ASTM Volume 04.03, June 2010

    Road and Paving Materials; Vehicle-Pavement Systems

    Table of Contents

    D0005-06E01 Test Method for Penetration of Bituminous Materials
    D0008-02 Terminology Relating to Materials for Roads and Pavements
    D0020-03R09 Test Method for Distillation of Road Tars
    D0070-09E01 Test Method for Density of Semi-Solid Bituminous Materials (Pycnometer Method)
    D0075_D0075M-09 Practice for Sampling Aggregates
    D0098-05 Specification for Calcium Chloride
    D0113-07 Test Method for Ductility of Bituminous Materials
    D0139-07 Test Method for Float Test for Bituminous Materials
    D0140_D0140M-09 Practice for Sampling Bituminous Materials
    D0242_D0242M-09 Specification for Mineral Filler For Bituminous Paving Mixtures
    D0243-08 Test Method for Residue of Specified Penetration
    D0244-09 Test Methods and Practices for Emulsified Asphalts
    D0345-02 Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
    D0402-08 Test Method for Distillation of Cutback Asphaltic (Bituminous) Products
    D0448-08 Classification for Sizes of Aggregate for Road and Bridge Construction
    D0490-92R05 Specification for Road Tar
    D0517-98R08 Specification for Asphalt Plank
    D0545-08 Test Methods for Preformed Expansion Joint Fillers for Concrete Construction (Nonextruding and Resilient Types)
    D0546-05 Test Method for Sieve Analysis of Mineral Filler for Bituminous Paving Mixtures
    D0633-97R05 Volume Correction Table for Road Tar
    D0692_D0692M-09 Specification for Coarse Aggregate for Bituminous Paving Mixtures
    D0946_D0946M-09A Specification for Penetration-Graded Asphalt Cement for Use in Pavement Construction
    D0977-05 Specification for Emulsified Asphalt
    D0979-01R06E01 Practice for Sampling Bituminous Paving Mixtures
    D0994-98R03 Specification for Preformed Expansion Joint Filler for Concrete (Bituminous Type)
    D1073-07 Specification for Fine Aggregate for Bituminous Paving Mixtures
    D1074-09 Test Method for Compressive Strength of Bituminous Mixtures
    D1075-07 Test Method for Effect of Water on Compressive Strength of Compacted Bituminous Mixtures
    D1139_D1139M-09 Specification for Aggregate for Single or Multiple Bituminous Surface Treatments
    D1188-07 Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Coated Samples
    D1195_D1195M-09 Test Method for Repetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
    D1196-93R04 Test Method for Nonrepetitive Static Plate Load Tests of Soils and Flexible Pavement Components, for Use in Evaluation and Design of Airport and Highway Pavements
    D1369-84R06 Practice for Quantities of Materials for Bituminous Surface Treatments
    D1461-85R06 Test Method for Moisture or Volatile Distillates in Bituminous Paving Mixtures
    D1560-09A Test Methods for Resistance to Deformation and Cohesion of Bituminous Mixtures by Means of Hveem Apparatus
    D1561-92R05E01 Practice for Preparation of Bituminous Mixture Test Specimens by Means of California Kneading Compactor
    D1665-98R09 Test Method for Engler Specific Viscosity of Tar Products
    D1751-04R08 Specification for Preformed Expansion Joint Filler for Concrete Paving and Structural Construction (Nonextruding and Resilient Bituminous Types)
    D1752-04AR08 Specification for Preformed Sponge Rubber Cork and Recycled PVC Expansion Joint Fillers for Concrete Paving and Structural Construction
    D1754_D1754M-09 Test Method for Effects of Heat and Air on Asphaltic Materials (Thin-Film Oven Test)
    D1856-09 Test Method for Recovery of Asphalt From Solution by Abson Method
    D1985-03R08 Practice for Preparing Concrete Blocks for Testing Sealants, for Joints and Cracks
    D2026-97R10 Specification for Cutback Asphalt (Slow-Curing Type)
