ASTM Volume 15.01, March 2010
Refractories, Activated Carbon; Advanced Ceramics
Return to Previous Page
Table of Contents
C0016-03R08E01 Test Method for Load Testing Refractory Shapes at High Temperatures
C0020-00R05 Test Methods for Apparent Porosity, Water Absorption, Apparent Specific Gravity, and Bulk Density of Burned Refractory Brick and Shapes by Boiling Water
C0024-09 Test Method for Pyrometric Cone Equivalent (PCE) of Fireclay and High Alumina Refractory Materials
C0027-98R08 Classification of Fireclay and High-Alumina Refractory Brick
C0071-08 Terminology Relating to Refractories
C0092-95R05 Test Methods for Sieve Analysis and Water Content of Refractory Materials
C0108-46R09 Symbols for Heat Transmission
C0113-02R08 Test Method for Reheat Change of Refractory Brick
C0133-97R08E01 Test Methods for Cold Crushing Strength and Modulus of Rupture of Refractories
C0134-95R05 Test Methods for Size, Dimensional Measurements, and Bulk Density of Refractory Brick and Insulating Firebrick
C0135-96R09E01 Test Method for True Specific Gravity of Refractory Materials by Water Immersion
C0155-97R07 Classification of Insulating Firebrick
C0179-09 Test Method for Drying and Firing Linear Change of Refractory Plastic and Ramming Mix Specimens
C0181-09 Test Method for Workability Index of Fireclay and High-Alumina Plastic Refractories
C0182-88R09 Test Method for Thermal Conductivity of Insulating Firebrick
C0198-09 Test Method for Cold Bonding Strength of Refractory Mortar
C0199-84R05 Test Method for Pier Test for Refractory Mortars
C0201-93R09 Test Method for Thermal Conductivity of Refractories
C0202-93R09E01 Test Method for Thermal Conductivity of Refractory Brick
C0210-95R07E01 Test Method for Reheat Change of Insulating Firebrick
C0288-87R09 Test Method for Disintegration of Refractories in an Atmosphere of Carbon Monoxide
C0357-07R09E01 Test Method for Bulk Density of Granular Refractory Materials
C0401-91R05 Classification of Alumina and Alumina-Silicate Castable Refractories
C0416-97R07 Classification of Silica Refractory Brick
C0417-05 Test Method for Thermal Conductivity of Unfired Monolithic Refractories
C0454-83R07 Practice for Disintegration of Carbon Refractories by Alkali
C0455-07 Classification of Chrome, Chrome-Magnesia, Magnesia-Chrome, and Magnesia Brick
C0456-93R08 Test Method for Hydration Resistance of Basic Bricks and Shapes
C0467-97R08 Classification of Mullite Refractories
C0492-92R08 Test Method for Hydration of Granular Dead-Burned Refractory Dolomite
C0544-03R08 Test Method for Hydration of Dead Burned Magnesite or Periclase Grain
C0545-97R07 Classification of Zircon Refractories
C0577-07E01 Test Method for Permeability of Refractories
C0583-05R09 Test Method for Modulus of Rupture of Refractory Materials at Elevated Temperatures
C0604-02R07E01 Test Method for True Specific Gravity of Refractory Materials by Gas-Comparison Pycnometer
C0607-88R05 Practice for Coking Large Shapes of Carbon-Bearing Materials
C0621-09 Test Method for Isothermal Corrosion Resistance of Refractories to Molten Glass
C0673-97R08 Classification of Fireclay and High-Alumina Plastic Refractories and Ramming Mixes
C0704_C0704M-09E01 Test Method for Abrasion Resistance of Refractory Materials at Room Temperature
C0767-93R09 Test Method for Thermal Conductivity of Carbon Refractories
C0830-00R06E01 Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
C0831-98R08 Test Methods for Residual Carbon, Apparent Residual Carbon, and Apparent Carbon Yield in Coked Carbon-Containing Brick and Shapes
C0832-00R05 Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
C0860-00R05 Practice for Determining the Consistency of Refractory Castable Using the Ball-In-Hand Test
C0861-93R05 Practice for Determining Metric Dimensions of Standard Series Refractory Brick and Shapes
C0862-02R08 Practice for Preparing Refractory Concrete Specimens by Casting
C0863-00R05 Test Method for Evaluating Oxidation Resistance of Silicon Carbide Refractories at Elevated Temperatures
C0865-02R07 Practice for Firing Refractory Concrete Specimens
C0874-99R09 Practice for Rotary Slag Testing of Refractory Materials
C0885-87R07 Test Method for Young's Modulus of Refractory Shapes by Sonic Resonance
C0899-79R07 Practice for Use of Metric Units of Measure for Reporting Properties of Refractory Materials (COMMITTEE C-8 SUPPLEMENT TO E 380)
C0903-08 Practice for Preparing Refractory Castable Specimens by Cold Gunning
C0909-93R05 Practice for Dimensions of a Modular Series of Refractory Brick and Shapes
C0914-09 Test Method for Bulk Density and Volume of Solid Refractories by Wax Immersion
