ASTM Volume 04.05, June 2010

    Chemical-Resistant Nonmetallic Materials; Vitrified Clay Pipe; Concrete Pipe; Fiber-Reinforced Cement Products; Mortars and Grouts; Masonry; Precast Concrete

    Table of Contents

    C0004-04R09 Specification for Clay Drain Tile and Perforated Clay Drain Tile
    C0012-09 Practice for Installing Vitrified Clay Pipe Lines
    C0014-07 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe
    C0014M-07 Specification for Nonreinforced Concrete Sewer, Storm Drain, and Culvert Pipe (Metric)
    C0032-09 Specification for Sewer and Manhole Brick (Made From Clay or Shale)
    C0034-09 Specification for Structural Clay Load-Bearing Wall Tile
    C0055-09 Specification for Concrete Building Brick
    C0056-09 Specification for Structural Clay Nonloadbearing Tile
    C0062-08 Specification for Building Brick (Solid Masonry Units Made From Clay or Shale)
    C0067-09 Test Methods for Sampling and Testing Brick and Structural Clay Tile
    C0073-05 Specification for Calcium Silicate Brick (Sand-Lime Brick)
    C0076-10 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe
    C0076M-10 Specification for Reinforced Concrete Culvert, Storm Drain, and Sewer Pipe (Metric)
    C0090-09 Specification for Loadbearing Concrete Masonry Units
    C0118-05A Specification for Concrete Pipe for Irrigation or Drainage
    C0118M-05A Specification for Concrete Pipe for Irrigation or Drainage (Metric)
    C0126-09 Specification for Ceramic Glazed Structural Clay Facing Tile, Facing Brick, and Solid Masonry Units
    C0129-06 Specification for Nonloadbearing Concrete Masonry Units
    C0139-05 Specification for Concrete Masonry Units for Construction of Catch Basins and Manholes
    C0140-09A Test Methods for Sampling and Testing Concrete Masonry Units and Related Units
    C0144-04 Specification for Aggregate for Masonry Mortar
    C0159-06 Specification for Vitrified Clay Filter Blocks
    C0212-00R06 Specification for Structural Clay Facing Tile
    C0216-07A Specification for Facing Brick (Solid Masonry Units Made from Clay or Shale)
    C0220-91R09 Specification for Flat Asbestos-Cement Sheets
    C0221-98R08 Specification for Corrugated Asbestos-Cement Sheets
    C0222-97R08 Specification for Asbestos-Cement Roofing Shingles
    C0223-98R08 Specification for Asbestos-Cement Siding
    C0267-01R06 Test Methods for Chemical Resistance of Mortars, Grouts, and Monolithic Surfacings and Polymer Concretes
    C0270-08A Specification for Mortar for Unit Masonry
    C0279-88R07 Specification for Chemical-Resistant Masonry Units
    C0287-98R08E01 Specification for Chemical-Resistant Sulfur Mortar
    C0296_C0296M-00R09E01 Specification for Asbestos-Cement Pressure Pipe
    C0301-04R09 Test Methods for Vitrified Clay Pipe
    C0307-03R08 Test Method for Tensile Strength of Chemical-Resistant Mortar, Grouts, and Monolithic Surfacings
    C0308-00R05 Test Methods for Working, Initial Setting, and Service Strength Setting Times of Chemical-Resistant Resin Mortars
    C0315-07 Specification for Clay Flue Liners and Chimney Pots
    C0321-00R05 Test Method for Bond Strength of Chemical-Resistant Mortars
    C0361-08 Specification for Reinforced Concrete Low-Head Pressure Pipe
    C0361M-08 Specification for Reinforced Concrete Low-Head Pressure Pipe (Metric)
    C0386-93R08 Practice for Use of Chemical-Resistant Sulfur Mortar
    C0395-01R06 Specification for Chemical-Resistant Resin Mortars
    C0397-00R05 Practice for Use of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
    C0398-98R08 Practice for Use of Hydraulic Cement Mortars in Chemical-Resistant Masonry
    C0399-98R08E01 Practice for Use of Chemical-Resistant Resin Mortars
    C0404-07 Specification for Aggregates for Masonry Grout
    C0410-08 Specification for Industrial Floor Brick
    C0412-05A Specification for Concrete Drain Tile
    C0412M-05A Specification for Concrete Drain Tile (Metric)
    C0413-01R06 Test Method for Absorption of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
