|
Table of Contents
C0581-03 Practice for Determining Chemical Resistance of Thermosetting Resins Used in Glass-Fiber-Reinforced Structures Intended for Liquid Service
C0582-02 Specification for Contact-Molded Reinforced Thermosetting Plastic (RTP) Laminates for Corrosion-Resistant Equipment
D1494-97R01E01 Test Method for Diffuse Light Transmission Factor of Reinforced Plastics Panels
D1527-99R05 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe, Schedules 40 and 80
D1598-02 Test Method for Time-to-Failure of Plastic Pipe Under Constant Internal Pressure
D1599-99R05 Test Method for Resistance to Short-Time Hydraulic Pressure of Plastic Pipe, Tubing, and Fittings
D1694 Specification for for Threads 60|SD (Stub) for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D1785-06 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe, Schedules 40, 80, and 120
D2104-03 Specification for Polyethylene (PE) Plastic Pipe, Schedule 40
D2105-01R07E01 Test Method for Longitudinal Tensile Properties of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Tube
D2122-98R04 Test Method for Determining Dimensions of Thermoplastic Pipe and Fittings
D2143-00R05E01 Test Method for Cyclic Pressure Strength of Reinforced, Thermosetting Plastic Pipe
D2152-95R03 Test Method for Adequacy of Fusion of Extruded Poly(Vinyl Chloride) (PVC) Pipe and Molded Fittings by Acetone Immersion
D2235-04 Specification for Solvent Cement for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe and Fittings
D2239-03 Specification for Polyethylene (PE) Plastic Pipe (SIDR-PR) Based on Controlled Inside Diameter
D2241-05 Specification for Poly(Vinyl Chloride) (PVC) Pressure-Rated Pipe (SDR Series)
D2282 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Plastic Pipe
D2290-04 Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe by Split Disk Method
D2310-06 Classification for Machine-Made |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2321-05 Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
D2412-02 Test Method for Determination of External Loading Characteristics of Plastic Pipe by Parallel-Plate Loading
D2444-99R05 Test Method for Determination of the Impact Resistance of Thermoplastic Pipe and Fittings by Means of a Tup (Falling Weight)
D2447-03 Specification for Polyethylene (PE) Plastic Pipe, Schedules 40 and 80, Based on Outside Diameter
D2464-06 Specification for Threaded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2466-06 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40
D2467-06 Specification for Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 80
D2513-07A Specification for Thermoplastic Gas Pressure Pipe, Tubing, and Fittings
D2517-06 Specification for Reinforced Epoxy Resin Gas Pressure Pipe and Fittings
D2564-04E01 Specification for Solvent Cements for Poly(Vinyl Chloride) (PVC) Plastic Piping Systems
D2609-02 Specification for Plastic Insert Fittings for Polyethylene (PE) Plastic Pipe
D2657-07 Practice for Heat Fusion Joining of Polyolefin Pipe and Fittings
D2661-06 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe and Fittings
D2665-07 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2672-96AR03 Specification for Joints for IPS PVC Pipe Using Solvent Cement
D2680-01 Specification for Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Composite Sewer Piping
D2683-04 Specification for Socket-Type Polyethylene Fittings for Outside Diameter-Controlled Polyethylene Pipe and Tubing
D2729-03 Specification for Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D2737-03 Specification for Polyethylene (PE) Plastic Tubing
D2749-02 Symbols for Dimensions of Plastic Pipe Fittings
D2751-05 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Sewer Pipe and Fittings
D2774-04E01 Practice for Underground Installation of Thermoplastic Pressure Piping
D2837-04E01 Test Method for Obtaining Hydrostatic Design Basis for Thermoplastic Pipe Materials or Pressure Design Basis for Thermoplastic Pipe Products
