ASTM Volume 04.07, November 2009
Building Seals and Sealants; Fire Standards; Dimension Stone
Return to Previous Page
Table of Contents
C0097_C0097M-09 Test Methods for Absorption and Bulk Specific Gravity of Dimension Stone
C0099_C0099M-09 Test Method for Modulus of Rupture of Dimension Stone
C0119-08 Terminology Relating to Dimension Stone
C0120_C0120M-09 Test Methods of Flexure Testing of Slate (Breaking Load, Modulus of Rupture, Modulus of Elasticity)
C0121_C0121M-09 Test Method for Water Absorption of Slate
C0170_C0170M-09 Test Method for Compressive Strength of Dimension Stone
C0217_C0217M-09 Test Method for Weather Resistance of Slate
C0241_C0241M-09 Test Method for Abrasion Resistance of Stone Subjected to Foot Traffic
C0406-06E01 Specification for Roofing Slate
C0503-08A Specification for Marble Dimension Stone
C0509-06 Specification for Elastomeric Cellular Preformed Gasket and Sealing Material
C0510-05A Test Method for Staining and Color Change of Single- or Multicomponent Joint Sealants
C0542-05 Specification for Lock-Strip Gaskets
C0568-08A Specification for Limestone Dimension Stone
C0603-04R08 Test Method for Extrusion Rate and Application Life of Elastomeric Sealants
C0615-03 Specification for Granite Dimension Stone
C0616-08 Specification for Quartz-Based Dimension Stone
C0629-08 Specification for Slate Dimension Stone
C0639-01R07 Test Method for Rheological (Flow) Properties of Elastomeric Sealants
C0661-06 Test Method for Indentation Hardness of Elastomeric-Type Sealants by Means of a Durometer
C0679-03R09E01 Test Method for Tack-Free Time of Elastomeric Sealants
C0681-03R09 Test Method for Volatility of Oil- and Resin-Based, Knife-Grade, Channel Glazing Compounds
C0711-03R09 Test Method for Low-Temperature Flexibility and Tenacity of One-Part, Elastomeric, Solvent-Release Type Sealants
C0712-03R09 Test Method for Bubbling of One-Part, Elastomeric, Solvent-Release Type Sealants
C0716-06 Specification for Installing Lock-Strip Gaskets and Infill Glazing Materials
C0717-09 Terminology of Building Seals and Sealants
C0719-93R05 Test Method for Adhesion and Cohesion of Elastomeric Joint Sealants Under Cyclic Movement (Hockman Cycle)
C0731-00R06 Test Method for Extrudability, After Package Aging, of Latex Sealants
C0732-06 Test Method for Aging Effects of Artificial Weathering on Latex Sealants
C0734-06 Test Method for Low-Temperature Flexibility of Latex Sealants After Artificial Weathering
C0736-00R06E01 Test Method for Extension-Recovery and Adhesion of Latex Sealants
C0765-97R07 Test Method for Low-Temperature Flexibility of Preformed Tape Sealants
C0771-03R09 Test Method for Weight Loss After Heat Aging of Preformed Tape Sealants
C0772-03R09 Test Method for Oil Migration or Plasticizer Bleed-Out of Preformed Tape Sealants
C0782-03R09 Test Method for Softness of Preformed Tape Sealants
C0792-04R08 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants
C0793-05 Test Method for Effects of Laboratory Accelerated Weathering on Elastomeric Joint Sealants
C0794-06 Test Method for Adhesion-in-Peel of Elastomeric Joint Sealants
C0834-05 Specification for Latex Sealants
C0864-05 Specification for Dense Elastomeric Compression Seal Gaskets, Setting Blocks, and Spacers
C0879-03R09 Test Methods for Release Papers Used with Preformed Tape Sealants
C0880_C0880M-09 Test Method for Flexural Strength of Dimension Stone
C0907-03R08 Test Method for Tensile Adhesive Strength of Preformed Tape Sealants by Disk Method
C0908-00R06 Test Method for Yield Strength of Preformed Tape Sealants
C0910-06 Test Method for Bond and Cohesion of One-Part Elastomeric Solvent Release-Type Sealants
C0919-08 Practice for Use of Sealants in Acoustical Applications
C0920-08 Specification for Elastomeric Joint Sealants
C0961-06 Test Method for Lap Shear Strength of Sealants
C0963-00R07 Specification for Packaging, Identification, Shipment, and Storage of Lock-Strip Gaskets
