|
Table of Contents
D0642-00R05E01 Test Method for Determining Compressive Resistance of Shipping Containers, Components, and Unit Loads
D0880-92R02 Test Method for Impact Testing for Shipping Containers and Systems
D0951-99R04 Test Method for Water Resistance of Shipping Containers by Spray Method
D0996-04 Terminology of Packaging and Distribution Environments
D0999-07 Test Methods for Vibration Testing of Shipping Containers
D1185-98AR03 Test Methods for Pallets and Related Structures Employed in Materials Handling and Shipping
D1434-82R03 Test Method for Determining Gas Permeability Characteristics of Plastic Film and Sheeting
D1596-97R03 Test Method for Dynamic Shock Cushioning Characteristics of Packaging Material
D1974-98R03 Practice for Methods of Closing, Sealing, and Reinforcing Fiberboard Boxes
D1975-95R06 Test Method for Environmental Stress Crack Resistance of Plastic Injection Molded Open Head Pails
D2063-91R02 Test Methods for Measurement of Torque Retention for Packages with Continuous Thread Closures
D2221-01 Test Method for Creep Properties of Package Cushioning Materials
D2658-04 Test Method for Determining Interior Dimensions of Fiberboard Boxes (Box Gage Method)
D2860_D2860M-04 Test Method for Adhesion of Pressure-Sensitive Tape to Fiberboard at 90|SD Angle and Constant Stress
D3060-94R05 Test Method for Pressure Drop Rate of Compressed Gas-Propelled Products
D3061-97R03 Guide for Three-Piece Steel and Tinplate Straight-Wall and Necked-In Aerosol Cans
D3064-97R03 Terminology Relating To Aerosol Products
D3065-01R06 Test Methods for Flammability of Aerosol Products
D3069-94R05 Test Method for Delivery Rate of Aerosol Products
D3070-00R05 Test Method of Rapid Pressure Determination of Pressurized Products
D3076-00R05 Test Methods for Effective Crimping on Outside Crimped Valves of Aerosol Containers
D3078-02 Test Method for Determination of Leaks in Flexible Packaging by Bubble Emission
D3079-94R03 Test Method for Water Vapor Transmission of Flexible Heat-Sealed Packages for Dry Products
D3089-97R03 Practice for Determining the A-D Dimension of Aerosol Valve Dip Tubes
D3090-72R03 Practice for Storage Testing of Aerosol Products
D3091-72R03 Practice for Safe Filling of Low-Pressure Pressurized Products
D3094-00R05 Test Method for Seepage Rate of Aerosol Products
D3103-07 Test Method for Thermal Insulation Performance of Distribution Packages
D3198-97R07 Test Method for Application and Removal Torque of Threaded or Lug-Style Closures
D3330_D3330M-04 Test Method for Peel Adhesion of Pressure-Sensitive Tape
D3332-99R04 Test Methods for Mechanical-Shock Fragility of Products, Using Shock Machines
D3469-97R07 Test Methods for Measurement of Vertical Downward Forces to Disengage Type IIA Lug-Style Child-Resistant Closures
D3470-97R07 Test Method for Measurement of Removal Lug Strippage of Type IIA Child-Resistant Closures
D3472-97R07 Test Method for Reverse-Ratchet Torque of Type IA Child-Resistant Closures
D3474-90R07 Practice for Calibration and Use of Torque Meters Used in Packaging Applications
D3475-08 Classification of Child-Resistant Packages
D3481-06 Test Method for Manual Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
D3580-95R04 Test Methods for Vibration (Vertical Linear Motion) Test of Products
D3611-06 Practice for Accelerated Aging of Pressure-Sensitive Tapes
D3652_D3652M-01R06 Test Method for Thickness of Pressure-Sensitive Tapes
D3654_D3654M-06 Test Methods for Shear Adhesion of Pressure-Sensitive Tapes
D3715_D3715M-98R04 Practice for Quality Assurance of Pressure-Sensitive Tapes
