\NButadiene Product
    D5275-03 Test Method for Fuel Injector Shear Stability Test (FISST) for Polymer Containing Fluids
    D5291-10 Test Methods for Instrumental Determination of Carbon, Hydrogen, and Nitrogen in Petroleum Products and Lubricants
    D5292-99R09 Test Method for Aromatic Carbon Contents of Hydrocarbon Oils by High Resolution Nuclear Magnetic Resonance Spectroscopy
    D5293-10 Test Method for Apparent Viscosity of Engine Oils and Base Stocks Between \N5 and \N35|SDC Using Cold-Cranking Simulator
    D5303-92R07 Test Method for Trace Carbonyl Sulfide in Propylene by Gas Chromatography
    D5304-06 Test Method for Assessing Middle Distillate Fuel Storage Stability by Oxygen Overpressure
    D5305-97R07 Test Method for Determination of Ethyl Mercaptan in LP-Gas Vapor
    D5306-92R07 Test Method for Linear Flame Propagation Rate of Lubricating Oils and Hydraulic Fluids
    D5307-97R07 Test Method for Determination of Boiling Range Distribution of Crude Petroleum by Gas Chromatography
    D5372-04R09 Guide for Evaluation of Hydrocarbon Heat Transfer Fluids
    D5384-95R05 Test Methods for Chlorine in Used Petroleum Products (Field Test Kit Method)
    D5441-98R08E01 Test Method for Analysis of Methyl Tert-Butyl Ether (MTBE) by Gas Chromatography
    D5442-93R08 Test Method for Analysis of Petroleum Waxes by Gas Chromatography
    D5443-04R09E01 Test Method for Paraffin, Naphthene, and Aromatic Hydrocarbon Type Analysis in Petroleum Distillates Through 200|SDC by Multi-Dimensional Gas Chromatography
    D5452-08 Test Method for Particulate Contamination in Aviation Fuels by Laboratory Filtration
    D5453-09 Test Method for Determination of Total Sulfur in Light Hydrocarbons, Spark Ignition Engine Fuel, Diesel Engine Fuel, and Engine Oil by Ultraviolet Fluorescence
    D5481-10 Test Method for Measuring Apparent Viscosity at High-Temperature and High-Shear Rate by Multicell Capillary Viscometer
    D5482-07 Test Method for Vapor Pressure of Petroleum Products (Mini Method\MAtmospheric)
    D5483-05R10 Test Method for Oxidation Induction Time of Lubricating Greases by Pressure Differential Scanning Calorimetry
    D5500-98R08 Test Method for Vehicle Evaluation of Unleaded Automotive Spark-Ignition Engine Fuel for Intake Valve Deposit Formation
    D5501-09 Test Method for Determination of Ethanol Content of Denatured Fuel Ethanol by Gas Chromatography
    D5502-00R10 Test Method for Apparent Density by Physical Measurements of Manufactured Anode and Cathode Carbon Used by the Aluminum Industry
    D5534-94R05 Test Method for Vapor-Phase Rust-Preventing Characteristics of Hydraulic Fluids
    D5579-10A Test Method for Evaluating the Thermal Stability of Manual Transmission Lubricants in a Cyclic Durability Test
    D5580-02R07 Test Method for Determination of Benzene, Toluene, Ethylbenzene, -Xylene, -Xylene, C9 and Heavier Aromatics, and Total Aromatics in Finished Gasoline by Gas Chromatography
    D5598-01R07 Test Method for Evaluating Unleaded Automotive Spark-Ignition Engine Fuel for Electronic Port Fuel Injector Fouling
    D5599-00R10 Test Method for Determination of Oxygenates in Gasoline by Gas Chromatography and Oxygen Selective Flame Ionization Detection
    D5600-09 Test Method for Trace Metals in Petroleum Coke by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES)
    D5619-00R05 Test Method for Comparing Metal Removal Fluids Using the Tapping Torque Test Machine
    D5621-07 Test Method for Sonic Shear Stability of Hydraulic Fluids
    D5622-95R05 Test Methods for Determination of Total Oxygen in Gasoline and Methanol Fuels by Reductive Pyrolysis
    D5623-94R09 Test Method for Sulfur Compounds in Light Petroleum Liquids by Gas Chromatography and Sulfur Selective Detection
    D5662-10 Test Method for Determining Automotive Gear Oil Compatibility with Typical Oil Seal Elastomers
    D5704-10 Test Method for Evaluation of the Thermal and Oxidative Stability of Lubricating Oils Used for Manual Transmissions and Final Drive Axles
    D5705-03R08 Test Method for Measurement of Hydrogen Sulfide in the Vapor Phase Above Residual Fuel Oils
    D5706-05 Test Method for Determining Extreme Pressure Properties of Lubricating Greases Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    D5707-05 Test Method for Measuring Friction and Wear Properties of Lubricating Grease Using a High-Frequency, Linear-Oscillation (SRV) Test Machine
    D5708-05 Test Methods for Determination of Nickel, Vanadium, and Iron in Crude Oils and Residual Fuels by Inductively Coupled Plasma (ICP) Atomic Emission Spectrometry
    D5709-09 Test Method for Sieve Analysis of Petroleum Coke
    D5760-09 Specification for Performance of Manual Transmission Gear Lubricants