D2846_D2846M-06 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Hot- and Cold-Water Distribution Systems
D2852-95R02 Specification for Styrene-Rubber (SR) Plastic Drain Pipe and Fittings
D2855-96R02 Practice for Making Solvent-Cemented Joints with Poly(Vinyl Chloride) (PVC) Pipe and Fittings
D2924-01R06 Test Method for External Pressure Resistance of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2925-01R07E01 Test Method for Beam Deflection of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe Under Full Bore Flow
D2949-01AE01 Specification for 3.25-in. Outside Diameter Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent Pipe and Fittings
D2992-06 Practice for Obtaining Hydrostatic or Pressure Design Basis for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Fittings
D2996-01R07E01 Specification for Filament-Wound |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D2997-01R07E01 Specification for Centrifugally Cast |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D3034-06 Specification for Type PSM Poly(Vinyl Chloride) (PVC) Sewer Pipe and Fittings
D3035-06 Specification for Polyethylene (PE) Plastic Pipe (DR-PR) Based on Controlled Outside Diameter
D3122-95R02 Specification for Solvent Cements for Styrene-Rubber (SR) Plastic Pipe and Fittings
D3138-04 Specification for Solvent Cements for Transition Joints Between Acrylonitrile-Butadiene-Styrene (ABS) and Poly(Vinyl Chloride) (PVC) Non-Pressure Piping Components
D3139-98R05 Specification for Joints for Plastic Pressure Pipes Using Flexible Elastomeric Seals
D3212-96AR03E01 Specification for Joints for Drain and Sewer Plastic Pipes Using Flexible Elastomeric Seals
D3261-03 Specification for Butt Heat Fusion Polyethylene (PE) Plastic Fittings for Polyethylene (PE) Plastic Pipe and Tubing
D3262-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer Pipe
D3299-00 Specification for Filament-Wound Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D3309-96AR02 Specification for Polybutylene (PB) Plastic Hot- and Cold-Water Distribution Systems
D3311-06A Specification for Drain, Waste, and Vent (DWV) Plastic Fittings Patterns
D3485-02 Specification for Smooth-Wall Coilable Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D3517-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe
D3567-97R06 Practice for Determining Dimensions of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Pipe and Fittings
D3678-97R01 Specification for Rigid Poly(Vinyl Chloride) (PVC) Interior-Profile Extrusions
D3679-06A Specification for Rigid Poly(Vinyl Chloride) (PVC) Siding
D3681-06 Test Method for Chemical Resistance of |P`Fiberglass|P' (Glass\NFiber\NReinforced Thermosetting-Resin) Pipe in a Deflected Condition
D3753-05E01 Specification for Glass-Fiber-Reinforced Polyester Manholes and Wetwells
D3754-06 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Sewer and Industrial Pressure Pipe
D3839-02E01 Guide for Underground Installation of |P`Fiberglass|P' (Glass-FiberReinforced Thermosetting-Resin) Pipe
D3840-01R05 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Fittings for Nonpressure Applications
D3841-97R01 Specification for Glass-Fiber-Reinforced Polyester Plastic Panels
D3982-03 Specification for Contact Molded |P`Fiberglass|P' (Glass Fiber Reinforced Thermosetting Resin) Duct and Hoods
D4024-05 Specification for Machine Made |P`Fiberglass'' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D4068-01 Specification for Chlorinated Polyethylene (CPE) Sheeting for Concealed Water-Containment Membrane
D4097-01 Specification for Contact-Molded Glass-Fiber-Reinforced Thermoset Resin Corrosion-Resistant Tanks
D4161-01R05 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe Joints Using Flexible Elastomeric Seals
D4166-99R04E01 Test Method for Measurement of Thickness of Nonmagnetic Materials by Means of a Digital Magnetic Intensity Instrument
D4167-97R02 Specification for Fiber-Reinforced Plastic Fans and Blowers