    C0414-03R08 Test Method for Working, Setting, and Service Strength Setting Times of Chemically Setting Chemical-Resistant Silicate and Silica Mortars
    C0425-04R09 Specification for Compression Joints for Vitrified Clay Pipe and Fittings
    C0426-07 Test Method for Linear Drying Shrinkage of Concrete Masonry Units
    C0428-05R06 Specification for Asbestos-Cement Nonpressure Sewer Pipe
    C0443-05AE01 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets
    C0443M-07 Specification for Joints for Concrete Pipe and Manholes, Using Rubber Gaskets (Metric)
    C0444-03R09 Specification for Perforated Concrete Pipe
    C0444M-03R09 Specification for Perforated Concrete Pipe (Metric)
    C0458-98R06 Test Method for Organic Fiber Content of Asbestos-Cement Products
    C0459-97R06 Test Methods for Asbestos-Cement Flat Products
    C0466-03R08 Specification for Chemically Setting Silicate and Silica Chemical-Resistant Mortars
    C0476-09 Specification for Grout for Masonry
    C0478-09 Specification for Precast Reinforced Concrete Manhole Sections
    C0478M-09 Specification for Precast Reinforced Concrete Manhole Sections (Metric)
    C0479-04R08 Specification for Vitrified Clay Liner Plates
    C0497-05 Test Methods for Concrete Pipe, Manhole Sections, or Tile
    C0497M-05 Test Methods for Concrete Pipe, Manhole Sections, or Tile (Metric)
    C0500-07 Test Methods for Asbestos-Cement Pipe
    C0505-05A Specification for Nonreinforced Concrete Irrigation Pipe with Rubber Gasket Joints
    C0505M-05A Specification for Nonreinforced Concrete Irrigation Pipe With Rubber Gasket Joints (Metric)
    C0506-10 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe
    C0506M-10 Specification for Reinforced Concrete Arch Culvert, Storm Drain, and Sewer Pipe (Metric)
    C0507-10 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
    C0507M-10 Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
    C0508_C0508M-00R09E01 Specification for Asbestos-Cement Underdrain Pipe
    C0515-95R07 Specification for Chemical-Resistant Ceramic Tower Packings
    C0530-99R05 Specification for Structural Clay Nonloadbearing Screen Tile
    C0531-00R05 Test Method for Linear Shrinkage and Coefficient of Thermal Expansion of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
    C0541-98R06 Specification for Linings for Asbestos-Cement Pipe
    C0551-07 Specification for Asbestos-Cement Fiberboard Insulating Panels
    C0579-01R06 Test Methods for Compressive Strength of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
    C0580-02R08 Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
    C0652-09 Specification for Hollow Brick (Hollow Masonry Units Made From Clay or Shale)
    C0654-05A Specification for Porous Concrete Pipe
    C0654M-05A Specification for Porous Concrete Pipe (Metric)
    C0655-09 Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
    C0655M-09 Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
    C0658-98R08 Specification for Chemical-Resistant Resin Grouts for Brick or Tile
    C0659-90R08 Specification for Asbestos-Cement Organic-Foam Core Insulating Panels
    C0663-98R08 Specification for Asbestos-Cement Storm Drain Pipe
    C0668-98R08 Specification for Asbestos-Cement Transmission Pipe
    C0700-09 Specification for Vitrified Clay Pipe, Extra Strength, Standard Strength, and Perforated
    C0722-04 Specification for Chemical-Resistant Monolithic Floor Surfacings
    C0723-98R08 Practice for Chemical-Resistant Resin Grouts for Brick or Tile
    C0725-90R08 Specification for Semidense Mineral Fiber Siding
    C0744-09 Specification for Prefaced Concrete and Calcium Silicate Masonry Units
    C0746-90R08 Specification for Corrugated Asbestos-Cement Sheets for Bulkheading
    C0780-09 Test Method for Preconstruction and Construction Evaluation of Mortars for Plain and Reinforced Unit Masonry
    C0811-98R08 Practice for Surface Preparation of Concrete for Application of Chemical-Resistant Resin Monolithic Surfacings
    C0822-08B Terminology Relating to Concrete Pipe and Related Products