    D2027-97R04 Specification for Cutback Asphalt (Medium-Curing Type)
    D2028-97R04 Specification for Cutback Asphalt (Rapid-Curing Type)
    D2041-03A Test Method for Theoretical Maximum Specific Gravity and Density of Bituminous Paving Mixtures
    D2042-09 Test Method for Solubility of Asphalt Materials in Trichloroethylene
    D2170-07 Test Method for Kinematic Viscosity of Asphalts (Bitumens)
    D2171-07E01 Test Method for Viscosity of Asphalts by Vacuum Capillary Viscometer
    D2172-05 Test Methods for Quantitative Extraction of Bitumen From Bituminous Paving Mixtures
    D2397-05 Specification for Cationic Emulsified Asphalt
    D2399-83R05 Practice for Selection of Cutback Asphalts
    D2419-09 Test Method for Sand Equivalent Value of Soils and Fine Aggregate
    D2489_D2489M-08 Practice for Estimating Degree of Particle Coating of Bituminous-Aggregate Mixtures
    D2493-01E01 Viscosity-Temperature Chart for Asphalts
    D2493_D2493M-09 Viscosity-Temperature Chart for Asphalts
    D2628-91R05 Specification for Preformed Polychloroprene Elastomeric Joint Seals for Concrete Pavements
    D2726-09 Test Method for Bulk Specific Gravity and Density of Non-Absorptive Compacted Bituminous Mixtures
    D2728-98R09 Practice for Paving Uses and Application Temperatures for Road Tars
    D2835-89R07 Specification for Lubricant for Installation of Preformed Compression Seals in Concrete Pavements
    D2872-04 Test Method for Effect of Heat and Air on a Moving Film of Asphalt (Rolling Thin-Film Oven Test)
    D2940_D2940M-09 Specification for Graded Aggregate Material For Bases or Subbases for Highways or Airports
    D2950-09 Test Method for Density of Bituminous Concrete in Place by Nuclear Methods
    D2995-99R09 Practice for Estimating Application Rate of Bituminous Distributors
    D3042-09 Test Method for Insoluble Residue in Carbonate Aggregates
    D3141_D3141M-09 Specification for Asphalt for Undersealing Portland-Cement Concrete Pavements
    D3142-05 Test Method for Specific Gravity, API Gravity, or Density of Cutback Asphalts by Hydrometer Method
    D3143-08 Test Method for Flash Point of Cutback Asphalt with Tag Open-Cup Apparatus
    D3203-05 Test Method for Percent Air Voids in Compacted Dense and Open Bituminous Paving Mixtures
    D3279-07 Test Method for -Heptane Insolubles
    D3289-08 Test Method for Density of Semi-Solid and Solid Bituminous Materials (Nickel Crucible Method)
    D3319-06 Practice for the Accelerated Polishing of Aggregates Using the British Wheel
    D3381_D3381M-09A Specification for Viscosity-Graded Asphalt Cement for Use in Pavement Construction
    D3387-83R03 Test Method for Compaction and Shear Properties of Bituminous Mixtures by Means of the U.S. Corps of Engineers Gyratory Testing Machine (GTM)
    D3398-00R06 Test Method for Index of Aggregate Particle Shape and Texture
    D3406-95R06 Specification for Joint Sealant, Hot-Applied, Elastomeric-Type, for Portland Cement Concrete Pavements
    D3496-99R05 Practice for Preparation of Bituminous Mixture Specimens for Dynamic Modulus Testing
    D3542-08 Specification for Preformed Polychloroprene Elastomeric Joint Seals for Bridges
    D3549-03 Test Method for Thickness or Height of Compacted Bituminous Paving Mixture Specimens
    D3625-96R05 Practice for Effect of Water on Bituminous-Coated Aggregate Using Boiling Water
    D3628-08 Practice for Selection and Use of Emulsified Asphalts
    D3633-98R06 Test Method for Electrical Resistivity of Membrane-Pavement Systems
    D3665-07 Practice for Random Sampling of Construction Materials
    D3666-09A Specification for Minimum Requirements for Agencies Testing and Inspecting Road and Paving Materials
    D3744-03 Test Method for Aggregate Durability Index
