Standards / Annual Book of ASTM Standards

The 80+ volume Annual Book of ASTM Standards contains ASTM's 12,000+ standards and is available in print, CD-ROM and Online formats (learn more about format options). The volumes can be purchased individually, as a section (at a 25% discount) or as the complete 80+ volume set (at a 50% discount).


Contents
More Information

Ordering Options
Print, CD-ROM or NOW get Online Access to this Volume
(Basic or Plus)

View Contents

- 2011
   Standards: 167
   Pages: 1588

- 2010
   Standards: 158
   Pages: 1532

ASTM Volume 04.09, April 2011
Soil and Rock (II): D5877 - latest
Return to Previous Page

Table of Contents

D5877-95R05 Guide for Displaying Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MDiagrams Based on Data Analytical Calculations
D5878-08 Guides for Using Rock-Mass Classification Systems for Engineering Purposes
D5879-95R10 Practice for Surface Site Characterization for On-Site Septic Systems
D5880-95R06 Guide for Subsurface Flow and Transport Modeling
D5881-95R05 Test Method for (Analytical Procedure) Determining Transmissivity of Confined Nonleaky Aquifers by Critically Damped Well Response to Instantaneous Change in Head (Slug)
D5882-07 Test Method for Low Strain Impact Integrity Testing of Deep Foundations
D5883-96R08 Guide for Use of Rotary Kiln Produced Expanded Shale, Clay or Slate (ESCS) as a Mineral Amendment in Topsoil Used for Landscaping and Related Purposes
D5903-96R06 Guide for Planning and Preparing for a Groundwater Sampling Event
D5911_D5911M-96R10E01 Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
D5912-96R04 Test Method for (Analytical Procedure) Determining Hydraulic Conductivity of an Unconfined Aquifer by Overdamped Well Response to Instantaneous Change in Head (Slug)
D5918-06 Test Methods for Frost Heave and Thaw Weakening Susceptibility of Soils
D5920-96R05 Test Method (Analytical Procedure) for Tests of Anisotropic Unconfined Aquifers by Neuman Method
D5921-96R10 Practice for Subsurface Site Characterization of Test Pits for On-Site Septic Systems
D5922-96R10 Guide for Analysis of Spatial Variation in Geostatistical Site Investigations
D5923-96R10 Guide for Selection of Kriging Methods in Geostatistical Site Investigations
D5924-96R10 Guide for Selection of Simulation Approaches in Geostatistical Site Investigations
D5971-07 Practice for Sampling Freshly Mixed Controlled Low-Strength Material
D5978-96R05 Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells
D5979-96R08 Guide for Conceptualization and Characterization of Ground-Water Systems
D5980-96R10E01 Guide for Selection and Documentation of Existing Wells for Use in Environmental Site Characterization and Monitoring
D5981-96R08 Guide for Calibrating a Ground-Water Flow Model Application
D5982-07 Test Method for Determining Cement Content of Fresh Soil-Cement (Heat of Neutralization Method)
D5995-98R10 Guide for Environmental Site Characterization in Cold Regions
D6000-96R08 Guide for Presentation of Water-Level Information from Ground-Water Sites
D6001-05 Guide for Direct-Push Ground Water Sampling for Environmental Site Characterization
D6023-07 Test Method for Density (Unit Weight), Yield, Cement Content, and Air Content (Gravimetric) of Controlled Low-Strength Material (CLSM)
D6024-07 Test Method for Ball Drop on Controlled Low Strength Material (CLSM) to Determine Suitability for Load Application
D6025-96R08 Guide for Developing and Evaluating Ground-Water Modeling Codes
D6026-06 Practice for Using Significant Digits in Geotechnical Data
D6027-96R04 Practice for Calibrating Linear Displacement Transducers for Geotechnical Purposes
D6028-96R10E01 Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer Taking into Consideration Storage of Water in Leaky Confining Beds by Modified Hantush Method
D6029-96R10E01 Test Method (Analytical Procedure) for Determining Hydraulic Properties of a Confined Aquifer and a Leaky Confining Bed with Negligible Storage by the Hantush-Jacob Method
D6030-96R08 Guide for Selection of Methods for Assessing Ground Water or Aquifer Sensitivity and Vulnerability
D6031_D6031M-96R10E01 Test Method for Logging In Situ Moisture Content and Density of Soil and Rock by the Nuclear Method in Horizontal, Slanted, and Vertical Access Tubes
D6032-08 Test Method for Determining Rock Quality Designation (RQD) of Rock Core
D6033-96R08 Guide for Describing the Functionality of a Ground-Water Modeling Code
