ASTM Volume 15.03, October 2009
Space Simulation; Aerospace and Aircraft; Composite Materials
Return to Previous Page
Table of Contents
C0271_C0271M-05 Test Method for Density of Sandwich Core Materials
C0272-01R07 Test Method for Water Absorption of Core Materials for Structural Sandwich Constructions
C0273_C0273M-07A Test Method for Shear Properties of Sandwich Core Materials
C0274-07 Terminology of Structural Sandwich Constructions
C0297_C0297M-04 Test Method for Flatwise Tensile Strength of Sandwich Constructions
C0363_C0363M-09 Test Method for Node Tensile Strength of Honeycomb Core Materials
C0364_C0364M-07 Test Method for Edgewise Compressive Strength of Sandwich Constructions
C0365_C0365M-05 Test Method for Flatwise Compressive Properties of Sandwich Cores
C0366_C0366M-05 Test Methods for Measurement of Thickness of Sandwich Cores
C0393_C0393M-06 Test Method for Core Shear Properties of Sandwich Constructions by Beam Flexure
C0394-00R08 Test Method for Shear Fatigue of Sandwich Core Materials
C0480_C0480M-08 Test Method for Flexure Creep of Sandwich Constructions
C0481-99R05 Test Method for Laboratory Aging of Sandwich Constructions
C0613_C0613M-97R08 Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction
D2344_D2344M-00R06 Test Method for Short-Beam Strength of Polymer Matrix Composite Materials and Their Laminates
D3039_D3039M-08 Test Method for Tensile Properties of Polymer Matrix Composite Materials
D3171-09 Test Methods for Constituent Content of Composite Materials
D3410_D3410M-03R08 Test Method for Compressive Properties of Polymer Matrix Composite Materials with Unsupported Gage Section by Shear Loading
D3479_D3479M-96R07 Test Method for Tension-Tension Fatigue of Polymer Matrix Composite Materials
D3518_D3518M-94R07 Test Method for In-Plane Shear Response of Polymer Matrix Composite Materials by Tensile Test of a |m@45|SD Laminate
D3529_D3529M-97R08 Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg
D3530_D3530M-97R08 Test Method for Volatiles Content of Composite Material Prepreg
D3531-99R04 Test Method for Resin Flow of Carbon Fiber-Epoxy Prepreg
D3532-99R04 Test Method for Gel Time of Carbon Fiber-Epoxy Prepreg
D3552-96R07 Test Method for Tensile Properties of Fiber Reinforced Metal Matrix Composites
D3800-99R04 Test Method for Density of High-Modulus Fibers
D3878-07 Terminology for Composite Materials
D4018-99R08 Test Methods for Properties of Continuous Filament Carbon and Graphite Fiber Tows
D4102-82R08 Test Method for Thermal Oxidative Resistance of Carbon Fibers
D4255_D4255M-01R07 Test Method for In-Plane Shear Properties of Polymer Matrix Composite Materials by the Rail Shear Method
D4762-08 Guide for Testing Polymer Matrix Composite Materials
D5229_D5229M-92R04 Test Method for Moisture Absorption Properties and Equilibrium Conditioning of Polymer Matrix Composite Materials
D5379_D5379M-05 Test Method for Shear Properties of Composite Materials by the V-Notched Beam Method
D5448_D5448M-93R06 Test Method for Inplane Shear Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5449_D5449M-93R06 Test Method for Transverse Compressive Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5450_D5450M-93R06 Test Method for Transverse Tensile Properties of Hoop Wound Polymer Matrix Composite Cylinders
D5467_D5467M-97R04 Test Method for Compressive Properties of Unidirectional Polymer Matrix Composite Materials Using a Sandwich Beam
D5528-01R07E03 Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D5687_D5687M-95R07 Guide for Preparation of Flat Composite Panels with Processing Guidelines for Specimen Preparation
