ASTM Volume 01.04, January 2011

    Steel--Structural, Reinforcing, Pressure Vessel, Railway

    Table of Contents

    A0001-00R05 Specification for Carbon Steel Tee Rails
    A0002-02R08 Specification for Carbon Steel Girder Rails of Plain, Grooved, and Guard Types
    A0003-01R06 Specification for Steel Joint Bars, Low, Medium, and High Carbon (Non-Heat-Treated)
    A0006_A0006M-10A Specification for General Requirements for Rolled Structural Steel Bars, Plates, Shapes, and Sheet Piling
    A0020_A0020M-10 Specification for General Requirements for Steel Plates for Pressure Vessels
    A0036_A0036M-08 Specification for Carbon Structural Steel
    A0049-01R06 Specification for Heat-Treated Carbon Steel Joint Bars, Microalloyed Joint Bars, and Forged Carbon Steel Compromise Joint Bars
    A0065-07 Specification for Steel Track Spikes
    A0066-07 Specification for Steel Screw Spikes
    A0067-00R05 Specification for Steel Tie Plates, Low-Carbon and High-Carbon-Hot-Worked
    A0082_A0082M-07 Specification for Steel Wire, Plain, for Concrete Reinforcement
    A0131_A0131M-08 Specification for Structural Steel for Ships
    A0183-03R09 Specification for Carbon Steel Track Bolts and Nuts
    A0184_A0184M-06 Specification for Welded Deformed Steel Bar Mats for Concrete Reinforcement
    A0185_A0185M-07 Specification for Steel Welded Wire Reinforcement, Plain, for Concrete
    A0203_A0203M-97R07E01 Specification for Pressure Vessel Plates, Alloy Steel, Nickel
    A0204_A0204M-03R07 Specification for Pressure Vessel Plates, Alloy Steel, Molybdenum
    A0225_A0225M-03R07 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Vanadium-Nickel
    A0242_A0242M-04R09 Specification for High-Strength Low-Alloy Structural Steel
    A0263-09 Specification for Stainless Chromium Steel-Clad Plate
    A0264-09 Specification for Stainless Chromium-Nickel Steel-Clad Plate
    A0265-09 Specification for Nickel and Nickel-Base Alloy-Clad Steel Plate
    A0283_A0283M-03R07 Specification for Low and Intermediate Tensile Strength Carbon Steel Plates
    A0285_A0285M-03R07 Specification for Pressure Vessel Plates, Carbon Steel, Low- and Intermediate-Tensile Strength
    A0299_A0299M-09 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Silicon
    A0302_A0302M-03R07 Specification for Pressure Vessel Plates, Alloy Steel, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
    A0328_A0328M-07 Specification for Steel Sheet Piling
    A0353_A0353M-09 Specification for Pressure Vessel Plates, Alloy Steel, Double-Normalized and Tempered 9 \% Nickel
    A0370-10 Test Methods and Definitions for Mechanical Testing of Steel Products
    A0387_A0387M-10 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum
    A0416_A0416M-10 Specification for Steel Strand, Uncoated Seven-Wire for Prestressed Concrete
    A0421_A0421M-05 Specification for Uncoated Stress-Relieved Steel Wire for Prestressed Concrete
    A0435_A0435M-90R07 Specification for Straight-Beam Ultrasonic Examination of Steel Plates
    A0455_A0455M-03R07 Specification for Pressure Vessel Plates, Carbon Steel, High-Strength Manganese
    A0496_A0496M-07 Specification for Steel Wire, Deformed, for Concrete Reinforcement
    A0497_A0497M-07 Specification for Steel Welded Wire Reinforcement, Deformed, for Concrete
    A0514_A0514M-05R09 Specification for High-Yield-Strength, Quenched and Tempered Alloy Steel Plate, Suitable for Welding
    A0515_A0515M-10 Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service
    A0516_A0516M-10 Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service
    A0517_A0517M-10 Specification for Pressure Vessel Plates, Alloy Steel, High-Strength, Quenched and Tempered
    A0529_A0529M-05R09 Specification for High-Strength Carbon-Manganese Steel of Structural Quality
    A0533_A0533M-09 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered, Manganese-Molybdenum and Manganese-Molybdenum-Nickel
    A0537_A0537M-08 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel
    A0542_A0542M-09 Specification for Pressure Vessel Plates, Alloy Steel, Quenched-and-Tempered, Chromium-Molybdenum, and Chromium-Molybdenum-Vanadium
    A0543_A0543M-09 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered Nickel-Chromium-Molybdenum
    A0553_A0553M-10 Specification for Pressure Vessel Plates, Alloy Steel, Quenched and Tempered 8 and 9 \% Nickel