C0964-07 Guide for Lock-Strip Gasket Glazing
C0972-00R06 Test Method for Compression-Recovery of Tape Sealant
C1016-02R08 Test Method for Determination of Water Absorption of Sealant Backing (Joint Filler) Material
C1021-08 Practice for Laboratories Engaged in Testing of Building Sealants
C1083-06 Test Method for Water Absorption of Cellular Elastomeric Gaskets and Sealing Materials
C1087-00R06 Test Method for Determining Compatibility of Liquid-Applied Sealants with Accessories Used in Structural Glazing Systems
C1115-06 Specification for Dense Elastomeric Silicone Rubber Gaskets and Accessories
C1135-00R05 Test Method for Determining Tensile Adhesion Properties of Structural Sealants
C1166-06 Test Method for Flame Propagation of Dense and Cellular Elastomeric Gaskets and Accessories
C1183-04R08 Test Method for Extrusion Rate of Elastomeric Sealants
C1184-05 Specification for Structural Silicone Sealants
C1193-09 Guide for Use of Joint Sealants
C1201_C1201M-09 Test Method for Structural Performance of Exterior Dimension Stone Cladding Systems by Uniform Static Air Pressure Difference
C1216-03R08 Test Method for Adhesion and Cohesion of One-Part Elastomeric Solvent Release Sealants
C1241-00R09 Test Method for Volume Shrinkage of Latex Sealants During Cure
C1242-05 Guide for Selection, Design, and Installation of Dimension Stone Anchoring Systems
C1246-00R06 Test Method for Effects of Heat Aging on Weight Loss, Cracking, and Chalking of Elastomeric Sealants After Cure
C1247-09 Test Method for Durability of Sealants Exposed to Continuous Immersion in Liquids
C1248-08 Test Method for Staining of Porous Substrate by Joint Sealants
C1249-06A Guide for Secondary Seal for Sealed Insulating Glass Units for Structural Sealant Glazing Applications
C1253-93R09 Test Method for Determining the Outgassing Potential of Sealant Backing
C1257-06A Test Method for Accelerated Weathering of Solvent-Release-Type Sealants
C1265-94R05E01 Test Method for Determining the Tensile Properties of an Insulating Glass Edge Seal for Structural Glazing Applications
C1266-02R07 Test Method for Flow Characteristics of Preformed Tape Sealants
C1281-03R09 Specification for Preformed Tape Sealants for Glazing Applications
C1294-07 Test Method for Compatibility of Insulating Glass Edge Sealants with Liquid-Applied Glazing Materials
C1299-03 Guide for Use in Selection of Liquid-Applied Sealants
C1311-02 Specification for Solvent Release Sealants
C1330-02R07 Specification for Cylindrical Sealant Backing for Use with Cold Liquid-Applied Sealants
C1352_C1352M-09 Test Method for Flexural Modulus of Elasticity of Dimension Stone
C1353-08 Test Method Using the Taber Abraser for Abrasion Resistance of Dimension Stone Subjected to Foot Traffic
C1354_C1354M-09 Test Method for Strength of Individual Stone Anchorages in Dimension Stone
C1367-06 Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
C1369-07 Specification for Secondary Edge Sealants for Structurally Glazed Insulating Glass Units
C1375-00R09 Guide for Substrates Used in Testing Building Seals and Sealants
C1382-05 Test Method for Determining Tensile Adhesion Properties of Sealants When Used in Exterior Insulation and Finish Systems (EIFS) Joints
C1392-00R05 Guide for Evaluating Failure of Structural Sealant Glazing
C1394-03R08 Guide for In-Situ Structural Silicone Glazing Evaluation
C1401-09A Guide for Structural Sealant Glazing
C1442-06 Practice for Conducting Tests on Sealants Using Artificial Weathering Apparatus
C1472-06 Guide for Calculating Movement and Other Effects When Establishing Sealant Joint Width
C1481-00R06 Guide for Use of Joint Sealants with Exterior Insulation and Finish Systems (EIFS)
C1487-02R07 Guide for Remedying Structural Silicone Glazing
C1496-01 Guide for Assessment and Maintenance of Exterior Dimension Stone Masonry Walls and Facades