D5766_D5766M-07 Test Method for Open-Hole Tensile Strength of Polymer Matrix Composite Laminates
D5961_D5961M-08 Test Method for Bearing Response of Polymer Matrix Composite Laminates
D6115-97R04 Test Method for Mode I Fatigue Delamination Growth Onset of Unidirectional Fiber-Reinforced Polymer Matrix Composites
D6264_D6264M-07 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer-Matrix Composite to a Concentrated Quasi-Static Indentation Force
D6415_D6415M-06AE01 Test Method for Measuring the Curved Beam Strength of a Fiber-Reinforced Polymer-Matrix Composite
D6416_D6416M-01R07 Test Method for Two-Dimensional Flexural Properties of Simply Supported Sandwich Composite Plates Subjected to a Distributed Load
D6484_D6484M-04E01 Test Method for Open-Hole Compressive Strength of Polymer Matrix Composite Laminates
D6507-00R05 Practice for Fiber Reinforcement Orientation Codes for Composite Materials
D6641_D6641M-09 Test Method for Compressive Properties of Polymer Matrix Composite Materials Using a Combined Loading Compression (CLC) Test Fixture
D6671_D6671M-06 Test Method for Mixed Mode I-Mode II Interlaminar Fracture Toughness of Unidirectional Fiber Reinforced Polymer Matrix Composites
D6742_D6742M-07 Practice for Filled-Hole Tension and Compression Testing of Polymer Matrix Composite Laminates
D6772-02R07 Test Method for Dimensional Stability of Sandwich Core Materials
D6790-02R07 Test Method for Determining Poisson's Ratio of Honeycomb Cores
D6856-03R08 Guide for Testing Fabric-Reinforced |P`Textile|P' Composite Materials
D6873_D6873M-08 Practice for Bearing Fatigue Response of Polymer Matrix Composite Laminates
D7028-07E01 Test Method for Glass Transition Temperature (DMA Tg) of Polymer Matrix Composites by Dynamic Mechanical Analysis (DMA)
D7078_D7078M-05 Test Method for Shear Properties of Composite Materials by V-Notched Rail Shear Method
D7136_D7136M-07 Test Method for Measuring the Damage Resistance of a Fiber-Reinforced Polymer Matrix Composite to a Drop-Weight Impact Event
D7137_D7137M-07 Test Method for Compressive Residual Strength Properties of Damaged Polymer Matrix Composite Plates
D7205_D7205M-06 Test Method for Tensile Properties of Fiber Reinforced Polymer Matrix Composite Bars
D7248_D7248M-08 Test Method for Bearing/Bypass Interaction Response of Polymer Matrix Composite Laminates Using 2-Fastener Specimens
D7249_D7249M-06 Test Method for Facing Properties of Sandwich Constructions by Long Beam Flexure
D7250_D7250M-06 Practice for Determining Sandwich Beam Flexural and Shear Stiffness
D7264_D7264M-07 Test Method for Flexural Properties of Polymer Matrix Composite Materials
D7290-06 Practice for Evaluating Material Property Characteristic Values for Polymeric Composites for Civil Engineering Structural Applications
D7291_D7291M-07 Test Method for Through-Thickness |P`Flatwise|P' Tensile Strength and Elastic Modulus of a Fiber-Reinforced Polymer Matrix Composite Material
D7332_D7332M-07E01 Test Method for Measuring the Fastener Pull-Through Resistance of a Fiber-Reinforced Polymer Matrix Composite
D7336_D7336M-07 Test Method for Static Energy Absorption Properties of Honeycomb Sandwich Core Materials
D7337_D7337M-07 Test Method for Tensile Creep Rupture of Fiber Reinforced Polymer Matrix Composite Bars
D7522_D7522M-09 Test Method for Pull-Off Strength for FRP Bonded to Concrete Substrate
E0285-08 Test Method for Oxyacetylene Ablation Testing of Thermal Insulation Materials
E0295-82R06 Test Method for Measured Speed of Oil Diffusion Pumps
E0296-70R04 Practice for Ionization Gage Application to Space Simulators
