ASTM Volume 04.07, November 2011

    Building Seals and Sealants; Fire Standards; Dimension Stone

    Table of Contents

    C0097_C0097M-09 Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
    C0099_C0099M-09 Test Method for Modulus of Rupture of Dimension Stone
    C0119-11 Terminology Relating to Dimension Stone
    C0120_C0120M-09 Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
    C0121_C0121M-09E01 Test Method for Water Absorption of Slate
    C0170_C0170M-09 Test Method for Compressive Strength of Dimension Stone
    C0217_C0217M-09 Test Method for Weather Resistance of Slate
    C0241_C0241M-09 Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
    C0406_C0406M-10 Specification for Roofing Slate
    C0503_C0503M-10 Specification for Marble Dimension Stone
    C0509-06R11 Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
    C0510-05AR11 Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
    C0542-05R11 Specification for Lock-Strip Gaskets
    C0568_C0568M-10 Specification for Limestone Dimension Stone
    C0603-04R08 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
    C0615_C0615M-11 Specification for Granite Dimension Stone
    C0616_C0616M-10 Specification for Quartz-Based Dimension Stone
    C0629_C0629M-10 Specification for Slate Dimension Stone
    C0639-01R11 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
    C0661-06R11 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
    C0679-03R09E01 Test Method for Tack-Free Time of Elastomeric Sealants
    C0681-03R09 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
    C0711-03R09 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
    C0712-03R09 Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
    C0716-06R11 Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
    C0717-11A Terminology of Building Seals and Sealants
    C0719-93R10 Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
    C0731-00R10 Test Method for Extrudability, After Package Aging, of Latex Sealants
    C0732-06 Test Method for Aging Effects of Artificial Weathering on Latex Sealants
    C0734-06 Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
    C0736-00R06E01 Test Method for Extension-Recovery and Adhesion of Latex Sealants
    C0765-97R07 Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
    C0771-03R09 Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
    C0772-03R09 Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
    C0782-03R09 Test Method for Softness of Preformed Tape Sealants
    C0792-04R08 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
    C0793-05R10 Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
    C0794-10 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
    C0834-10 Specification for Latex Sealants
    C0864-05R11 Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
    C0879-03R09 Test Methods for Release Papers Used with Preformed Tape Sealants
    C0880_C0880M-09 Test Method for Flexural Strength of Dimension Stone
    C0907-03R08 Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
    C0908-00R06 Test Method for Yield Strength of Preformed Tape Sealants
    C0910-06 Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
    C0919-08 Practice for Use of Sealants in Acoustical Applications
    C0920-11 Specification for Elastomeric Joint Sealants
    C0961-06 Test Method for Lap Shear Strength of Sealants
    C0963-00R07 Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
    C0964-07 Guide for Lock-Strip Gasket Glazing
    C0972-00R11 Test Method for Compression-Recovery of Tape Sealant
    C1016-02R08E01 Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
    C1021-08 Practice for Laboratories Engaged in Testing of Building Sealants
    C1083-06R11 Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
    C1087-00R11 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
    C1115-06R11 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
    C1135-00R11 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
    C1166-06R11 Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
    C1183-04R08 Test Method for Extrusion Rate of Elastomeric Sealants
    C1184-05 Specification for Structural Silicone Sealants
    C1193-11 Guide for Use of Joint Sealants
    C1201_C1201M-09 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
    C1216-03R08 Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
    C1241-00R09 Test Method for Volume Shrinkage of Latex Sealants During Cure
    C1242-10 Guide for Selection, Design, and Installation of Dimension Stone Attachment Systems
    C1246-00R06 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
    C1247-09 Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
    C1248-08 Test Method for Staining of Porous Substrate by Joint Sealants
    C1249-06AR10 Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
    C1253-93R09 Test Method for Determining the Outgassing Potential of Sealant Backing
    C1257-06A Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
    C1265-94R05E01 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
    C1266-02R07 Test Method for Flow Characteristics of Preformed Tape Sealants
    C1281-03R09 Specification for Preformed Tape Sealants for Glazing Applications
    C1294-07E01 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
    C1299-03 Guide for Use in Selection of Liquid-Applied Sealants
    C1311-10 Specification for Solvent Release Sealants
    C1330-02R07 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
    C1352_C1352M-09 Test Method for Flexural Modulus of Elasticity of Dimension Stone
    C1353-09 Test Method for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic Using a Rotary Platform, Double-Head Abraser
    C1354_C1354M-09 Test Method for Strength of Individual Stone Anchorages in Dimension Stone
    C1367-06 Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
    C1369-07 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
    C1375-00R09 Guide for Substrates Used in Testing Building Seals and Sealants
    C1382-11 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
    C1392-00R09 Guide for Evaluating Failure of Structural Sealant Glazing
    C1394-03R08 Guide for In-Situ Structural Silicone Glazing Evaluation
    C1401-09A Guide for Structural Sealant Glazing
    C1442-11 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
    C1472-10 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
    C1481-11 Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
    C1487-02R07 Guide for Remedying Structural Silicone Glazing
    C1496-09 Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
    C1501-09 Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
    C1515-09 Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
    C1518-04R09 Specification for Precured Elastomeric Silicone Joint Sealants
