ASTM Volume 04.01, September 2011

    Cement; Lime; Gypsum

    Table of Contents

    C0005-10 Specification for Quicklime for Structural Purposes
    C0010_C0010M-10 Specification for Natural Cement
    C0011-10A Terminology Relating to Gypsum and Related Building Materials and Systems
    C0022_C0022M-00R10 Specification for Gypsum
    C0025-11 Test Methods for Chemical Analysis of Limestone, Quicklime, and Hydrated Lime
    C0028_C0028M-10 Specification for Gypsum Plasters
    C0035-01R09 Specification for Inorganic Aggregates for Use in Gypsum Plaster
    C0050-00R06 Practice for Sampling, Sample Preparation, Packaging, and Marking of Lime and Limestone Products
    C0051-11 Terminology Relating to Lime and Limestone (as used by the Industry)
    C0059_C0059M-00R11 Specification for Gypsum Casting Plaster and Gypsum Molding Plaster
    C0061_C0061M-00R11 Specification for Gypsum Keene's Cement
    C0091-05 Specification for Masonry Cement
    C0109_C0109M-11 Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or \[50-mm\] Cube Specimens)
    C0110-10 Test Methods for Physical Testing of Quicklime, Hydrated Lime, and Limestone
    C0114-11A Test Methods for Chemical Analysis of Hydraulic Cement
    C0115-10 Test Method for Fineness of Portland Cement by the Turbidimeter
    C0141_C0141M-09 Specification for Hydrated Hydraulic Lime for Structural Purposes
    C0150_C0150M-11 Specification for Portland Cement
    C0151_C0151M-09 Test Method for Autoclave Expansion of Hydraulic Cement
    C0183-08 Practice for Sampling and the Amount of Testing of Hydraulic Cement
    C0185-08 Test Method for Air Content of Hydraulic Cement Mortar
    C0186-05 Test Method for Heat of Hydration of Hydraulic Cement
    C0187-11 Test Method for Amount of Water Required for Normal Consistency of Hydraulic Cement Paste
    C0188-09 Test Method for Density of Hydraulic Cement
    C0191-08 Test Methods for Time of Setting of Hydraulic Cement by Vicat Needle
    C0204-07 Test Methods for Fineness of Hydraulic Cement by Air-Permeability Apparatus
    C0206-03R09 Specification for Finishing Hydrated Lime
    C0207-06R11 Specification for Hydrated Lime for Masonry Purposes
    C0219-07A Terminology Relating to Hydraulic Cement
    C0226-07 Specification for Air-Entraining Additions for Use in the Manufacture of Air-Entraining Hydraulic Cement
    C0230_C0230M-08 Specification for Flow Table for Use in Tests of Hydraulic Cement
    C0265-08 Test Method for Water-Extractable Sulfate in Hydrated Hydraulic Cement Mortar
    C0266-08E01 Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
    C0305-11 Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency
    C0317_C0317M-00R10 Specification for Gypsum Concrete
    C0318_C0318M-00R10 Specification for Gypsum Formboard
    C0348-08 Test Method for Flexural Strength of Hydraulic-Cement Mortars
    C0349-08 Test Method for Compressive Strength of Hydraulic-Cement Mortars (Using Portions of Prisms Broken in Flexure)
    C0359-08 Test Method for Early Stiffening of Hydraulic Cement (Mortar Method)
    C0400-98R06 Test Methods for Quicklime and Hydrated Lime for Neutralization of Waste Acid
    C0430-08 Test Method for Fineness of Hydraulic Cement by the 45-|gmm (No. 325) Sieve
    C0451-08 Test Method for Early Stiffening of Hydraulic Cement (Paste Method)
    C0452_C0452M-10 Test Method for Potential Expansion of Portland-Cement Mortars Exposed to Sulfate
    C0465-10 Specification for Processing Additions for Use in the Manufacture of Hydraulic Cements
    C0471M-01R06E01 Test Methods for Chemical Analysis of Gypsum and Gypsum Products (Metric)
    C0472-99R09 Test Methods for Physical Testing of Gypsum, Gypsum Plasters and Gypsum Concrete
    C0473-10 Test Methods for Physical Testing of Gypsum Panel Products
    C0474-11 Test Methods for Joint Treatment Materials for Gypsum Board Construction
    C0475_C0475M-02R07 Specification for Joint Compound and Joint Tape for Finishing Gypsum Board