E0307-72R08 Test Method for Normal Spectral Emittance at Elevated Temperatures
E0341-08 Practice for Measuring Plasma Arc Gas Enthalpy by Energy Balance
E0349-06 Terminology Relating to Space Simulation
E0377-08 Practice for Internal Temperature Measurements in Low-Conductivity Materials
E0408-71R08 Test Methods for Total Normal Emittance of Surfaces Using Inspection-Meter Techniques
E0422-05 Test Method for Measuring Heat Flux Using a Water-Cooled Calorimeter
E0423-71R08 Test Method for Normal Spectral Emittance at Elevated Temperatures of Nonconducting Specimens
E0434-71R02 Test Method for Calorimetric Determination of Hemispherical Emittance and the Ratio of Solar Absorptance to Hemispherical Emittance Using Solar Simulation
E0457-08 Test Method for Measuring Heat-Transfer Rate Using a Thermal Capacitance (Slug) Calorimeter
E0458-08 Test Method for Heat of Ablation
E0459-05 Test Method for Measuring Heat Transfer Rate Using a Thin-Skin Calorimeter
E0471-96R02 Test Method for Obtaining Char Density Profile of Ablative Materials by Machining and Weighing
E0490-00AR06 Solar Constant and Zero Air Mass Solar Spectral Irradiance Tables
E0491-73R04E01 Practice for Solar Simulation for Thermal Balance Testing of Spacecraft
E0511-07 Test Method for Measuring Heat Flux Using a Copper-Constantan Circular Foil, Heat-Flux Transducer
E0512-94R04 Practice for Combined, Simulated Space Environment Testing of Thermal Control Materials with Electromagnetic and Particulate Radiation
E0595-07 Test Method for Total Mass Loss and Collected Volatile Condensable Materials from Outgassing in a Vacuum Environment
E0598-08 Test Method for Measuring Extreme Heat-Transfer Rates from High-Energy Environments Using a Transient, Null-Point Calorimeter
E0637-05 Test Method for Calculation of Stagnation Enthalpy from Heat Transfer Theory and Experimental Measurements of Stagnation-Point Heat Transfer and Pressure
E0639-78R02 Test Method for Measuring Total-Radiance Temperature of Heated Surfaces Using a Radiation Pyrometer
E0834-04 Practice for Determining Vacuum Chamber Gaseous Environment Using a Cold Finger
E1216-06 Practice for Sampling for Particulate Contamination by Tape Lift
E1234-07 Practice for Handling, Transporting, and Installing Nonvolatile Residue (NVR) Sample Plates Used in Environmentally Controlled Areas for Spacecraft
E1235-08 Test Method for Gravimetric Determination of Nonvolatile Residue (NVR) in Environmentally Controlled Areas for Spacecraft
E1309-00R05 Guide for Identification of Fiber-Reinforced Polymer-Matrix Composite Materials in Databases
E1434-00R06 Guide for Recording Mechanical Test Data of Fiber-Reinforced Composite Materials in Databases
E1471-92R08 Guide for Identification of Fibers, Fillers, and Core Materials in Computerized Material Property Databases
E1548-09 Practice for Preparation of Aerospace Contamination Control Plans
E1549-06 Specification for ESD Controlled Garments Required in Cleanrooms and Controlled Environments for Spacecraft for Non-Hazardous and Hazardous Operations
E1559-09 Test Method for Contamination Outgassing Characteristics of Spacecraft Materials
E1560-06 Test Method for Gravimetric Determination of Nonvolatile Residue From Cleanroom Wipers
E1731-06 Test Method for Gravimetric Determination of Nonvolatile Residue from Cleanroom Gloves
E1997-07 Practice for the Selection of Spacecraft Materials
E2042_E2042M-09 Practice for Cleaning and Maintaining Controlled Areas and Clean Rooms
E2088-06 Practice for Selecting, Preparing, Exposing, and Analyzing Witness Surfaces for Measuring Particle Deposition in Cleanrooms and Associated Controlled Environments
