ASTM Volume 04.03, June 2011
Road and Paving Materials; Vehicle-Pavement Systems
Return to Previous Page
Table of Contents
D0005-06E01 Test Method for Penetration of Bituminous Materials
D0020-03R09 Test Method for Distillation of Road Tars
D0070-09E01 Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
D0075_D0075M-09 Practice for Sampling Aggregates
D0098-05 Specification for Calcium Chloride
D0113-07 Test Method for Ductility of Bituminous Materials
D0139-07 Test Method for Float Test for Bituminous Materials
D0140_D0140M-09 Practice for Sampling Bituminous Materials
D0242_D0242M-09 Specification for Mineral Filler For Bituminous Paving Mixtures
D0243-08 Test Method for Residue of Specified Penetration
D0244-09 Test Methods and Practices for Emulsified Asphalts
D0345-02R10 Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
D0402-08 Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
D0448-08 Classification for Sizes of Aggregate for Road and Bridge Construction
D0490-92R05 Specification for Road Tar
D0517-98R08 Specification for Asphalt Plank
D0545-08 Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
D0546-10 Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
D0633-97R05 Volume Correction Table for Road Tar
D0692_D0692M-09 Specification for Coarse Aggregate for Bituminous Paving Mixtures
D0946_D0946M-09A Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
D0977-05 Specification for Emulsified Asphalt
D0979-01R06E01 Practice for Sampling Bituminous Paving Mixtures
D0994-98R10 Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
D1073-07 Specification for Fine Aggregate for Bituminous Paving Mixtures
D1074-09 Test Method for Compressive Strength of Bituminous Mixtures
D1075-07 Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
D1139_D1139M-09 Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
D1188-07E01 Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
D1195_D1195M-09 Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1196-93R04 Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
D1369-84R06 Practice for Quantities of Materials for Bituminous Surface Treatments
D1461-85R06 Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
D1560-09A Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
D1561-92R05E01 Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
D1665-98R09 Test Method for Engler Specific Viscosity of Tar Products
D1751-04R08 Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
D1752-04AR08 Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
D1754_D1754M-09 Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
D1856-09 Test Method for Recovery of Asphalt From Solution by Abson Method
D1985-03R08 Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
D2026_D2026M-97R10E01 Specification for Cutback Asphalt (Slow-Curing Type)
D2027_D2027M-10 Specification for Cutback Asphalt (Medium-Curing Type)
D2028_D2028M-10 Specification for Cutback Asphalt (Rapid-Curing Type)
D2041_D2041M-11 Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
D2042-09 Test Method for Solubility of Asphalt Materials in Trichloroethylene
D2170_D2170M-10 Test Method for Kinematic Viscosity of Asphalts (Bitumens)
D2171_D2171M-10 Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
D2172_D2172M-11 Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
D2397-05 Specification for Cationic Emulsified Asphalt
D2399-83R05 Practice for Selection of Cutback Asphalts
D2419-09 Test Method for Sand Equivalent Value of Soils and Fine Aggregate
D2489_D2489M-08 Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
D2493_D2493M-09 Viscosity-Temperature Chart for Asphalts
D2628-91R05 Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
D2726-10 Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
D2728-98R09 Practice for Paving Uses and Application Temperatures for Road Tars
D2835-89R07 Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
D2872-04 Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
D2940_D2940M-09 Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
D2950_D2950M-10 Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
D2995-99R09 Practice for Estimating Application Rate of Bituminous Distributors
D3042-09 Test Method for Insoluble Residue in Carbonate Aggregates
D3141_D3141M-09 Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
D3142-05 Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
D3143-08 Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
D3203-05 Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
D3279-07 Test Method for -Heptane Insolubles
D3289-08 Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
D3319-06 Practice for the Accelerated Polishing of Aggregates Using the British Wheel
D3381_D3381M-09A Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
D3387-83R03 Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
D3398-00R06 Test Method for Index of Aggregate Particle Shape and Texture
D3406-95R06 Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
D3542-08 Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
D3549-03 Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
D3625-96R05 Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
D3628-08 Practice for Selection and Use of Emulsified Asphalts
D3633-98R06 Test Method for Electrical Resistivity of Membrane-Pavement Systems
D3665-07E01 Practice for Random Sampling of Construction Materials
D3666-09A Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
D3744-03 Test Method for Aggregate Durability Index
D3910-07 Practices for Design, Testing, and Construction of Slurry Seal
D3963_D3963M-01R07 Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
D4013-09 Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
D4014-03R07 Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
D4070-08 Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
D4071-84R05 Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
D4124-09 Test Method for Separation of Asphalt into Four Fractions
D4125_D4125M-10 Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
D4215-07 Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
D4280-08 Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