D4226-05 Test Methods for Impact Resistance of Rigid Poly(Vinyl Chloride) (PVC) Building Products
D4398-07 Test Method for Determining the Chemical Resistance of Fiberglass-Reinforced Thermosetting Resins by One-Side Panel Exposure
D4477-04A Specification for Rigid (Unplasticized) Poly(Vinyl Chloride) (PVC) Soffit
D4495-00R05 Test Method for Impact Resistance of Poly(Vinyl Chloride) (PVC) Rigid Profiles by Means of a Falling Weight
D4551-96R01 Specification for Poly(Vinyl Chloride) (PVC) Plastic Flexible Concealed Water-Containment Membrane
D4726-02 Specification for Rigid Poly(Vinyl Chloride) (PVC) Exterior-Profile Extrusions Used for Assembled Windows and Doors
D4756-06 Practice for Installation of Rigid Poly(Vinyl Chloride) (PVC) Siding and Soffit
D4803-97R02E01 Test Method for Predicting Heat Buildup in PVC Building Products
D5206-06A Test Method for Windload Resistance of Rigid Plastic Siding
D5319-97R01 Specification for Glass-Fiber Reinforced Polyester Wall and Ceiling Panels
D5364-93R02 Guide for Design, Fabrication, and Erection of Fiberglass Reinforced Plastic Chimney Liners with Coal-Fired Units
D5365-06 Test Method for Long-Term Ring-Bending Strain of |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe
D5421-05 Specification for Contact Molded |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Flanges
D5677-05 Specification for Fiberglass (Glass-Fiber-Reinforced Thermosetting-Resin) Pipe and Pipe Fittings, Adhesive Bonded Joint Type, for Aviation Jet Turbine Fuel Lines
D5685-05 Specification for |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting-Resin) Pressure Pipe Fittings
D5813-04 Specification for Cured-In-Place Thermosetting Resin Sewer Piping Systems
D5926-04 Specification for Poly (Vinyl Chloride) (PVC) Gaskets for Drain, Waste, and Vent (DWV), Sewer, Sanitary, and Storm Plumbing Systems
D6041-97R02 Specification for Contact-Molded |P`Fiberglass|P' (Glass-Fiber-Reinforced Thermosetting Resin) Corrosion Resistant Pipe and Fittings
D6070-02 Test Methods for Physical Properties of Smooth-Wall, Coilable, Polyethylene (PE) Conduit (Duct) for Preassembled Wire and Cable
D6777-02 Test Method for Relative Rigidity of Poly(Vinyl Chloride)(PVC) Siding
D6783-05 Specification for Polymer Concrete Pipe
D6864-03AE01 Specification for Color and Appearance Retention of Solid Colored Plastic Siding Products
D7251-06E01 Specification for Color and Appearance Retention of Variegated Color Plastic Siding Products
D7254-07 Specification for Polypropylene (PP) Siding
F0402-05 Practice for Safe Handling of Solvent Cements, Primers, and Cleaners Used for Joining Thermoplastic Pipe and Fittings
F0405-05 Specification for Corrugated Polyethylene (PE) Pipe and Fittings
F0409-02 Specification for Thermoplastic Accessible and Replaceable Plastic Tube and Tubular Fittings
F0412-06 Terminology Relating to Plastic Piping Systems
F0437-06 Specification for Threaded Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F0438-04 Specification for Socket-Type Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 40
F0439-06 Specification for Chlorinated Poly (Vinyl Chloride) (CPVC) Plastic Pipe Fittings, Schedule 80
F0441_F0441M-02 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe, Schedules 40 and 80
F0442_F0442M-99R05 Specification for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe (SDR\NPR)
F0449-02E01 Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
F0477-07 Specification for Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F0480-06B Specification for Thermoplastic Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR), SCH 40 and SCH 80
F0481-97R02 Practice for Installation of Thermoplastic Pipe and Corrugated Pipe in Septic Tank Leach Fields
F0493-04 Specification for Solvent Cements for Chlorinated Poly(Vinyl Chloride) (CPVC) Plastic Pipe and Fittings
F0512-06 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Conduit and Fittings for Underground Installation