E2089-00R06 Practices for Ground Laboratory Atomic Oxygen Interaction Evaluation of Materials for Space Applications
E2090-06 Test Method for Size-Differentiated Counting of Particles and Fibers Released from Cleanroom Wipers Using Optical and Scanning Electron Microscopy
E2217-02R07 Practice for Design and Construction of Aerospace Cleanrooms and Contamination Controlled Areas
E2311-04 Practice for QCM Measurement of Spacecraft Molecular Contamination in Space
E2312-04 Practice for Tests of Cleanroom Materials
E2352-04 Practice for Aerospace Cleanrooms and Associated Controlled Environments\MCleanroom Operations
E2683-09 Test Method for Measuring Heat Flux Using Flush-Mounted Insert Temperature-Gradient Gages
E2684-09 Test Method for Measuring Heat Flux Using Surface-Mounted One-Dimensional Flat Gages
F0021-65R07 Test Method for Hydrophobic Surface Films by the Atomizer Test
F0022-02R07 Test Method for Hydrophobic Surface Films by the Water-Break Test
F0024-09 Test Method for Measuring and Counting Particulate Contamination on Surfaces
F0025_F0025M-09 Test Method for Sizing and Counting Airborne Particulate Contamination in Cleanrooms and Other Dust-Controlled Areas
F0050-07 Practice for Continuous Sizing and Counting of Airborne Particles in Dust-Controlled Areas and Clean Rooms Using Instruments Capable of Detecting Single Sub-Micrometre and Larger Particles
F0051-00R07 Test Method for Sizing and Counting Particulate Contaminant In and On Clean Room Garments
F0091-06 Practice for Testing for Leaks in the Filters Associated With Laminar Flow Clean Rooms and Clean Work Stations by Use of a Condensation Nuclei Detector
F0302-04 Practice for Field Sampling of Aerospace Fluids in Containers
F0303-08 Practices for Sampling for Particles in Aerospace Fluids and Components
F0307-02R07 Practice for Sampling Pressurized Gas for Gas Analysis
F0309-04 Practice for Liquid Sampling of Noncryogenic Aerospace Propellants
F0310-07 Practice for Sampling Cryogenic Aerospace Fluids
F0311-08 Practice for Processing Aerospace Liquid Samples for Particulate Contamination Analysis Using Membrane Filters
F0312-08 Test Methods for Microscopical Sizing and Counting Particles from Aerospace Fluids on Membrane Filters
F0318-06 Practice for Sampling Airborne Particulate Contamination in Cleanrooms for Handling Aerospace Fluids
F0319-09 Practice for Polarized Light Detection of Flaws in Aerospace Transparency Heating Elements
F0320-05 Test Method for Hail Impact Resistance of Aerospace Transparent Enclosures
F0326-96R06 Test Method for Electronic Measurement for Hydrogen Embrittlement From Cadmium-Electroplating Processes
F0327-08 Practice for Sampling Gas Blow Down Systems and Components for Particulate Contamination by Automatic Particle Monitor Method
F0330-89R04 Test Method for Bird Impact Testing of Aerospace Transparent Enclosures
F0331-05 Test Method for Nonvolatile Residue of Solvent Extract from Aerospace Components (Using Flash Evaporator)
F0428-09 Test Method for Intensity of Scratches on Aerospace Glass Enclosures
F0482-09 Practice for Corrosion of Aircraft Metals by Total Immersion in Maintenance Chemicals
F0483-09 Practice for Total Immersion Corrosion Test for Aircraft Maintenance Chemicals
F0484-08 Test Method for Stress Crazing of Acrylic Plastics in Contact with Liquid or Semi-Liquid Compounds
F0485-08 Practice for Effects of Cleaners on Unpainted Aircraft Surfaces
F0502-08 Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces
F0519-08 Test Method for Mechanical Hydrogen Embrittlement Evaluation of Plating/Coating Processes and Service Environments