    D3910-07 Practices for Design, Testing, and Construction of Slurry Seal
    D3963_D3963M-01R07 Specification for Fabrication and Jobsite Handling of Epoxy-Coated Steel Reinforcing Bars
    D4013-09 Practice for Preparation of Test Specimens of Bituminous Mixtures by Means of Gyratory Shear Compactor
    D4014-03R07 Specification for Plain and Steel-Laminated Elastomeric Bearings for Bridges
    D4070-08 Specification for Adhesive Lubricant for Installation of Preformed Elastomeric Bridge Compression Seals in Concrete Structures
    D4071-84R05 Practice for Use of Portland Cement Concrete Bridge Deck Water Barrier Membrane Systems
    D4124-09 Test Method for Separation of Asphalt into Four Fractions
    D4125-05 Test Methods for Asphalt Content of Bituminous Mixtures by the Nuclear Method
    D4215-07 Specification for Cold-Mixed, Cold-Laid Bituminous Paving Mixtures
    D4280-08 Specification for Extended Life Type, Nonplowable, Raised Retroreflective Pavement Markers
    D4311_D4311M-09 Practice for Determining Asphalt Volume Correction to a Base Temperature
    D4383-05E01 Specification for Plowable, Raised Retroreflective Pavement Markers
    D4460-97R09 Practice for Calculating Precision Limits Where Values are Calculated from Other Test Methods
    D4469-01R06 Practice for Calculating Percent Asphalt Absorption by the Aggregate in an Asphalt Pavement Mixture
    D4505-05 Specification for Preformed Retroreflective Pavement Marking Tape for Extended Service Life
    D4552-92R04 Practice for Classifying Hot-Mix Recycling Agents
    D4561-96R06 Practice for Quality Control Systems for Organizations Producing and Applying Bituminous Paving Materials
    D4580-03R07 Practice for Measuring Delaminations in Concrete Bridge Decks by Sounding
    D4592-05 Specification for Preformed Retroreflective Pavement Marking Tape for Limited Service Life
    D4602-93R08 Guide for Nondestructive Testing of Pavements Using Cyclic-Loading Dynamic Deflection Equipment
    D4694-09 Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
    D4695-03R08 Guide for General Pavement Deflection Measurements
    D4748-06 Test Method for Determining the Thickness of Bound Pavement Layers Using Short-Pulse Radar
    D4788-03R07 Test Method for Detecting Delaminations in Bridge Decks Using Infrared Thermography
    D4791-05E01 Test Method for Flat Particles, Elongated Particles, or Flat and Elongated Particles in Coarse Aggregate
    D4792-00R06 Test Method for Potential Expansion of Aggregates from Hydration Reactions
    D4867_D4867M-09 Test Method for Effect of Moisture on Asphalt Concrete Paving Mixtures
    D4887-99R03 Practice for Preparation of Viscosity Blends for Hot Recycled Bituminous Materials
    D4956-09E01 Specification for Retroreflective Sheeting for Traffic Control
    D4957-08 Test Method for Apparent Viscosity of Asphalt Emulsion Residues and Non-Newtonian Bitumens by Vacuum Capillary Viscometer
    D5078-95R06 Specification for Crack Filler, Hot-Applied, for Asphalt Concrete and Portland Cement Concrete Pavements
    D5106-08 Specification for Steel Slag Aggregates for Bituminous Paving Mixtures
    D5148-97R02 Test Method for Centrifuge Kerosine Equivalent
    D5167-03 Practice for Melting of Hot-Applied Joint and Crack Sealant and Filler for Evaluation
    D5249-95R06 Specification for Backer Material for Use with Cold- and Hot-Applied Joint Sealants in Portland-Cement Concrete and Asphalt Joints
    D5329-09 Test Methods for Sealants and Fillers, Hot-Applied, for Joints and Cracks in Asphaltic and Portland Cement Concrete Pavements
    D5340-10 Test Method for Airport Pavement Condition Index Surveys
    D5360-09 Practice for Design and Construction of Bituminous Surface Treatments