F0585-94R07 Practice for Insertion of Flexible Polyethylene Pipe Into Existing Sewers
F0610_F0610M-00AR05 Test Method for Evaluating the Quality of Molded Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings by the Heat Reversion Technique
F0628-06E01 Specification for Acrylonitrile-Butadiene-Styrene (ABS) Schedule 40 Plastic Drain, Waste, and Vent Pipe With a Cellular Core
F0645-04 Guide for Selection, Design, and Installation of Thermoplastic Water- Pressure Piping Systems
F0656-02 Specification for Primers for Use in Solvent Cement Joints of Poly(Vinyl Chloride) (PVC) Plastic Pipe and Fittings
F0667-06 Specification for Large Diameter Corrugated Polyethylene Pipe and Fittings
F0679-06A Specification for Poly(Vinyl Chloride) (PVC) Large-Diameter Plastic Gravity Sewer Pipe and Fittings
F0689-97R04 Practice for Determination of the Temperature of Above-Ground Plastic Gas Pressure Pipe Within Metallic Casings
F0690-86R03E02 Practice for Underground Installation of Thermoplastic Pressure Piping Irrigation Systems
F0699 Practice for Accelerated Conditioning of Polybutylene Pipe and Tubing for Subsequent Quality Control Testing
F0714-06A Specification for Polyethylene (PE) Plastic Pipe (SDR-PR) Based on Outside Diameter
F0725-03E01 Practice for Drafting Impact Test Requirements In Thermoplastic Pipe And Fittings Standards
F0758-95R07E01 Specification for Smooth-Wall Poly(Vinyl Chloride) (PVC) Plastic Underdrain Systems for Highway, Airport, and Similar Drainage
F0771-99R05 Specification for Polyethylene (PE) Thermoplastic High-Pressure Irrigation Pipeline Systems
F0794-03 Specification for Poly(Vinyl Chloride) (PVC) Profile Gravity Sewer Pipe and Fittings Based on Controlled Inside Diameter
F0810-07 Specification for Smoothwall Polyethylene (PE) Pipe for Use in Drainage and Waste Disposal Absorption Fields
F0876-06 Specification for Crosslinked Polyethylene (PEX) Tubing
F0877-07 Specification for Crosslinked Polyethylene (PEX) Plastic Hot- and Cold-Water Distribution Systems
F0891-07 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Plastic Pipe With a Cellular Core
F0894-07 Specification for Polyethylene (PE) Large Diameter Profile Wall Sewer and Drain Pipe
F0905-04 Practice for Qualification of Polyethylene Saddle-Fused Joints
F0913-02E01 Specification for Thermoplastic Elastomeric Seals (Gaskets) for Joining Plastic Pipe
F0948-94R06 Test Method for Time-to-Failure of Plastic Piping Systems and Components Under Constant Internal Pressure With Flow
F0949-06A Specification for Poly(Vinyl Chloride) (PVC) Corrugated Sewer Pipe With a Smooth Interior and Fittings
F1025-94R06 Guide for Selection and Use of Full-Encirclement-Type Band Clamps for Reinforcement or Repair of Punctures or Holes in Polyethylene Gas Pressure Pipe
F1041-02 Guide for Squeeze-Off of Polyolefin Gas Pressure Pipe and Tubing
F1055-98R06 Specification for Electrofusion Type Polyethylene Fittings for Outside Diameter Controlled Polyethylene Pipe and Tubing
F1056-04 Specification for Socket Fusion Tools for Use in Socket Fusion Joining Polyethylene Pipe or Tubing and Fittings
F1057-87R05 Practice for Estimating the Quality of Extruded Poly (Vinyl Chloride) (PVC) Pipe by the Heat Reversion Technique
F1176-01E01 Practice for Design and Installation of Underground Thermoplastic Irrigation Systems With Maximum Working Pressure of 125 psi
F1216-07B Practice for Rehabilitation of Existing Pipelines and Conduits by the Inversion and Curing of a Resin-Impregnated Tube
F1248 Test Method for Determination of Environmental Stress Crack Resistance (ESCR) of Polyethylene Pipe
F1281-07 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene (PEX-AL-PEX) Pressure Pipe
F1282-06 Specification for Polyethylene/Aluminum/Polyethylene (PE-AL-PE) Composite Pressure Pipe
F1290-98AR04 Practice for Electrofusion Joining Polyolefin Pipe and Fittings
F1335-04 Specification for Pressure-Rated Composite Pipe and Fittings for Elevated Temperature Service