D6034-96R10E01 Test Method (Analytical Procedure) for Determining the Efficiency of a Production Well in a Confined Aquifer from a Constant Rate Pumping Test
D6035-08 Test Method for Determining the Effect of Freeze-Thaw on Hydraulic Conductivity of Compacted or Intact Soil Specimens Using a Flexible Wall Permeameter
D6036-96R08 Guide for Displaying the Results of Chemical Analyses of Ground Water for Major Ions and Trace Elements\MUse of Maps
D6066-96R04 Practice for Determining the Normalized Penetration Resistance of Sands for Evaluation of Liquefaction Potential
D6067-10 Practice for Using the Electronic Piezocone Penetrometer Tests for Environmental Site Characterization
D6089-97R10 Guide for Documenting a Ground-Water Sampling Event
D6092-97R08 Practice for Specifying Standard Sizes of Stone for Erosion Control
D6103-04 Test Method for Flow Consistency of Controlled Low Strength Material (CLSM)
D6106-97R10 Guide for Establishing Nomenclature of Ground-Water Aquifers
D6128-06 Test Method for Shear Testing of Bulk Solids Using the Jenike Shear Cell
D6151-08 Practice for Using Hollow-Stem Augers for Geotechnical Exploration and Soil Sampling
D6167-97R04 Guide for Conducting Borehole Geophysical Logging: Mechanical Caliper
D6168-97R10 Guide for Selection of Minimum Set of Data Elements Required to Identify Locations Chosen for Field Collection of Information to Describe Soil, Rock, and Their Contained Fluids
D6169-98R05 Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
D6170-97R10 Guide for Selecting a Ground-Water Modeling Code
D6171-97R10 Guide for Documenting a Ground-Water Modeling Code
D6187-97R10 Practice for Cone Penetrometer Technology Characterization of Petroleum Contaminated Sites with Nitrogen Laser-Induced Fluorescence
D6230-98R05 Test Method for Monitoring Ground Movement Using Probe-Type Inclinometers
D6235-04R10 Practice for Expedited Site Characterization of Vadose Zone and Ground Water Contamination at Hazardous Waste Contaminated Sites
D6236-98R04 Guide for Coring and Logging Cement - or Lime-Stabilized Soil
D6274-98R04 Guide for Conducting Borehole Geophysical Logging - Gamma
D6276-99AR06E01 Test Method for Using pH to Estimate the Soil-Lime Proportion Requirement for Soil Stabilization
D6282-98R05 Guide for Direct Push Soil Sampling for Environmental Site Characterizations
D6285-99R05 Guide for Locating Abandoned Wells
D6286-98R06 Guide for Selection of Drilling Methods for Environmental Site Characterization
D6312-98R05 Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs
D6391-06 Test Method for Field Measurement of Hydraulic Conductivity Limits of Porous Materials Using Two Stages of Infiltration from a Borehole
D6393-08 Test Method for Bulk Solids Characterization by Carr Indices
D6429-99R06 Guide for Selecting Surface Geophysical Methods
D6430-99R10 Guide for Using the Gravity Method for Subsurface Investigation
D6431-99R10 Guide for Using the Direct Current Resistivity Method for Subsurface Investigation
D6432-99R05 Guide for Using the Surface Ground Penetrating Radar Method for Subsurface Investigation
D6449-99R08 Test Method for Flow of Fine Aggregate Concrete for Fabric Formed Concrete (Flow Cone Method)
D6452-99R05 Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations
D6459-07 Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Hillslopes from Rainfall-Induced Erosion
D6460-07 Test Method for Determination of Rolled Erosion Control Product (RECP) Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D6461-99R07E02 Specification for Silt Fence Materials
D6462-03R08 Practice for Silt Fence Installation
D6467-06A Test Method for Torsional Ring Shear Test to Determine Drained Residual Shear Strength of Cohesive Soils
D6473-10 Test Method For Specific Gravity And Absorption of Rock For Erosion Control
D6475-06 Test Method for Measuring Mass Per Unit Area of Erosion Control Blankets
D6517-00R05 Guide for Field Preservation of Ground-Water Samples
D6519-08 Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
D6527-00R08 Test Method for Determining Unsaturated and Saturated Hydraulic Conductivity in Porous Media by Steady-State Centrifugation
D6528-07 Test Method for Consolidated Undrained Direct Simple Shear Testing of Cohesive Soils
D6539-00R06E02 Test Method for Measurement of Pneumatic Permeability of Partially Saturated Porous Materials by Flowing Air