D3759_D3759M-05 Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape
D3810-97R07 Test Method for Minimum Application Torque of Type IA Child-Resistant Closures
D3811_D3811M-96R06 Test Method for Unwind Force of Pressure-Sensitive Tapes
D3813_D3813M-98R07 Test Method for Curling, Twisting, and Tubing on Unwind of Pressure-Sensitive Tapes
D3815_D3815M-05 Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Open-Flame Carbon-Arc Exposure Apparatus
D3816_D3816M-96R07 Test Method for Water Penetration Rate of Pressure-Sensitive Tapes
D3833_D3833M-96R06 Test Method for Water Vapor Transmission of Pressure-Sensitive Tapes
D3889_D3889M-96R06 Test Method for Adherence to Linerboard of Pressure-Sensitive Tape at Low Temperature
D3890-05 Test Method for Number of Strokes to Prime a Mechanical Pump Dispenser
D3950-07 Specification for Strapping, Nonmetallic (and Joining Methods)
D3951-98R04 Practice for Commercial Packaging
D3953-07A Specification for Strapping, Flat Steel and Seals
D3968-97R07 Test Method for Monitoring of Rotational Torque of Type IIIA Child-Resistant Closures
D3985-05 Test Method for Oxygen Gas Transmission Rate Through Plastic Film and Sheeting Using a Coulometric Sensor
D4003-98R03 Test Methods for Programmable Horizontal Impact Test for Shipping Containers and Systems
D4041-05 Practice for Determining Spray Patterns of Mechanical Pump Dispensers
D4168-95R02 Test Methods for Transmitted Shock Characteristics of Foam-in-Place Cushioning Materials
D4169-05 Practice for Performance Testing of Shipping Containers and Systems
D4267-07 Specification for Labels for Small-Volume (100 mL or Less) Parenteral Drug Containers
D4279-95R03 Test Methods for Water Vapor Transmission of Shipping Containers\MConstant and Cycle Methods
D4332-01R06 Practice for Conditioning Containers, Packages, or Packaging Components for Testing
D4333-05 Test Method for the Compatibility of Mechanical Pump Dispenser Components
D4334-05 Test Method for the Determination of the Dip Tube Retention of a Mechanical Pump Dispenser
D4335-99R06 Test Method for Determination of Component Retention of a Mechanical Pump Dispenser
D4336-05 Test Methods for Determination of the Output Per Stroke of a Mechanical Pump Dispenser
D4504-94R05 Specification for Molded Polyethylene Open-Head-Pails for Industrial Shipping of Nonhazardous Goods
D4577-05 Test Method for Compression Resistance of a Container Under Constant Load
D4649-03 Guide for Selection and Use of Stretch Wrap Films
D4675-06E01 Guide for Selection and Use of Flat Strapping Materials
D4727_D4727M-07 Specification for Corrugated and Solid Fiberboard Sheet Stock (Container Grade) and Cut Shapes
D4728-06 Test Method for Random Vibration Testing of Shipping Containers
D4774-06 Specification for User Applied Drug Labels in Anesthesiology
D4775-04 Specification for Identification and Configuration of Prefilled Syringes and Delivery Systems for Drugs (Excluding Pharmacy Bulk Packages)
D4919-03 Guide for Testing of Hazardous Materials Packagings
D4991-07 Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
D5022-07 Specification for Identification of Vials and Ampoules Containing Concentrated Solutions of Drugs to be Diluted Before Use
D5077-90R03 Terminology Relating to Electrostatic Discharge (ESD) Packaging Materials
D5094-04 Test Methods for Gross Leakage of Liquids from Containers with Threaded or Lug-Style Closures
D5105-05 Practice for Performing Accelerated Outdoor Weathering of Pressure-Sensitive Tapes Using Concentrated Natural Sunlight
