ASTM Volume 04.06, November 2010

    Thermal Insulation; Building and Environmental Acoustics

    Table of Contents

    C0163-05 Practice for Mixing Thermal Insulating Cement Samples
    C0165-07 Test Method for Measuring Compressive Properties of Thermal Insulations
    C0166-05 Test Method for Covering Capacity and Volume Change Upon Drying of Thermal Insulating Cement
    C0167-09 Test Methods for Thickness and Density of Blanket or Batt Thermal Insulations
    C0168-10 Terminology Relating to Thermal Insulation
    C0177-10 Test Method for Steady-State Heat Flux Measurements and Thermal Transmission Properties by Means of the Guarded-Hot-Plate Apparatus
    C0195-07 Specification for Mineral Fiber Thermal Insulating Cement
    C0196-00R05 Specification for Expanded or Exfoliated Vermiculite Thermal Insulating Cement
    C0203-05A Test Methods for Breaking Load and Flexural Properties of Block-Type Thermal Insulation
    C0208-08A Specification for Cellulosic Fiber Insulating Board
    C0209-07AE01 Test Methods for Cellulosic Fiber Insulating Board
    C0240-08E01 Test Methods of Testing Cellular Glass Insulation Block
    C0302-95R07 Test Method for Density and Dimensions of Preformed Pipe-Covering-Type Thermal Insulation
    C0303-10 Test Method for Dimensions and Density of Preformed Block and Board\NType Thermal Insulation
    C0335-05AE01 Test Method for Steady-State Heat Transfer Properties of Pipe Insulation
    C0356-03 Test Method for Linear Shrinkage of Preformed High-Temperature Thermal Insulation Subjected to Soaking Heat
    C0367_C0367M-09 Test Methods for Strength Properties of Prefabricated Architectural Acoustical Tile or Lay-In Ceiling Panels
    C0384-04 Test Method for Impedance and Absorption of Acoustical Materials by Impedance Tube Method
    C0390-08E01 Practice for Sampling and Acceptance of Thermal Insulation Lots
    C0411-05 Test Method for Hot-Surface Performance of High-Temperature Thermal Insulation
    C0419-08 Practice for Making and Curing Test Specimens of Mastic Thermal Insulation Coatings
    C0421-08 Test Method for Tumbling Friability of Preformed Block-Type and Preformed Pipe-Covering-Type Thermal Insulation
    C0423-09A Test Method for Sound Absorption and Sound Absorption Coefficients by the Reverberation Room Method
    C0447-03 Practice for Estimating the Maximum Use Temperature of Thermal Insulations
    C0449-07 Specification for Mineral Fiber Hydraulic-Setting Thermal Insulating and Finishing Cement
    C0450-08 Practice for Fabrication of Thermal Insulating Fitting Covers for NPS Piping, and Vessel Lagging
    C0461-81R08 Test Methods for Mastics and Coatings Used With Thermal Insulation
    C0488-05 Test Method for Conducting Exterior Exposure Tests of Finishes for Thermal Insulation
    C0516-08 Specification for Vermiculite Loose Fill Thermal Insulation
    C0518-10 Test Method for Steady-State Thermal Transmission Properties by Means of the Heat Flow Meter Apparatus
    C0520-04 Test Methods for Density of Granular Loose Fill Insulations
    C0522-03R09E01 Test Method for Airflow Resistance of Acoustical Materials
    C0533-09 Specification for Calcium Silicate Block and Pipe Thermal Insulation
    C0534_C0534M-08 Specification for Preformed Flexible Elastomeric Cellular Thermal Insulation in Sheet and Tubular Form
    C0547-07E01 Specification for Mineral Fiber Pipe Insulation
    C0549-06 Specification for Perlite Loose Fill Insulation
    C0550-10 Test Method for Measuring Trueness and Squareness of Rigid Block and Board Thermal Insulation
    C0552-07 Specification for Cellular Glass Thermal Insulation
    C0553-08 Specification for Mineral Fiber Blanket Thermal Insulation for Commercial and Industrial Applications
    C0578-10 Specification for Rigid, Cellular Polystyrene Thermal Insulation
    C0585-10 Practice for Inner and Outer Diameters of Thermal Insulation for Nominal Sizes of Pipe and Tubing
    C0591-09 Specification for Unfaced Preformed Rigid Cellular Polyisocyanurate Thermal Insulation
    C0592-08A Specification for Mineral Fiber Blanket Insulation and Blanket-Type Pipe Insulation (Metal-Mesh Covered) (Industrial Type)