F1336-07 Specification for Poly(Vinyl Chloride) (PVC) Gasketed Sewer Fittings
F1365-91R05 Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
F1380-95AR02E01 Specification for Metal Insert Fittings for Polybutylene (PB) Tubing
F1412-01E01 Specification for Polyolefin Pipe and Fittings for Corrosive Waste Drainage Systems
F1417-92R05 Test Method for Installation Acceptance of Plastic Gravity Sewer Lines Using Low-Pressure Air
F1429-99R05 Test Method for Assembly Force of Plastic Underground Conduit Joints That Use Flexible Elastomeric Seals Located in the Bell
F1473-07 Test Method for Notch Tensile Test to Measure the Resistance to Slow Crack Growth of Polyethylene Pipes and Resins
F1483-05 Specification for Oriented Poly(Vinyl Chloride), PVCO, Pressure Pipe
F1488-03 Specification for Coextruded Composite Pipe
F1498-00E01 Specification for Taper Pipe Threads 60|SD for Thermoplastic Pipe and Fittings
F1499-01 Specification for Coextruded Composite Drain, Waste, and Vent Pipe (DWV)
F1504-02 Specification for Folded Poly(Vinyl Chloride) (PVC) Pipe for Existing Sewer and Conduit Rehabilitation
F1533-01 Specification for Deformed Polyethylene (PE) Liner
F1545-97R03 Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges
F1563-94R07 Specification for Tools to Squeeze-off Polyethylene (PE) Gas Pipe or Tubing
F1588-96R02 Test Method for Constant Tensile Load Joint Test (CTLJT)
F1606-05 Practice for Rehabilitation of Existing Sewers and Conduits with Deformed Polyethylene (PE) Liner
F1668-96R02 Guide for Construction Procedures for Buried Plastic Pipe
F1673-04 Specification for Polyvinylidene Fluoride (PVDF) Corrosive Waste Drainage Systems
F1674-05 Test Method for Joint Restraint Products for Use with PVC Pipe
F1675-03 Practice for Life-Cycle Cost Analysis of Plastic Pipe Used for Culverts, Storm Sewers, and Other Buried Conduits
F1697-07 Specification for Poly(Vinyl Chloride) (PVC) Profile Strip for Machine Spiral-Wound Liner Pipe Rehabilitation of Existing Sewers and Conduit
F1698-02 Practice for Installation of Poly(Vinyl Chloride)(PVC) Profile Strip Liner and Cementitious Grout for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1732-96R05 Specification for Poly(Vinyl Chloride) (PVC) Sewer and Drain Pipe Containing Recycled PVC Material
F1733-96R02 Specification for Butt Heat Fusion Polyamide(PA) Plastic Fitting for Polyamide(PA) Plastic Pipe and Tubing
F1734-03 Practice for Qualification of a Combination of Squeeze Tool, Pipe, and Squeeze-Off Procedures to Avoid Long-Term Damage in Polyethylene (PE) Gas Pipe
F1735-02E01 Specification for Poly (Vinyl Chloride)(PVC) Profile Strip for PVC Liners for Rehabilitation of Existing Man-Entry Sewers and Conduits
F1741-07 Practice for Installation of Machine Spiral Wound Poly (Vinyl Chloride) (PVC) Liner Pipe for Rehabilitation of Existing Sewers and Conduits
F1743-96R03 Practice for Rehabilitation of Existing Pipelines and Conduits by Pulled-in-Place Installation of Cured-in-Place Thermosetting Resin Pipe (CIPP)
F1759-97R04 Practice for Design of High-Density Polyethylene (HDPE) Manholes for Subsurface Applications
F1760-01R05E01 Specification for Coextruded Poly(Vinyl Chloride) (PVC) Non-Pressure Plastic Pipe Having Reprocessed-Recycled Content
F1802-04 Test Method for Performance Testing of Excess Flow Valves
F1803-06 Specification for Poly (Vinyl Chloride)(PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F1804-03 Practice for Determining Allowable Tensile Load for Polyethylene (PE) Gas Pipe During Pull-In Installation\t
F1807-07AE01 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
F1865-02A Specification for Mechanical Cold Expansion Insert Fitting With Compression Sleeve for Cross-linked Polyethylene (PEX) Tubing
F1866-07 Specification for Poly (Vinyl Chloride) (PVC) Plastic Schedule 40 Drainage and DWV Fabricated Fittings