D5112-98R03 Test Method for Vibration (Horizontal Linear Motion) Test of Products
D5118_D5118M-05AE01 Practice for Fabrication of Fiberboard Shipping Boxes
D5168-03 Practice for Fabrication and Closure of Triple-Wall Corrugated Fiberboard Containers
D5264-98R04 Practice for Abrasion Resistance of Printed Materials by the Sutherland Rub Tester
D5265-03 Test Method for Bridge Impact Testing
D5276-98R04 Test Method for Drop Test of Loaded Containers by Free Fall
D5277-92R02 Test Method for Performing Programmed Horizontal Impacts Using an Inclined Impact Tester
D5330_D5330M-06 Specification for Pressure-Sensitive Tape for Packaging, Filament-Reinforced
D5331-03 Test Method for Evaluation of Mechanical Handling of Unitized Loads Secured with Stretch Wrap Films
D5375_D5375M-98R04 Test Methods for Liner Removal at High Speeds from Pressure-Sensitive Label Stock
D5414-95R07 Test Method for Evaluation of Horizontal Impact Performance of Load Unitizing Stretch Wrap Films
D5415-95R07 Test Method for Evaluating Load Containment Performance of Stretch Wrap Films by Vibration Testing
D5416-95R07 Test Method for Evaluating Abrasion Resistance of Stretch Wrap Films by Vibration Testing
D5445-05 Practice for Pictorial Markings for Handling of Goods
D5458-95R07 Test Method for Peel Cling of Stretch Wrap Film
D5459-95R07 Test Method for Machine Direction Elastic Recovery and Permanent Deformation and Stress Retention of Stretch Wrap Film
D5486_D5486M-06 Specification for Pressure-Sensitive Tape for Packaging, Box Closure, and Sealing
D5487-98R02 Test Method for Simulated Drop of Loaded Containers by Shock Machines
D5570-94R05 Test Method for Water Resistance of Tape and Adhesives Used as Box Closure
D5571-94R05 Test Method for Environmental Stress Crack Resistance (ESCR) of Plastic Tighthead Drums Not Exceeding 60 Gal (227 L) in Rated Capacity
D5639_D5639M-05 Practice for Selection of Corrugated Fiberboard Materials and Box Construction Based on Performance Requirements
D5728-00R06 Practices for Securement of Cargo in Intermodal and Unimodal Surface Transport
D5748-95R07 Test Method for Protrusion Puncture Resistance of Stretch Wrap Film
D5749-01R06 Specification for Reinforced and Plain Gummed Tape for Sealing and Securing
D5750_D5750M-95R06 Guide for Width and Length of Pressure-Sensitive Tape
D6039_D6039M-02 Specification for Crates, Wood, Open and Covered
D6055-96R07E01 Test Methods for Mechanical Handling of Unitized Loads and Large Shipping Cases and Crates
D6123_D6123M-97R07 Specification for Pressure-Sensitive Tape for Light-Duty Packaging and General Purpose Masking
D6179-07 Test Methods for Rough Handling of Unitized Loads and Large Shipping Cases and Crates
D6198-07 Guide for Transport Packaging Design
D6199-07 Practice for Quality of Wood Members of Containers and Pallets
D6251_D6251M-07E02 Specification for Wood-Cleated Panelboard Shipping Boxes
D6252_D6252M-98R04 Test Method for Peel Adhesion of Pressure-Sensitive Label Stocks at a 90|SD Angle
D6253-05A Practice for Treatment and/or Marking of Wood Packaging Materials
D6254_D6254M-07 Specification for Wirebound Pallet-Type Wood Boxes
D6255_D6255M-05 Specification for Steel or Aluminum Slotted Angle Crates
D6256_D6256M-99R05 Specification for Wood-Cleated Shipping Boxes with Skidded, Load-Bearing Bases
D6295_D6295M-98R04 Test Method for Dispensability of Light\NDuty Pressure\NSensitive Film Tape
D6344-04 Test Method for Concentrated Impacts to Transport Packages
D6398-08 Practice to Enhance Identification of Drug Names on Labels