    D5361-06 Practice for Sampling Compacted Bituminous Mixtures for Laboratory Testing
    D5404-03 Practice for Recovery of Asphalt from Solution Using the Rotary Evaporator
    D5444-08 Test Method for Mechanical Size Analysis of Extracted Aggregate
    D5505-06 Practice for Classifying Emulsified Recycling Agents
    D5506-08 Practice for Organizations Engaged in the Certification of Personnel Testing and Inspecting Bituminous Paving Materials
    D5546-09 Test Method for Solubility of Asphalt Binders in Toluene by Centrifuge
    D5581-07AE01 Test Method for Resistance to Plastic Flow of Bituminous Mixtures Using Marshall Apparatus (6 inch-Diameter Specimen)
    D5624-02R07 Test Method for Determining the Transverse-Aggregate Spread Rate for Surface Treatment Applications
    D5710-05 Specification for Trinidad Lake Modified Asphalt
    D5711-03 Test Method for Determining the Adherent Coating on Coarse Aggregates
    D5801-95R06E01 Test Method for Toughness and Tenacity of Bituminous Materials
    D5821-01R06 Test Method for Determining the Percentage of Fractured Particles in Coarse Aggregate
    D5858-96R08 Guide for Calculating Equivalent Elastic Moduli of Pavement Materials Using Layered Elastic Theory
    D5893-04 Specification for Cold Applied, Single Component, Chemically Curing Silicone Joint Sealant for Portland Cement Concrete Pavements
    D5973-97R07 Specification for Elastomeric Strip Seals with Steel Locking Edge Rails Used in Expansion Joint Sealing
    D5977-03R07 Specification for High Load Rotational Spherical Bearings for Bridges and Structures
    D6084-06 Test Method for Elastic Recovery of Bituminous Materials by Ductilometer
    D6087-08 Test Method for Evaluating Asphalt-Covered Concrete Bridge Decks Using Ground Penetrating Radar
    D6114_D6114M-09 Specification for Asphalt-Rubber Binder
    D6153-97R07 Specification for Materials for Bridge Deck Waterproofing Membrane Systems
    D6154-09 Specification for Chemically Modified Asphalt Cement for Use in Pavement Construction
    D6155-06 Specification for Nontraditional Coarse Aggregates for Bituminous Paving Mixtures
    D6297-01R07 Standard Specification for Asphaltic Plug Joints for Bridges
    D6307-05R10 Test Method for Asphalt Content of Hot-Mix Asphalt by Ignition Method
    D6372-05 Practice for Design, Testing, and Construction of Micro-Surfacing
    D6373-07E01 Specification for Performance Graded Asphalt Binder
    D6390-05 Test Method for Determination of Draindown Characteristics in Uncompacted Asphalt Mixtures
    D6433-09 Practice for Roads and Parking Lots Pavement Condition Index Surveys
    D6521-08 Practice for Accelerated Aging of Asphalt Binder Using a Pressurized Aging Vessel (PAV)
    D6607-00R09 Practice for Inclusion of Precision Statement Variation in Specification Limits
    D6608-00R06 Practice for the Identification of Trinidad Lake Asphalt in Asphalt Mixes
    D6626-09 Specification for Performance Graded Trinidad Lake Modified Asphalt Binder
    D6627-01R06 Test Method for Determination of a Volatile Distillate Fraction of Cold Asphalt Mixtures
    D6628-03 Specification for Color of Pavement Marking Materials
    D6648-08 Test Method for Determining the Flexural Creep Stiffness of Asphalt Binder Using the Bending Beam Rheometer (BBR)
    D6690-07 Specification for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements
    D6703-07 Test Method for Automated Heithaus Titrimetry
    D6704-08 Test Method for Determining the Workability of Asphalt Cold Mix Patching Material
    D6723-02 Test Method for Determining the Fracture Properties of Asphalt Binder in Direct Tension (DT)
    D6752-09 Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method
    D6816-02 Practice for Determining Low-Temperature Performance Grade (PG) of Asphalt Binders