    C0825-06 Specification for Precast Concrete Barriers
    C0828-06 Test Method for Low-Pressure Air Test of Vitrified Clay Pipe Lines
    C0857-07 Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
    C0858-10 Specification for Underground Precast Concrete Utility Structures
    C0868-02R08 Test Method for Chemical Resistance of Protective Linings
    C0875-98R08 Specification for Asbestos-Cement Conduit
    C0877-08 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections
    C0877M-02R09 Specification for External Sealing Bands for Concrete Pipe, Manholes, and Precast Box Sections (Metric)
    C0887-05 Specification for Packaged, Dry, Combined Materials for Surface Bonding Mortar
    C0890-06 Practice for Minimum Structural Design Loading for Monolithic or Sectional Precast Concrete Water and Wastewater Structures
    C0891-09 Practice for Installation of Underground Precast Concrete Utility Structures
    C0896-04R09 Terminology Relating to Clay Products
    C0901-09 Specification for Prefabricated Masonry Panels
    C0902-09 Specification for Pedestrian and Light Traffic Paving Brick
    C0904-01R06 Terminology Relating to Chemical-Resistant Nonmetallic Materials
    C0905-01R06 Test Methods for Apparent Density of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes
    C0913-08 Specification for Precast Concrete Water and Wastewater Structures
    C0915-79R02 Specification for Precast Reinforced Concrete Crib Wall Members
    C0923-08 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals
    C0923M-08B Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures, Pipes, and Laterals (Metric)
    C0924-02R09 Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method
    C0924M-02R09 Practice for Testing Concrete Pipe Sewer Lines by Low-Pressure Air Test Method (Metric)
    C0935-80R02 Specification for General Requirements for Prestressed Concrete Poles Statically Cast
    C0936_C0936M-09 Specification for Solid Concrete Interlocking Paving Units
    C0946-10 Practice for Construction of Dry-Stacked, Surface-Bonded Walls
    C0947-03R09 Test Method for Flexural Properties of Thin-Section Glass-Fiber-Reinforced Concrete (Using Simple Beam With Third-Point Loading)
    C0948-81R09 Test Method for Dry and Wet Bulk Density, Water Absorption, and Apparent Porosity of Thin Sections of Glass-Fiber Reinforced Concrete
    C0952-02R09 Test Method for Bond Strength of Mortar to Masonry Units
    C0966-98R08 Guide for Installing Asbestos-Cement Nonpressure Pipe
    C0969-02R09 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
    C0969M-02R09 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
    C0980-88R07 Specification for Industrial Chimney Lining Brick
    C0985-04E01 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe
    C0985M-04E01 Specification for Nonreinforced Concrete Specified Strength Culvert, Storm Drain, and Sewer Pipe (Metric)
    C0990-09 Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants
    C0990M-09 Specification for Joints for Concrete Pipe, Manholes, and Precast Box Sections Using Preformed Flexible Joint Sealants (Metric)
    C1006-07 Test Method for Splitting Tensile Strength of Masonry Units
    C1019-09 Test Method for Sampling and Testing Grout
    C1037-08 Practice for Inspection of Underground Precast Concrete Utility Structures
    C1072-06 Test Method for Measurement of Masonry Flexural Bond Strength
    C1080-98R08 Specification for Asbestos-Cement Products Other Than Fill For Cooling Towers
    C1081-98R08 Specification for Asbestos-Cement Corrugated Fill For Use in Cooling Towers
    C1082-98R08 Specification for Asbestos-Cement Flat Sheet for Cooling Tower Fill
    C1088-09A Specification for Thin Veneer Brick Units Made From Clay or Shale
    C1089-06 Specification for Spun Cast Prestressed Concrete Poles
    C1091-03AR08 Test Method for Hydrostatic Infiltration Testing of Vitrified Clay Pipe Lines
    C1093-09 Practice for Accreditation of Testing Agencies for Masonry
    C1096-07 Test Method for Determination of Wood Fiber in Asbestos Cement