    C0490_C0490M-10 Practice for Use of Apparatus for the Determination of Length Change of Hardened Cement Paste, Mortar, and Concrete
    C0511-09 Specification for Mixing Rooms, Moist Cabinets, Moist Rooms, and Water Storage Tanks Used in the Testing of Hydraulic Cements and Concretes
    C0514-04R09E01 Specification for Nails for the Application of Gypsum Board
    C0563-07 Test Method for Approximation of Optimum SO3 in Hydraulic Cement Using Compressive Strength
    C0587-04R09 Specification for Gypsum Veneer Plaster
    C0593-06R11 Specification for Fly Ash and Other Pozzolans for Use With Lime for Soil Stabilization
    C0595_C0595M-11 Specification for Blended Hydraulic Cements
    C0596-09 Test Method for Drying Shrinkage of Mortar Containing Hydraulic Cement
    C0602-07 Specification for Agricultural Liming Materials
    C0631-09 Specification for Bonding Compounds for Interior Gypsum Plastering
    C0645-11 Specification for Nonstructural Steel Framing Members
    C0688-08 Specification for Functional Additions for Use in Hydraulic Cements
    C0706-02R08E01 Specification for Limestone for Animal Feed Use
    C0737-08 Specification for Limestone for Dusting of Coal Mines
    C0754-09A Specification for Installation of Steel Framing Members to Receive Screw-Attached Gypsum Panel Products
    C0778-06 Specification for Standard Sand
    C0786_C0786M-10 Test Method for Fineness of Hydraulic Cement and Raw Materials by the 300-|gmm (No. 50), 150-|gmm (No. 100), and 75-|gmm (No. 200) Sieves by Wet Methods
    C0806-04 Test Method for Restrained Expansion of Expansive Cement Mortar
    C0807-08 Test Method for Time of Setting of Hydraulic Cement Mortar by Modified Vicat Needle
    C0821-09 Specification for Lime for Use with Pozzolans
    C0840-08 Specification for Application and Finishing of Gypsum Board
    C0841-03R08E01 Specification for Installation of Interior Lathing and Furring
    C0842-05R10E01 Specification for Application of Interior Gypsum Plaster
    C0843-99R06 Specification for Application of Gypsum Veneer Plaster
    C0844-04R10 Specification for Application of Gypsum Base to Receive Gypsum Veneer Plaster
    C0845-04 Specification for Expansive Hydraulic Cement
    C0847-10A Specification for Metal Lath
    C0897-05R09 Specification for Aggregate for Job-Mixed Portland Cement-Based Plasters
    C0911-06R11 Specification for Quicklime, Hydrated Lime, and Limestone for Selected Chemical and Industrial Uses
    C0917-05R11 Test Method for Evaluation of Cement Strength Uniformity From a Single Source
    C0926-11 Specification for Application of Portland Cement-Based Plaster
    C0932-06 Specification for Surface-Applied Bonding Compounds for Exterior Plastering
    C0933-09 Specification for Welded Wire Lath
    C0954-10 Specification for Steel Drill Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Steel Studs from 0.033 in. (0.84 mm) to 0.112 in. (2.84 mm) in Thickness
    C0955-11 Specification for Load-Bearing (Transverse and Axial) Steel Studs, Runners (Tracks), and Bracing or Bridging for Screw Application of Gypsum Panel Products and Metal Plaster Bases
    C0956-04R10 Specification for Installation of Cast-In-Place Reinforced Gypsum Concrete
    C0977-10 Specification for Quicklime and Hydrated Lime for Soil Stabilization
    C1002-07 Specification for Steel Self-Piercing Tapping Screws for the Application of Gypsum Panel Products or Metal Plaster Bases to Wood Studs or Steel Studs
    C1005-10 Specification for Reference Masses and Devices for Determining Mass and Volume for Use in the Physical Testing of Hydraulic Cements
    C1007-11 Specification for Installation of Load Bearing (Transverse and Axial) Steel Studs and Related Accessories
    C1012_C1012M-10 Test Method for Length Change of Hydraulic-Cement Mortars Exposed to a Sulfate Solution
    C1032-06 Specification for Woven Wire Plaster Base
    C1038_C1038M-10 Test Method for Expansion of Hydraulic Cement Mortar Bars Stored in Water
