ASTM Volume 03.01, July 2011

    Metals -- Mechanical Testing; Elevated and Low-Temperature Tests; Metallography

    Table of Contents

    E0003-01R07E01 Guide for Preparation of Metallographic Specimens
    E0004-10 Practices for Force Verification of Testing Machines
    E0006-09BE01 Terminology Relating to Methods of Mechanical Testing
    E0007-03R09 Terminology Relating to Metallography
    E0008_E0008M-09 Test Methods for Tension Testing of Metallic Materials
    E0009-09 Test Methods of Compression Testing of Metallic Materials at Room Temperature
    E0010-10 Test Method for Brinell Hardness of Metallic Materials
    E0018-08B Test Methods for Rockwell Hardness of Metallic Materials
    E0021-09 Test Methods for Elevated Temperature Tension Tests of Metallic Materials
    E0023-07AE01 Test Methods for Notched Bar Impact Testing of Metallic Materials
    E0045-10E01 Test Methods for Determining the Inclusion Content of Steel
    E0074-06 Practice of Calibration of Force-Measuring Instruments for Verifying the Force Indication of Testing Machines
    E0081-96R07 Test Method for Preparing Quantitative Pole Figures
    E0082-09 Test Method for Determining the Orientation of a Metal Crystal
    E0083-10A Practice for Verification and Classification of Extensometer Systems
    E0103-84R02 Test Method for Rapid Indentation Hardness Testing of Metallic Materials
    E0110-10 Test Method for Indentation Hardness of Metallic Materials by Portable Hardness Testers
    E0111-04R10 Test Method for Young's Modulus, Tangent Modulus, and Chord Modulus
    E0112-10 Test Methods for Determining Average Grain Size
    E0132-04R10 Test Method for Poisson's Ratio at Room Temperature
    E0139-06 Test Methods for Conducting Creep, Creep-Rupture, and Stress-Rupture Tests of Metallic Materials
    E0140-07 Hardness Conversion Tables for Metals Relationship Among Brinell Hardness, Vickers Hardness, Rockwell Hardness, Superficial Hardness, Knoop Hardness, and Scleroscope Hardness
    E0143-02R08 Test Method for Shear Modulus at Room Temperature
    E0190-92R08 Test Method for Guided Bend Test for Ductility of Welds
    E0208-06 Test Method for Conducting Drop-Weight Test to Determine Nil-Ductility Transition Temperature of Ferritic Steels
    E0209-00R10 Practice for Compression Tests of Metallic Materials at Elevated Temperatures with Conventional or Rapid Heating Rates and Strain Rates
    E0238-84R08 Test Method for Pin-Type Bearing Test of Metallic Materials
    E0251-92R09 Test Methods for Performance Characteristics of Metallic Bonded Resistance Strain Gauges
    E0290-09 Test Methods for Bend Testing of Material for Ductility
    E0292-09E01 Test Methods for Conducting Time-for-Rupture Notch Tension Tests of Materials
    E0328-02R08 Test Methods for Stress Relaxation for Materials and Structures
    E0340-00R06 Test Method for Macroetching Metals and Alloys
    E0345-93R08 Test Methods of Tension Testing of Metallic Foil
    E0381-01R06 Method of Macroetch Testing Steel Bars, Billets, Blooms, and Forgings
    E0384-10E02 Test Method for Knoop and Vickers Hardness of Materials
    E0399-09E02 Test Method for Linear-Elastic Plane-Strain Fracture Toughness Ic of Metallic Materials
    E0407-07E01 Practice for Microetching Metals and Alloys
    E0436-03R08 Test Method for Drop-Weight Tear Tests of Ferritic Steels
    E0448-82R08 Practice for Scleroscope Hardness Testing of Metallic Materials
    E0466-07 Practice for Conducting Force Controlled Constant Amplitude Axial Fatigue Tests of Metallic Materials
    E0467-08 Practice for Verification of Constant Amplitude Dynamic Forces in an Axial Fatigue Testing System
    E0468-90R04E01 Practice for Presentation of Constant Amplitude Fatigue Test Results for Metallic Materials
    E0517-00R10 Test Method for Plastic Strain Ratio for Sheet Metal
    E0561-10 Test Method for Curve Determination
    E0562-08 Test Method for Determining Volume Fraction by Systematic Manual Point Count
