ASTM Volume 01.06, February 2011

    Coated Steel Products

    Table of Contents

    A0090_A0090M-09 Test Method for Weight \[Mass\] of Coating on Iron and Steel Articles with Zinc or Zinc-Alloy Coatings
    A0111-99AR09 Specification for Zinc-Coated (Galvanized) |P`Iron|P' Telephone and Telegraph Line Wire
    A0116-05 Specification for Metallic-Coated, Steel-Woven Wire Fence Fabric
    A0121-07 Specification for Metallic-Coated Carbon Steel Barbed Wire
    A0123_A0123M-09 Specification for Zinc (Hot-Dip Galvanized) Coatings on Iron and Steel Products
    A0143_A0143M-07 Practice for Safeguarding Against Embrittlement of Hot-Dip Galvanized Structural Steel Products and Procedure for Detecting Embrittlement
    A0153_A0153M-09 Specification for Zinc Coating (Hot-Dip) on Iron and Steel Hardware
    A0239-95R09E01 Practice for Locating the Thinnest Spot in a Zinc (Galvanized) Coating on Iron or Steel Articles,
    A0308_A0308M-10 Specification for Steel Sheet, Terne (Lead-Tin Alloy) Coated by the Hot-Dip Process
    A0309-01R07 Test Method for Weight and Composition of Coating on Terne Sheet by the Triple-Spot Test
    A0363-03R09E01 Specification for Zinc-Coated (Galvanized) Steel Overhead Ground Wire Strand
    A0384_A0384M-07 Practice for Safeguarding Against Warpage and Distortion During Hot-Dip Galvanizing of Steel Assemblies
    A0385_A0385M-09 Practice for Providing High-Quality Zinc Coatings (Hot-Dip)
    A0390-06 Specification for Zinc-Coated (Galvanized) Steel Poultry Fence Fabric (Hexagonal and Straight Line)
    A0392-07 Specification for Zinc-Coated Steel Chain-Link Fence Fabric
    A0411-08 Specification for Zinc-Coated (Galvanized) Low-Carbon Steel Armor Wire
    A0428_A0428M-10 Test Method for Weight \[Mass\] of Coating on Aluminum-Coated Iron or Steel Articles
    A0459-08 Specification for Zinc-Coated Flat Steel Armoring Tape
    A0460-94R04E01 Specification for Copper-Clad Steel Wire Strand
    A0463_A0463M-09A Specification for Steel Sheet, Aluminum-Coated, by the Hot-Dip Process
    A0474-03R08 Specification for Aluminum-Coated Steel Wire Strand
    A0475-03R09E01 Specification for Zinc-Coated Steel Wire Strand
    A0491-10 Specification for Aluminum-Coated Steel Chain-Link Fence Fabric
    A0586-04AR09E01 Specification for Zinc-Coated Parallel and Helical Steel Wire Structural Strand
    A0599_A0599M-07 Specification for Tin Mill Products, Electrolytic Tin-Coated, Cold-Rolled Sheet
    A0603-98R09E01 Specification for Zinc-Coated Steel Structural Wire Rope
    A0623-10 Specification for Tin Mill Products, General Requirements
    A0623M-10 Specification for Tin Mill Products, General Requirements \[Metric\]
    A0624_A0624M-03R08E01 Specification for Tin Mill Products, Electrolytic Tin Plate, Single Reduced
    A0625_A0625M-08 Specification for Tin Mill Products, Black Plate, Single-Reduced
    A0626_A0626M-03R08E01 Specification for Tin Mill Products, Electrolytic Tin Plate, Double Reduced
    A0630-03R09 Test Methods for Determination of Tin Coating Weights for Electrolytic Tin Plate
    A0640-97R09E01 Specification for Zinc-Coated Steel Strand for Messenger Support of Figure 8 Cable
    A0641_A0641M-09A Specification for Zinc\NCoated (Galvanized) Carbon Steel Wire
    A0650_A0650M-03R08 Specification for Tin Mill Products, Black Plate, Double Reduced
    A0653_A0653M-09A Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy-Coated (Galvannealed) by the Hot-Dip Process
    A0657_A0657M-03R08E01 Specification for Tin Mill Products, Black Plate Electrolytic Chromium-Coated, Single and Double Reduced
    A0740-98R08 Specification for Hardware Cloth (Woven or Welded Galvanized Steel Wire Fabric)
    A0741-98R09E01 Specification for Zinc-Coated Steel Wire Rope and Fittings for Highway Guardrail
    A0742_A0742M-03R08 Specification for Steel Sheet, Metallic Coated and Polymer Precoated for Corrugated Steel Pipe
    A0754_A0754M-08 Test Method for Coating Weight (Mass) of Metallic Coatings on Steel by X-Ray Fluorescence
    A0755_A0755M-03R08 Specification for Steel Sheet, Metallic Coated by the Hot-Dip Process and Prepainted by the Coil-Coating Process for Exterior Exposed Building Products
    A0760_A0760M-10 Specification for Corrugated Steel Pipe, Metallic-Coated for Sewers and Drains
    A0761_A0761M-04R09 Specification for Corrugated Steel Structural Plate, Zinc-Coated, for Field-Bolted Pipe, Pipe-Arches, and Arches