    D5761-96R06 Practice for Emulsification/Suspension of Multiphase Fluid Waste Materials
    D5762-10 Test Method for Nitrogen in Petroleum and Petroleum Products by Boat-Inlet Chemiluminescence
    D5763-95R06E01 Test Method for Oxidation and Thermal Stability Characteristics of Gear Oils Using Universal Glassware
    D5769-10 Test Method for Determination of Benzene, Toluene, and Total Aromatics in Finished Gasolines by Gas Chromatography/Mass Spectrometry
    D5770-02R07 Test Method for Semiquantitative Micro Determination of Acid Number of Lubricating Oils During Oxidation Testing
    D5771-10 Test Method for Cloud Point of Petroleum Products (Optical Detection Stepped Cooling Method)
    D5772-10 Test Method for Cloud Point of Petroleum Products (Linear Cooling Rate Method)
    D5773-10 Test Method for Cloud Point of Petroleum Products (Constant Cooling Rate Method)
    D5797-07 Specification for Fuel Methanol (M70-M85) for Automotive Spark-Ignition Engines
    D5798-10 Specification for Fuel Ethanol (Ed70-Ed85) for Automotive Spark-Ignition Engines
    D5799-95R09 Test Method for Determination of Peroxides in Butadiene
    D5800-10 Test Method for Evaporation Loss of Lubricating Oils by the Noack Method
    D5842-04R09 Practice for Sampling and Handling of Fuels for Volatility Measurement
    D5845-01R06 Test Method for Determination of MTBE, ETBE, TAME, DIPE, Methanol, Ethanol and -Butanol in Gasoline by Infrared Spectroscopy
    D5846-07 Test Method for Universal Oxidation Test for Hydraulic and Turbine Oils Using the Universal Oxidation Test Apparatus
    D5853-09 Test Method for Pour Point of Crude Oils
    D5854-96R10 Practice for Mixing and Handling of Liquid Samples of Petroleum and Petroleum Products
    D5863-00AR05 Test Methods for Determination of Nickel, Vanadium, Iron, and Sodium in Crude Oils and Residual Fuels by Flame Atomic Absorption Spectrometry
    D5864-05 Test Method for Determining Aerobic Aquatic Biodegradation of Lubricants or Their Components
    D5949-10 Test Method for Pour Point of Petroleum Products (Automatic Pressure Pulsing Method)
    D5950-02R07 Test Method for Pour Point of Petroleum Products (Automatic Tilt Method)
    D5966-10 Test Method for Evaluation of Engine Oils for Roller Follower Wear in Light-Duty Diesel Engine
    D5967-10A Test Method for Evaluation of Diesel Engine Oils in T-8 Diesel Engine
    D5968-06 Test Method for Evaluation of Corrosiveness of Diesel Engine Oil at 121|SDC
    D5969-08 Test Method for Corrosion-Preventive Properties of Lubricating Greases in Presence of Dilute Synthetic Sea Water Environments
    D5972-05R10 Test Method for Freezing Point of Aviation Fuels (Automatic Phase Transition Method)
    D5983-06 Specification for Methyl Tertiary-Butyl Ether (MTBE) for Downstream Blending for Use in Automotive Spark-Ignition Engine Fuel
    D5984-97R07 Test Method for Semi-Quantitative Field Test Method for Base Number in New and Used Lubricants by Color-Indicator Titration
    D5985-02R08 Test Method for Pour Point of Petroleum Products (Rotational Method)
    D5986-96R06 Test Method for Determination of Oxygenates, Benzene, Toluene, C8\NC 12 Aromatics and Total Aromatics in Finished Gasoline by Gas Chromatography/Fourier Transform Infrared Spectroscopy
    D6006-97AR08 Guide for Assessing Biodegradability of Hydraulic Fluids
    D6021-06 Test Method for Measurement of Total Hydrogen Sulfide in Residual Fuels by Multiple Headspace Extraction and Sulfur Specific Detection
    D6022-06 Practice for Calculation of Permanent Shear Stability Index
    D6045-09 Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
    D6046-02R06 Classification of Hydraulic Fluids for Environmental Impact
    D6074-08 Guide for Characterizing Hydrocarbon Lubricant Base Oils
    D6078-04R10 Test Method for Evaluating Lubricity of Diesel Fuels by the Scuffing Load Ball-on-Cylinder Lubricity Evaluator (SLBOCLE)
    D6079-04E01 Test Method for Evaluating Lubricity of Diesel Fuels by the High-Frequency Reciprocating Rig (HFRR)
    D6080-10 Practice for Defining the Viscosity Characteristics of Hydraulic Fluids
    D6081-98R09 Practice for Aquatic Toxicity Testing of Lubricants: Sample Preparation and Results Interpretation
    D6082-06 Test Method for High Temperature Foaming Characteristics of Lubricating Oils
    D6120-97R07 Test Method for Electrical Resistivity of Anode and Cathode Carbon Material at Room Temperature
    D6121-10 Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
    D6122-10 Practice for Validation of the Performance of Multivariate Online, At-Line, and Laboratory Infrared Spectrophotometer Based Analyzer Systems

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 216
       Pages: 1776

    - 2010
       Standards: 203
       Pages: 1536