    C1103-03R09 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines
    C1103M-03R09 Practice for Joint Acceptance Testing of Installed Precast Concrete Pipe Sewer Lines (Metric)
    C1106-00R05 Test Methods for Chemical Resistance and Physical Properties of Carbon Brick
    C1119_C1119M-90R09E01 Test Method for Vacuum Drainage of Asbestos-Cement Mixes
    C1120-98R06 Test Method for Wash Test of Asbestos
    C1121_C1121M-04R09E01 Test Method for Turner and Newall (T and N) Wet-Length Classification of Asbestos
    C1122_C1122M-90R09E01 Test Method for Wet Volume of Asbestos
    C1123_C1123M-90R09E01 Test Method for Compressibility and Recovery of Asbestos
    C1124_C1124M-90R09E01 Test Method for Kerosene Retention of Asbestos
    C1125-89R09 Test Method for Penetration Index of Asbestos
    C1131-95R07 Practice for Least Cost (Life Cycle) Analysis of Concrete Culvert, Storm Sewer, and Sanitary Sewer Systems
    C1142-95R07 Specification for Extended Life Mortar for Unit Masonry
    C1147-01R06 Practice for Determining the Short Term Tensile Weld Strength of Chemical-Resistant Thermoplastics
    C1148-92AR08 Test Method for Measuring the Drying Shrinkage of Masonry Mortar
    C1154-06 Terminology for Non-Asbestos Fiber-Reinforced Cement Products
    C1159-98R08 Specification for Sulfur Polymer Cement and Sulfur Modifier for Use in Chemical-Resistant, Rigid Sulfur Concrete
    C1160-97R08 Specification for Chemical-Resistant Carbon Brick
    C1162_C1162M-90R09E01 Test Method for Loose Density of Asbestos
    C1167-03R09 Specification for Clay Roof Tiles
    C1180-07 Terminology of Mortar and Grout for Unit Masonry
    C1181-00R05 Test Methods for Compressive Creep of Chemical-Resistant Polymer Machinery Grouts
    C1185-08 Test Methods for Sampling and Testing Non-Asbestos Fiber-Cement Flat Sheet, Roofing and Siding Shingles, and Clapboards
    C1186-08 Specification for Flat Fiber-Cement Sheets
    C1194-03 Test Method for Compressive Strength of Architectural Cast Stone
    C1195-03 Test Method for Absorption of Architectural Cast Stone
    C1196-09 Test Method for In Situ Compressive Stress Within Solid Unit Masonry Estimated Using Flatjack Measurements
    C1197-09 Test Method for In Situ Measurement of Masonry Deformability Properties Using the Flatjack Method
    C1208_C1208M-08 Specification for Vitrified Clay Pipe and Joints for Use in Microtunneling, Sliplining, Pipe Bursting, and Tunnels
    C1214-02R09 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method
    C1214M-02R09 Test Method for Concrete Pipe Sewerlines by Negative Air Pressure (Vacuum) Test Method (Metric)
    C1225-08 Specification for Fiber-Cement Roofing Shingles, Shakes, and Slates
    C1227-09 Specification for Precast Concrete Septic Tanks
    C1228-96R09 Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete
    C1229-94R09 Test Method for Determination of Glass Fiber Content in Glass Fiber Reinforced Concrete (GFRC) (Wash-Out Test)
    C1230-96R09 Test Method for Performing Tension Tests on Glass-Fiber Reinforced Concrete (GFRC) Bonding Pads
    C1232-10 Terminology of Masonry
    C1244-05AE01 Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill
    C1244M-05AE01 Test Method for Concrete Sewer Manholes by the Negative Air Pressure (Vacuum) Test Prior to Backfill (Metric)
    C1261-07 Specification for Firebox Brick for Residential Fireplaces
    C1262-09 Test Method for Evaluating the Freeze-Thaw Durability of Dry-Cast Segmental Retaining Wall Units and Related Concrete Units
    C1272-07 Specification for Heavy Vehicular Paving Brick
    C1283-07A Practice for Installing Clay Flue Lining
    C1288-99R04E01 Specification for Discrete Non-Asbestos Fiber-Cement Interior Substrate Sheets
    C1298-95R07 Guide for Design and Construction of Brick Liners for Industrial Chimneys
    C1312-97R08 Practice for Making and Conditioning Chemical-Resistant Sulfur Polymer Cement Concrete Test Specimens in the Laboratory
    C1314-09 Test Method for Compressive Strength of Masonry Prisms