    C0610-09E01 Specification for Molded Expanded Perlite Block and Pipe Thermal Insulation
    C0612-10 Specification for Mineral Fiber Block and Board Thermal Insulation
    C0634-10 Terminology Relating to Building and Environmental Acoustics
    C0635_C0635M-07 Specification for the Manufacture, Performance, and Testing of Metal Suspension Systems for Acoustical Tile and Lay-in Panel Ceilings
    C0636_C0636M-08 Practice for Installation of Metal Ceiling Suspension Systems for Acoustical Tile and Lay-In Panels
    C0647-08 Guide to Properties and Tests of Mastics and Coating Finishes for Thermal Insulation
    C0653-97R07 Guide for Determination of the Thermal Resistance of Low-Density Blanket-Type Mineral Fiber Insulation
    C0656-07 Specification for Structural Insulating Board, Calcium Silicate
    C0665-06 Specification for Mineral-Fiber Blanket Thermal Insulation for Light Frame Construction and Manufactured Housing
    C0667-09 Specification for Prefabricated Reflective Insulation Systems for Equipment and Pipe Operating at Temperatures above Ambient Air
    C0680-08 Practice for Estimate of the Heat Gain or Loss and the Surface Temperatures of Insulated Flat, Cylindrical, and Spherical Systems by Use of Computer Programs
    C0686-90R07 Test Method for Parting Strength of Mineral Fiber Batt- and Blanket-Type Insulation
    C0687-07 Practice for Determination of Thermal Resistance of Loose-Fill Building Insulation
    C0692-08 Test Method for Evaluating the Influence of Thermal Insulations on External Stress Corrosion Cracking Tendency of Austenitic Stainless Steel
    C0726-05E01 Specification for Mineral Fiber Roof Insulation Board
    C0727-01R07E01 Practice for Installation and Use of Reflective Insulation in Building Constructions
    C0728-05R10 Specification for Perlite Thermal Insulation Board
    C0739-08 Specification for Cellulosic Fiber Loose-Fill Thermal Insulation
    C0740_C0740M-97R09 Practice for Evacuated Reflective Insulation In Cryogenic Service
    C0755-03 Practice for Selection of Water Vapor Retarders for Thermal Insulation
    C0764-07 Specification for Mineral Fiber Loose-Fill Thermal Insulation
    C0795-08 Specification for Thermal Insulation for Use in Contact with Austenitic Stainless Steel
    C0800-08 Specification for Fibrous Glass Blanket Insulation (Aircraft Type)
    C0835-06 Test Method for Total Hemispherical Emittance of Surfaces up to 1400|SDC
    C0846-94R09 Practice for Application of Cellulosic Fiber Insulating Board for Wall Sheathing
    C0870-96R04 Practice for Conditioning of Thermal Insulating Materials
    C0871-08A Test Methods for Chemical Analysis of Thermal Insulation Materials for Leachable Chloride, Fluoride, Silicate, and Sodium Ions
    C0892-05 Specification for High-Temperature Fiber Blanket Thermal Insulation
    C0916-85R07 Specification for Adhesives for Duct Thermal Insulation
    C0921-10 Practice for Determining the Properties of Jacketing Materials for Thermal Insulation
    C0929-94R09 Practice for Handling, Transporting, Shipping, Storage, Receiving, and Application of Thermal Insulation Materials For Use in Contact with Austenitic Stainless Steel
    C0930-05 Classification of Potential Health and Safety Concerns Associated With Thermal Insulation Materials and Accessories
    C0945-05 Practice for Design Considerations and Spray Application of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
    C0950_C0950M-08 Practice for Repair of a Rigid Cellular Polyurethane Insulation System on Outdoor Service Vessels
    C0991-08E01 Specification for Flexible Fibrous Glass Insulation for Metal Buildings
    C1014-08 Specification for Spray-Applied Mineral Fiber Thermal and Sound Absorbing Insulation
    C1015-06 Practice for Installation of Cellulosic and Mineral Fiber Loose-Fill Thermal Insulation
    C1029-10 Specification for Spray-Applied Rigid Cellular Polyurethane Thermal Insulation
    C1041-85R07 Practice for In-Situ Measurements of Heat Flux in Industrial Thermal Insulation Using Heat Flux Transducers
    C1043-06 Practice for Guarded-Hot-Plate Design Using Circular Line-Heat Sources
    C1044-07 Practice for Using a Guarded-Hot-Plate Apparatus or Thin-Heater Apparatus in the Single-Sided Mode