F1867-06 Practice for Installation of Folded/Formed Poly (Vinyl Chloride) (PVC) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1871-02E01 Specification for Folded/Formed Poly (Vinyl Chloride) Pipe Type A for Existing Sewer and Conduit Rehabilitation
F1901-98R04 Specification for Polyethylene (PE) Pipe and Fittings for Roof Drain Systems
F1924-05 Specification for Plastic Mechanical Fittings for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F1947-04 Practice for Installation of Folded Poly (Vinyl Chloride) (PVC) Pipe into Existing Sewers and Conduits
F1948-05 Specification for Metallic Mechanical Fittings for Use on Outside Diameter Controlled Thermoplastic Gas Distribution Pipe and Tubing
F1960-07 Specification for Cold Expansion Fittings with PEX Reinforcing Rings for Use with Cross-linked Polyethylene (PEX) Tubing
F1961-02A Specification for Metal Mechanical Cold Flare Compression Fittings with Disc Spring for Crosslinked Polyethylene (PEX) Tubing
F1962-05 Guide for Use of Maxi-Horizontal Directional Drilling for Placement of Polyethylene Pipe or Conduit Under Obstacles, Including River Crossings
F1970-05 Specification for Special Engineered Fittings, Appurtenances or Valves for use in Poly (Vinyl Chloride) (PVC) or Chlorinated Poly (Vinyl Chloride) (CPVC) Systems
F1973-05 Specification for Factory Assembled Anodeless Risers and Transition Fittings in Polyethylene (PE) and Polyamide 11 (PA11) Fuel Gas Distribution Systems
F1974-04 Specification for Metal Insert Fittings for Polyethylene/Aluminum/Polyethylene and Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Composite Pressure Pipe
F1986-01R06 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hot and Cold Drinking-Water Systems
F1987-01R06 Specification for Multilayer Pipe Type 2, Compression Fittings, and Compression Joints for Hydronic Heating Systems
F2018-00R06 Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
F2019-03 Practice for Rehabilitation of Existing Pipelines and Conduits by the Pulled in Place Installation of Glass Reinforced Plastic (GRP) Cured-in-Place Thermosetting Resin Pipe (CIPP)
F2021-06 Guide for Design and Installation of Plastic Siphonic Roof Drainage Systems
F2023-05 Test Method for Evaluating the Oxidative Resistance of Crosslinked Polyethylene (PEX) Tubing and Systems to Hot Chlorinated Water
F2080-05 Specification for Cold-Expansion Fittings With Metal Compression-Sleeves for Cross-Linked Polyethylene (PEX) Pipe
F2098-04E01 Specification for Stainless Steel Clamps for Securing SDR9 Cross-linked Polyethylene (PEX) Tubing to Metal Insert Fittings
F2135-01R07 Specification for Molded Drain, Waste, and Vent (DWV) Short-Pattern Plastic Fittings
F2136-05 Test Method for Notched, Constant Ligament-Stress (NCLS) Test to Determine Slow-Crack-Growth Resistance of HDPE Resins or HDPE Corrugated Pipe
F2138-01E01 Specification for Excess Flow Valves for Natural Gas Service
F2145-01 Specification for Polyamide 11 (PA 11) Mechanical Fittings for Use on Outside Diameter Controlled Polyamide 11 Pipe and Tubing
F2158-01 Specification for Residential Central-Vacuum Tube and Fittings
F2159-05 Specification for Plastic Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing
F2160-05 Specification for Solid Wall High Density Polyethylene (HDPE) Conduit Based on Controlled Outside Diameter (OD)
F2164-02R07 Practice for Field Leak Testing of Polyethylene (PE) Pressure Piping Systems Using Hydrostatic Pressure
F2165-02 Specification for Flexible Pre-Insulated Piping
F2176-02 Specification for Mechanical Couplings Used on Polyethylene Conduit, Duct and Innerduct
F2206-02 Specification for Fabricated Fittings of Butt-Fused Polyethylene (PE) Plastic Pipe, Fittings, Sheet Stock, Plate Stock, or Block Stock
F2207-06 Specification for Cured-in-Place Pipe Lining System for Rehabilitation of Metallic Gas Pipe
F2231-02E01 Test Method for Charpy Impact Test on Thin Specimens of Polyethylene Used in Pressurized Pipes
F2261-06 Test Method for Pressure Rating Poly(Vinyl Chloride) (PVC) Plastic Pipe Fittings, Schedule 40 and 80 Socket-Type.