D4311_D4311M-09 Practice for Determining Asphalt Volume Correction to a Base Temperature
D4383-05E01 Specification for Plowable, Raised Retroreflective Pavement Markers
D4460-97R09 Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
D4469-01R06 Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
D4505-05 Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
D4552-92R04 Practice for Classifying Hot-Mix Recycling Agents
D4552_D4552M-10 Practice for Classifying Hot-Mix Recycling Agents
D4561-96R06 Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
D4580-03R07 Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
D4592-05 Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
D4602-93R08 Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
D4694-09 Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
D4695-03R08 Guide for General Pavement Deflection Measurements
D4748-10 Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
D4788-03R07 Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
D4791-10 Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
D4792-00R06 Test Method for Potential Expansion of Aggregates from Hydration Reactions
D4867_D4867M-09 Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
D4887-99R03 Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
D4956-11A Specification for Retroreflective Sheeting for Traffic Control
D4957-08 Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
D5078-95R06 Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
D5106-08 Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
D5148-10 Test Method for Centrifuge Kerosine Equivalent
D5167-10 Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
D5249-10 Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
D5329-09 Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
D5340-10 Test Method for Airport Pavement Condition Index Surveys
D5360-09 Practice for Design and Construction of Bituminous Surface Treatments
D5361-06 Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
D5404-03 Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
D5404_D5404M-11 Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
D5444-08 Test Method for Mechanical Size Analysis of Extracted Aggregate
D5505-06 Practice for Classifying Emulsified Recycling Agents
D5506-08 Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
D5546-09 Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
D5581-07AE01 Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
D5624-02R07 Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
D5710-05 Specification for Trinidad Lake Modified Asphalt
D5711-03 Test Method for Determining the Adherent Coating on Coarse Aggregates
D5801-95R06E01 Test Method for Toughness and Tenacity of Bituminous Materials
D5821-01R06 Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
D5858-96R08 Guide for Calculating Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
D5893_D5893M-10 Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
D5973-97R07 Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
D5977-03R07 Specification for High Load Rotational Spherical Bearings for Bridges and Structures
D6084-06 Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
D6087-08 Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
D6114_D6114M-09 Specification for Asphalt-Rubber Binder
D6153-97R07 Specification for Materials for Bridge Deck Waterproofing Membrane Systems
D6154-09 Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
D6155-06 Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
D6297-01R07 Specification for Asphaltic Plug Joints for Bridges
D6307-10 Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
D6372-05R10 Practice for Design, Testing, and Construction of Micro-Surfacing
D6373-07E01 Specification for Performance Graded Asphalt Binder
D6390-11 Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
D6433-09 Practice for Roads and Parking Lots Pavement Condition Index Surveys
D6521-08 Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
D6607-00R09 Practice for Inclusion of Precision Statement Variation in Specification Limits
D6608-00R06 Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
D6626-09 Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
D6627-01R06 Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
D6628-03R10E01 Specification for Color of Pavement Marking Materials
D6648-08 Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
D6690-07 Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
D6703-07 Test Method for Automated Heithaus Titrimetry
D6704-08 Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
D6752-09 Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
D6857-09 Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
D6924-03R07 Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
D6925-09 Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
D6926-10 Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
D6927-06 Test Method for Marshall Stability and Flow of Bituminous Mixtures
D6928-10 Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
D6929-10 Practice for Freezing of Emulsified Asphalts
D6930-10 Test Method for Settlement and Storage Stability of Emulsified Asphalts
D6931-07 Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
D6932_D6932M-08 Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
D6933-08 Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
D6934-08 Test Method for Residue by Evaporation of Emulsified Asphalt
D6935-04 Test Method for Determining Cement Mixing of Emulsified Asphalt
D6936-09 Test Method for Determining Demulsibility of Emulsified Asphalt
D6937-08 Test Method for Determining Density of Emulsified Asphalt
D6951_D6951M-09 Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
D6995-05 Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
D6997-04 Test Method for Distillation of Emulsified Asphalt
D6998-04 Practice for Evaluating Aggregate Coating using Emulsified Asphalts
D6999-04 Practice for Miscibility of Emulsified Asphalts
D7000-08 Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
D7063-05 Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
D7064_D7064M-08E01 Practice for Open-Graded Friction Course (OGFC) Mix Design