    A0762_A0762M-08 Specification for Corrugated Steel Pipe, Polymer Precoated for Sewers and Drains
    A0780_A0780M-09 Practice for Repair of Damaged and Uncoated Areas of Hot-Dip Galvanized Coatings
    A0792_A0792M-09A Specification for Steel Sheet, 55 \% Aluminum-Zinc Alloy-Coated by the Hot-Dip Process
    A0796_A0796M-06 Practice for Structural Design of Corrugated Steel Pipe, Pipe-Arches, and Arches for Storm and Sanitary Sewers and Other Buried Applications
    A0798_A0798M-07 Practice for Installing Factory-Made Corrugated Steel Pipe for Sewers and Other Applications
    A0807_A0807M-02R08 Practice for Installing Corrugated Steel Structural Plate Pipe for Sewers and Other Applications
    A0809-08 Specification for Aluminum-Coated (Aluminized) Carbon Steel Wire
    A0810-01R09E01 Specification for Zinc-Coated (Galvanized) Steel Pipe Winding Mesh
    A0817-07 Specification for Metallic-Coated Steel Wire for Chain-Link Fence Fabric and Marcelled Tension Wire
    A0818-06 Specification for Coppered Carbon Steel Wire
    A0824-01R07 Specification for Metallic-Coated Steel Marcelled Tension Wire for Use With Chain Link Fence
    A0849-00R05 Specification for Post-Applied Coatings, Pavings, and Linings for Corrugated Steel Sewer and Drainage Pipe
    A0854_A0854M-08 Specification for Metallic-Coated Steel Smooth High-Tensile Fence and Trellis Wire
    A0855_A0855M-03R09 Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Wire Strand
    A0856_A0856M-03R09 Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Carbon Steel Wire
    A0862_A0862M-98R08 Practice for Application of Asphalt Coatings to Corrugated Steel Sewer and Drainage Pipe
    A0875_A0875M-09A Specification for Steel Sheet, Zinc-5 \% Aluminum Alloy-Coated by the Hot-Dip Process
    A0879_A0879M-06 Specification for Steel Sheet, Zinc Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
    A0896_A0896M-09 Practice for Conducting Case Studies on Galvanized Structures
    A0902-09 Terminology Relating to Metallic Coated Steel Products
    A0917-08 Specification for Steel Sheet, Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface (General Requirements)
    A0918-06 Specification for Steel Sheet, Zinc-Nickel Alloy Coated by the Electrolytic Process for Applications Requiring Designation of the Coating Mass on Each Surface
    A0924_A0924M-10 Specification for General Requirements for Steel Sheet, Metallic-Coated by the Hot-Dip Process
    A0925-03R09E01 Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Overhead Ground Wire Strand
    A0926-03R08 Test Method for Comparing the Abrasion Resistance of Coating Materials for Corrugated Metal Pipe
    A0929_A0929M-01R07 Specification for Steel Sheet, Metallic-Coated by the Hot-Dip Process for Corrugated Steel Pipe
    A0930-09 Practice for Life-Cycle Cost Analysis of Corrugated Metal Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
    A0964_A0964M-03 Specification for Corrugated Steel Box Culverts
    A0974-97R03 Specification for Welded Wire Fabric Gabions and Gabion Mattresses (Metallic-Coated or Polyvinyl Chloride (PVC) Coated)
    A0975-97R03 Specification for Double\NTwisted Hexagonal Mesh Gabions and Revet Mattresses (Metallic\NCoated Steel Wire or Metallic-Coated Steel Wire With Poly(Vinyl Chloride) (PVC) Coating)
    A0978_A0978M-08 Specification for Composite Ribbed Steel Pipe, Precoated and Polyethylene Lined for Gravity Flow Sanitary Sewers, Storm Sewers, and Other Special Applications
    A0979_A0979M-03R09 Specification for Concrete Pavements and Linings Installed in Corrugated Steel Structures in the Field
    A0987_A0987M-09 Practice for Measuring Shape Characteristics of Tin Mill Products
    A0998_A0998M-08 Practice for Structural Design of Reinforcements for Fittings in Factory\NMade Corrugated Steel Pipe for Sewers and Other Applications
    A1003_A1003M-10 Specification for Steel Sheet, Carbon, Metallic- and Nonmetallic-Coated for Cold-Formed Framing Members
    A1004_A1004M-99R09 Practice for Establishing Conformance to the Minimum Expected Corrosion Characteristics of Metallic, Painted-Metallic, and Nonmetallic-Coated Steel Sheet Intended for Use as Cold Formed Framing Members
    A1019_A1019M-01R07 Specification for Closed Rib Steel Pipe with Diameter of 36 in. \[900 mm\] or Less, Polymer Precoated for Sewers and Drains