D6564-00R05 Guide for Field Filtration of Ground-Water Samples
D6565-00R05 Test Method for Determination of Water (Moisture) Content of Soil by the Time-Domain Reflectometry (TDR) Method
D6572-06 Test Methods for Determining Dispersive Characteristics of Clayey Soils by the Crumb Test
D6598-07 Guide for Installing and Operating Settlement Platforms for Monitoring Vertical Deformations
D6599-00R08 Practice for Construction of Live Fascines on Slopes
D6629-01R07 Guide for Selection of Methods for Estimating Soil Loss by Erosion
D6634-01R06 Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
D6635-01R07 Test Method for Performing the Flat Plate Dilatometer
D6639-01R08 Guide for Using the Frequency Domain Electromagnetic Method for Subsurface Investigations
D6642-01R06 Guide for Comparison of Techniques to Quantify the Soil-Water (Moisture) Flux
D6682-08 Test Method for Measuring Shear Stresses of Powders Using Peschl Rotational Split Level Shear Tester
D6683-08 Test Method for Measuring Bulk Density Values of Powders and Other Bulk Solids as Function of Compressive Stress
D6684-04R10 Specification for Materials and Manufacture of Articulating Concrete Block (ACB) Revetment Systems
D6685-01R08 Guide for the Selection of Test Methods for Fabrics Used for Fabric Formed Concrete (FFC)
D6711-01R08 Practice for Specifying Rock to Fill Gabions, Revet Mattresses, and Gabion Mattresses
D6724-04R10 Guide for Installation of Direct Push Ground Water Monitoring Wells
D6725-04R10 Practice for Direct Push Installation of Prepacked Screen Monitoring Wells in Unconsolidated Aquifers
D6726-01R07 Guide for Conducting Borehole Geophysical Logging\MElectromagnetic Induction
D6727-01R07 Guide for Conducting Borehole Geophysical Logging\MNeutron
D6758-08 Test Method for Measuring Stiffness and Apparent Modulus of Soil and Soil-Aggregate In-Place by Electro-Mechanical Method
D6760-08 Test Method for Integrity Testing of Concrete Deep Foundations by Ultrasonic Crosshole Testing
D6765-02R08 Practice for Live Staking
D6773-08 Test Method for Bulk Solids Using Schulze Ring Shear Tester
D6780-05 Test Method for Water Content and Density of Soil in Place by Time Domain Reflectometry (TDR)
D6820-02R07 Guide for Use of the Time Domain Electromagnetic Method for Subsurface Investigation
D6825-02R08E01 Guide for Placement of Riprap Revetments
D6836-02R08E02 Test Methods for Determination of the Soil Water Characteristic Curve for Desorption Using Hanging Column, Pressure Extractor, Chilled Mirror Hygrometer, or Centrifuge
D6884-03R10 Practice for Installation of Articulating Concrete Block (ACB) Revetment Systems
D6910_D6910M-09 Test Method for Marsh Funnel Viscosity of Clay Construction Slurries
D6911-03R10 Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
D6913-04R09 Test Methods for Particle-Size Distribution (Gradation) of Soils Using Sieve Analysis
D6914-04R10 Practice for Sonic Drilling for Site Characterization and the Installation of Subsurface Monitoring Devices
D6938-10 Test Method for In-Place Density and Water Content of Soil and Soil-Aggregate by Nuclear Methods (Shallow Depth)
D6939-03 Practice for Brushmattressing
D6940-10 Practice for Measuring Sifting Segregation Tendencies of Bulk Solids
D6941-05E01 Practice for Measuring Fluidization Segregation Tendencies of Powders
D7012-10 Test Method for Compressive Strength and Elastic Moduli of Intact Rock Core Specimens under Varying States of Stress and Temperatures
D7013-04E01 Guide for Nuclear Surface Moisture and Density Gauge Calibration Facility Setup
D7014-10 Practice for Assembly and Placement of Double-Twisted Wire Mesh Gabions and Revet Mattresses
D7015-07 Practices for Obtaining Intact Block (Cubical and Cylindrical) Samples of Soils
D7045-04R10 Guide for Optimization of Ground Water Monitoring Constituents for Detection Monitoring Programs for RCRA Waste Disposal Facilities
D7046-04 Guide for Use of the Metal Detection Method for Subsurface Investigation
D7047-04 Test Method for Mucilloid Content of Plantago Insularis (Ovata, Psyllium) Used as a Tackifiers
D7048-04R10 Guide for Applying Statistical Methods for Assessment and Corrective Action Environmental Monitoring Programs
D7069-04R10 Guide for Field Quality Assurance in a Ground-water Sampling Event
D7070-08 Test Methods for Creep of Rock Core Under Constant Stress and Temperature
D7099-04R10 Terminology Relating to Frozen Soil and Rock
