BOS Volume 04.11 Building Constructions (I): E 72

Standards / Annual Book of ASTM Standards

The 80+ volume Annual Book of ASTM Standards contains ASTM's 12,000+ standards and is available in print, CD-ROM and Online formats (learn more about format options). The volumes can be purchased individually, as a section (at a 25% discount) or as the complete 80+ volume set (at a 50% discount).

ASTM Volume 04.11, November 2009
Building Constructions (I): E 72 - E 1670
Return to Previous Page

Table of Contents

E0072-05 Test Methods of Conducting Strength Tests of Panels for Building Construction
E0073-83R07 Practice for Static Load Testing of Truss Assemblies
E0154-08A Test Methods for Water Vapor Retarders Used in Contact with Earth Under Concrete Slabs, on Walls, or as Ground Cover
E0196-06 Practice for Gravity Load Testing of Floors and Low Slope Roofs
E0241-08 Guide for Limiting Water-Induced Damage to Buildings
E0283-04 Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure Differences Across the Specimen
E0330-02 Test Method for Structural Performance of Exterior Windows, Doors, Skylights and Curtain Walls by Uniform Static Air Pressure Difference
E0331-00R09 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Uniform Static Air Pressure Difference
E0405-04 Test Methods for Wear Testing Rotary Operators for Windows
E0455-04 Test Method for Static Load Testing of Framed Floor or Roof Diaphragm Constructions for Buildings
E0488-96R03 Test Methods for Strength of Anchors in Concrete and Masonry Elements
E0529-04 Guide for Conducting Flexural Tests on Beams and Girders for Building Construction
E0546-08 Test Method for Frost/Dew Point of Sealed Insulating Glass Units
E0547-00R09 Test Method for Water Penetration of Exterior Windows, Skylights, Doors, and Curtain Walls by Cyclic Static Air Pressure Difference
E0564-06 Practice for Static Load Test for Shear Resistance of Framed Walls for Buildings
E0575-05 Practice for Reporting Data from Structural Tests of Building Constructions, Elements, Connections, and Assemblies
E0576-08 Test Method for Frost/Dew Point of Sealed Insulating Glass Units in the Vertical Position
E0577-85R02 Guide for Dimensional Coordination of Rectilinear Building Parts and Systems
E0605-93R06 Test Methods for Thickness and Density of Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E0631-06 Terminology of Building Constructions
E0661-03R09 Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
E0695-03R09 Test Method of Measuring Relative Resistance of Wall, Floor, and Roof Construction to Impact Loading
E0713-88R02 Guide for Selection of Scales for Metric Building Drawings
E0736-00R06 Test Method for Cohesion/Adhesion of Sprayed Fire-Resistive Materials Applied to Structural Members
E0741-00R06 Test Method for Determining Air Change in a Single Zone by Means of a Tracer Gas Dilution
E0754-80R06 Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
E0759-92R05 Test Method for Effect of Deflection on Sprayed Fire-Resistive Material Applied to Structural Members
E0760-92R05 Test Method for Effect of Impact on Bonding of Sprayed Fire-Resistive Material Applied to Structural Members
E0761-92R05 Test Method for Compressive Strength of Sprayed Fire-Resistive Material Applied to Structural Members
E0773-01 Test Method for Accelerated Weathering of Sealed Insulating Glass Units
E0779-03 Test Method for Determining Air Leakage Rate by Fan Pressurization
E0783-02 Test Method for Field Measurement of Air Leakage Through Installed Exterior Windows and Doors
E0833-09 Terminology of Building Economics
E0835_E0835M-93R02 Guide for Modular Coordination of Clay and Concrete Masonry Units
E0859-93R06 Test Method for Air Erosion of Sprayed Fire-Resistive Materials (SFRMs) Applied to Structural Members
E0864-08 Practice for Surface Preparation of Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E0865-08 Specification for Structural Film Adhesives for Honeycomb Sandwich Panels
E0866-05 Specification for Corrosion-Inhibiting Adhesive Primer for Aluminum Alloys to Be Adhesively Bonded in Honeycomb Shelter Panels
E0874-04 Practice for Adhesive Bonding of Aluminum Facings to Nonmetallic Honeycomb Core for Shelter Panels
E0894-88R04 Test Method for Anchorage of Permanent Metal Railing Systems and Rails for Buildings
E0917-05E01 Practice for Measuring Life-Cycle Costs of Buildings and Building Systems
E0935-00R06 Test Methods for Performance of Permanent Metal Railing Systems and Rails for Buildings
E0936-98R04 Practice for Roof System Assemblies Employing Steel Deck, Preformed Roof Insulation, and Bituminous Built-Up Roofing
E0937-93R05 Test Method for Corrosion of Steel by Sprayed Fire-Resistive Material (SFRM) Applied to Structural Members
E0964-06E01 Practice for Measuring Benefit-to-Cost and Savings-to-Investment Ratios for Buildings and Building Systems
E0985-00R06 Specification for Permanent Metal Railing Systems and Rails for Buildings
E0987-88R01 Test Methods for Deglazing Force of Fenestration Products
E0990-04 Specification for Core-Splice Adhesive for Honeycomb Sandwich Structural Panels
E0997-01 Test Method for Structural Performance of Glass in Exterior Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Destructive Methods
E0998-05 Test Method for Structural Performance of Glass in Windows, Curtain Walls, and Doors Under the Influence of Uniform Static Loads by Nondestructive Method
E1057-06E01 Practice for Measuring Internal Rate of Return and Adjusted Internal Rate of Return for Investments in Buildings and Building Systems
E1074-09 Practice for Measuring Net Benefits and Net Savings for Investments in Buildings and Building Systems
E1091-08 Specification for Nonmetallic Honeycomb Core for Use in Shelter Panels
