ASTM Volume 08.03, July 2010

    Plastics (III): D5117 - latest; Reinforced Plastic Piping Systems and Chemical Equipment; Plastic Building Products

    Table of Contents

    D5117-09 Test Method for Dye Penetration of Solid Fiberglass Reinforced Pultruded Stock
    D5132-04 Test Method for Horizontal Burning Rate of Polymeric Materials Used in Occupant Compartments of Motor Vehicles
    D5138-06 Classification System for Liquid Crystal Polymers (LCP)
    D5155-07 Test Methods for Polyurethane Raw Materials: Determination of the Isocyanate Content of Aromatic Isocyanates
    D5203-07 Specification for Polyethylene Plastics Molding and Extrusion Materials from Recycled Post-Consumer (HDPE) Sources
    D5204-06 Classification System for Polyamide-Imide (PAI) Molding and Extrusion Materials
    D5205-96R03 Classification System for Polyetherimide (PEI) Materials
    D5207-09 Practice for Confirmation of 20\Nmm (50\NW) and 125\Nmm (500\NW) Test Flames for Small-Scale Burning Tests on Plastic Materials
    D5208-09 Practice for Fluorescent Ultraviolet (UV) Exposure of Photodegradable Plastics
    D5210-92R07 Test Method for Determining the Anaerobic Biodegradation of Plastic Materials in the Presence of Municipal Sewage Sludge
    D5224-00R06 Practice for Compression Molding Test Specimens of Thermosetting Molding Compounds
    D5225-09 Test Method for Measuring Solution Viscosity of Polymers with a Differential Viscometer
    D5226-98R10E01 Practice for Dissolving Polymer Materials
    D5227-01R08E01 Test Method for Measurement of Hexane Extractable Content of Polyolefins
    D5260-04 Classification for Chemical Resistance of Poly(Vinyl Chloride) (PVC) Homopolymer and Copolymer Compounds and Chlorinated Poly(Vinyl Chloride) (CPVC) Compounds
    D5271-02 Test Method for Determining the Aerobic Biodegradation of Plastic Materials in an Activated-Sludge-Wastewater-Treatment System
    D5272-08 Practice for Outdoor Exposure Testing of Photodegradable Plastics
    D5279-08 Test Method for Plastics: Dynamic Mechanical Properties: In Torsion
    D5296-05 Test Method for Molecular Weight Averages and Molecular Weight Distribution of Polystyrene by High Performance Size-Exclusion Chromatography
    D5336-09 Specification for Polyphthalamide (PPA) Injection Molding Materials
    D5338-98R03 Test Method for Determining Aerobic Biodegradation of Plastic Materials Under Controlled Composting Conditions
    D5418-07 Test Method for Plastics: Dynamic Mechanical Properties: In Flexure (Dual Cantilever Beam)
    D5419-09 Test Method for Environmental Stress Crack Resistance (ESCR) of Threaded Plastic Closures
    D5420-04 Test Method for Impact Resistance of Flat, Rigid Plastic Specimen by Means of a Striker Impacted by a Falling Weight (Gardner Impact)
    D5422-09 Test Method for Measurement of Properties of Thermoplastic Materials by Screw-Extrusion Capillary Rheometer
    D5436-03R08 Specification for Cast Poly(Methyl Methacrylate) Plastic Rods, Tubes, and Shapes
    D5477-02 Practice for Identification of Polymer Layers or Inclusions by Fourier Transform Infrared Microspectroscopy (FT-IR)
    D5491-08 Classification for Recycled Post-Consumer Polyethylene Film Sources for Molding and Extrusion Materials
    D5492-06 Test Method for Determination of Xylene Solubles in Propylene Plastics
    D5507-99R08E01 Test Method for Determination of Trace Organic Impurities in Monomer Grade Vinyl Chloride by Capillary Column/Multidimensional Gas Chromatography
    D5508-94AR09E01 Test Method for Determination of Residual Acrylonitrile Monomer in Styrene-Acrylonitrile Copolymer Resins and Nitrile-Butadiene Rubber by Headspace-Capillary Gas Chromatography (HS-CGC)
    D5511-02 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under High-Solids Anaerobic-Digestion Conditions
    D5523-04 Test Method for Polyurethane Raw Materials: Acidity by Argentometric Determination of Hydrolyzable Chlorine in Monomeric, Aromatic Isocyanates
    D5526-94R02 Test Method for Determining Anaerobic Biodegradation of Plastic Materials Under Accelerated Landfill Conditions
    D5575-07 Classification System for Copolymers of Vinylidene Fluoride (VDF) with Other Fluorinated Monomers
    D5576-00R06 Practice for Determination of Structural Features in Polyolefins and Polyolefin Copolymers by Infrared Spectrophotometry (FT-IR)