    A0562_A0562M-10 Specification for Pressure Vessel Plates, Carbon Steel, Manganese-Titanium for Glass or Diffused Metallic Coatings
    A0572_A0572M-07 Specification for High-Strength Low-Alloy Columbium-Vanadium Structural Steel
    A0573_A0573M-05R09 Specification for Structural Carbon Steel Plates of Improved Toughness
    A0577_A0577M-90R07 Specification for Ultrasonic Angle-Beam Examination of Steel Plates
    A0578_A0578M-07 Specification for Straight-Beam Ultrasonic Examination of Rolled Steel Plates for Special Applications
    A0588_A0588M-10 Specification for High-Strength Low-Alloy Structural Steel, up to 50 ksi \[345 MPa\] Minimum Yield Point, with Atmospheric Corrosion Resistance
    A0612_A0612M-03R07 Specification for Pressure Vessel Plates, Carbon Steel, High Strength, for Moderate and Lower Temperature Service
    A0615_A0615M-09B Specification for Deformed and Plain Carbon-Steel Bars for Concrete Reinforcement
    A0633_A0633M-01R06 Specification for Normalized High-Strength Low-Alloy Structural Steel Plates
    A0645_A0645M-10 Specification for Pressure Vessel Plates, 5 \% and 5 \% Nickel Alloy Steels, Specially Heat Treated
    A0648-04A Specification for Steel Wire, Hard Drawn for Prestressing Concrete Pipe
    A0656_A0656M-10 Specification for Hot-Rolled Structural Steel, High-Strength Low-Alloy Plate with Improved Formability
    A0662_A0662M-03R07 Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
    A0673_A0673M-07 Specification for Sampling Procedure for Impact Testing of Structural Steel
    A0690_A0690M-07 Specification for High-Strength Low-Alloy Nickel, Copper, Phosphorus Steel H-Piles and Sheet Piling with Atmospheric Corrosion Resistance for Use in Marine Environments
    A0704_A0704M-06 Specification for Welded Steel Plain Bar or Rod Mats for Concrete Reinforcement
    A0706_A0706M-09B Specification for Low-Alloy Steel Deformed and Plain Bars for Concrete Reinforcement
    A0709_A0709M-10 Specification for Structural Steel for Bridges
    A0710_A0710M-02R07 Specification for Precipitation\NStrengthened Low-Carbon Nickel-Copper-Chromium-Molybdenum-Columbium Alloy Structural Steel Plates
    A0722_A0722M-07 Specification for Uncoated High-Strength Steel Bars for Prestressing Concrete
    A0724_A0724M-09 Specification for Pressure Vessel Plates, Carbon-Manganese-Silicon Steel, Quenched and Tempered, for Welded Pressure Vessels
    A0734_A0734M-87AR07 Specification for Pressure Vessel Plates, Alloy Steel and High-Strength Low-Alloy Steel, Quenched-and-Tempered
    A0735_A0735M-03R07 Specification for Pressure Vessel Plates, Low-Carbon Manganese-Molybdenum-Columbium Alloy Steel, for Moderate and Lower Temperature Service
    A0736_A0736M-03R07 Specification for Pressure Vessel Plates, Low-Carbon Age-Hardening Nickel-Copper-Chromium-Molybdenum-Columbium and Nickel-Copper-Manganese-Molybdenum-Columbium Alloy Steel
    A0737_A0737M-09 Specification for Pressure Vessel Plates, High-Strength, Low-Alloy Steel
    A0738_A0738M-07 Specification for Pressure Vessel Plates, Heat-Treated, Carbon-Manganese-Silicon Steel, for Moderate and Lower Temperature Service
    A0751-08 Test Methods, Practices, and Terminology for Chemical Analysis of Steel Products
    A0759-00R05 Specification for Carbon Steel Crane Rails
    A0767_A0767M-09 Specification for Zinc-Coated (Galvanized) Steel Bars for Concrete Reinforcement
    A0769_A0769M-05R10 Specification for Carbon and High-Strength Electric Resistance Forge-Welded Steel Structural Shapes
    A0770_A0770M-03R07 Specification for Through-Thickness Tension Testing of Steel Plates for Special Applications
    A0775_A0775M-07B Specification for Epoxy-Coated Steel Reinforcing Bars
    A0779_A0779M-10 Specification for Steel Strand, Seven-Wire, Uncoated, Compacted, Stress-Relieved for Prestressed Concrete
    A0786_A0786M-05R09 Specification for Hot-Rolled Carbon, Low-Alloy, High-Strength Low-Alloy, and Alloy Steel Floor Plates
    A0820_A0820M-06 Specification for Steel Fibers for Fiber-Reinforced Concrete
    A0821_A0821M-05 Specification for Steel Wire, Hard Drawn for Prestressing Concrete Tanks
    A0827_A0827M-02R07 Specification for Plates, Carbon Steel, for Forging and Similar Applications
    A0829_A0829M-06 Specification for Alloy Structural Steel Plates