E1105-00R08 Test Method for Field Determination of Water Penetration of Installed Exterior Windows, Skylights, Doors, and Curtain Walls, by Uniform or Cyclic Static Air Pressure Difference
E1121-07E01 Practice for Measuring Payback for Investments in Buildings and Building Systems
E1155-96R08 Test Method for Determining _F_L
E1155M-96R08 Test Method for Determining _F_L
E1185-07E01 Guide for Selecting Economic Methods for Evaluating Investments in Buildings and Building Systems
E1186-03R09 Practices for Air Leakage Site Detection in Building Envelopes and Air Barrier Systems
E1190-95R07 Test Methods for Strength of Power-Actuated Fasteners Installed in Structural Members
E1233-06 Test Method for Structural Performance of Exterior Windows, Doors, Skylights, and Curtain Walls by Cyclic Air Pressure Differential
E1258-88R08 Test Method for Airflow Calibration of Fan Pressurization Devices
E1300-09A Practice for Determining Load Resistance of Glass in Buildings
E1307-05 Practice for Surface Preparation and Structural Adhesive Bonding of Precured, Nonmetallic Composite Facings to Structural Core for Flat Shelter Panels
E1334-95R05 Practice for Rating the Serviceability of a Building or Building-Related Facility
E1368-05E01 Practice for Visual Inspection of Asbestos Abatement Projects
E1369-07E02 Guide for Selecting Techniques for Treating Uncertainty and Risk in the Economic Evaluation of Buildings and Building Systems
E1399-97R05 Test Method for Cyclic Movement and Measuring the Minimum and Maximum Joint Widths of Architectural Joint Systems
E1410-91R05 Practice for Specifying Data for Evaluation of Energy Used in Residential Buildings
E1423-06 Practice for Determining Steady State Thermal Transmittance of Fenestration Systems
E1424-91R08 Test Method for Determining the Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors Under Specified Pressure and Temperature Differences Across the Specimen
E1425-07 Practice for Determining the Acoustical Performance of Windows, Doors, Skylight, and Glazed Wall Systems
E1464-92R05 Guide for Developing Energy Monitoring Protocols for Commercial and Institutional Buildings or Facilities
E1465-08A Practice for Radon Control Options for the Design and Construction of New Low-Rise Residential Buildings
E1480-92R04 Terminology of Facility Management (Building-Related)
E1481-00AR08 Terminology of Railing Systems and Rails for Buildings
E1486-98R04 Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria
E1486M-98R04 Test Method for Determining Floor Tolerances Using Waviness, Wheel Path and Levelness Criteria (Metric)
E1494-92R02 Practice for Encapsulants for Spray- or Trowel-Applied Friable Asbestos-Containing Building Materials
E1509-04 Specification for Room Heaters, Pellet Fuel-Burning Type
E1512-01R07 Test Methods for Testing Bond Performance of Bonded Anchors
E1513-93R05E01 Practice for Application of Sprayed Fire-Resistive Materials (SFRMs)
E1514-98R03 Specification for Structural Standing Seam Steel Roof Panel Systems
E1554-07 Test Methods for Determining Air Leakage of Air Distribution Systems by Fan Pressurization
E1555-08 Specification for Structural Paste Adhesive for Sandwich Panel Repair
E1556-08 Specification for Epoxy Resin System for Composite Skin, Honeycomb Sandwich Panel Repair
E1557-09 Classification for Building Elements and Related Sitework\MUNIFORMAT II
E1592-05 Test Method for Structural Performance of Sheet Metal Roof and Siding Systems by Uniform Static Air Pressure Difference
E1602-03 Guide for Construction of Solid Fuel Burning Masonry Heaters
E1605-04 Terminology Relating to Lead in Buildings
E1612-94R05 Specification for Preformed Architectural Compression Seals for Buildings and Parking Structures
E1613-04 Test Method for Determination of Lead by Inductively Coupled Plasma Atomic Emission Spectrometry (ICP-AES), Flame Atomic Absorption Spectrometry (FAAS), or Graphite Furnace Atomic Absorption Spectrometry (GFAAS) Techniques
E1637-98R03 Specification for Structural Standing Seam Aluminum Roof Panel Systems
E1643-09 Practice for Selection, Design, Installation, and Inspection of Water Vapor Retarders Used in Contact with Earth or Granular Fill Under Concrete Slabs
E1644-04 Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
E1645-01R07 Practice for Preparation of Dried Paint Samples by Hotplate or Microwave Digestion for Subsequent Lead Analysis
E1646-95R03 Test Method for Water Penetration of Exterior Metal Roof Panel Systems by Uniform Static Air Pressure Difference
E1660-95AR05 Classification for Serviceability of an Office Facility for Support for Office Work
E1661-95AR05 Classification for Serviceability of an Office Facility for Meetings and Group Effectiveness
E1662-95AR05 Classification for Serviceability of an Office Facility for Sound and Visual Environment
E1663-03 Classification for Serviceability of an Office Facility for Typical Office Information Technology
E1664-95AR05 Classification for Serviceability of an Office Facility for Layout and Building Factors
E1665-95AR05 Classification for Serviceability of an Office Facility for Facility Protection
E1666-95AR05 Classification for Serviceability of an Office Facility for Work Outside Normal Hours or Conditions
E1667-95AR05 Classification for Serviceability of an Office Facility for Image to the Public and Occupants
E1668-95AR05 Classification for Serviceability of an Office Facility for Amenities to Attract and Retain Staff
E1669-95AR05 Classification for Serviceability of an Office Facility for Location, Access and Wayfinding
E1670-95AR05 Classification for Serviceability of an Office Facility for Management of Operations and Maintenance