    D5577-94R10E01 Guide for Techniques to Separate and Identify Contaminants in Recycled Plastics
    D5592-94R02E01 Guide for Material Properties Needed in Engineering Design Using Plastics
    D5594-98R04 Test Method for Determination of the Vinyl Acetate Content of Ethylene-Vinyl Acetate (EVA) Copolymers by Fourier Transform Infrared Spectroscopy (FT-IR)
    D5628-07 Test Method for Impact Resistance of Flat, Rigid Plastic Specimens by Means of a Falling Dart (Tup or Falling Mass)
    D5629-05 Test Method for Polyurethane Raw Materials: Determination of Acidity in Low-Acidity Aromatic Isocyanates and Polyurethane Prepolymers
    D5630-06 Test Method for Ash Content in Plastics
    D5672-09 Test Method for Testing Flexible Cellular Materials Measurement of Indentation Force Deflection Using a 25-mm (1-in.) Deflection Technique
    D5675-04 Classification for Fluoropolymer Micropowders
    D5740-09 Guide for Writing Material Standards in the Classification D 4000 Format
    D5814-02 Practice for Determination of Contamination in Recycled Poly(Ethylene Terephthalate) (PET) Flakes and Chips Using a Plaque Test
    D5857-09 Specification for Polypropylene Injection and Extrusion Materials Using ISO Protocol and Methodology
    D5870-95R03 Practice for Calculating Property Retention Index of Plastics
    D5927-09 Classification System for Thermoplastic Polyester (TPES) Injection and Extrusion Materials Based on ISO Test Methods
    D5930-09 Test Method for Thermal Conductivity of Plastics by Means of a Transient Line-Source Technique
    D5946-09 Test Method for Corona-Treated Polymer Films Using Water Contact Angle Measurements
    D5947-06 Test Methods for Physical Dimensions of Solid Plastics Specimens
    D5948-05E01 Specification for Molding Compounds, Thermosetting
    D5951-96R02 Practice for Preparing Residual Solids Obtained After Biodegradability Standard Methods for Plastics in Solid Waste for Toxicity and Compost Quality Testing
    D5988-03 Test Method for Determining Aerobic Biodegradation in Soil of Plastic Materials or Residual Plastic Materials After Composting
    D5989-05 Specification for Extruded and Monomer Cast Shapes Made from Nylon (PA)
    D5991-09 Practice for Separation and Identification of Poly(Vinyl Chloride) (PVC) Contamination in Poly(Ethylene Terephthalate) (PET) Flake
    D5998-03 Specification for Molded Polyethylene Shipping and Storage Drums
    D6002-96R02E01 Guide for Assessing the Compostability of Environmentally Degradable Plastics
    D6040-06 Guide to Standard Test Methods for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
    D6042-09 Test Method for Determination of Phenolic Antioxidants and Erucamide Slip Additives in Polypropylene Homopolymer Formulations Using Liquid Chromatography (LC)
    D6068-96R02E01 Test Method for Determining Curves of Plastic Materials
    D6098-97R03 Specification for Extruded and Compression Molded Shapes Made from Polycarbonate (PC)
    D6099-08 Test Method for Polyurethane Raw Materials: Determination of Acidity in Moderate to High Acidity Aromatic Isocyanates
    D6100-05 Specification for Extruded, Compression Molded and Injection Molded Acetal Shapes (POM)
    D6108-09 Test Method for Compressive Properties of Plastic Lumber and Shapes
    D6109-05 Test Methods for Flexural Properties of Unreinforced and Reinforced Plastic Lumber and Related Products
    D6110-08 Test Method for Determining the Charpy Impact Resistance of Notched Specimens of Plastics
    D6111-09 Test Method for Bulk Density And Specific Gravity of Plastic Lumber and Shapes by Displacement
    D6112-97R05 Test Methods for Compressive and Flexural Creep and Creep-Rupture of Plastic Lumber and Shapes
    D6117-97R05 Test Methods for Mechanical Fasteners in Plastic Lumber and Shapes
    D6150-09 Test Method for Estimating Processing Losses of Plastisols and Organosols Due to Volatility
    D6226-05 Test Method for Open Cell Content of Rigid Cellular Plastics
    D6247-98R04 Test Method for Analysis of Elemental Content in Polyolefins By X-ray Fluorescence Spectrometry
    D6248-98R04 Test Method for Vinyl and Trans Unsaturation in Polyethylene by Infrared Spectrophotometry
    D6261-98R03 Specification for Extruded and Compression Molded Basic Shapes Made from Thermoplastic Polyester (TPES)
    D6262-05 Specification for Extruded, Compression Molded, and Injection Molded Basic Shapes of Poly(aryl ether ketone) (PAEK)