D6534-05 Test Method for Determining the Peak Force-to-Actuate of a Mechanical Pump Dispenser
D6535-05 Test Method for Determining the Dip Tube Length of a Mechanical Pump Dispenser
D6536-00R05 Test Method for Measuring the Dip Tube Length of a Mechanical Pump Dispenser
D6537-00R06 Practice for Instrumented Package Shock Testing For Determination of Package Performance
D6551_D6551M-05 Practice for Accelerated Weathering of Pressure-Sensitive Tapes by Xenon-Arc Exposure Apparatus
D6573_D6573M-01R07 Specification for General Purpose Wirebound Shipping Boxes
D6590_D6590M-00R06 Specification for Pressure-Sensitive Tape for Sealing Fiber Containers and Cans
D6633-05 Test Method for Basic Functional Stability of a Mechanical Pump Dispenser
D6653-01R06 Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
D6654-05 Test Method for Basic Storage Stability of a Mechanical Pump Dispenser
D6655-01R07 Terminology Relating to Mechanical Pump Dispensers
D6787-02R07 Specification for Repositionable Note Pad
D6788-02R07 Specification for Repositionable Pressure-Sensitive Flags
D6804-02R07 Guide for Hand Hole Design in Corrugated Boxes
D6834-02 Test Method for Determining Product Leakage from a Package with a Mechanical Pump Dispenser
D6880-05 Specification for Wood Boxes
D6881-03 Classification for Standard Plastics Industry Bulk Box/Pallet Unit Size Classified By Bulk Density
D7030-04 Test Method for Short Term Creep Performance of Corrugated Fiberboard Containers Under Constant Load Using a Compression Test Machine
D7077-04 Test Method for Evaluation of Drop Size by weight of Solutions and Suspensions
D7257-06 Test Method for Automated Shelling Two-Piece Child-Resistant Closures That Are Activated by Two Simultaneous Dissimilar Motions
D7298-06 Test Method for Measurement of Comparative Legibility by Means of Polarizing Filter Instrumentation
D7386-08 Practice for Performance Testing of Packages for Single Parcel Delivery Systems
D7387-07 Test Method for Vibration Testing of Intermediate Bulk Containers (IBCs) Used for Shipping Liquid Hazardous Materials (Dangerous Goods)
E0171-94R07 Specification for Standard Atmospheres for Conditioning and Testing Flexible Barrier Materials
E0398-03 Test Method for Water Vapor Transmission Rate of Sheet Materials Using Dynamic Relative Humidity Measurement
F0017-07A Terminology Relating to Flexible Barrier Packaging
F0034-02R07 Practice for Construction of Test Cell for Liquid Extraction of Flexible Barrier Materials
F0088-07A Test Method for Seal Strength of Flexible Barrier Materials
F0099-07 Guide for Writing a Specification for Flexible Barrier Rollstock Materials
F0119-82R02 Test Method for Rate of Grease Penetration of Flexible Barrier Materials (Rapid Method)
F0372-99R03 Test Method for Water Vapor Transmission Rate of Flexible Barrier Materials Using an Infrared Detection Technique
F0392-93R04 Test Method for Flex Durability of Flexible Barrier Materials
F0874-98R03 Test Method for Temperature Measurement and Profiling for Microwave Susceptors
F0904-98R03 Test Method for Comparison of Bond Strength or Ply Adhesion of Similar Laminates Made from Flexible Materials
F1115-95R08E01 Test Method for Determining the Carbon Dioxide Loss of Beverage Containers
F1140-07 Test Methods for Internal Pressurization Failure Resistance of Unrestrained Packages
F1249-06 Test Method for Water Vapor Transmission Rate Through Plastic Film and Sheeting Using a Modulated Infrared Sensor
F1278-96R03 Guide for Use and Handling of Flexible Retort Food Pouches in the Processing Environment