C0973-87R09 Practice for Preparing Test Specimens From Basic Refractory Gunning Products by Pressing
C0974-87R09 Practice for Preparing Test Specimens from Basic Refractory Castable Products by Casting
C0975-87R09 Practice for Preparing Test Specimens from Basic Refractory Ramming Products by Pressing
C0987-00AR05 Practice for Vapor Attack on Refractories for Furnace Superstructures
C1054-03R08 Practice for Pressing and Drying Refractory Plastic and Ramming Mix Specimens
C1099-07 Test Method for Modulus of Rupture of Carbon-Containing Refractory Materials at Elevated Temperatures
C1113_C1113M-09 Test Method for Thermal Conductivity of Refractories by Hot Wire (Platinum Resistance Thermometer Technique)
C1145-06 Terminology of Advanced Ceramics
C1161-02CR08E01 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature
C1171-05 Test Method for Quantitatively Measuring the Effect of Thermal Shock and Thermal Cycling on Refractories
C1175-99AR04 Guide to Test Methods and Standards for Nondestructive Testing of Advanced Ceramics
C1190-95R05 Practice for Location of Test Specimens from Magnesia-Carbon and Impregnated Burned Basic Brick
C1198-09 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Sonic Resonance
C1211-02R08 Test Method for Flexural Strength of Advanced Ceramics at Elevated Temperatures
C1212-98R04 Practice for Fabricating Ceramic Reference Specimens Containing Seeded Voids
C1223-09 Test Method for Testing of Glass Exudation from AZS Fusion-Cast Refractories
C1239-07 Practice for Reporting Uniaxial Strength Data and Estimating Weibull Distribution Parameters for Advanced Ceramics
C1259-08E01 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio for Advanced Ceramics by Impulse Excitation of Vibration
C1273-05 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Ambient Temperatures
C1274-00R06 Test Method for Advanced Ceramic Specific Surface Area by Physical Adsorption
C1275-00R05E01 Test Method for Monotonic Tensile Behavior of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperature
C1282-08 Test Method for Determining the Particle Size Distribution of Advanced Ceramics by Centrifugal Photosedimentation
C1291-00AR05 Test Method for Elevated Temperature Tensile Creep Strain, Creep Strain Rate, and Creep Time-to-Failure for Advanced Monolithic Ceramics
C1292-00R05 Test Method for Shear Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1322-05BE01 Practice for Fractography and Characterization of Fracture Origins in Advanced Ceramics
C1323-96R01E01 Test Method for Ultimate Strength of Advanced Ceramics with Diametrally Compressed C-Ring Specimens at Ambient Temperature
C1326-08E01 Test Method for Knoop Indentation Hardness of Advanced Ceramics
C1327-08 Test Method for Vickers Indentation Hardness of Advanced Ceramics
C1331-01R07 Test Method for Measuring Ultrasonic Velocity in Advanced Ceramics with Broadband Pulse-Echo Cross-Correlation Method
C1332-01R07 Test Method for Measurement of Ultrasonic Attenuation Coefficients of Advanced Ceramics by Pulse-Echo Contact Technique
C1336-96R08 Practice for Fabricating Non-Oxide Ceramic Reference Specimens Containing Seeded Inclusions
C1337-96R05 Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Ceramic Composites under Tensile Loading at Elevated Temperatures
C1341-06 Test Method for Flexural Properties of Continuous Fiber-Reinforced Advanced Ceramic Composites
C1358-05 Test Method for Monotonic Compressive Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics with Solid Rectangular Cross-Section Test Specimens at Ambient Temperatures
C1359-05 Test Method for Monotonic Tensile Strength Testing of Continuous Fiber-Reinforced Advanced Ceramics With Solid Rectangular Cross-Section Test Specimens at Elevated Temperatures
C1360-01R07 Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperatures
C1361-01R07 Practice for Constant-Amplitude, Axial, Tension-Tension Cyclic Fatigue of Advanced Ceramics at Ambient Temperatures
C1366-04R09 Test Method for Tensile Strength of Monolithic Advanced Ceramics at Elevated Temperatures
C1368-06 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Ambient Temperature
C1407-98R05 Practice for Calculating Areas, Volume, and Linear Change of Refractory Shapes
C1419-99AR09 Test Method for Sonic Velocity in Refractory Materials at Room Temperature and Its Use in Obtaining an Approximate Young's Modulus
C1421-09 Test Methods for Determination of Fracture Toughness of Advanced Ceramics at Ambient Temperature
C1424-04 Test Method for Monotonic Compressive Strength of Advanced Ceramics at Ambient Temperature