D7113_D7113M-10 Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
D7115-10 Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
D7116-05 Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
D7172-06E01 Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
D7173-05 Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
D7174-05 Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
D7175-08 Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
D7196-06 Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
D7226-10 Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
D7227-06 Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
D7228-06A Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
D7229-08 Test Method for Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
D7312-10 Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
D7313-07A Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
D7369-09 Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
D7370-09 Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
D7402-09 Practice for Identifying Cationic Emulsified Asphalts
D7403-09 Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
D7404-07 Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
D7405-10A Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
D7428-08E01 Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
D7460-10 Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
D7496-09 Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
D7497-09 Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique
D7552-09 Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
D7553-10 Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
D7564_D7564M-09 Practice for Construction of Asphalt-Rubber Cape Seal
D7585_D7585M-10 Practice for Evaluating Retroreflective Pavement Markings Using Portable Hand-Operated Instruments
D7643-10 Practice for Determining the Continuous Grading Temperatures and Continuous Grades for PG Graded Asphalt Binders
E0274_E0274M-11 Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
E0303-93R08 Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
E0445_E0445M-88R08 Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
E0501-08 Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
E0524-08 Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
E0556_E0556M-11 Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
E0660-90R07 Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
E0670-09 Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
E0867-06 Terminology Relating to Vehicle-Pavement Systems
E0950_E0950M-09 Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
E0965-96R06 Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
E1082-90R07 Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
E1166-00R09 Guide for Network Level Pavement Management
E1170-97R07 Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
E1215-93R07 Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
E1274-03R08 Test Method for Measuring Pavement Roughness Using a Profilograph
E1318-09 Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
E1337-90R08 Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
E1364-95R05 Test Method for Measuring Road Roughness by Static Level Method
E1448_E1448M-09 Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
E1489-08 Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
E1551-08 Specification for Special Purpose, Smooth\NTread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
E1656-06 Guide for Classification of Automated Pavement Condition Survey Equipment
E1703_E1703M-10 Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
E1777-09 Guide for Prioritization of Data Needs for Pavement Management
E1778-98AR08 Terminology Relating to Pavement Distress
E1844-08 Specification for A Size 10 |m~ 4\N5 Smooth-Tread Friction Test Tire
E1845-09 Practice for Calculating Pavement Macrotexture Mean Profile Depth
E1859_E1859M-11 Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
E1889-97R09 Guide for Pavement Management Implementation
E1890-11 Guide for Validating New Area Reference Skid Measurement Systems and Equipment
E1911-09AE01 Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
E1926-08 Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
E1927-98R07 Guide for Conducting Subjective Pavement Ride Quality Ratings
E1957-04R10 Practice for Installing and Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
E1960-07 Practice for Calculating International Friction Index of a Pavement Surface
E2034-99R07 Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
E2100-04R10 Practice for Calculating the International Runway Friction Index
E2101-00R05 Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
E2133-03R09 Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
E2157-09 Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
E2213-03R10 Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems \M 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
E2259-03A Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data
E2300-09 Specification for Highway Traffic Monitoring Devices
E2340-06 Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
E2340_E2340M-11 Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
E2341_E2341M-05R09 Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
E2380_E2380M-09 Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
E2415-05 Practice for Installing Piezoelectric Highway Traffic Sensors
E2467-05 Practice for Developing Axle Count Adjustment Factors
E2468-05 Practice for Metadata to Support Archived Data Management Systems
E2532-09 Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
E2560-07 Specification for Data Format for Pavement Profile
E2561-07A Practice for the Installation of Inductive Loop Detectors
E2583-07 Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
E2665-08 Specification for Archiving ITS-Generated Traffic Monitoring Data
E2666-09 Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
E2667-09 Practice for Acquiring Intersection Turning Movement Traffic Data
E2759-10 Practice for Highway Traffic Monitoring Truth-in-Data
E2793-10 Guide for the Evaluation, Calibration, and Correlation of E274 Friction Measurement Systems and Equipment