    D6263-98R03 Specification for Extruded Rods and Bars Made From Rigid Poly(Vinyl Chloride) (PVC) and Chlorinated Poly(Vinyl Chloride) (CPVC)
    D6265-09 Practice for Separation of Contaminants in Polymers Using an Extruder Filter Test
    D6272-02R08E01 Test Method for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials by Four-Point Bending
    D6287-09 Practice for Cutting Film and Sheeting Test Specimens
    D6288-09 Practice for Separation and Washing of Recycled Plastics Prior to Testing
    D6289-08 Test Method for Measuring Shrinkage from Mold Dimensions of Molded Thermosetting Plastics
    D6290-05 Test Method for Color Determination of Plastic Pellets
    D6338-09 Classification System for Highly Crosslinked Thermoplastic Vulcanizates (HCTPVs) Based on ASTM Standard Test Methods
    D6339-05 Specification for Syndiotactic Polystyrene Molding and Extrusion (SPS)
    D6340-98R07 Test Methods for Determining Aerobic Biodegradation of Radiolabeled Plastic Materials in an Aqueous or Compost Environment
    D6341-98R05 Test Method for Determination of the Linear Coefficient of Thermal Expansion of Plastic Lumber and Plastic Lumber Shapes Between \N30 and 140|SDF \[\N34.4 and 60|SDC\]
    D6342-08 Practice for Polyurethane Raw Materials: Determining Hydroxyl Number of Polyols by Near Infrared (NIR) Spectroscopy
    D6358-06 Classification System for Poly (Phenylene Sulfide) Injection Molding and Extrusion Materials Using ISO Methods
    D6360-07 Practice for Enclosed Carbon-Arc Exposures of Plastics
    D6394-09 Specification for Sulfone Plastics (SP)
    D6395-05 Test Method for Flatwise Flexural Impact Resistance of Rigid Plastics
    D6400-04 Specification for Compostable Plastics
    D6436-08 Guide for Reporting Properties for Plastics and Thermoplastic Elastomers
    D6437-05 Test Method for Polyurethane Raw Materials: Alkalinity in Low-Alkalinity Polyols (Determination of CPR Values of Polyols)
    D6456-99R04 Specification for Finished Parts Made from Polyimide Resin
    D6457-08 Specification for Extruded and Compression Molded Rod and Heavy-Walled Tubing Made from Polytetrafluoroethylene (PTFE)
    D6474-99R06 Test Method for Determining Molecular Weight Distribution and Molecular Weight Averages of Polyolefins by High Temperature Gel Permeation Chromatography
    D6576-07 Specification for Flexible Cellular Rubber Chemically Blown
    D6585-05 Specification for Unsintered Polytetrafluoroethylene (PTFE) Extruded Film or Tape
    D6645-01R10 Test Method for Methyl (Comonomer) Content in Polyethylene by Infrared Spectrophotometry
    D6662-09 Specification for Polyolefin-Based Plastic Lumber Decking Boards
    D6691-09 Test Method for Determining Aerobic Biodegradation of Plastic Materials in the Marine Environment by a Defined Microbial Consortium or Natural Sea Water Inoculum
    D6712-01R09 Specification for Ultra-High-Molecular-Weight Polyethylene (UHMW-PE) Solid Plastic Shapes
    D6713-01R09 Specification for Extruded and Compression Molded Shapes Made from Poly(Vinylidene Fluoride) (PVDF)
    D6776-02 Test Method for Determining Anaerobic Biodegradability of Radiolabeled Plastic Materials in a Laboratory-Scale Simulated Landfill Environment
    D6778-06 Classification for Polyoxymethylene (POM, Acetal) Molding and Extrusion Materials
    D6779-08A Classification System for Polyamide Molding and Extrusion Materials (PA)
    D6835-08 Classification System for Thermoplastic Elastomer-Ether-Ester Molding and Extrusion Materials (TEEE)
    D6852-02 Guide for Determination of Biobased Content, Resources Consumption, and Environmental Profile of Materials and Products
    D6865-04 Classification System for Acrylonitrile\NStyrene\NAcrylate (ASA) and Acrylonitrile\NEPDM\NStyrene (AES) Plastics and Alloys Molding and Extrusion Materials
    D6866-08 Test Methods for Determining the Biobased Content of Solid, Liquid, and Gaseous Samples Using Radiocarbon Analysis
    D6867-03R09 Specification for Perfluoroalkoxy (PFA)-Fluoropolymer Tubing
    D6868-03 Specification for Biodegradable Plastics Used as Coatings on Paper and Other Compostable Substrates
    D6869-03 Test Method for Coulometric and Volumetric Determination of Moisture in Plastics Using the Karl Fischer Reaction (the Reaction of Iodine with Water)