    C1045-07 Practice for Calculating Thermal Transmission Properties Under Steady-State Conditions
    C1046-95R07 Practice for In-Situ Measurement of Heat Flux and Temperature on Building Envelope Components
    C1055-03R09 Guide for Heated System Surface Conditions that Produce Contact Burn Injuries
    C1057-03R10 Practice for Determination of Skin Contact Temperature from Heated Surfaces Using a Mathematical Model and Thermesthesiometer
    C1058-03R08 Practice for Selecting Temperatures for Evaluating and Reporting Thermal Properties of Thermal Insulation
    C1060-90R03 Practice for Thermographic Inspection of Insulation Installations in Envelope Cavities of Frame Buildings
    C1071-05E01 Specification for Fibrous Glass Duct Lining Insulation (Thermal and Sound Absorbing Material)
    C1086-09 Specification for Glass Fiber Mechanically Bonded Felt Thermal Insulation
    C1094-01R06 Guide for Flexible Removable Insulation Covers
    C1101_C1101M-06 Test Methods for Classifying the Flexibility or Rigidity of Mineral Fiber Blanket and Board Insulation
    C1104_C1104M-00R06 Test Method for Determining the Water Vapor Sorption of Unfaced Mineral Fiber Insulation
    C1114-06 Test Method for Steady-State Thermal Transmission Properties by Means of the Thin-Heater Apparatus
    C1126-04 Specification for Faced or Unfaced Rigid Cellular Phenolic Thermal Insulation
    C1129-89R08 Practice for Estimation of Heat Savings by Adding Thermal Insulation to Bare Valves and Flanges
    C1130-07 Practice for Calibrating Thin Heat Flux Transducers
    C1134-90R07E01 Test Method for Water Retention of Rigid Thermal Insulations Following Partial Immersion
    C1136-10 Specification for Flexible, Low Permeance Vapor Retarders for Thermal Insulation
    C1139-08 Specification for Fibrous Glass Thermal Insulation and Sound Absorbing Blanket and Board for Military Applications
    C1146-09 Guide for Prefabricated Panel and H\Nbar Insulation Systems for Vessels, Ducts and Equipment Operating at Temperatures Above Ambient Air
    C1149-08 Specification for Self-Supported Spray Applied Cellulosic Thermal Insulation
    C1153-97R03E01 Practice for Location of Wet Insulation in Roofing Systems Using Infrared Imaging
    C1155-95R07 Practice for Determining Thermal Resistance of Building Envelope Components from the In-Situ Data
    C1158-05 Practice for Installation and Use of Radiant Barrier Systems (RBS) in Building Construction
    C1199-09E01 Test Method for Measuring the Steady-State Thermal Transmittance of Fenestration Systems Using Hot Box Methods
    C1224-09 Specification for Reflective Insulation for Building Applications
    C1258-08 Test Method for Elevated Temperature and Humidity Resistance of Vapor Retarders for Insulation
    C1263-95R05E01 Test Method for Thermal Integrity of Flexible Water Vapor Retarders
    C1289-10 Specification for Faced Rigid Cellular Polyisocyanurate Thermal Insulation Board
    C1290-06E01 Specification for Flexible Fibrous Glass Blanket Insulation Used to Externally Insulate HVAC Ducts
    C1302-04 Guide for Selection and Use of Keywords for Thermal Insulation Test Methods and Standards
    C1303_C1303M-10 Test Method for Predicting Long-Term Thermal Resistance of Closed-Cell Foam Insulation
    C1304-08 Test Method for Assessing the Odor Emission of Thermal Insulation Materials
    C1313_C1313M-10 Specification for Sheet Radiant Barriers for Building Construction Applications
    C1320-05R09E01 Practice for Installation of Mineral Fiber Batt and Blanket Thermal Insulation for Light Frame Construction
    C1321-09 Practice for Installation and Use of Interior Radiation Control Coating Systems (IRCCS) in Building Construction
    C1335-04R09 Test Method for Measuring Non-Fibrous Content of Man-Made Rock and Slag Mineral Fiber Insulation
    C1338-08 Test Method for Determining Fungi Resistance of Insulation Materials and Facings
    C1340_C1340M-10 Practice for Estimation of Heat Gain or Loss Through Ceilings Under Attics Containing Radiant Barriers by Use of a Computer Program
    C1363-05 Test Method for Thermal Performance of Building Materials and Envelope Assemblies by Means of a Hot Box Apparatus