D7100-06 Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions
D7101-08 Index Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Soil from Rain Splash and Associated Runoff Under Bench-Scale Conditions
D7128-05R10 Guide for Using the Seismic-Reflection Method for Shallow Subsurface Investigation
D7207-05 Test Method for Determination of Unvegetated Rolled Erosion Control Product (RECP) Ability to Protect Sand from Hydraulically-Induced Shear Stresses under Bench-Scale Conditions
D7208-06 Test Method for Determination of Temporary Ditch Check Performance in Protecting Earthen Channels from Stormwater-Induced Erosion
D7242-06 Practice for Field Pneumatic Slug (Instantaneous Change in Head) Tests to Determine Hydraulic Properties of Aquifers with Direct Push Ground Water Samplers
D7243-06A Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
D7262-10 Test Method for Estimating the Permanganate Natural Oxidant Demand of Soil and Aquifer Solids
D7263-09 Test Methods for Laboratory Determination of Density (Unit Weight) of Soil Specimens
D7276-08 Guide for Analysis and Interpretation of Test Data for Articulating Concrete Block (ACB) Revetment Systems in Open Channel Flow
D7277-08 Test Method for Performance Testing of Articulating Concrete Block (ACB) Revetment Systems for Hydraulic Stability in Open Channel Flow
D7299-06 Practice for Verifying Performance of a Vertical Inclinometer Probe
D7300-06 Test Method for Laboratory Determination of Strength Properties of Frozen Soil at a Constant Rate of Strain
D7322-07 Test Method for Determination of Rolled Erosion Control Product (RECP) Ability to Encourage Seed Germination and Plant Growth Under Bench-Scale Conditions
D7351-07 Test Method for Determination of Sediment Retention Device Effectiveness in Sheet Flow Applications
D7352-07 Practice for Direct Push Technology for Volatile Contaminant Logging with the Membrane Interface Probe (MIP)
D7367-07 Test Method for Determining Water Holding Capacity of Fiber Mulches for Hydraulic Planting
D7380-08 Test Method for Soil Compaction Determination at Shallow Depths Using 5-lb (2.3 kg) Dynamic Cone Penetrometer
D7382-08 Test Methods for Determination of Maximum Dry Unit Weight and Water Content Range for Effective Compaction of Granular Soils Using a Vibrating Hammer
D7383-10 Test Methods for Axial Compressive Force Pulse (Rapid) Testing of Deep Foundations
D7384-10 Practice for Minimum Geospatial Data for a Surface Coal Mining Boundary
D7400-08 Test Methods for Downhole Seismic Testing
D7401-08 Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
D7443-10 Practice for Minimum Geospatial Data for Underground Coal Mining Extents
D7458-08 Test Method for Determination of Beryllium in Soil, Rock, Sediment, and Fly Ash Using Ammonium Bifluoride Extraction and Fluorescence Detection
D7481-09 Test Methods for Determining Loose and Tapped Bulk Densities of Powders using a Graduated Cylinder
D7503-10 Test Method for Measuring the Exchange Complex and Cation Exchange Capacity of Inorganic Fine-Grained Soils
D7533_D7533M-09 Practice for Minimum Geospatial Data for Abandoned Mine Land Problem Area
D7534_D7534M-09 Practice for Minimum Geospatial Data for Abandoned Mine Land Planning Unit
D7608-10 Test Method for Torsional Ring Shear Test to Determine Drained Fully Softened Shear Strength and Nonlinear Strength Envelope of Cohesive Soils (Using Normally Consolidated Specimen) for Slopes with No Preexisting Shear Surfaces
D7609_D7609M-10 Practice for Minimum Geospatial Data for an Abandoned Mine Land Project Site
D7610_D7610M-10 Practice for Minimum Geospatial Data for Abandoned Mine Land Keyword Feature
D7625-10 Test Method for Laboratory Determination of Abrasiveness of Rock Using the CERCHAR Method
D7626-10 Test Methods for Determining the Organic Treat Loading of Organophilic Clay
D7627-10 Practice for Minimum Geospatial Data for Land Reclamation and Performance Bond Status of a Permitted Coal Mine
D7628-10 Practice for Minimum Geospatial Data for Lands Unsuitable for Mining Petitions and Designated Areas
D7629_D7629M-10 Practice for Minimum Geospatial Data for Representing Coal Spoil and Refuse Features
D7630_D7630M-10 Practice for Minimum Geospatial Data for Postmining Land Uses
D7631-10 Practice for Minimum Geospatial Data for a Coal Mining Environmental Resource Monitoring Location
D7664-10 Test Methods for Measurement of Hydraulic Conductivity of Unsaturated Soils