    C1319-01R06 Specification for Concrete Grid Paving Units
    C1324-05 Test Method for Examination and Analysis of Hardened Masonry Mortar
    C1325-08B Specification for Non-Asbestos Fiber-Mat Reinforced Cementitious Backer Units
    C1339-02R08 Test Method for Flowability and Bearing Area of Chemical-Resistant Polymer Machinery Grouts
    C1357-09 Test Methods for Evaluating Masonry Bond Strength
    C1364-07 Specification for Architectural Cast Stone
    C1370-00R05 Test Method for Determining Chemical Resistance of Aggregates for Use in Chemical-Resistant Sulfur Polymer Cement Concrete and Other Chemical-Resistant Polymer Concretes
    C1372-09 Specification for Dry-Cast Segmental Retaining Wall Units
    C1384-06A Specification for Admixtures for Masonry Mortars
    C1386-07 Specification for Precast Autoclaved Aerated Concrete (AAC) Wall Construction Units
    C1400-01R07 Guide for Reduction of Efflorescence Potential in New Masonry Walls
    C1403-06 Test Method for Rate of Water Absorption of Masonry Mortars
    C1405-08 Specification for Glazed Brick (Single Fired, Brick Units)
    C1417-08 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design
    C1417M-08 Specification for Manufacture of Reinforced Concrete Sewer, Storm Drain, and Culvert Pipe for Direct Design (Metric)
    C1433-10 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers
    C1433M-10 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers (Metric)
    C1447_C1447M-04E01 Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
    C1448_C1448M-05 Specification for Non-Asbestos Fiber-Cement Conduit
    C1449_C1449M-05A Specification for Non-Asbestos Fiber-Cement Nonpressure Sewer Pipe
    C1450_C1450M-04 Specification for Non-Asbestos Fiber-Cement Storm Drain Pipe
    C1452-00R06 Specification for Reinforced Autoclaved Aerated Concrete Elements
    C1459-04R09 Specification for Performance of Non-Asbestos Fiber-Reinforced Cement Shake, Shingle, and Slate Roofing Systems
    C1478-08 Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals
    C1478M-08A Specification for Storm Drain Resilient Connectors Between Reinforced Concrete Storm Sewer Structures, Pipes, and Laterals (Metric)
    C1479-07A Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations
    C1479M-07A Practice for Installation of Precast Concrete Sewer, Storm Drain, and Culvert Pipe Using Standard Installations (Metric)
    C1486-00R08 Practice for Testing Chemical-Resistant Broadcast and Slurry-Broadcast Resin Monolithic Floor Surfacings
    C1491-03R09 Specification for Concrete Roof Pavers
    C1492-03R09 Specification for Concrete Roof Tile
    C1504-04E02 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains
    C1504M-04E02 Specification for Manufacture of Precast Reinforced Concrete Three-Sided Structures for Culverts and Storm Drains (Metric)
    C1530-04 Specification for Non-Asbestos Fiber-Cement Roofing Shakes, Shingles, and Slates with Designed Varying Profiles and Thicknesses
    C1531-09 Test Methods for In Situ Measurement Of Masonry Mortar Joint Shear Strength Index
    C1532-06 Practice for Selection, Removal, and Shipment of Manufactured Masonry Units and Masonry Specimens from Existing Construction
    C1552-09A Practice for Capping Concrete Masonry Units, Related Units and Masonry Prisms for Compression Testing
    C1560-03R09 Test Method for Hot Water Accelerated Aging of Glass-Fiber Reinforced Cement-Based Composites
    C1568-08 Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Mechanical Uplift Resistance Method)
    C1569-03R09 Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Wind Tunnel Method)
    C1570-03R09 Test Method for Wind Resistance of Concrete and Clay Roof Tiles (Air Permeability Method)
    C1577-10 Specification for Precast Reinforced Concrete Monolithic Box Sections for Culverts, Storm Drains, and Sewers Designed According to AASHTO LRFD
    C1586-05 Guide for Quality Assurance of Mortars
    C1587-09 Practice for Preparation of Field Removed Manufactured Masonry Units and Masonry Specimens for Testing