    D6847-02 Test Method for Quantitative Extraction and Recovery of Asphalt Binder from Asphalt Mixtures
    D6857-09 Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
    D6924-03R07 Specification for Preformed Thermoplastic Vulcanizate Elastomeric Joint Seals for Bridges
    D6925-09 Test Method for Preparation and Determination of the Relative Density of Hot Mix Asphalt (HMA) Specimens by Means of the Superpave Gyratory Compactor
    D6926-04 Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
    D6927-06 Test Method for Marshall Stability and Flow of Bituminous Mixtures
    D6928-08E01 Test Method for Resistance of Coarse Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
    D6929-04 Practice for Freezing of Emulsified Asphalts
    D6930-04 Test Method for Settlement and Storage Stability of Emulsified Asphalts
    D6931-07 Test Method for Indirect Tensile (IDT) Strength of Bituminous Mixtures
    D6932_D6932M-08 Guide for Materials and Construction of Open-Graded Friction Course Plant Mixtures
    D6933-08 Test Method for Oversized Particles in Emulsified Asphalts (Sieve Test)
    D6934-08 Test Method for Residue by Evaporation of Emulsified Asphalt
    D6935-04 Test Method for Determining Cement Mixing of Emulsified Asphalt
    D6936-09 Test Method for Determining Demulsibility of Emulsified Asphalt
    D6937-08 Test Method for Determining Density of Emulsified Asphalt
    D6951_D6951M-09 Test Method for Use of the Dynamic Cone Penetrometer in Shallow Pavement Applications
    D6995-05 Test Method for Determining Field VMA based on the Maximum Specific Gravity of the Mix (Gmm)
    D6997-04 Test Method for Distillation of Emulsified Asphalt
    D6998-04 Practice for Evaluating Aggregate Coating using Emulsified Asphalts
    D6999-04 Practice for Miscibility of Emulsified Asphalts
    D7000-08 Test Method for Sweep Test of Bituminous Emulsion Surface Treatment Samples
    D7063-05 Test Method for Effective Porosity and Effective Air Voids of Compacted Bituminous Paving Mixture Samples
    D7064_D7064M-08 Practice for Open-Graded Friction Course (OGFC) Mix Design
    D7113-09 Test Method for Density of Bituminous Paving Mixtures in Place by the Electromagnetic Surface Contact Methods
    D7115-08 Test Method for Measurement of Superpave Gyratory Compactor (SGC) Internal Angle of Gyration Using Simulated Loading
    D7116-05 Specification for Joint Sealants, Hot Applied, Jet Fuel Resistant Types, for Portland Cement Concrete Pavements
    D7172-06E01 Test Method for Determining The Relative Density (Specific Gravity) And Absorption Of Fine Aggregates Using Infrared
    D7173-05 Practice for Determining the Separation Tendency of Polymer from Polymer Modified Asphalt
    D7174-05 Specification for Preformed Closed-Cell Polyolefin Expansion Joint Fillers for Concrete Paving and Structural Construction
    D7175-08 Test Method for Determining the Rheological Properties of Asphalt Binder Using a Dynamic Shear Rheometer
    D7196-06 Test Method for Raveling Test of Cold Mixed Bituminous Emulsion Samples
    D7226-06 Test Method for Determining the Viscosity of Emulsified Asphalts Using a Rotational Paddle Viscometer
    D7227-06 Practice for Rapid Drying of Compacted Asphalt Specimens Using Vacuum Drying Apparatus
    D7228-06A Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
    D7229-08 Test Method for Preparation and Determination of Bulk Specific Gravity of Dense-Graded Cold Mix Asphalt (CMA) Specimens by Means of Superpave Gyratory Compactor
    D7312-07 Test Method for Determining the Permanent Shear Strain and Complex Shear Modulus of Asphalt Mixtures Using the Superpave Shear Tester (SST)
    D7313-07A Test Method for Determining Fracture Energy of Asphalt-Aggregate Mixtures Using the Disk-Shaped Compact Tension Geometry