C1501-09 Test Method for Color Stability of Building Construction Sealants as Determined by Laboratory Accelerated Weathering Procedures
C1515-01 Guide for Cleaning of Exterior Dimension Stone, Vertical And Horizontal Surfaces, New or Existing
C1518-04R09 Specification for Precured Elastomeric Silicone Joint Sealants
C1519-04 Practice for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
C1520-02 Guide for Paintability of Latex Sealants
C1521-09 Practice for Evaluating Adhesion of Installed Weatherproofing Sealant Joints
C1523-04 Test Method for Determining Modulus, Tear and Adhesion Properties of Precured Elastomeric Joint Sealants
C1526-08 Specification for Serpentine Dimension Stone
C1527-09 Specification for Travertine Dimension Stone
C1528-08 Guide for Selection of Dimension Stone for Exterior Use
C1536-03 Test Method for Measuring the Yield for Aerosol Foam Sealants
C1564-04R09 Guide for Use of Silicone Sealants for Protective Glazing Systems
C1589-05 Practice for Outdoor Weathering of Construction Seals and Sealants
C1620-05 Specification for Aerosol Polyurethane and Aerosol Latex Foam Sealants
C1635-06 Test Method to Evaluate Adhesion/Cohesion Properties of a Sealant at Fixed Extension
C1642-07 Practice for Determining Air Leakage Rates of Aerosol Foam Sealants and Other Construction Joint Fill and Insulation Materials
C1643-08 Test Method to Measuring the Post Dispensing Volumetric Expansion of Aerosol Foam Sealants
C1681-09 Test Method for Evaluating the Tear Resistance of a Sealant Under Constant Strain
D2202-00R06 Test Method for Slump of Sealants
D2203-01R07 Test Method for Staining from Sealants
D2377-00R08 Test Method for Tack-Free Time of Caulking Compounds and Sealants
D2452-03R09 Test Method for Extrudability of Oil- and Resin-Base Caulking Compounds
D2453-03R09 Test Method for Shrinkage and Tenacity of Oil- and Resin-Base Caulking Compounds
D2859-06 Test Method for Ignition Characteristics of Finished Textile Floor Covering Materials
E0084-09B Test Method for Surface Burning Characteristics of Building Materials
E0108-07A Test Methods for Fire Tests of Roof Coverings
E0119-09 Test Methods for Fire Tests of Building Construction and Materials
E0136-09 Test Method for Behavior of Materials in a Vertical Tube Furnace at 750|SDC
E0162-08B Test Method for Surface Flammability of Materials Using a Radiant Heat Energy Source
E0176-08A Terminology of Fire Standards
E0535-05A Practice for Preparation of Fire-Test-Response Standards
E0603-07 Guide for Room Fire Experiments
E0648-09A Test Method for Critical Radiant Flux of Floor-Covering Systems Using a Radiant Heat Energy Source
E0662-09 Test Method for Specific Optical Density of Smoke Generated by Solid Materials
E0800-07 Guide for Measurement of Gases Present or Generated During Fires
E0814-09 Test Method for Fire Tests of Penetration Firestop Systems
E0906-07E01 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using a Thermopile Method
E0970-08A Test Method for Critical Radiant Flux of Exposed Attic Floor Insulation Using a Radiant Heat Energy Source
E1317-08B Test Method for Flammability of Marine Surface Finishes
E1321-09 Test Method for Determining Material Ignition and Flame Spread Properties
E1352-08A Test Method for Cigarette Ignition Resistance of Mock-Up Upholstered Furniture Assemblies
E1353-08A Test Methods for Cigarette Ignition Resistance of Components of Upholstered Furniture
E1354-09 Test Method for Heat and Visible Smoke Release Rates for Materials and Products Using an Oxygen Consumption Calorimeter
E1355-05A Guide for Evaluating the Predictive Capability of Deterministic Fire Models
E1472-07 Guide for Documenting Computer Software for Fire Models
E1474-07 Test Method for Determining the Heat Release Rate of Upholstered Furniture and Mattress Components or Composites Using a Bench Scale Oxygen Consumption Calorimeter