F0520-97R04 Test Method for Environmental Resistance of Aerospace Transparencies
F0521-83R04 Test Methods for Bond Integrity of Transparent Laminates
F0548-09 Test Method for Intensity of Scratches on Aerospace Transparent Plastics
F0733-09 Practice for Optical Distortion and Deviation of Transparent Parts Using the Double-Exposure Method
F0734-95R06 Test Method for Shear Strength of Fusion Bonded Polycarbonate Aerospace Glazing Material
F0735-06 Test Method for Abrasion Resistance of Transparent Plastics and Coatings Using the Oscillating Sand Method
F0736-95R06 Test Method for Impact Resistance of Monolithic Polycarbonate Sheet by Means of a Falling Weight
F0790-08 Guide for Testing Materials for Aerospace Plastic Transparent Enclosures
F0791-96R08 Test Method for Stress Crazing of Transparent Plastics
F0801-96R08 Test Method for Measuring Optical Angular Deviation of Transparent Parts
F0862-93R02 Test Method for pH and Chloride-ion Concentration of Aerospace Hydraulic Fluids
F0942-02R08 Guide for Selection of Test Methods for Interlayer Materials for Aerospace Transparent Enclosures
F0945-06 Test Method for Stress-Corrosion of Titanium Alloys by Aircraft Engine Cleaning Materials
F1080-93R08 Test Method for Determining the Consistency of Viscous Liquids Using a Consistometer
F1104-02R08 Test Method for Preparing Aircraft Cleaning Compounds, Liquid Type, Water Base, for Storage Stability Testing
F1105-09 Practice for Preparing Aircraft Cleaning Compounds, Liquid-Type, Temperature-Sensitive, or Solvent-Based, for Storage Stability Testing
F1110-09 Test Method for Sandwich Corrosion Test
F1111-08B Test Method for Corrosion of Low-Embrittling Cadmium Plate by Aircraft Maintenance Chemicals
F1113-87R05E01 Test Method for Electrochemical Measurement of Diffusible Hydrogen in Steels (Barnacle Electrode)
F1164-97R09E01 Test Method for Evaluation of Transparent Plastics Exposed to Accelerated Weathering Combined with Biaxial Stress
F1165-98R04 Test Method for Measuring Angular Displacement of Multiple Images in Transparent Parts
F1181-09 Test Method for Measuring Binocular Disparity in Transparent Parts
F1252-08 Test Method for Measuring Optical Reflectivity of Transparent Materials
F1316-90R08 Test Method for Measuring the Transmissivity of Transparent Parts
F1362-09 Test Method for Shear Strength and Shear Modulus of Aerospace Glazing Interlayer Materials
F1459-06 Test Method for Determination of the Susceptibility of Metallic Materials to Hydrogen Gas Embrittlement (HGE)
F1624-06 Test Method for Measurement of Hydrogen Embrittlement Threshold in Steel by the Incremental Step Loading Technique
F1645_F1645M-07 Test Method for Water Migration in Honeycomb Core Materials
F1863-98R04 Test Method for Measuring the Night Vision Goggle-Weighted Transmissivity of Transparent Parts
F1864-05 Test Method for Dust Erosion Resistance of Optical and Infrared Transparent Materials and Coatings
F2078-08A Terminology Relating to Hydrogen Embrittlement Testing
F2108-06 Practice for Inspection of Transparent Parts by Prism
F2109-01R05 Test Method to Determine Color Change and Staining Caused by Aircraft Maintenance Chemicals upon Aircraft Cabin Interior Hard Surfaces
F2111-01AR05E01 Practice for Measuring Intergranular Attack or End Grain Pitting on Metals Caused by Aircraft Chemical Processes
F2156-06 Test Method for Measuring Optical Distortion in Transparent Parts Using Grid Line Slope
F2429-05 Terminology Relating to Aerospace Transparent Materials and Enclosures
F2469-05 Test Method for Measuring Optical Angular Deviation of Transparent Parts Using the Double-Exposure Method