    E0604-83R08 Test Method for Dynamic Tear Testing of Metallic Materials
    E0606-04E01 Practice for Strain-Controlled Fatigue Testing
    E0633-00R05 Guide for Use of Thermocouples in Creep and Stress-Rupture Testing to 1800|SDF (1000|SDC) in Air
    E0643-09 Test Method for Ball Punch Deformation of Metallic Sheet Material
    E0646-07 Test Method for Tensile Strain-Hardening Exponents ( -Values) of Metallic Sheet Materials
    E0647-08E01 Test Method for Measurement of Fatigue Crack Growth Rates
    E0739-10 Practice for Statistical Analysis of Linear or Linearized Stress-Life () and Strain-Life (|g@-) Fatigue Data
    E0740_E0740M-03R10E01 Practice for Fracture Testing with Surface-Crack Tension Specimens
    E0766-98R08E01 Practice for Calibrating the Magnification of a Scanning Electron Microscope
    E0768-99R10 Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
    E0837-08E01 Test Method for Determining Residual Stresses by the Hole-Drilling Strain-Gage Method
    E0855-08 Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading
    E0883-02R07 Guide for Reflected\NLight Photomicrography
    E0915-10 Test Method for Verifying the Alignment of X-Ray Diffraction Instrumentation for Residual Stress Measurement
    E0930-99R07 Test Methods for Estimating the Largest Grain Observed in a Metallographic Section (ALA Grain Size)
    E0963-95R10 Practice for Electrolytic Extraction of Phases from Ni and Ni-Fe Base Superalloys Using a Hydrochloric-Methanol Electrolyte
    E0975-03R08 Practice for X-Ray Determination of Retained Austenite in Steel with Near Random Crystallographic Orientation
    E0986-04R10 Practice for Scanning Electron Microscope Beam Size Characterization
    E1012-05 Practice for Verification of Test Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
    E1049-85R05 Practices for Cycle Counting in Fatigue Analysis
    E1077-01R05 Test Methods for Estimating the Depth of Decarburization of Steel Specimens
    E1180-08 Practice for Preparing Sulfur Prints for Macrostructural Evaluation
    E1181-02R08 Test Methods for Characterizing Duplex Grain Sizes
    E1221-10 Test Method for Determining Plane-Strain Crack-Arrest Fracture Toughness, Ia, of Ferritic Steels
    E1237-93R09 Guide for Installing Bonded Resistance Strain Gages
    E1245-03R08 Practice for Determining the Inclusion or Second-Phase Constituent Content of Metals by Automatic Image Analysis
    E1268-01R07 Practice for Assessing the Degree of Banding or Orientation of Microstructures
    E1290-08E01 Test Method for Crack-Tip Opening Displacement (CTOD) Fracture Toughness Measurement
    E1304-97R08E01 Test Method for Plane-Strain (Chevron-Notch) Fracture Toughness of Metallic Materials
    E1319-98R09 Guide for High-Temperature Static Strain Measurement
    E1351-01R06 Practice for Production and Evaluation of Field Metallographic Replicas
    E1382-97R10 Test Methods for Determining Average Grain Size Using Semiautomatic and Automatic Image Analysis
    E1426-98R09E01 Test Method for Determining the Effective Elastic Parameter for X-Ray Diffraction Measurements of Residual Stress
    E1450-09 Test Method for Tension Testing of Structural Alloys in Liquid Helium
    E1457-07E03 Test Method for Measurement of Creep Crack Growth Times in Metals
    E1508-98R08 Guide for Quantitative Analysis by Energy-Dispersive Spectroscopy
    E1544-99R04E01 Practice for Construction of a Stepped Block and Its Use to Estimate Errors Produced by Speed-of-Sound Measurement Systems for Use on Solids
    E1558-09 Guide for Electrolytic Polishing of Metallographic Specimens
    E1561-93R09 Practice for Analysis of Strain Gage Rosette Data
    E1681-03R08E01 Test Method for Determining Threshold Stress Intensity Factor for Environment-Assisted Cracking of Metallic Materials
    E1685-00R06 Practice for Measuring the Change in Length of Fasteners Using the Ultrasonic Pulse-Echo Technique
    E1820-09E01 Test Method for Measurement of Fracture Toughness
    E1823-10A Terminology Relating to Fatigue and Fracture Testing