    A0830_A0830M-06 Specification for Plates, Carbon Steel, Structural Quality, Furnished to Chemical Composition Requirements
    A0832_A0832M-10 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Vanadium
    A0841_A0841M-03AR07 Specification for Steel Plates for Pressure Vessels, Produced by Thermo-Mechanical Control Process (TMCP)
    A0844_A0844M-09 Specification for Steel Plates, 9 \% Nickel Alloy, for Pressure Vessels, Produced by the Direct-Quenching Process
    A0857_A0857M-07 Specification for Steel Sheet Piling, Cold Formed, Light Gage
    A0871_A0871M-03R07 Specification for High-Strength Low-Alloy Structural Steel Plate With Atmospheric Corrosion Resistance
    A0881_A0881M-05 Specification for Steel Wire, Deformed, Stress-Relieved or Low-Relaxation for Prestressed Concrete Railroad Ties
    A0882_A0882M-04AR10 Specification for Filled Epoxy-Coated Seven-Wire Prestressing Steel Strand
    A0884_A0884M-06 Specification for Epoxy-Coated Steel Wire and Welded Wire Reinforcement
    A0886_A0886M-10 Specification for Steel Strand, Indented, Seven-Wire Stress-Relieved for Prestressed Concrete
    A0898_A0898M-07 Specification for Straight Beam Ultrasonic Examination of Rolled Steel Structural Shapes
    A0910_A0910M-10 Specification for Uncoated, Weldless, 2- and 3-Wire Steel Strand for Prestressed Concrete
    A0911_A0911M-05 Specification for Uncoated, Stress-Relieved Steel Bars for Prestressed Concrete Railroad Ties
    A0913_A0913M-07 Specification for High-Strength Low-Alloy Steel Shapes of Structural Quality, Produced by Quenching and Self-Tempering Process (QST)
    A0933_A0933M-07 Specification for Vinyl (PVC) Coated Steel Wire and Welded Wire Fabric for Reinforcement
    A0934_A0934M-07 Specification for Epoxy-Coated Prefabricated Steel Reinforcing Bars
    A0941-10A Terminology Relating to Steel, Stainless Steel, Related Alloys, and Ferroalloys
    A0944-05 Test Method for Comparing Bond Strength of Steel Reinforcing Bars to Concrete Using Beam-End Specimens
    A0945_A0945M-06E01 Specification for High-Strength Low-Alloy Structural Steel Plate with Low Carbon and Restricted Sulfur for Improved Weldability, Formability, and Toughness
    A0950_A0950M-99R07 Specification for Fusion-Bonded Epoxy-Coated Structural Steel H-Piles and Sheet Piling
    A0951_A0951M-06 Specification for Steel Wire for Masonry Joint Reinforcement
    A0955_A0955M-10A Specification for Deformed and Plain Stainless-Steel Bars for Concrete Reinforcement
    A0970_A0970M-09 Specification for Headed Steel Bars for Concrete Reinforcement
    A0981-97R07 Test Method for Evaluating Bond Strength for 15.2 mm (0.6 in.) Diameter Prestressing Steel Strand, Grade 270, Uncoated, Used in Prestressed Ground Anchors
    A0992_A0992M-06A Specification for Structural Steel Shapes
    A0996_A0996M-09B Specification for Rail-Steel and Axle-Steel Deformed Bars for Concrete Reinforcement
    A1017_A1017M-07 Specification for Pressure Vessel Plates, Alloy Steel, Chromium-Molybdenum-Tungsten
    A1022_A1022M-07 Specification for Deformed and Plain Stainless Steel Wire and Welded Wire for Concrete Reinforcement
    A1032-04R10 Test Method for Hydrogen Embrittlement Resistance for Steel Wire Hard Drawn Used for Prestressing Concrete Pipe
    A1034_A1034M-10 Test Methods for Testing Mechanical Splices for Steel Reinforcing Bars
    A1035_A1035M-09 Specification for Deformed and Plain, Low-carbon, Chromium, Steel Bars for Concrete Reinforcement
    A1041_A1041M-04R09 Specification for Pressure Vessel Plates, Alloy Steel, Higher Strength Chromium-Molybdenum-Tungsten
    A1043_A1043M-05R09 Specification for Structural Steel with Low Yield to Tensile Ratio for Use in Buildings
    A1044_A1044M-05 Specification for Steel Stud Assemblies for Shear Reinforcement of Concrete
    A1055_A1055M-08AE01 Specification for Zinc and Epoxy Dual-Coated Steel Reinforcing Bars
    A1058-09 Test Methods for Mechanical Testing of Steel Products\MMetric
    A1060_A1060M-10 Specification for Zinc-Coated (Galvanized) Steel Welded Wire Reinforcement, Plain and Deformed, for Concrete
    A1061_A1061M-09 Test Methods for Testing Multi-Wire Steel Strand
    A1064_A1064M-09 Specification for Steel Wire and Welded Wire Reinforcement, Plain and Deformed, for Concrete

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2011
       Standards: 131
       Pages: 848

    - 2010
       Standards: 123
       Pages: 804