    C1047-10A Specification for Accessories for Gypsum Wallboard and Gypsum Veneer Base
    C1063-08 Specification for Installation of Lathing and Furring to Receive Interior and Exterior Portland Cement-Based Plaster
    C1097-07 Specification for Hydrated Lime for Use in Asphalt Cement or Bituminous Pavements
    C1157_C1157M-10 Performance Specification for Hydraulic Cement
    C1164-92R09 Practice for Evaluation of Limestone or Lime Uniformity From a Single Source
    C1177_C1177M-08 Specification for Glass Mat Gypsum Substrate for Use as Sheathing
    C1178_C1178M-08 Specification for Coated Glass Mat Water-Resistant Gypsum Backing Panel
    C1222-09 Practice for Evaluation of Laboratories Testing Hydraulic Cement
    C1264-05R11 Specification for Sampling, Inspection, Rejection, Certification, Packaging, Marking, Shipping, Handling, and Storage of Gypsum Panel Products
    C1271-99R06 Test Method for X-ray Spectrometric Analysis of Lime and Limestone
    C1278_C1278M-07A Specification for Fiber-Reinforced Gypsum Panel
    C1280-09 Specification for Application of Gypsum Sheathing
    C1301-95R09E01 Test Method for Major and Trace Elements in Limestone and Lime by Inductively Coupled Plasma-Atomic Emission Spectroscopy (ICP) and Atomic Absorption (AA)
    C1318-95R09E01 Test Method for Determination of Total Neutralizing Capability and Dissolved Calcium and Magnesium Oxide in Lime for Flue Gas Desulfurization (FGD)
    C1328-05 Specification for Plastic (Stucco) Cement
    C1329-05 Specification for Mortar Cement
    C1355_C1355M-96R06 Specification for Glass Fiber Reinforced Gypsum Composites
    C1356-07 Test Method for Quantitative Determination of Phases in Portland Cement Clinker by Microscopical Point-Count Procedure
    C1365-06 Test Method for Determination of the Proportion of Phases in Portland Cement and Portland-Cement Clinker Using X-Ray Powder Diffraction Analysis
    C1381_C1381M-97R08E01 Specification for Molded Glass Fiber Reinforced Gypsum Parts
    C1396_C1396M-11 Specification for Gypsum Board
    C1397-09 Practice for Application of Class PB Exterior Insulation and Finish Systems (EIFS) and EIFS with Drainage
    C1437-07 Test Method for Flow of Hydraulic Cement Mortar
    C1467_C1467M-00R06 Specification for the Installation of Molded Glass Fiber Reinforced Gypsum Parts
    C1489-01R08E01 Specification for Lime Putty for Structural Purposes
    C1506-09 Test Method for Water Retention of Hydraulic Cement-Based Mortars and Plasters
    C1513-10 Specification for Steel Tapping Screws for Cold-Formed Steel Framing Connections
    C1516-05 Practice for Application of Direct-Applied Exterior Finish Systems
    C1529-06AR11 Specification for Quicklime, Hydrated Lime, and Limestone for Environmental Uses
    C1535-05 Practice for Application of Exterior Insulation and Finish Systems Class PI
    C1546-02R08E01 Guide for Installation of Gypsum Products in Concealed Radiant Ceiling Heating Systems
    C1565-09 Test Method for Determination of Pack-Set Index of Portland Cement
    C1597M-04R09E01 Specification for Gypsum Wallboard (Hard Metric Sizes)
    C1600_C1600M-11 Specification for Rapid Hardening Hydraulic Cement
    C1608-07 Test Method for Chemical Shrinkage of Hydraulic Cement Paste
    C1629_C1629M-06R11 Classification for Abuse-Resistant Nondecorated Interior Gypsum Panel Products and Fiber-Reinforced Cement Panels
    C1658_C1658M-06 Specification for Glass Mat Gypsum Panels
    C1702-09A Test Method for Measurement of Heat of Hydration of Hydraulic Cementitious Materials Using Isothermal Conduction Calorimetry
    C1707-10 Specification for Pozzolanic Hydraulic Lime for Structural Purposes
    C1738-11 Practice for High-Shear Mixing of Hydraulic Cement Pastes
    D6249-06R11 Guide for Alkaline Stabilization of Wastewater Treatment Plant Residuals

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 133
       Pages: 760

    - 2010
       Standards: 132
       Pages: 752