    C1371-04A Test Method for Determination of Emittance of Materials Near Room Temperature Using Portable Emissometers
    C1373-03 Practice for Determination of Thermal Resistance of Attic Insulation Systems Under Simulated Winter Conditions
    C1374-03R09 Test Method for Determination of Installed Thickness of Pneumatically Applied Loose-Fill Building Insulation
    C1393-08 Specification for Perpendicularly Oriented Mineral Fiber Roll and Sheet Thermal Insulation for Pipes and Tanks
    C1409-08 Guide for Measuring and Estimating Quantities of Insulated Piping and Components
    C1410-05AE01 Specification for Cellular Melamine Thermal and Sound-Absorbing Insulation
    C1423-98R03 Guide for Selecting Jacketing Materials for Thermal Insulation
    C1427-07E01 Specification for Extruded Preformed Flexible Cellular Polyolefin Thermal Insulation in Sheet and Tubular Form
    C1482-09 Specification for Polyimide Flexible Cellular Thermal and Sound Absorbing Insulation
    C1483_C1483M-04R09 Specification for Exterior Solar Radiation Control Coatings on Buildings
    C1484-09 Specification for Vacuum Insulation Panels
    C1485-06 Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using an Electric Radiant Heat Energy Source
    C1488-04E01 Practice for Simulated Aging of Cellulosic Loose-Fill Insulation
    C1497-04 Specification for Cellulosic Fiber Stabilized Thermal Insulation
    C1498-04A Test Method for Hygroscopic Sorption Isotherms of Building Materials
    C1511-04R09 Test Method for Determining the Water Retention (Repellency) Characteristics of Fibrous Glass Insulation (Aircraft Type)
    C1512-10 Test Method for Characterizing the Effect of Exposure to Environmental Cycling on Thermal Performance of Insulation Products
    C1534-07E01 Specification for Flexible Polymeric Foam Sheet Insulation Used as a Thermal and Sound Absorbing Liner for Duct Systems
    C1549-09 Test Method for Determination of Solar Reflectance Near Ambient Temperature Using a Portable Solar Reflectometer
    C1558-03R07 Guide for Development of Standard Data Records for Computerization of Thermal Transmission Test Data for Thermal Insulation
    C1559-04R09 Test Method for Determining Wicking of Fibrous Glass Blanket Insulation (Aircraft Type)
    C1574-04R08E01 Guide for Determining Blown Density of Pneumatically Applied Loose-Fill Mineral Fiber Thermal Insulation
    C1594-07 Specification for Polyimide Rigid Cellular Thermal Insulation
    C1616-07E01 Test Method for Determining the Moisture Content of Organic and Inorganic Insulation Materials by Weight
    C1617-09 Practice for Quantitative Accelerated Laboratory Evaluation of Extraction Solutions Containing Ions Leached from Thermal Insulation on Aqueous Corrosion of Metals
    C1630-06 Guide for Development of Coverage Charts for Loose-Fill Thermal Building Insulations
    C1631-08 Specification for Cellular Polypropylene Thermal Insulation
    C1639-10 Specification for Fabrication Of Cellular Glass Pipe And Tubing Insulation
    C1667-09 Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
    C1668-10 Specification for Externally Applied Reflective Insulation Systems on Rigid Duct in Heating, Ventilation, and Air Conditioning (HVAC) Systems
    C1676-08 Specification for Microporous Thermal Insulation
    C1685-08 Specification for Pneumatically Applied High-Temperature Fiber Thermal Insulation for Industrial Applications
    C1695-10 Specification for Fabrication of Flexible Removable and Reusable Blanket Insulation for Hot Service
    C1699-09 Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
    C1710-09 Guide for Installation of Flexible Closed Cell Preformed Insulation in Tube and Sheet Form
    C1729-10 Specification for Aluminum Jacketing for Insulation
    E0090-09 Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions and Elements
    E0096_E0096M-05 Test Methods for Water Vapor Transmission of Materials
    E0336-09 Test Method for Measurement of Airborne Sound Attenuation between Rooms in Buildings
    E0413-04 Classification for Rating Sound Insulation
    E0477-06A Test Method for Measuring Acoustical and Airflow Performance of Duct Liner Materials and Prefabricated Silencers