    D6953-03 Test Method for Determination of Antioxidants and Erucamide Slip Additives in Polyethylene Using Liquid Chromatography (LC)
    D6954-04 Guide for Exposing and Testing Plastics that Degrade in the Environment by a Combination of Oxidation and Biodegradation
    D6979-08 Test Method for Polyurethane Raw Materials: Determination of Basicity in Polyols, Expressed as Percent Nitrogen
    D6980-09 Test Method for Determination of Moisture in Plastics by Loss in Weight
    D6988-08 Guide for Determination of Thickness of Plastic Film Test Specimens
    D7026-04 Guide for Sampling and Reporting of Results for Determination of Biobased Content of Materials via Carbon Isotope Analysis
    D7027-05E01 Test Method for Evaluation of Scratch Resistance of Polymeric Coatings and Plastics Using an Instrumented Scratch Machine
    D7029-09 Test Method for Determination of Reactivity of Unsaturated Polyesters and Vinyl Esters at 180.0|SDF (82.2|SDC)
    D7075-04 Practice for Evaluating and Reporting Environmental Performance of Biobased Products
    D7081-05 Specification for Non-Floating Biodegradable Plastics in the Marine Environment
    D7083-04 Practice for Determination of Monomeric Plasticizers in Poly (Vinyl Chloride) (PVC) by Gas Chromatography
    D7107-04 Test Method for Creep Measurement of Self-Lubricating Bushings
    D7132-05 Test Method for Determination of Retained Blowing Agent in Extruded Polystyrene Foam
    D7133-05 Test Method for Polyurethane Raw Materials: Instrumental Measurement of Tristimulus CIELAB Color and Yellowness Index of Liquids
    D7134-05 Test Method for Molecular Mass Averages and Molecular Mass Distribution of Atactic Polystyrene by Matrix Assisted Laser Desorption/Ionization (MALDI)-Time of Flight (TOF) Mass Spectrometry (MS)
    D7191-05 Test Method for Determination of Moisture in Plastics by Relative Humidity Sensor
    D7192-08A Test Method for High Speed Puncture Properties of Plastic Films Using Load and Displacement Sensors
    D7193-05 Specification for Unsintered Pigmented Polytetrafluoroethylene (PTFE) Extruded Film or Tape
    D7194-05 Specification for Aerospace Parts Machined from Polychlorotrifluoroethylene (PCTFE)
    D7209-06 Guide for Waste Reduction, Resource Recovery, and Use of Recycled Polymeric Materials and Products
    D7210-06 Practice for Extraction of Additives in Polyolefin Plastics
    D7211-06 Specification for Parts Machined from Polychlorotrifluoroethylene (PCTFE) and Intended for General Use
    D7252-06 Test Method for Polyurethane Raw Materials: Determination of Monomer and Isomers in Isocyanates
    D7253-06 Test Method for Polyurethane Raw Materials: Determination of Acidity as Acid Number for Polyether Polyols
    D7258-09 Specification for Polymeric Piles
    D7292-06 Specification for Extruded, Compression-Molded, and Injection-Molded Basic Shapes of Polyamide-Imide (PAI)
    D7293-06 Test Method for Extruded and Compression-Molded Shapes Made from Polyetherimide (PEI)
    D7309-07A Test Method for Determining Flammability Characteristics of Plastics and Other Solid Materials Using Microscale Combustion Calorimetry
    D7310-07 Guide for Defect Detection and Rating of Plastic Films Using Optical Sensors
    D7399-08 Test Method for Determination of the Amount of Polypropylene (PP) in Polypropylene/LDPE Mixtures Using Infrared Spectrophotometer (FTIR)
    D7471-09 Specification for CPT-Fluoropolymer Molding and Extrusion Materials
    D7472-09 Specification for EFEP-Fluoropolymer Molding and Extrusion Materials
    D7474-08 Practice for Determining Residual Stresses in Extruded or Molded Sulfone Plastic (SP) Parts by Immersion in Various Chemical Reagents
    D7486-08 Test Method for Measurement of Fines and Dust Particles on Plastic Pellets by Wet Analysis
    D7487-08 Practice for Polyurethane Raw Materials: Polyurethane Foam Cup Test
    D7567-09 Test Method for Determining Gel Content in Crosslinked Ethylene Plastics Using Pressurized Liquid Extraction
    C0581-03R08E01 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
    C0582-09 Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
    D2105-01R07E01 Test Method for Longitudinal Tensile Properties of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
    D2143-00R05E01 Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