E1529-06 Test Methods for Determining Effects of Large Hydrocarbon Pool Fires on Structural Members and Assemblies
E1537-07 Test Method for Fire Testing of Upholstered Furniture
E1546-09A Guide for Development of Fire-Hazard-Assessment Standards
E1590-07 Test Method for Fire Testing of Mattresses
E1591-07 Guide for Obtaining Data for Deterministic Fire Models
E1623-04 Test Method for Determination of Fire and Thermal Parameters of Materials, Products, and Systems Using an Intermediate Scale Calorimeter (ICAL)
E1678-09 Test Method for Measuring Smoke Toxicity for Use in Fire Hazard Analysis
E1725-08 Test Methods for Fire Tests of Fire-Resistive Barrier Systems for Electrical System Components
E1740-07A Test Method for Determining the Heat Release Rate and Other Fire-Test-Response Characteristics of Wallcovering Composites Using a Cone Calorimeter
E1776-07 Guide for Development of Fire-Risk-Assessment Standards
E1822-09 Test Method for Fire Testing of Stacked Chairs
E1895-07 Guide for Determining Uses and Limitations of Deterministic Fire Models
E1966-07 Test Method for Fire-Resistive Joint Systems
E1995-08 Test Method for Measurement of Smoke Obscuration Using a Conical Radiant Source in a Single Closed Chamber, With the Test Specimen Oriented Horizontally
E2026-07 Guide for Seismic Risk Assessment of Buildings
E2032-09 Guide for Extension of Data From Fire Resistance Tests Conducted in Accordance with ASTM E 119
E2058-09 Test Methods for Measurement of Synthetic Polymer Material Flammability Using a Fire Propagation Apparatus (FPA)
E2061-09 Guide for Fire Hazard Assessment of Rail Transportation Vehicles
E2067-08 Practice for Full-Scale Oxygen Consumption Calorimetry Fire Tests
E2102-08 Test Method for Measurement of Mass Loss and Ignitability for Screening Purposes Using a Conical Radiant Heater
E2187-04 Test Method for Measuring the Ignition Strength of Cigarettes
E2203-02R08 Specification for Dense Thermoplastic Elastomers Used for Compression Seals, Gaskets, Setting Blocks, Spacers and Accessories
E2226-08 Practice for Application of Hose Stream
E2230-08 Practice for Thermal Qualification of Type B Packages for Radioactive Material
E2231-07A Practice for Specimen Preparation and Mounting of Pipe and Duct Insulation Materials to Assess Surface Burning Characteristics
E2257-08 Test Method for Room Fire Test of Wall and Ceiling Materials and Assemblies
E2280-09 Guide for Fire Hazard Assessment of the Effect of Upholstered Seating Furniture Within Patient Rooms of Health Care Facilities
E2307-04E01 Test Method for Determining Fire Resistance of Perimeter Fire Barriers Using Intermediate-Scale, Multi-story Test Apparatus
E2335-08 Guide for Laboratory Monitors
E2336-04R09 Test Methods for Fire Resistive Grease Duct Enclosure Systems
E2404-08 Practice for Specimen Preparation and Mounting of Textile, Paper or Vinyl Wall or Ceiling Coverings to Assess Surface Burning Characteristics
E2405-05 Test Method for Determination of Fire and Thermal Parameters of Materials Using an Intermediate Scale Test with Vertically Oriented Specimen
E2536-06 Guide for Assessment of Measurement Uncertainty in Fire Tests
E2573-07A Practice for Specimen Preparation and Mounting of Site-Fabricated Stretch Systems to Assess Surface Burning Characteristics
E2579-07 Practice for Specimen Preparation and Mounting of Wood Products to Assess Surface Burning Characteristics
E2599-09 Practice for Specimen Preparation and Mounting of Reflective Insulation Materials and Radiant Barrier Materials for Building Applications to Assess Surface Burning Characteristics
E2652-09 Test Method for Behavior of Materials in a Tube Furnace with a Cone-shaped Airflow Stabilizer, at 750|SDC
E2653-09 Practice for Conducting an Interlaboratory Study to Determine Precision Estimates for a Fire Test Method with Fewer Than Six Participating Laboratories