    E0492-09 Test Method for Laboratory Measurement of Impact Sound Transmission Through Floor-Ceiling Assemblies Using the Tapping Machine
    E0557-00R06E01 Guide for The Installation of Operable Partitions
    E0580_E0580M-10 Practice for Installation of Ceiling Suspension Systems for Acoustical Tile and Lay-in Panels in Areas Subject to Earthquake Ground Motions
    E0596-96R09 Test Method for Laboratory Measurement of Noise Reduction of Sound-Isolating Enclosures
    E0756-05R10 Test Method for Measuring Vibration-Damping Properties of Materials
    E0795-05 Practices for Mounting Test Specimens During Sound Absorption Tests
    E0966-04 Guide for Field Measurements of Airborne Sound Insulation of Building Facades and Facade Elements
    E0989-06 Classification for Determination of Impact Insulation Class (IIC)
    E1007-04E01 Test Method for Field Measurement of Tapping Machine Impact Sound Transmission Through Floor-Ceiling Assemblies and Associated Support Structures
    E1014-08 Guide for Measurement of Outdoor A-Weighted Sound Levels
    E1042-02R08E01 Classification for Acoustically Absorptive Materials Applied by Trowel or Spray
    E1050-08 Test Method for Impedance and Absorption of Acoustical Materials Using A Tube, Two Microphones and A Digital Frequency Analysis System
    E1110-06 Classification for Determination of Articulation Class
    E1111-07 Test Method for Measuring the Interzone Attenuation of Open Office Components
    E1123-86R09 Practices for Mounting Test Specimens for Sound Transmission Loss Testing of Naval and Marine Ship Bulkhead Treatment Materials
    E1124-10 Test Method for Field Measurement of Sound Power Level by the Two-Surface Method
    E1130-08 Test Method for Objective Measurement of Speech Privacy in Open Plan Spaces Using Articulation Index
    E1179-07 Specification for Sound Sources Used for Testing Open Office Components and Systems
    E1222-90R09 Test Method for Laboratory Measurement of the Insertion Loss of Pipe Lagging Systems
    E1264-08E01 Classification for Acoustical Ceiling Products
    E1265-04 Test Method for Measuring Insertion Loss of Pneumatic Exhaust Silencers
    E1289-08 Specification for Reference Specimen for Sound Transmission Loss
    E1332-10A Classification for Rating Outdoor-Indoor Sound Attenuation
    E1374-06 Guide for Open Office Acoustics and Applicable ASTM Standards
    E1414-06 Test Method for Airborne Sound Attenuation Between Rooms Sharing a Common Ceiling Plenum
    E1503-06 Test Method for Conducting Outdoor Sound Measurements Using a Digital Statistical Sound Analysis System
    E1573-09 Test Method for Evaluating Masking Sound in Open Offices Using A-Weighted and One-Third Octave Band Sound Pressure Levels
    E1574-98R06 Test Method for Measurement of Sound in Residential Spaces
    E1686-03 Guide for Selection of Environmental Noise Measurements and Criteria
    E1704-95R10 Guide for Specifying Acoustical Performance of Sound-Isolating Enclosures
    E1779-96AR04 Guide for Preparing a Measurement Plan for Conducting Outdoor Sound Measurements
    E1780-04 Guide for Measuring Outdoor Sound Received from a Nearby Fixed Source
    E2179-03R09 Test Method for Laboratory Measurement of the Effectiveness of Floor Coverings in Reducing Impact Sound Transmission Through Concrete Floors
    E2202-02R09 Practice for Measurement of Equipment-Generated Continuous Noise for Assessment of Health Hazards
    E2235-04E01 Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods
    E2249-02R08 Test Method for Laboratory Measurement of Airborne Transmission Loss of Building Partitions and Elements Using Sound Intensity
    E2459-05 Guide for Measurement of In-Duct Sound Pressure Levels from Large Industrial Gas Turbines and Fans
    E2611-09 Test Method for Measurement of Normal Incidence Sound Transmission of Acoustical Materials Based on the Transfer Matrix Method
    E2638-10 Test Method for Objective Measurement of the Speech Privacy Provided by a Closed Room

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2010
       Standards: 197
       Pages: 1416

    - 2009
       Standards: 202
       Pages: 1328