    D7369-09 Test Method for Determining the Resilient Modulus of Bituminous Mixtures by Indirect Tension Test
    D7370-09 Test Method for Determination of Relative Density and Absorption of Fine, Coarse and Blended Aggregate Using Combined Vacuum Saturation and Rapid Submersion
    D7402-09 Practice for Identifying Cationic Emulsified Asphalts
    D7403-09 Test Method for Determination of Residue of Emulsified Asphalt by Low Temperature Vacuum Distillation
    D7404-07 Test Method for Determination of Emulsified Asphalt Residue by Moisture Analyzer
    D7405-10 Test Method for Multiple Stress Creep and Recovery (MSCR) of Asphalt Binder Using a Dynamic Shear Rheometer
    D7428-08E01 Test Method for Resistance of Fine Aggregate to Degradation by Abrasion in the Micro-Deval Apparatus
    D7460-08 Test Method for Determining Fatigue Failure of Compacted Asphalt Concrete Subjected to Repeated Flexural Bending
    D7496-09 Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
    D7497-09 Practice for Recovering Residue from Emulsified Asphalt Using Low Temperature Evaporative Technique
    D7552-09 Test Method for Determining the Complex Shear Modulus (G*) Of Bituminous Mixtures Using Dynamic Shear Rheometer
    D7553-09 Test Method for Solubility of Asphalt Materials in N-Propyl Bromide
    D7564_D7564M-09 Practice for Construction of Asphalt-Rubber Cape Seal
    E0274-06 Test Method for Skid Resistance of Paved Surfaces Using a Full-Scale Tire
    E0303-93R08 Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
    E0445_E0445M-88R08 Test Method for Stopping Distance on Paved Surfaces Using a Passenger Vehicle Equipped With Full-Scale Tires
    E0501-08 Specification for Standard Rib Tire for Pavement Skid-Resistance Tests
    E0503_E0503M-88R04 Test Methods for Measurement of Skid Resistance on Paved Surfaces Using a Passenger Vehicle Diagonal Braking Technique
    E0524-08 Specification for Standard Smooth Tire for Pavement Skid-Resistance Tests
    E0556-95R06 Test Method for Calibrating a Wheel Force or Torque Transducer Using a Calibration Platform (User Level)
    E0660-90R07 Practice for Accelerated Polishing of Aggregates or Pavement Surfaces Using a Small-Wheel, Circular Track Polishing Machine
    E0670-09 Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
    E0867-06 Terminology Relating to Vehicle-Pavement Systems
    E0950_E0950M-09 Test Method for Measuring the Longitudinal Profile of Traveled Surfaces with an Accelerometer Established Inertial Profiling Reference
    E0965-96R06 Test Method for Measuring Pavement Macrotexture Depth Using a Volumetric Technique
    E1082-90R07 Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
    E1166-00R09 Guide for Network Level Pavement Management
    E1170-97R07 Practices for Simulating Vehicular Response to Longitudinal Profiles of Traveled Surfaces
    E1215-93R07 Specification for Trailers Used for Measuring Vehicular Response to Road Roughness
    E1274-03R08 Test Method for Measuring Pavement Roughness Using a Profilograph
    E1318-09 Specification for Highway Weigh-In-Motion (WIM) Systems with User Requirements and Test Methods
    E1337-90R08 Test Method for Determining Longitudinal Peak Braking Coefficient of Paved Surfaces Using Standard Reference Test Tire
    E1364-95R05 Test Method for Measuring Road Roughness by Static Level Method
    E1448_E1448M-09 Practice for Calibration of Systems Used for Measuring Vehicular Response to Pavement Roughness
    E1489-08 Practice for Computing Ride Number of Roads from Longitudinal Profile Measurements Made by an Inertial Profile Measuring Device
    E1551-08 Specification for Special Purpose, Smooth\NTread Tire, Operated on Fixed Braking Slip Continuous Friction Measuring Equipment