    A1030_A1030M-05 Practice for Measuring Flatness Characteristics of Steel Sheet Products
    A1042_A1042M-04R09 Specification for Composite Corrugated Steel Pipe for Sewers and Drains
    A1046_A1046M-10 Specification for Steel Sheet, Zinc-Aluminum-Magnesium Alloy-Coated by the Hot-Dip Process
    A1057_A1057M-08 Specification for Steel, Structural Tubing, Cold Formed, Welded, Carbon, Zinc-Coated (Galvanized) by the Hot-Dip Process
    A1059_A1059M-08 Specification for Zinc Alloy Thermo-Diffusion Coatings (TDC) on Steel Fasteners, Hardware, and Other Products
    A1063_A1063M-09 Specification for Steel Sheet, Twin-Roll Cast, Zinc-Coated (Galvanized) by the Hot-Dip Process
    F0537-01R07 Specification for Design, Fabrication, and Installation of Fences Constructed of Wood and Related Materials
    F0552-02R08 Terminology Relating to Chain Link Fencing
    F0567-07 Practice for Installation of Chain-Link Fence
    F0626-08 Specification for Fence Fittings
    F0654-07 Specification for Residential Chain Link Fence Gates
    F0668-07 Specification for Polyvinyl Chloride (PVC) and Other Organic Polymer-Coated Steel Chain-Link Fence Fabric
    F0900-05 Specification for Industrial and Commercial Swing Gates
    F0934-96R08 Specification for Standard Colors for Polymer-Coated Chain Link Fence Materials
    F0964-09 Specification for Rigid Poly (Vinyl Chloride) (PVC) Exterior Profiles Used for Fencing and Railing
    F0969-07 Practice for Construction of Chain-Link Tennis Court Fence
    F1043-08 Specification for Strength and Protective Coatings on Steel Industrial Chain Link Fence Framework
    F1083-10 Specification for Pipe, Steel, Hot-Dipped Zinc-Coated (Galvanized) Welded, for Fence Structures
    F1183-96R06 Specification for Aluminum Alloy Chain Link Fence Fabric
    F1184-05R10 Specification for Industrial and Commercial Horizontal Slide Gates
    F1345-10A Specification for Zinc-5 \% Aluminum-Mischmetal Alloy-Coated Steel Chain-Link Fence Fabric
    F1379-95R08 Terminology Relating to Barbed Tape
    F1553-06 Guide for Specifying Chain Link Fence
    F1664-08 Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Tension Wire Used with Chain-Link Fence
    F1665-08 Specification for Poly(Vinyl Chloride) (PVC) and Other Conforming Organic Polymer-Coated Steel Barbed Wire Used With Chain-Link Fence
    F1712-06 Specification for Steel Chain-Link Fencing Materials Used for High Security Applications
    F1908-08 Guide for Fences for Residential Outdoor Swimming Pools, Hot Tubs, and Spas
    F1910-98R08 Specification for Long Barbed Tape Obstacles
    F1911-05R10 Practice for Installation of Barbed Tape
    F1999-00R06 Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Fence Systems
    F2000-10 Guide for Fences for Baseball and Softball Fields
    F2049-10 Safety Performance Specification for Fences/Barriers for Public, Commercial, and Multi-Family Residential Use Outdoor Play Areas
    F2200-05 Specification for Automated Vehicular Gate Construction
    F2408-09 Specification for Ornamental Fences Employing Galvanized Steel Tubular Pickets
    F2409-10 Guide for Fences for Non-Residential Outdoor Swimming Pools, Hot Tubs, and Spas
    F2453_F2453M-05 Specification for Welded Wire Mesh Fence Fabric (Metallic-Coated or Polymer Coated) for Meshes of 6 in.2 \[3871 mm2\] or Less, in Panels or Rolls, with Uniform Meshes
    F2548-06 Specification for Expanded Metal Fence Systems for Security Purposes
    F2589-06 Specification for Ornamental Fences Employing Steel Tubular Pickets
    F2611-06 Guide for Design and Construction of Chain Link Security Fencing
    F2630-07 Guide for Self-Closing/Self-Latching General-Purpose Gates
    F2631-07 Practice for Installation of Chain-Link Fence for Outdoor Sports Fields, Sports Courts and Other Recreation Facilities
    F2698-08 Guide for Fences for Above-Ground and In-ground Skate Park Facilities
    F2699-08 Guide for Fences for Commercial and Public Outdoor Water Spray/Play Areas
    F2780-09 Guide for Design and Construction of Expanded Metal Security Fences and Barriers
    F2781-10 Practice for Testing Forced Entry, Ballistic and Low Impact Resistance of Security Fence Systems
    F2814-09 Guide for Design and Construction of Ornamental Steel Picket Fence Systems for Security Purposes

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 127
       Pages: 916

    - 2010
       Standards: 122
       Pages: 892