C1425-05 Test Method for Interlaminar Shear Strength of 1\ND and 2\ND Continuous Fiber-Reinforced Advanced Ceramics at Elevated Temperatures
C1445-07 Test Method for Measuring Consistency of Castable Refractory Using a Flow Table
C1446-07 Test Method for Measuring Consistency of Self-Flowing Castable Refractories
C1465-08 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress-Rate Flexural Testing at Elevated Temperatures
C1468-06 Test Method for Transthickness Tensile Strength of Continuous Fiber-Reinforced Advanced Ceramics at Ambient Temperature
C1469-00R05 Test Method for Shear Strength of Joints of Advanced Ceramics at Ambient Temperature
C1470-06 Guide for Testing the Thermal Properties of Advanced Ceramics
C1494-01R07 Test Methods for Determination of Mass Fraction of Carbon, Nitrogen, and Oxygen in Silicon Nitride Powder
C1495-07 Test Method for Effect of Surface Grinding on Flexure Strength of Advanced Ceramics
C1499-09 Test Method for Monotonic Equibiaxial Flexural Strength of Advanced Ceramics at Ambient Temperature
C1525-04R09 Test Method for Determination of Thermal Shock Resistance for Advanced Ceramics by Water Quenching
C1547-02R07 Classification for Fusion-Cast Refractory Blocks and Shapes
C1548-02R07 Test Method for Dynamic Young's Modulus, Shear Modulus, and Poisson's Ratio of Refractory Materials by Impulse Excitation of Vibration
C1557-03R08 Test Method for Tensile Strength and Young's Modulus of Fibers
C1576-05 Test Method for Determination of Slow Crack Growth Parameters of Advanced Ceramics by Constant Stress Flexural Testing (Stress Rupture) at Ambient Temperature
C1624-05 Test Method for Adhesion Strength and Mechanical Failure Modes of Ceramic Coatings by Quantitative Single Point Scratch Testing
C1655-06 Classification of Fireclay and High-Alumina Mortars
C1656-07 Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
C1674-08 Test Method for Flexural Strength of Advanced Ceramics with Engineered Porosity (Honeycomb Cellular Channels) at Ambient Temperatures
C1678-09 Practice for Fractographic Analysis of Fracture Mirror Sizes in Ceramics and Glasses
C1683-08 Practice for Size Scaling of Tensile Strengths Using Weibull Statistics for Advanced Ceramics
C1684-08 Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature\MCylindrical Rod Strength
D2652-05A Terminology Relating to Activated Carbon
D2854-09 Test Method for Apparent Density of Activated Carbon
D2862-97R09E01 Test Method for Particle Size Distribution of Granular Activated Carbon
D2866-94R04 Test Method for Total Ash Content of Activated Carbon
D2867-09 Test Methods for Moisture in Activated Carbon
D3466-06 Test Method for Ignition Temperature of Granular Activated Carbon
D3467-04R09 Test Method for Carbon Tetrachloride Activity of Activated Carbon
D3802-79R05 Test Method for Ball-Pan Hardness of Activated Carbon
D3803-91R09 Test Method for Nuclear-Grade Activated Carbon
D3838-05 Test Method for pH of Activated Carbon
D3860-98R08 Practice for Determination of Adsorptive Capacity of Activated Carbon by Aqueous Phase Isotherm Technique
D4069-95R08 Specification for Impregnated Activated Carbon Used to Remove Gaseous Radio-Iodines from Gas Streams
D4607-94R06 Test Method for Determination of Iodine Number of Activated Carbon
D5029-98R09 Test Method for Water Solubles in Activated Carbon
D5158-98R05 Test Method for Determination of Particle Size of Powdered Activated Carbon by Air Jet Sieving
D5159-04R09 Guide for Dusting Attrition of Granular Activated Carbon
D5160-95R08 Guide for Gas-Phase Adsorption Testing of Activated Carbon
D5228-92R05 Test Method for Determination of Butane Working Capacity of Activated Carbon
D5742-95R05 Test Method for Determination of Butane Activity of Activated Carbon
D5832-98R08 Test Method for Volatile Matter Content of Activated Carbon Samples
D5919-96R06 Practice for Determination of Adsorptive Capacity of Activated Carbon by a Micro-Isotherm Technique for Adsorbates at ppb Concentrations
D6385-99R06 Test Method for Determining Acid Extractable Content in Activated Carbon by Ashing
D6586-03R08 Practice for the Prediction of Contaminant Adsorption On GAC In Aqueous Systems Using Rapid Small-Scale Column Tests
D6646-03R08 Test Method for Determination of the Accelerated Hydrogen Sulfide Breakthrough Capacity of Granular and Pelletized Activated Carbon
D6647-01R06 Test Method for Determination of Acid Soluble Iron Via Atomic Absorption
D6781-02R07 Guide for Carbon Reactivation
D6851-02R07E01 Test Method for Determination of Contact pH with Activated Carbon
D7385-07 Guide for Estimating Carbon Saturation by Temperature Rise upon Immersion