    E1656-06 Guide for Classification of Automated Pavement Condition Survey Equipment
    E1703_E1703M-95R05 Test Method for Measuring Rut-Depth of Pavement Surfaces Using a Straightedge
    E1777-09 Guide for Prioritization of Data Needs for Pavement Management
    E1778-98AR08 Terminology Relating to Pavement Distress
    E1844-08 Specification for A Size 10 |m~ 4\N5 Smooth-Tread Friction Test Tire
    E1845-09 Practice for Calculating Pavement Macrotexture Mean Profile Depth
    E1859-97R06 Test Method for Friction Coefficient Measurements Between Tire and Pavement Using a Variable Slip Technique
    E1889-97R09 Guide for Pavement Management Implementation
    E1890-01R06 Guide for Validating New Area Reference Skid Measurement Systems and Equipment
    E1911-09AE01 Test Method for Measuring Paved Surface Frictional Properties Using the Dynamic Friction Tester
    E1926-08 Practice for Computing International Roughness Index of Roads from Longitudinal Profile Measurements
    E1927-98R07 Guide for Conducting Subjective Pavement Ride Quality Ratings
    E1957-04 Practice for Installing and Using Pneumatic Tubes with Roadway Traffic Counters and Classifiers
    E1960-07 Practice for Calculating International Friction Index of a Pavement Surface
    E2034-99R07 Practices for Simulating Truck Response to Longitudinal Profiles of Vehicular Traveled Surfaces
    E2100-04 Practice for Calculating the International Runway Friction Index
    E2101-00R05 Test Method for Measuring the Frictional Properties of Winter Contaminated Pavement Surfaces Using an Averaging-Type Spot Measuring Decelerometer
    E2133-03R09 Test Method for Using a Rolling Inclinometer to Measure Longitudinal and Transverse Profiles of a Traveled Surface
    E2157-09 Test Method for Measuring Pavement Macrotexture Properties Using the Circular Track Meter
    E2213-03 Specification for Telecommunications and Information Exchange Between Roadside and Vehicle Systems \M 5 GHz Band Dedicated Short Range Communications (DSRC) Medium Access Control (MAC) and Physical Layer (PHY) Specifications
    E2259-03A Guide for Archiving and Retrieving Intelligent Transportation Systems-Generated Data
    E2300-09 Specification for Highway Traffic Monitoring Devices
    E2340-06 Test Method for Measuring the Skid Resistance of Pavements and Other Trafficked Surfaces Using a Continuous Reading, Fixed-Slip Technique
    E2341_E2341M-05R09 Test Method for Determining the Stopping Distance Number by Initial Speed and Stopping Distance at Traffic Incident Sites
    E2380_E2380M-09 Test Method for Measuring Pavement Texture Drainage Using an Outflow Meter
    E2415-05 Practice for Installing Piezoelectric Highway Traffic Sensors
    E2467-05 Practice for Developing Axle Count Adjustment Factors
    E2468-05 Practice for Metadata to Support Archived Data Management Systems
    E2532-09 Test Methods for Evaluating Performance of Highway Traffic Monitoring Devices
    E2560-07 Specification for Data Format for Pavement Profile
    E2561-07A Practice for the Installation of Inductive Loop Detectors
    E2583-07 Test Method for Measuring Deflections with a Light Weight Deflectometer (LWD)
    E2665-08 Specification for Archiving ITS-Generated Traffic Monitoring Data
    E2666-09 Practice for Correlations of Mu Values of Continuous Friction Measurement Equipment to Determine Maintenance Levels for Use at Airports
    E2667-09 Practice for Acquiring Intersection Turning Movement Traffic Data

    More Information


    Print, CD-ROM or NOW get Online Access to this Volume
    (Basic or Plus)

    View Contents

    - 2010
       Standards: 274
       Pages: 1706

    - 2009
       Standards: 267
       Pages: 1562