ASTM Volume 14.03, July 2009
Temperature Measurement
Return to Previous Page
Table of Contents
E0001-07 Specification for ASTM Liquid-in-Glass Thermometers
E0077-07 Test Method for Inspection and Verification of Thermometers
E0100-05 Specification for ASTM Hydrometers
E0126-05A Test Method for Inspection, Calibration, and Verification of ASTM Hydrometers
E0207-08 Test Method for Thermal EMF Test of Single Thermoelement Materials by Comparison with a Reference Thermoelement of Similar EMF-Temperature Properties
E0220-07A Test Method for Calibration of Thermocouples By Comparison Techniques
E0230-03 Specification and Temperature-Electromotive Force (EMF) Tables for Standardized Thermocouples
E0235-06 Specification for Thermocouples, Sheathed, Type K and Type N, for Nuclear or for Other High-Reliability Applications
E0344-08 Terminology Relating to Thermometry and Hydrometry
E0452-02R07 Test Method for Calibration of Refractory Metal Thermocouples Using a Radiation Thermometer
E0563-08 Practice for Preparation and Use of an Ice-Point Bath as a Reference Temperature
E0574-06 Specification for Duplex, Base Metal Thermocouple Wire With Glass Fiber or Silica Fiber Insulation
E0585_E0585M-04 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Base Metal Thermocouple Cable
E0601-07A Test Method for Measuring Electromotive Force (emf) Stability of Base-Metal Thermoelement Materials with Time in Air
E0608_E0608M-06 Specification for Mineral-Insulated, Metal-Sheathed Base Metal Thermocouples
E0644-08 Test Methods for Testing Industrial Resistance Thermometers
E0667-98R03 Specification for Mercury-in-Glass, Maximum Self-Registering Clinical Thermometers
E0696-07 Specification for Tungsten-Rhenium Alloy Thermocouple Wire
E0780-06 Test Method for Measuring the Insulation Resistance of Mineral-Insulated, Metal-Sheathed Thermocouples and Thermocouple Cable at Room Temperature
E0825-98R03 Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
E0839-05 Test Methods for Sheathed Thermocouples and Sheathed Thermocouple Material
E0879-01R07 Specification for Thermistor Sensors for Clinical Laboratory Temperature Measurements
E0988-96R02 Temperature-Electromotive Force (EMF) Tables for Tungsten-Rhenium Thermocouples
E1061-01R07 Specification for Direct-Reading Liquid Crystal Forehead Thermometers
E1104-98R03 Specification for Clinical Thermometer Probe Covers and Sheaths
E1112-00R06 Specification for Electronic Thermometer for Intermittent Determination of Patient Temperature
E1129_E1129M-08 Specification for Thermocouple Connectors
E1137_E1137M-08 Specification for Industrial Platinum Resistance Thermometers
E1159-98R03 Specification for Thermocouple Materials, Platinum-Rhodium Alloys, and Platinum
E1256-95R07 Test Methods for Radiation Thermometers (Single Waveband Type)
E1299-96R02 Specification for Reusable Phase-Change-Type Fever Thermometer for Intermittent Determination of Human Temperature
E1350-07 Guide for Testing Sheathed Thermocouples, Thermocouples Assemblies, and Connecting Wires Prior to, and After Installation or Service
E1502-98R03E01 Guide for Use of Freezing-Point Cells for Reference Temperatures
E1594-06 Guide for Expression of Temperature
E1652-03 Specification for Magnesium Oxide and Aluminum Oxide Powder and Crushable Insulators Used in the Manufacture of Metal-Sheathed Platinum Resistance Thermometers, Base Metal Thermocouples, and Noble Metal Thermocouples
E1684-05 Specification for Miniature Thermocouple Connectors
E1750-02 Guide for Use of Water Triple Point Cells
E1965-98R03 Specification for Infrared Thermometers for Intermittent Determination of Patient Temperature
E2181_E2181M-06E01 Specification for Compacted Mineral-Insulated, Metal-Sheathed, Noble Metal Thermocouples and Thermocouple Cable
E2251-07 Specification for Liquid-in-Glass ASTM Thermometers with Low-Hazard Precision Liquids
E2593-07E01 Guide for Accuracy Verification of Industrial Platinum Resistance Thermometers
E2623-08 Practice for Reporting Thermometer Calibrations