    D2310-06 Classification for Machine-Made |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    D2517-06 Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
    D2924-01R06 Test Method for External Pressure Resistance of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    D2925-01R07E01 Test Method for Beam Deflection of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
    D2992-06 Practice for Obtaining Hydrostatic or Pressure Design Basis for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
    D2996-01R07E01 Specification for Filament-Wound |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    D2997-01R07E01 Specification for Centrifugally Cast |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    D3262-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
    D3299-08 Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
    D3517-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
    D3567-97R06 Practice for Determining Dimensions of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
    D3681-06 Test Method for Chemical Resistance of |P`Fiberglass|P' (Glass\NFiber\NReinforced Thermosetting-Resin) Pipe in a Deflected Condition
    D3753-05E01 Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
    D3754-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
    D3839-08 Guide for Underground Installation of |P`Fiberglass|P' (Glass-FiberReinforced Thermosetting-Resin) Pipe
    D3840-01R05 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
    D3982-08 Specification for Contact Molded |P`Fiberglass|P' (Glass Fiber Reinforced Thermosetting Resin) Ducts
    D4024-05 Specification for Machine Made |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
    D4097-01R10 Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
    D4161-01R05 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
    D4167-97R07 Specification for Fiber-Reinforced Plastic Fans and Blowers
    D4398-07 Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
    D5364-08E01 Guide for Design, Fabrication, and Erection of Fiberglass Reinforced (FRP) Plastic Chimney Liners with Coal-Fired Units
    D5365-06 Test Method for Long-Term Ring-Bending Strain of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
    D5421-05 Specification for Contact Molded |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
    D5677-05 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
    D5685-05 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
    D5813-04R08 Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
    D6041-97R02 Specification for Contact-Molded |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
    D6783-05 Specification for Polymer Concrete Pipe
    D1494-97R08E01 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
    D3678-97R08E01 Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
    D3679-09A Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
    D3841-97R08E01 Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
    D4068-09 Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
    D4226-09 Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
    D4477-09 Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
    D4495-00R05 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
    D4551-96R08E01 Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
    D4726-09 Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
    D4756-06 Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
    D4803-97R02E01 Test Method for Predicting Heat Buildup in PVC Building Products
    D5206-06A Test Method for Windload Resistance of Rigid Plastic Siding
    D5319-97R08E01 Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
    D5926-09 Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
    D6777-02 Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
    D6864-03AE01 Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
    D7082-04 Specification for Polyethylene Stay In Place Form System for End Walls for Drainage Pipe
    D7251-10 Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
    D7254-07 Specification for Polypropylene (PP) Siding
    D7445-09 Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding with Foam Plastic Backing (Backed Vinyl Siding)

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2010
       Standards: 208
       Pages: 1378

    - 2009
       Standards: 153
       Pages: 990