    C1519-10 Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
    C1520-02R10 Guide for Paintability of Latex Sealants
    C1521-09E01 Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
    C1523-10 Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
    C1526-08 Specification for Serpentine Dimension Stone
    C1527_C1527M-11 Specification for Travertine Dimension Stone
    C1528-10 Guide for Selection of Dimension Stone
    C1536-10 Test Method for Measuring the Yield for Aerosol Foam Sealants
    C1564-04R09 Guide for Use of Silicone Sealants for Protective Glazing Systems
    C1589-05 Practice for Outdoor Weathering of Construction Seals and Sealants
    C1620-05 Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
    C1635-06 Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
    C1642-07 Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
    C1643-08 Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
    C1681-09 Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
    C1721-09 Guide for Petrographic Examination of Dimension Stone
    C1736-11 Practice for Non-Destructive Evaluation of Adhesion of Installed Weatherproofing Sealant Joints Using a Rolling Device
    C1737-10 Guide for Evaluating Temperature Effects to Aerosol Foam Sealant During and After Dispensing
    C1756-11 Guide for Comparing Sealant Behavior to Reference Photographs
    D2202-00R10 Test Method for Slump of Sealants
    D2203-01R11 Test Method for Staining from Sealants
    D2377-00R08 Test Method for Tack-Free Time of Caulking Compounds and Sealants
    D2452-03R09 Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
    D2453-03R09 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
    D2859-06 Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
    E0084-11A Test Method for Surface Burning Characteristics of Building Materials
    E0108-10A Test Methods for Fire Tests of Roof Coverings
    E0119-11A Test Methods for Fire Tests of Building Construction and Materials
    E0136-11 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750|SDC
    E0162-11A Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
    E0176-10AE01 Terminology of Fire Standards
    E0535-09 Practice for Preparation of Fire-Test-Response Standards
    E0603-07 Guide for Room Fire Experiments
    E0648-10E01 Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
    E0662-09 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
    E0800-07 Guide for Measurement of Gases Present or Generated During Fires
    E0814-11A Test Method for Fire Tests of Penetration Firestop Systems
    E0906_E0906M-10 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
    E0970-10 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
    E1317-08B Test Method for Flammability of Marine Surface Finishes
    E1321-09 Test Method for Determining Material Ignition and Flame Spread Properties
    E1352-08A Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
    E1353-08AE01 Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
    E1354-11A Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
    E1355-11 Guide for Evaluating the Predictive Capability of Deterministic Fire Models
    E1474-10 Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
    E1529-10 Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
    E1537-07 Test Method for Fire Testing of Upholstered Furniture
    E1546-09A Guide for Development of Fire-Hazard-Assessment Standards
    E1590-07 Test Method for Fire Testing of Mattresses
    E1591-07 Guide for Obtaining Data for Deterministic Fire Models
    E1623-11 Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
    E1678-10 Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
    E1725-08 Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
    E1740-10 Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wall Covering or Ceiling Covering Composites Using a Cone Calorimeter
    E1776-07 Guide for Development of Fire-Risk-Assessment Standards
    E1822-09 Test Method for Fire Testing of Stacked Chairs
    E1966-07 Test Method for Fire-Resistive Joint Systems
    E1995-08 Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
    E2032-09 Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
    E2058-09 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
    E2061-09A Guide for Fire Hazard Assessment of Rail Transportation Vehicles
    E2067-08 Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
    E2102-11 Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
    E2187-09 Test Method for Measuring the Ignition Strength of Cigarettes
    E2203-02R08 Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
    E2226-10E01 Practice for Application of Hose Stream
    E2230-08 Practice for Thermal Qualification of Type B Packages for Radioactive Material
    E2231-09 Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
    E2257-08 Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
    E2280-09 Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
    E2307-10 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
    E2335-08 Guide for Laboratory Monitors
    E2336-04R09 Test Methods for Fire Resistive Grease Duct Enclosure Systems
    E2404-10 Practice for Specimen Preparation and Mounting of Textile, Paper or Polymeric (Including Vinyl) Wall or Ceiling Coverings to Assess Surface Burning Characteristics
    E2536-09 Guide for Assessment of Measurement Uncertainty in Fire Tests
    E2573-07A Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
    E2579-07 Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
    E2599-11 Practice for Specimen Preparation and Mounting of Reflective Insulation, Radiant Barrier and Vinyl Stretch Ceiling Materials for Building Applications to Assess Surface Burning Characteristics
    E2652-09A Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750|SDC
    E2653-09 Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories
    E2688-10 Practice for Specimen Preparation and Mounting of Tapes to Assess Surface Burning Characteristics
    E2690-10E02 Practice for Specimen Preparation and Mounting of Caulks and Sealants to Assess Surface Burning Characteristics
    E2707-09 Test Method for Determining Fire Penetration of Exterior Wall Assemblies Using a Direct Flame Impingement Exposure
    E2748-11 Guide for Fire-Resistance Experiments
    E2749-10 Practice for Measuring the Uniformity of Furnace Exposure on Test Specimens
    E2750-11 Guide for Extension of Data For Penetrations Seals
    E2768-11 Test Method for Extended Duration Surface Burning Characteristics of Building Materials (30 min Tunnel Test)
    E2816-11 Test Methods for Fire Resistive Metallic HVAC Duct Systems

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 180
       Pages: 1570

    - 2010
       Standards: 178
       Pages: 1508