    E1856-97R08 Guide for Evaluating Computerized Data Acquisition Systems Used to Acquire Data from Universal Testing Machines
    E1875-08 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Sonic Resonance
    E1876-09 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio by Impulse Excitation of Vibration
    E1920-03R08 Guide for Metallographic Preparation of Thermal Sprayed Coatings
    E1921-10E01 Test Method for Determination of Reference Temperature, o, for Ferritic Steels in the Transition Range
    E1922-04R10E01 Test Method for Translaminar Fracture Toughness of Laminated and Pultruded Polymer Matrix Composite Materials
    E1928-07 Practice for Estimating the Approximate Residual Circumferential Stress in Straight Thin-walled Tubing
    E1942-98R10 Guide for Evaluating Data Acquisition Systems Used in Cyclic Fatigue and Fracture Mechanics Testing
    E1949-03R09 Test Method for Ambient Temperature Fatigue Life of Metallic Bonded Resistance Strain Gages
    E1951-02R07 Guide for Calibrating Reticles and Light Microscope Magnifications
    E2014-99R05 Guide on Metallographic Laboratory Safety
    E2015-04R09 Guide for Preparation of Plastics and Polymeric Specimens for Microstructural Examination
    E2109-01R07 Test Methods for Determining Area Percentage Porosity in Thermal Sprayed Coatings
    E2142-08 Test Methods for Rating and Classifying Inclusions in Steel Using the Scanning Electron Microscope
    E2207-08 Practice for Strain-Controlled Axial-Torsional Fatigue Testing with Thin-Walled Tubular Specimens
    E2208-02R10 Guide for Evaluating Non-Contacting Optical Strain Measurement Systems
    E2218-02R08 Test Method for Determining Forming Limit Curves
    E2244-05 Test Method for In-Plane Length Measurements of Thin, Reflecting Films Using an Optical Interferometer
    E2245-05 Test Method for Residual Strain Measurements of Thin, Reflecting Films Using an Optical Interferometer
    E2246-05 Test Method for Strain Gradient Measurements of Thin, Reflecting Films Using an Optical Interferometer
    E2248-09 Test Method for Impact Testing of Miniaturized Charpy V-Notch Specimens
    E2283-08 Practice for Extreme Value Analysis of Nonmetallic Inclusions in Steel and Other Microstructural Features
    E2298-09 Test Method for Instrumented Impact Testing of Metallic Materials
    E2309_E2309M-05R11E01 Practices for Verification of Displacement Measuring Systems and Devices Used in Material Testing Machines
    E2368-10 Practice for Strain Controlled Thermomechanical Fatigue Testing
    E2428-08 Practice for Calibration of Torque-Measuring Instruments for Verifying the Torque Indication of Torque Testing Machines
    E2443-05R10 Guide for Verifying Computer-Generated Test Results Through The Use Of Standard Data Sets
    E2444-05E01 Terminology Relating to Measurements Taken on Thin, Reflecting Films
    E2448-08 Test Method for Determining the Superplastic Properties of Metallic Sheet Materials
    E2472-06E01 Test Method for Determination of Resistance to Stable Crack Extension under Low-Constraint Conditions
    E2492-07 Test Method for Evaluating Springback of Sheet Metal Using the Demeri Split Ring Test
    E2546-07 Practice for Instrumented Indentation Testing
    E2567-11 Test Method for Determining Nodularity And Nodule Count In Ductile Iron Using Image Analysis
    E2624-09 Practice for Torque Calibration of Testing Machines and Devices
    E2627-10 Practice for Determining Average Grain Size Using Electron Backscatter Diffraction (EBSD) in Fully Recrystallized Polycrystalline Materials
    E2658-11 Practices for Verification of Speed for Material Testing Machines
    E2712-09E01 Test Methods for Bulge-Forming Superplastic Metallic Sheet
    E2714-09 Test Method for Creep-Fatigue Testing
    E2760-10 Test Method for Creep-Fatigue Crack Growth Testing
    E2789-10 Guide for Fretting Fatigue Testing

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 129
       Pages: 1612

    - 2010
       Standards: 126
       Pages: 1570