F1306-90R02 Test Method for Slow Rate Penetration Resistance of Flexible Barrier Films and Laminates
F1307-02R07 Test Method for Oxygen Transmission Rate Through Dry Packages Using a Coulometric Sensor
F1308-98R03 Test Method for Quantitating Volatile Extractables in Microwave Susceptors Used for Food Products
F1317-98R07 Test Method for Calibration of Microwave Ovens
F1349-98R03 Test Method for Nonvolatile Ultraviolet (UV) Absorbing Extractables from Microwave Susceptors
F1416-96R03 Guide for Selection of Time-Temperature Indicators
F1500-98R03 Test Method for Quantitating Non-UV-Absorbing Nonvolatile Extractables from Microwave Susceptors Utilizing Solvents as Food Simulants
F1519-98R03 Test Method for Qualitative Analysis of Volatile Extractables in Microwave Susceptors Used to Heat Food Products
F1608-00R04 Test Method for Microbial Ranking of Porous Packaging Materials (Exposure Chamber Method)
F1884-04 Test Methods for Determining Residual Solvents in Packaging Materials
F1886-98R04 Test Method for Determining Integrity of Seals for Medical Packaging by Visual Inspection
F1921-98R04 Test Methods for Hot Seal Strength (Hot Tack) of Thermoplastic Polymers and Blends Comprising the Sealing Surfaces of Flexible Webs
F1927-07 Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
F1929-98R04 Test Method for Detecting Seal Leaks in Porous Medical Packaging by Dye Penetration
F1980-07 Guide for Accelerated Aging of Sterile Barrier Systems for Medical Devices
F2013-05 Test Method for Determination of Residual Acetaldehyde in Polyethylene Terephthalate Bottle Polymer Using an Automated Static Head-Space Sampling Device and a Capillary GC with a Flame Ionization Detector
F2029-00 Practices for Making Heatseals for Determination of Heatsealability of Flexible Webs as Measured by Seal Strength
F2054-07 Test Method for Burst Testing of Flexible Package Seals Using Internal Air Pressurization Within Restraining Plates
F2095-07E01 Test Methods for Pressure Decay Leak Test for Flexible Packages With and Without Restraining Plates
F2096-04 Test Method for Detecting Gross Leaks in Medical Packaging by Internal Pressurization (Bubble Test)
F2097-07 Guide for Design and Evaluation of Primary Flexible Packaging for Medical Products
F2203-02R07 Test Method for Linear Measurement Using Precision Steel Rule
F2217-02R07 Practice for Coating/Adhesive Weight Determination
F2227-02R07 Test Method for Non-Destructive Detection of Leaks in Non-sealed and Empty Medical Packaging Trays by CO2 Tracer Gas Method
F2228-02R07 Test Method for Non-Destructive Detection of Leaks in Medical Packaging Which Incorporates Porous Barrier Material by CO2 Tracer Gas Method
F2250-03 Practice for Evaluation of Chemical Resistance of Printed Inks and Coatings on Flexible Packaging Materials
F2251-03E01 Test Method for Thickness Measurement of Flexible Packaging Material
F2252-03 Practice for Evaluating Ink or Coating Adhesion to Flexible Packaging Materials Using Tape
F2338-07 Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
F2391-05 Test Method for Measuring Package and Seal Integrity Using Helium as the Tracer Gas
F2475-05 Guide for Biocompatibility Evaluation of Medical Device Packaging Materials
F2476-05 Test Method for the Determination of Carbon Dioxide Gas Transmission Rate (Co 2TR) Through Barrier Materials Using An Infrared Detector
F2559-06 Guide for Writing a Specification for Sterilizable Peel Pouches
F2638-07 Test Method for Using Aerosol Filtration for Measuring the Performance of Porous Packaging Materials as a Surrogate Microbial Barrier
|