    C1591-04 Test Method for Determination of the Modulus of Elasticity of AAC
    C1601-09 Test Method for Field Determination of Water Penetration of Masonry Wall Surfaces
    C1613-10 Specification for Precast Concrete Grease Interceptor Tanks
    C1618-05 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure
    C1618M-05 Test Method for Concrete Sanitary Sewer Pipe by Negative (Vacuum) or Positive Air Pressure (Metric)
    C1619-05 Specification for Elastomeric Seals for Joining Concrete Structures
    C1623-06 Specification for Manufactured Concrete Masonry Lintels
    C1628-06 Specification for Joints for Concrete Gravity Flow Sewer Pipe, Using Rubber Gaskets
    C1634-09 Specification for Concrete Facing Brick
    C1644-06 Specification for Resilient Connectors Between Reinforced Concrete On-Site Wastewater Tanks and Pipes
    C1645_C1645M-09 Test Method for Freeze-thaw and De-icing Salt Durability of Solid Concrete Interlocking Paving Units
    C1660-09 Specification for Thin-bed Mortar for Autoclaved Aerated Concrete (AAC) Masonry
    C1666_C1666M-08 Specification for Alkali Resistant (AR) Glass Fiber for GFRC and Fiber-Reinforced Concrete and Cement
    C1677-09 Specification for Joints for Concrete Box, Using Rubber Gaskets
    C1686-09 Practice for Installation and Testing of Reinforced Autoclaved Aerated Concrete (AAC) Units
    C1691-09 Specification for Unreinforced Autoclaved Aerated Concrete (AAC) Masonry Units
    C1692-09 Practice for Construction and Testing of Autoclaved Aerated Concrete (AAC) Masonry
    C1693-09E01 Specification for Autoclaved Aerated Concrete (AAC)
    C1694-09 Specification for Reinforced Autoclaved Aerated Concrete (AAC) Elements
    C1704_C1704M-09A Test Method for Sampling and Testing Structural Cementitious Panels
    C1705_C1705M-09 Specification for Structural Cementitious Panels
    C1713-10 Specification for Mortars for the Repair of Historic Masonry
    C1714_C1714M-09 Specification for Preblended Dry Mortar Mix for Unit Masonry
    C1715-09 Test Method for Evaluation of Water Leakage Performance of Masonry Wall Drainage Systems
    C1717-09 Test Methods for Conducting Strength Tests of Masonry Wall Panels
    D0299_D0299M-04R09E01 Specification for Asbestos Yarns
    D0315_D0315M-95R09E01 Specification for Woven Asbestos Tape
    D0375_D0375M-95R09E01 Specification for Asbestos Roving
    D0628_D0628M-95R09E01 Specification for Asbestos Tubular Sleeving
    D1061_D1061M-95R09E01 Specification for Asbestos Lap
    D1118_D1118M-95R09E01 Test Method for Magnetic Rating of Asbestos Fiber and Asbestos Textiles
    D1571_D1571M-95R09E01 Specification for Woven Asbestos Cloth
    D1573_D1573M-95R09E01 Test Method for Heat Aging of Asbestos Textiles
    D1918_D1918M-95R09E01 Test Method for Asbestos Content of Asbestos Textiles
    D2100_D2100M-95R09E01 Specification for Asbestos Textiles Used for Electrical Insulating Purposes
    D2589-88R06E01 Test Method for McNett Wet Classification of Dual Asbestos Fiber
    D2590-98R06E01 Test Method for Sampling Chrysotile Asbestos
    D2752-88R06 Test Methods for Air Permeability of Asbestos Fibers
    D2946-01R05 Terminology for Asbestos and Asbestos\NCement Products
    D2947-88R06 Test Method for Screen Analysis of Asbestos Fibers
    D2985-92R06 Test Method for Color of Asbestos
    D2987-88R06 Test Method for Moisture Content of Asbestos Fiber
    D3639-92R06E01 Test Method for Classification of Asbestos by Quebec Standard Test
    D3752-98R06 Test Method for Strength Imparted by Asbestos to a Cementitious Matrix
    D3880_D3880M-90R09E01 Test Method for Asbestos Strength Units
    E0514_E0514M-09 Test Method for Water Penetration and Leakage Through Masonry
    E0518-09 Test Methods for Flexural Bond Strength of Masonry
    E0519-07 Test Method for Diagonal Tension (Shear) in Masonry Assemblages

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2010
       Standards: 294
       Pages: 1544

    - 2009
       Standards: 281
       Pages: 1456