F2262-05 Specification for Crosslinked Polyethylene/Aluminum/Crosslinked Polyethylene Tubing OD Controlled SDR9
F2263-07E01 Test Method for Evaluating the Oxidative Resistance of Polyethylene (PE) Pipe to Chlorinated Water
F2306_F2306M-07 Specification for 12 to 60 in. \[300 to 1500 mm\] Annular Corrugated Profile-Wall Polyethylene (PE) Pipe and Fittings for Gravity-Flow Storm Sewer and Subsurface Drainage Applications
F2307-03 Specification for Series 10 Poly(Vinyl Chloride) (PVC) Closed Profile Gravity Pipe and Fittings Based on Controlled Inside Diameter
F2330-04 Test Method for Evaluating the Oxidative Resistance of Multilayer Polyolefin Tubing to Hot Chlorinated Water
F2331-04 Test Method for Determining Chemical Compatibility of Thread Sealants with Thermoplastic Threaded Pipe and Fittings Materials
F2389-07 Specification for Pressure-rated Polypropylene (PP) Piping Systems
F2390-07 Specification for Poly(Vinyl Chloride) (PVC) Plastic Drain, Waste, and Vent (DWV) Pipe and Fittings Having Post-Industrial Recycle Content
F2418-05 Specification for Polypropylene (PP) Corrugated Wall Stormwater Collection Chambers
F2433-05 Test Method for Determining Thermoplastic Pipe Wall Stiffness
F2434-05 Specification for Metal Insert Fittings Utilizing a Copper Crimp Ring for SDR9 Cross-linked Polyethylene (PEX) Tubing and SDR9 Cross-linked Polyethylene/Aluminum/Cross-linked Polyethylene (PEX-AL-PEX) Tubing
F2435-07 Specification for Steel Reinforced Polyethylene (PE) Corrugated Pipe
F2487-06 Practice for Infiltration and Exfiltration Acceptance Testing of Installed Corrugated High Density Polyethylene Pipelines
F2509-06 Specification for Field-assembled Anodeless Riser Kits for Use on Outside Diameter Controlled Polyethylene Gas Distribution Pipe and Tubing
F2510_F2510M-07 Specification for Resilient Connectors Between Reinforced Concrete Manhole Structures and Corrugated High Density Polyethylene Drainage Pipes
F2536-06B Guide for Installing Plastic DWV Piping Suspended from On-Grade Slabs
F2561-06 Practice for Rehabilitation of a Sewer Service Lateral and Its Connection to the Main Using a One Piece Main and Lateral Cured-in-Place Liner
F2562_F2562M-07 Specification for Steel Reinforced Thermoplastic Ribbed Pipe and Fittings for Non-Pressure Drainage and Sewerage
F2599-06 Practice for The Sectional Repair of Damaged Pipe By Means of An Inverted Cured-In-Place Liner
F2600-06 Specification for Electrofusion Type Polyamide-11 Fittings for Outside Diameter Controlled Polyamide-11 Pipe and Tubing
F2620-06 Practice for Heat Fusion Joining of Polyethylene Pipe and Fittings
F2623-07 Specification for Polyethylene of Raised Temperature (PE-RT) SDR 9 Tubing
F2634-07 Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
F2648_F2648M-07 Specification for 2 to 60 inch \[50 to 1500 mm\] Annular Corrugated Profile Wall Polyethylene (PE) Pipe and Fittings for Land Drainage Applications
F2658-07 Specification for Type PSM Poly(Vinyl Chloride) (PVC) SDR 51 and SDR 64 Sewer Pipe and Fittings
|
